SAP is printing extra blank page

When i print from windows server/print server/host printer the print is normal but when i print from SAP application an extra blank page is created. Please share solution if anyone have come across similar/same issue.
Thank you,
Narendra.

Hi All,
Thanks for your support and patience. The issue has been resolved. Please find the Solution below:
The TCP/IP printer’s network settings by typing in the printer’s IP address in your windows internet explorer.
When connecting to the printer’s IP address: on internet explorer, you able to see the printer’s configuration settings. By clicking on the configuration link on the left menu and selecting the “Networking” Tab, at the bottom of the screen there is an option for ‘LPD Banner Page.’ The current setting for this option is ‘enable.’ the LPD option is set to ‘enable’ by default. Therefore, this option needs to be manually ‘disabled’ after the printer is set up
Thank you,
Narendra.

Similar Messages

HP L7680 printing extra blank pages

I had repeated issues with LHP 7680 printing extra blank pages. Tried the "new driver" fix and that didn't work. Found the fix: Go to Start, Control Panel, Printers and Faxes, RIGHT CLICK the L7680 Printer, click on Properties, click on Advanced tab. "Spool print documents...." is selected. Change the selection to PRINT DIRECTLY TO PRINTER. Tested and resolved the issue when printing Word and Excel docs

Try this...
1. Go to the Printers folder and right click on the printer icon, then select ‘Run as Administrator’, and select ‘Properties’.
2. Click on the ‘Advanced’ tab, and click on the ‘New Driver’ button.
3. When you have to select the printer driver, select the ‘Have Disk’ button and point it to the installation CD or the ‘7zSxxx’ folder and install it from here. Or you can look under the ‘Manufacturers’ list and select ‘Hewlett-Packard’ instead of ‘HP’, and then select the appropriate printer driver.
4. Complete the wizard, then apply the settings by pressing the ‘Apply’ button. Try printing again, and the issue should not reoccur.
Also, are you using Windows Vista?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Print extra blank pages & problem receiving faxes

Hi -- My Photosmart C7280 All-In-One begins most printing jobs by printing out a blank page. Also, if I'm printing multiple pages, many of them will be blank (but the document prints in entirety) It doesn't matter if I'm printing a Word document (which I know has a conflict with HP, and which I also know does not have a blank second page at the end), or an attachment to an e-mail, or information from a web page, or even pritnting an envelope. In fact, I have to let the envelope roll through blank, wait for the error message that there is no paper in the tray, then shoot it through again before I'll receive a printed envelope. Also, if I'm copying multiple pages I'll receive the extra blank pages, but not if I'm copying pages one at a time.
Also, I used to be able to receive a fax automatically. The call would go to my recorded message. As soon as it ended, the incoming fax was recognized and it would print. It doesn't do that any more. I have to manually pick up the receiver of the phone before the machine will begin receiving the fax.
My HP printer is on a network. I can't remember if it still worked or not after we placed it on the network. Also, I recently downloaded IE 8.
This has been frustrating me for months, but have not had the time to seek help till now.

I have the same problem - print a document and a few seconds later a blank page comes out.... Any ideas?

HP Pro L7680 all-in-one printing extra blank pages

No matter what I print the printer adds a blank page before and after each print job. Doesn't matter application amd I don't see it on fax, scans or copies.
Thi shappened after my laptop had to be wiped and reloaded. I reloaded the drivers and has happened ever since.

Try this...
1. Go to the Printers folder and right click on the printer icon, then select ‘Run as Administrator’, and select ‘Properties’.
2. Click on the ‘Advanced’ tab, and click on the ‘New Driver’ button.
3. When you have to select the printer driver, select the ‘Have Disk’ button and point it to the installation CD or the ‘7zSxxx’ folder and install it from here. Or you can look under the ‘Manufacturers’ list and select ‘Hewlett-Packard’ instead of ‘HP’, and then select the appropriate printer driver.
4. Complete the wizard, then apply the settings by pressing the ‘Apply’ button. Try printing again, and the issue should not reoccur.
Also, are you using Windows Vista?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Printing an extra blank page at last in the report with result!

