SAP -ISU-DEVICE MANAGEMENT-ABAP LINK METER

Hi,
Basically i am a ABAP Consultant,recently i have been assinged to IS-Utilities Project,i wanted to know the what are the things i have to know/study for the understanding of the ISU and ABAP and where i will get the material for IS-Utilities specially in the ABAP and Fuctional and ISU integration Prospective
you will be greatfull for giving suggetion/link
Thanks

Hi jairaj,
Pls go through the link,
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dc54beafc11d18a030000e829fbbd/frameset.htm
http://www.geocities.com/rmtiwari/Resources/Training/SAP_ISU/SAP_IS-U_Overview.html
http://www.sap.com/usa/industries/utilities/index.epx
Regards,
Hareesha k
Reward for helpfull answer

Similar Messages

SAP -ISU-DEVICE MANAGEMENT-MM LINK MATERIAL

Hi,
Basically i am a MM Consultant,recently i have been assinged to IS-Utilities Project,i wanted to know the what are the things i have to know/study for the understanding of the ISU and MM and where i will get the material for IS-Utilities specially in the MM and ISU integration Prospective
you will be greatfull for giving suggetion/link
Thanks
jairaj mahaling

Hi jairaj,
Pls go through the link,
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dc54beafc11d18a030000e829fbbd/frameset.htm
http://www.geocities.com/rmtiwari/Resources/Training/SAP_ISU/SAP_IS-U_Overview.html
http://www.sap.com/usa/industries/utilities/index.epx
Regards,
Hareesha k
Reward for helpfull answer

Sap isu device management

Hello experts,
Kindly expain how to create the master data in sap isu device management. as i am using oracle base software and now i want convert it to SAP ISU DEVICE MANAGEMENT, so firstly i have to create master data then interface program.
am i right? kindly clear it and tell me about interface program also. if you have useful data about this kindly provide.
Regards.
Ankur

Hi jairaj,
Pls go through the link,
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dc54beafc11d18a030000e829fbbd/frameset.htm
http://www.geocities.com/rmtiwari/Resources/Training/SAP_ISU/SAP_IS-U_Overview.html
http://www.sap.com/usa/industries/utilities/index.epx
Regards,
Hareesha k
Reward for helpfull answer

ISU Device Managment

Hi All,
I am very new to ISU and just started getting trained on Device managment ,I know the SAP MM & DMS very well, Any links or any document related to ISU device managment.
Regards,
Ranjan aMit

Kindly look into this link. You will get more information related to Device management.
http://help.sap.com/saphelp_utilities472/helpdata/en/9f/03693582f4db60e10000009b38f889/frameset.htm
Allot points if it helps
Regards,
Shiva Kumar

SAP ISU - Work Management

Hi Experts, Could you please share standard SAP documents/materials for 'SAP ISU - Work Management'.
Thanks in advance.
Regards,
Shailesh

hi,
please look into this link
http://help.sap.com/saphelp_utilities472/helpdata/en/6a/1a6c35a018d041e10000009b38f839/frameset.htm
hope this helps.
cheers,
Rakesh..

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

ISU-device management

Hi guys,
In transaction Iq09 , when am giving input as the Functional location ,the equipment installed to that functional loaction is not displayed.this problem is coming only in case of few exceptions.

Hello,
Here is a suggestion:
Create report z_iloa_owner from SAP note 612709 in your system.
After creation you can run this report in test or update mode.
(In test mode the affected records in table ILOA are displayed and no updates are executed.)
I hope this helps...
Regards
Olivia

