SAP ISU system SXMB_MONI Transaction taking is taking long time

HI There,
We are having the SAP IS-U test system which is ECC 6.0 EHP 5. This system recently refreshed with production data.
From that time on-words , SXMB_MONI is taking too much to open the any small search criteria and it is giving a timeout at that end.
Could you please suggest me how to resolve this issue.
Thanks,
Pavan.

Hi Gagan,
I have already checked this thread before open this message.
As per Sudheer Thiwari thread,
Please check in tcode SM50, if there are any archiving, deletion jobs are scheduled or check in SXMB_ADMIN-->Persistence layer analysis if the level is too high, schedule the switch delete procedure.Also check in ST06 what is the Utilization %.
I checked the persistence layer
Switch Procedure (for Persistence Tables) Deactivated
Number of Table Entries                                                                117,057,488
Expected Number of Table Entries                                                       830,000
Current Fill Level in %                                                                14,103
Threshold Value for Fill Level for Executing a Switch Run in %                         90
Number of Logically Deleted Table Entries                                              0
Decline of Fill Level in % Following Deletion                                          14,103
Could you please suggest this could be an issue ?
Thanks.
Pavan.

Similar Messages

TDMS Shell - DB Export from source/sender system taking a VERY long time

We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial DB Export from source/sender system is taking a VERY long time.
We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
Our BSIS table is nearly 700 GB in size by itself. That export has been running for nearly a week now, with no end in site.
What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges. In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,

Hello
Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
Answer following questions to help me analyze the situation -
1) What is the current size of export dump
2) Since when is the exports running
3) What is the size of the source DB? Do you have huge amount of custom developments?
4) Did you try to use table splitting?
5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
7) Were the DB statistics update during the shell or were they already updated before starting Shell?
8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers?

FICA -IDOC for posting the billing data from NON-SAP ISU system

Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI system

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

Logical database in SAP-ISU system

Hello,
Does any1 knows the LDB available in SAP ISU system. I am searching for LDB (or table join) which containes tables like FKKVKP, EVER, EANL , EVBS & ADRC.
Regards,
Abhijeet

Hello,
Does any1 knows the LDB available in SAP ISU system. I am searching for LDB (or table join) which containes tables like FKKVKP, EVER, EANL , EVBS & ADRC.
Regards,
Abhijeet

Calculations on new server is taking a very long time

Hello,
We are upgrading from a 9.2 to 9.3 system. The 9.3 system is on completely different servers than the 9.2 system. We have migrated a couple of applications and the calcs on the 9.3 system are taking a very long time. For instance a calc that we ran on the 9.2 system that used to take 1 hour now takes 7. Also, on a different application a calc that used to take 15 minutes now takes an hour. The applications that we put on 9.3 are identical to the application on 9.2 (we used the migration utility). Additionally, I have ensured that the essbase.cfg files have the same cache settings. What else can we do to get the performance on the 9.3 system to be equal to if not better than the 9.2 system?
I appreciate any help.

I would recommend that you run perfmon.exe (if using Windows) to look at the CPU and Disk I/O utilization.
On a well tuned system, you will see a "toggling" of max CPU and max I/O as each keeps the other busy and takes relatively small breaks in activity.
My suspicion is that the I/O is the bottleneck on the new system, maybe it's using an external array that is shared, perhaps? If this is the case, the CPU utilization will be relatively low and the I/O will be relatively high (if you are familiar with the concept of duty cycle, the I/O duty cycle will be well more than 50% if it's the bottleneck, much less than 50% if the CPU is the bottleneck, and about even if they are well balanced).
The other major possibility (aside from weak disk configurations) are that a raid drive is in fault mode and the controller is rebuilding the set. The other possibilities are more like fringe cases compared to these two.

EHP4 ACT_UPG phase taking a really long time

I'm still working on the EHP4 installation and for some reason the ACT_UPG phase in Step 5 - Pre-Processing, is taking a really long time, currently 7 hours and counting. This phase apparently "Activates ABAP Dictionary Customer Objects". I didn't think we had that many (relatively), in our system.
Just wondering how long this phase took for those of you who have gone through implementing EHP4? I'm running SQL 2005 on W2K3 all 64-bit on fairly decent hardware.
Thanks!
Tom

Hi,
Usuall Preprocessing phase takes very long time...
But there are few steps which can increase the performence,...
1) Depends upon how many parallel R3trans processes you have taken during configuration phase...
2) Also, you can increase performence by changing some memory parameter in shadow system...For this run RSMEMORY program in SE38 then it will show you some parameter you can increase the moemory according to your hardware...
3) Also, it will be good if you increase parameter db_cache_size in your database....
Hope it helps
Thanks
Sunny

Demand Planning Job taking a very long time

Hi,
We run our demand planning job once every month. The job is taking very very long time (around 60,000 secss) to complete. When I check the job log system passes some steps and just waits in some specific steps with the message
Step 059 started (program /SAPAPO/TS_BATCH_RUN, variant ZADAU_OFF1, user ID APP-BATCH)
SQL: 07.01.2008 09:54:28 APP-BATCH
TRUNCATE TABLE "/BI0/0600000002"
SQL-END: 07.01.2008 09:54:28 00:00:00
SQL: 07.01.2008 09:54:30 APP-BATCH
TRUNCATE TABLE "/BI0/0600000002"
SQL-END: 07.01.2008 09:54:30 00:00:00
Itwaits for aorung 2 hours with thie same repeated message before it goes to the next step. Not sure what is the issue. Our fiunctional guys have tried changing the macros, etc to optimize performance. But still same issue. Any quick help would be greatly appreciated.
Thanks in advance.
Regards,
PK

Hi SB,
No we are not managing infocube keyfigures in the planning book. Appreciate your time.
Regards,

Discoverer report is taking a very long time

Hi All,
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
Regards
Kumar

Please post the details of the application release, database version and OS along with the discoverer version.
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are taking a very long time to send.