Dear Team,
I have one report ZFI_KKKKK i.e working fine with the result.
The problem is that this report prints an extra blank page in the end of the report.
It should not print the extra empty page. Itu2019s a bit annoying for some users.
If you execute and print this and you will get a page with results and a blank page with just the title.
Any input from your side to rectify the issue?
Thanks and Regards,
Sarkar

Hi,
change the line size and check.
vijay Gurav

How can I stop Address Book (Lion) from printing an extra blank page when I print an envelope

Whenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?

HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
Solution: Select a #9 envelop. This prints about the same size and does not have an extra envelop.
How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
Over the years I have called HP and they couldn't solve the problem.
I have told Apple today when I figures out the workaround.

Extra Blank Page Printing When Duplex Printing on HP 8610

Whenever I do duplex printing, before the 1st page of the document prints, a blank page comes out of the printer. The document itself prints okay in 2 sided mode.

Welcome to the HP Community , I understand when you duplex print from your Windows Vista system, your Officejet 8610, a black page prints before the document actually prints out. I hope to help you with my suggestions. To get started, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please let me know the outcome! Try printing again now to see what happens. Also, test print from more than one program, which will tell us if the issue is within one program on your PC, or with the printer driver itself. I hope to hear from you!

Smartforms - Extra Blank Page in DUPLEX mode

Hello Friends,
I am printing my smartforms in DUPLEX page mode. Its printing fine but i am getting an extra blank page.
Searched the forum but no luck.
I have defined 3 pages Page1, PAGE_INST,Page2. I need to print instructions(say) on back of each page.
I had set page1 to duplex mode 'D' and next page to blank.
My pages flow is in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows and have a command to print PAGE_INST.
Page_INST Does not has main window.
Page1 : next Page 2.
Page INST : Next page is Page 2.
Page2 : is a continuation of page 1 next window is blank(or page 2)
Its printing fine in Duplex but always there is a blank sheet in the print out at last page.
Can someone help me how to avoid the last blank page.
Thanks

HI Hari,
How to avoid a blank page at end of the page?
Regards,
Sravanthi

Implementing multiple page size requirement - extra blank page at the end

My XMLP report requirement is as follows.
- The report is printing a bunch of lines.
- Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
- The first page needs to be printed on Legal size paper
- Subsequent pages (IF NEEDED) need to be printed on Letter size paper
So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
Here is a sample XML data:
<REPORT>
<LIST_G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>1</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>2</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>3</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
</LIST_G_PAGE_NUMBER>
</REPORT>
For this, I created 2-pages RTF template and using the Word Page Setup feature:
1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
The first page has the following XMLP tag:
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER=1?><?call:body?><?end if?>
<?end for-each?>
<?template:body?>
for-each loop that prints lines in a tabular format
<?end template?>
2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
<?end for-each?>
It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
Thank you!

Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

Getting One Extra Blank Page

Hi All,
I am printing labels thru smartforms. For eg. my internal tablei have 3 line items
so these 3 should be printed in 3 different labels. And I am getting the correct output also. But after that 3 label prints one extra blank page is coming.
What could be the reason.
I have used loop for the data.
loop - for showing continuous data.
program line - used to calculate number of entries i have in the table. I have already counted the total entry in my print program
and passing it thru Form interface-import parameters.
command line - for explicit page break in the table after each line item.
Kindly guide what could be the reason for this blank page.
Thanks,
Pradeep

If you run a page break after each line, it is normal that a blank page is published at the end. Do not ececute page break on the last record
Regards,
Raymond

SSRS 2008 Report with two tablix have extra blank pages

I am working on a report in SSRS 2008 that has two tables (or tablices?). My report is set to a width of 11 and height of 8.5, left and right margins of 0.25, top and bottom margins of 0.5. Paper size is Letter, Orientation is landscape.
With margins accounted for, I basically have 10.5 of workspace for the Body. The first tablix's width is way under 10.5 but the second tablix has lots of columns and would have to span two pages so the Body goes past 10.5 but I
kept it under 22 (twice one page). I put a PageBreak after the first tablix. When I run the report and do a Print Layout, the first tablix prints with a blank page after every printed page of that table. The second tablix prints just fine, no extra
blank pages in between. So I suspect that it is the "empty space" to the right of the first tablix, which is caused by the second tablix's width, that is the problem.
However when I tried to switch the tables in my report and have the wider tablix print first and the narrower tablix print after it, I did not get any extra blank pages on both; the reports prints just fine.
Unfortunately, I cannot have the wider tablix print first with the report I need. I would like to know if this is a bug in SSRS 2008? It appears that there is something with the order report objects are printed and their size. Has anyone figured this out
yet? Thanks.