SAP ISU Career Ladder

Hi Seniors/ Experts
I am currently working as a resource in SAP ISU in a Production Support project for a Utility company in UK in Device Management Module for Capgemini.
Let me start from the beggining.
I Got tagged into SAP ISU Project, trained on all modules of ISU ( very tiring training 9.30am to 6pm ).
Initially ,I just got a small idea of what SAP ISU is ..then I was tagged to the support project and start working in Device Management Team from Nov 2012.
What we do in the Project ? We receive Tickets ( Incidents ) in a tool called Service-now where we have to analyse the issue in SAP system and resolve it according to technical and functional skills which one have .Initially ,I was very much confused of Tcodes and how to resolve these tickets . i worked with my senior.He guided me a lot in them. Mostly we face Standard ISU Errors Data issues while trying to Bill the Account ,So we analyse them and solve them. Sometimes we also get device timeslice errors. Thus, we mostly use Standard Fucntion modules to enter reads and bill the account .So I have got a zist on Satndard Tables & Fm's related to SAP ISU Dm module.Also, I have little idea on move-in move-out tables.
We have been resolving the same issues since 1.5 yrs and there is nothing much to learn in
Its just 1.5 yrs I am in this project .So , my Total Exp = 2.5 yrs.
My Question :
Please explain me how shall I grow in SAP ISU market as Device Managment Consultant.
Explain me All :
How shall I grow as a technical consultant in SAP ISU , as a Fucntional consultant or as a Techno-fucntional ?
I have heard that SAP ISU is a Techno-fucntional module, Is it true ? does every SAP ISU resource must know technical as well as functional knowledge ?
If not , How to grow career only as SAP ISU Functional ?
According to my analysis , I am both technical and fucntional ...OR none of them Feels as if I know nothing.Please guide me on what to pursue in SAP ISU Device maangement as I can see my seniors are both technical and functional, I always get scarred of them When I compare myself to them
In Short , Please explain what is the Career Ladder in SAP ISU Device management .
Enough !! I have written so much

Hi Chiranjib ,
You are right .SAP IS-U module is a techno-functional module and it is required to everybody to learn both technical as well as functional .In support project ,You can learn the full functionality and can check end to end solution for that process .Try to know all the T code and tables for IS-U module .ISU master data is very important .UK industry is very complex compare to other country.
Thanks ,
Pankaj

Scrapping Meter(SAP-ISU) post Removal/Replacement

Kindly refer to the SAP-ISU implementation scenario below:
A meter(serial number) is issued from stock against a work order(Mov type 261) ,which get physically installed at a site.The issue is done through the transaction MIGO.
Now after a meter removal/replacement the old meter needs to go back into a "scrap" storage location,as these will be never re-used again.
Would appreciate,if you can put forth your ideas on how to do this,in terms of movement type to be used,whether it can be done from the same transaction(viz Transaction for removal/replacement).
Thanks in advance

Just to understand your suggestion better,you are asking me to do a Goods Receipt of the serialised material, and then transfer post it into a designated scrap storage location,please confirm.
If I do a GR using MIGO, what do I do the GR against ? Also how do I enter the required serial number/material combination.
Thanks again.

Unknown Device in Device Manager for Lenovo G780 laptop, Windows 7

Hails all. I am trying to figure out what the Unknown Device is under Other Devices in my Device Manager. I recently got rid of Windows 8 and put Windows 7 64-bit on my Lenovo G780 laptop. I installed almost everything from the Lenovo site --- all of the drivers and such, software, etc. I cannot figure out what this device may be. The only external device connected to the laptop is a Kensington usb mouse. Any ideas?
I did run the PCI test program and the Motherboard test program that Lenovo provides and it didn't find any errors. Windows Update hasn't found update/driver/software for the Unknown Device. The Lenovo Solutions software only tells me to open Device Manager.
Link to picture
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums
Solved!
Go to Solution.