Hello, I'm currently having a big problem with messages taking a very long time to actually send. The spinning wheel will stay there for hours. It only happens in one or two skype groups at a time where I can send messages normally in other groups. Does anyone have any idea how I can fix this?

I have been having this problem for the last 4 releases. I have had some take up to 8 hours to send before. I can usually fix it by signing out then restarting skype. Just restarting skype doesn't work, nor does just signing in again.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank you

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD.

No, you cannot backup via direct usb connection..
But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

How to tune the query..."sum" operation is taking too much long time...

how to reduce the execution time for the below query..."sum" operation is taking too much long time....
SELECT
B.DP_AVPS_STATUS,
SUM(DP_AD_CURR_BAL*D.ISIN_CLOSE_PRICE) Qty,
B.DP_NET_WORTH,
B.CMN_DP_FLAG,
B.RESTRAIN_TYPE ,
B.LETT_GENR_DATE,
E.MAX_NET_WORTH,
E.MIN_NET_WORTH
FROM DPMADV0 A, PABRNCHDTLP0 B, PABANKCCYP0 D,PADPNETWORTHDTLP0 E,
(SELECT CID_NUMB FROM CFCUSTMASTD0
WHERE SUB_TYPE NOT IN (1,2,5,6,7,28,29,30,31,40,41,48,49,50,57,83)) C
WHERE A.DP_AD_BR_NBR = B.BRNCH_NUMB
AND A.DP_AD_CCY_CDE = D.CCY_ALPHA_CODE
AND A.DP_AD_ACCT_NBR = C.CID_NUMB
AND E.DP_ACCOUNT_TYPE = B.DP_ACCOUNT_TYPE
AND SUBSTR(B.BRNCH_NUMB,1,3) like SUBSTR(:hvBrnchNumb,1,3)
AND ((B.DP_TYPE IN (2) AND B.DP_ACCOUNT_TYPE IN (10, 11)) or
(B.DP_TYPE IN (3) and B.DP_ACCOUNT_TYPE=11 ) )
AND B.DEL_FLAG = 'N'
AND B.DP_STATUS = 'A'
AND D.ISIN_STATUS = 'A'
GROUP BY B.DP_NET_WORTH,B.RESTRAIN_TYPE,B.DP_AVPS_STATUS,E.MAX_NET_WORTH,
E.MIN_NET_WORTH,B.CMN_DP_FLAG,B.LETT_GENR_DATE;

Hi,
please produce a plan with rowsource statistics (if not sure how, follow instructions in http://savvinov.com/2012/09/24/a-sqlplus-script-for-diagnosing-poor-sql-plans/) and post it using tags to preserve formatting.
Best regards,
Nikolay
P.S. I also suggest that you work on your open threads:
Handle:      946903
Status Level:      Newbie
Registered:      Jul 16, 2012
Total Posts:      11
Total Questions:      5 (5 unresolved)

Inventory aged reports are taking a very long time to run

We are using Standard delievered extractors for Inventory. We have build an Aged report and it is taking a very long time to run as more an more data is added. We put the inventory in buckets 0-30, 31-60, .... >365 days. We are aging based on a batch date the user enters. the problem is it has to go through every record to recalculate because they are non cumulative.
any ideas/suggestions on how to make this more efficient? New design?

Hi MM,
We can use snapshot of monthly data from Query and store it in DSO at month level.
We had used APD on Query and then Stored them in DSO1(WO)->DSO2(STD)->Cube->report based on Snap Shot.
From the New Query , calculate the Age.
Rgds
SVU

Notebook Taking a very long time to power off

Hi All,
My notebook (HP ENVY 17-j005tx Notebook) when shutting down only takes a couple of seconds, however it can take upto 5 minutes to power off...
At first i thought some service or program was taking a long time to shutdown, I installed Windows 8.1 SDK Performance Toolkit to try and identify a culprit; ran the command "xbootmgr -trace shutdown -traceFlags BASE+DIAG+LATENCY -noPrepReboot" and succeffully generated trace file.
I noticed the notbook had rebooted in just a few seconds..
Anyhow I proceeded to analyse the trace file using the wpa.exe program anf could not find any program or service taking much time to shutdown!!!
SO I understand now the Windows OS is shutting down nicely though the Notebook is taking a very long time to power off.
Anyone have any suggestions? I do have NVIDIA Driver 337.88 installed and did find another thread here where they suspected this driver version has not been tested by HP and after they applied it their notebook shutdown slower than usual - is this somehting maybe to look at...
I'm currently downoading sp63414.exe NVIDIA driver for my notebook - should I uninstall my current driver and apply HP's?
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer
This question was solved.
View Solution.

Thanks visruth,..
What I tried is run "msconfig" and boot into "safe mode", rebooted then shutdown, shutdown was back to normal again.
So then reran "msconfig" disabled all non-Microsoft Services, shutdown and again all powered off as normal (quickly after shutdown).
So rebooted and re-enabled all services again using "msconfig". THen disabled the following services, choosing these specifically as I'm not so sure why they should be running and some not know what they are used for...
rebooted and then shutdown and all shutdown and power off was normal...
It seems one of these services is causing the power off to take several minutes....
I suspect the bluetooth services, or the GSService, or IconMan_R, or possibly the Netgear Genie...
Funny enough I did uninstall netgear genie a few weeks ago and see for some unknown reason the Service is still there???? Hmm...
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

SAP ISU system SXMB_MONI Transaction taking is taking long time

Similar Messages

Maybe you are looking for