I found
this post on the MSDN forum that offers the following solutions that worked for a few people responding to that thread. You might want to try one of these:
"I found the problem cause. In Reporting Services, report body width must be <= (report width - report margins width).I reduced the margins to zero width, and the pagination problem disappeared!"
"I have solved my problem. With SSRS you must be very careful with the way you place objects
Growing objects will push those on their right, even if they are not on the same line /!\
Consider a textbox 2 inches large centered, and a growing matrix beneath it. on the left, 1 inch large. At run time the matrix will grow and the title will be pushed aside. And this may cause blank pages.
A workaround is to create 1 rectangle per object. The rectangle should occupy all the body space available while objects occupy only a part of their embedding rectangle."
Carla
Carla Sabotta

HP 4620 Scanning too many pages; Extra blank pages ???

My 4620 Fax/Scan/Print/Copy will not scan correctly. I put one page to scan to my computer adn it scans 20 + pages. No matter how many pages I put in it always scans extra blank pages. I have reset the machine, I have realligned the machine and nothing works. Doe anyone know how I can fix this problem??
Thank you,
Mel

Hello Mel7777,
Welcome to the HP Forums.
I see that you are having an issue with the printer scanning multiple blank pages.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please be sure to power cycle the unit with the ON/OFF button after you have connected the power cable to the wall outlet. This will do a semi power reset on the unit.
So I can better assist you, please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Extra blank page with each printout

Hi all
Each time I print a document from Adobe Professional, I get an extra blank page, whatever the size of the document. Not a big deal but annoying especially when striving to avoid paper waste !!! I am running Adobe Pro on a MacBook Pro and my printer is an HP OfficeJet 8500.
Any idea how to stop this extra page ?
Cheers
Ch.

What version of CR? Please be precise; Go to Help About and quote the version reported there
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to avoid printing a blank page when there is 'no data' in the report.

how to avoid printing a blank page when there is 'no data' in the report.

try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if

BI Publisher - if page number is not divisible by 2 then print a blank page

Hi,
I have an BI Publisher rtf word template. I want to be able to print a blank page if the page number is not divisible by 2. Does any body know how this can be done? Your input is greatly appreciated and thank you so much in advance.
MT
Edited by: user11177994 on Mar 29, 2010 8:19 AM

Hi Dominic,
Thank you for the link. The problem that I have is when the job specification last page prints on the front of the page, and the next job specification prints on the back of that page. There is no way I can control what page it is going to print on. This is depending on how much description the user puts in. Any suggestion is greatly appreciated.
I do have another issue too, and you maybe able to help me with this. Below is a list of form fields on my template. When the job specification is printed on more than one page, I could not get the fk_job_title to print on the continuous pages. Is there a way I can code this fk_job_title to print on all of it's continuos page? I have tried many different ways but could not get it to print. I also posted this in the forum, but didn't get any respond.
** form fields **
CLASS TITLE: F fk_job_title PAY GRADE: p_grade
JOB CODE: job_code SALARY RANGE: s1 - s2
LOCATION OF WORK: work_location
GENERAL DESCRIPTION: general_descr
ESSENTIAL WORK TASKS: work_task
KNOWLEDGE, SKILLS, AND ABILITIES: knowledge_skill
EDUCATIONAL AND EXPERIENCE: education_exp
SUBSTITUTIONS: sub
CERTIFICATIONS/LICENSES: certification_license
OTHER JOB ASPECTS: job_aspect E
PB
Thank you so much,
MT

SAP is printing extra blank page

Similar Messages

Maybe you are looking for