Welcome to the forum!
Since Windows Update didn't pick up any missing drivers, I'm guessing you are missing a driver for a device that would be propriatary to Lenovo. During the installation of Windows 7, did you install the One Key Recovery software ? If not, the One Key Recovery button maybe triggering that exclamation mark in Device Manager since there is no driver to tell Windows what to do with that button.
If that wasn't the problem you can try running Unknown Device Indentifier to see if that utility can indentify the unknown device. The free program can be found at the link below........
http://www.zhangduo.com/udi.html
OR
Use the Direct Download link at...........
http://download.cnet.com/Unknown-Device-Identifier/3000-2086_4-42618.html
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Processes of device management of SAP ISU

Can any one tell me all the processes and sub processes of device management of SAP ISU. Thanks in advance for your help.
Moderator Note - thread locked due to rules violation - no generic postings
Edited by: William Eastman on Mar 12, 2010 2:16 PM

Hi,
Organizational Management is useful in a business transaction like activity, sales order etc. You can determine the org. structure or Business Partners (like employee responsible) for a business transaction.
Organization Model can be used for different functions like Sales, Service, Marketing (You can check this by clicking on "Function" tab in the Org Model screen). If you click Sales function and go to Attributes tab you will see particular set of attributes, while if you click service function you will see different set of attributes and also if you click marketing function you will see another different set of attributes. These attributes are helpful in determination of BPs based on these attributes through Organizational data determination.
Refer the Document CR100 and refer teh below help Doc also.
http://help.sap.com/saphelp_crm60/helpdata/en/bb/bdb3d9575911d189240000e8323d3a/frameset.htm

Oracle Meter Data Management Integration with SAP ISU

Hello Everyone,
I am aware of the fact that Oracle has released a Media pack for the subject integration as discussed here and that media pack works only for SAP ERP 6.0 EHP 5 with ISU_AMI_2.
We have got OU MDM Release 2.1 Media Pack v4 and SAP ERP 6.0 EHP 4 with ISU_AMI_1 and hence Adapter in MDM won't help to achieve integration with SAP as our SAP EHP is lower than what is required for the MDM adapter. We have got SAP PI which would help the SAP End in the integration.
What are the possible work-around(s) to achieve the integration between Oracle MDM and SAP ISU without using the Media Pack/Adapter?
How does MDM exposes its services (inbound/outbound) to be consumed/triggered by External systems (i.e. SAP ISU)?
List of Services (inbound/outbound) exposed by Oracle MDM for integration?
Your time and help is much appreciated.
Regards,
Adil Khalil

Did you find the document Oracle Utilities Customer Care and Billing - Meter Data Management Integration Implementation Guide?
I searched on eDelivery and Oracle Support, but cannot find the document.

Remove EDM Profile from Interval Meter of an installation-Device Management

My dear friends, I need sincere help from you .
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Installation lock error while uploading meter readings in sap isu

Hi,
Following is the process followed:-
Execute EL35 transaction to generate MRO Print in SAP ISU.
at back end a process is triggered where Meter readings are fetched from a data server and uploaded in the sap isu using BAPI BAPI_MTRREADDOC_UPLOAD as a background process after a propogation delay of a minute after executing EL35.
If the el35 requesting is closed the meter readings get uploaded.
However if the transaction is kept open then we get an error that installation is locked.
Please advice if there is a way to dequeue this lock while trigerring the EL35 transaction in first place..
Regards,
Sarvesh
9920722958

Hi,
Message - 'Format of MR 17737 not valid (MR document number 105677 ) signifies that number of pre-decimal places and number of post decimal places do not match with your register group configuration.
Since, you are suggesting that your logic works in most of the cases, I think when meter overflow happens and while you are converting it to actual read - this reading do not match with pre-decimal and post decimal places.
You need to double click on register group for a device, where you are facing this issue and then compare your calculated read in your code.
Hope this helps.
Regards,
Avinash

Billing view in SAP ISU CRM - Meter reading not visible

Hi All,
We are working on SAP ISU CRM implementation
In the billing view factsheet ,bill details are visible but meter reading and device is not visible.As one bill document number may have multiple line items with meter readings in more than one line item
Can someone guide me how to pick specific line item and viewed it in Billing details.
Regards
Ankit

Hi,
Your requirement is not clear.
As per my understanding,u mentioned as multiple meter reading and multiple line items.
This is due to Price may be block price, check the price key.
Check the rate steps line item type and also schema steps
regards,
Nags

SAP -ISU-DEVICE MANAGEMENT-ABAP LINK METER

Similar Messages

Maybe you are looking for