SAP ITS URL not throwing correct HTML code

Gurus,
I am working on publishing warehouse management transaction LM05 on web browser using ITS. On our ECC6.0 system, I created required HTML templates, ITS service and published them. They are working fine and the browser is throwing up HTML pages and code as expected.
Now, on our other system which has Enhancement pack 2, I followed the same procedure, but getting different results. The initial page though is being displayed, is throwing up HTML code which is very different from what is expected. If I navigate to second screen, it is throwing up expected HTML code. Is this is a Enhancement pack issue? If not, what might be the problem and how do I get around this?
Will greatly appreciate help in this issue and points will be awarded too.
Thanks,
Surya.

HI Surya,
Is the issue regarding the look and feel of your custom service?
If you review the view source of each page - what are the differences.
Check the parameters used for both service in SICF and compare.
Regards,
Oisin

Similar Messages

Does Expression Web produce correct html code?

I have been using Expression Web since version 1 and never has a problem with any server. On the present server by HostGator that upload to since years, suddenly all non-standard characters turned into squares. This is across the whole website since 2000.
The tech support tells me it is because Expression Web does not convert to html standards. The problem occurred while their tech support work on an upload problem.

Yes. Expression Web produces correct code. Expression Web is just a fancy text editor, like Dreamweaver.
What nonstandard characters do you mean--specifically? Are they different fonts? Different languages? Math symbols? You need to be much more specific. And we really need to see that problem to try to help.
Post a link to the page and tell us what exactly is showing up wrong.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

Why do website forums keep telling me that my messages contain HTML, when they do not contain any HTML code at all?

I am hoping someone more intelligent than me, can help me out here, as I've got a really infuriating problem.
I tend to visit a lot of online forums, especially in recent days those at Sky (http://helpforum.sky.com/) and Vodafone (http://forum.vodafone.co.uk/)
Whenever I log in, and try and post a message, I keep getting a very annoying error message that says:
"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
The problem is, I never use ANY HTML code, as I don't know what it is. I do use spaces, capital letters, standard punctuation marks, and carriage returns/paragraph breaks. This problem doesn't manifest itself on Internet Explorer, nor Opera, nor Chrome.
So what's going on please?!

Please try the steps at [[Websites say that Firefox is outdated or incompatible even though it's the latest version]] before trying anything else, then update Firefox [[Update Firefox to the latest version]]

Start site is not uploaded correctly. html is missing. What can I do?

Hallo,
I am searching for a new web host and created my site with Iweb.
Unfortunately I cannot upload it correctly to the testing site. Pictures and the blog are all right. But the start site with its links is missing.
Apparently it is an Iweb fault. What can I do?
thanks for your help. My testing site is running out tomorrow:

The method for uploading files using the iWeb FTP is shown here...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
This uploads the external index.html and a folder containing the rest of the website files which has the same name as the site name in iWeb (the one at the top of the left column in the iWeb window). The URL to any page of your site is...
http://www.domain-name/website-name/page-name.html
Entering domain-name.com into the browser should take you to the Home page.
Uploading files using this method, its not possible for files to be mislaid or corrupted so the problem would appear to be on the server.
The other method of publishing requires that you publish to a local folder and upload the files inside the main folder and this is shown here...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
Using this method its possible to miss out some files which would cause the site to not load properly.
Uploading via Ftp is discussed here...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

AP Approval Notification - URL not displayed correctly

Hi,
we are working in R12 on the AP Invoice Notification for approval. We are displaying all invoice details and the customer had an URL displayed correctly in the notification in R11. The URL is pointing to an Scan of the actual Invoice.
In R12 we are not able to te get the URL correctly displayed on the notification. Since the URL is pointing to an picture (in TIF format), the notification tries to embed the picture. We would like to display the URL.
Any suggestions how to get this done?
Thx Roel.

We found the solution.
We added the string 'LNK:' right before the URL and this worked.

URLs not working correctly

I'm using a Mac Mini box as a server -- not really OS X Server, but I hope someone on this board can answer my question, so sorry if OT. My university has nicely set up the domain for me, but my sub-directories refuse to work correctly. When going to:
http://royzemi.rikkyo.ac.jp/magazine (no final back-slash)
the server redirects to my sharing set up: http://www.fangorn.local/magazine/
With a backslash, it works ok: http://royzemi.rikkyo.ac.jp/magazine/
A lot of times, webapps such as Wordpress delete the final backslash by default and so many things don't work. Can anyone tell me how I've got my settings wrong on this OR how I can fix it? If it's a DNS problem then I need to get our IT people to look at it, but a simple explanation would allow me to tell them what's needed.
Thanks

Hi Joe, The Link you are using is incorrect "http://mydomain/sites/mysite/searchcenter/Pages/peopleresults.aspx?k=retail" If your Search Center is in the root please try "http://mydomain/searchcenter/Pages/peopleresults.aspx?k=retail" I hope all of your
MySites do not have Search Centers? -Ivan
-Ivan

LrTasks.execute not getting correct return code

Hi all,
I'm writing an Export Filter Provider that, in the postProcessRenderedPhotos function, calls an external Python script like this:
            exitStatus = LrTasks.execute(command)
            log:debug("Task returned, exit status is " .. exitStatus)
            if exitStatus ~= 0 then
At the end of my Python script, I use
sys.exit(0)
and have verified that running of the script indeed returns 0 by running it in the shell and then checking the return code
echo $?
returns 0
Whenever I run this script from my Export Plugin, I always get an exitStatus of 256. Any ideas on what I'm doing wrong? Thanks!

I would first assure that in the Lightroom case as well, the script is executing up to the sys.exit statement as well - I suspect it is not (but don't really know...).
I have called python scripts from plugins both successfully and unsuccessfully, although I can't be certain I've checked the actual return code from the sys.exit command.
Consider trying an ultra-short script which writes to a file and exists with a code - make sure you can read the file in your plugin before assessing the return code.
If still a problem, report as bug on Adobe feedback site of course:
http://feedback.photoshop.com/photoshop_family/topics/new
Rob

I am the web master for myschool. We use sharpschool and when I go into edit our web pages all is see is the html code. I would like to have the sharpschool user friendly "word" edit come up. This does not happen with IE.

html code is all I see when editing the school website. As the web master I can write code but prefer the edit friendly version as it is quicker. IE does not show the html code.

Could you help me by specifying how you converted LDAP schema files to LDIF files? I am trying to add a custom schema file on an Open Directory Master running Leopard and have been unable to get Open Directory to pick up the schema file.

Tests the connection to an SAP ITS server

Hi friends,
When iam trying to test the connections in portal the following errors are seen.Please help me to solve the problem if it is in the abap stack or java stack
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
5. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
6. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
7. The Web AS ping service http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/bsp/sap was not obtained successfully; this might be due to a closed port on the Firewall.
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Pings the server to see if it is alive.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
6. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
7. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/gui/sap/its was not obtained successfully; this might be due to a closed port on the Firewall.
thanks

Hi Murthy,
From the Result message which you gave, it seems that you are using the incorrect Hostname/Host path.
Try giving portal server name, generally the system name would be the portal server name.
The port which you are using is 8000, try 80 instead.
Please find the below URL for more details about these parameters.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/2f86691ca96d7be10000000a114a6b/frameset.htm
Thanks,
Ansar

It is possible to insert a html code in iWeb?? help please!!

Hi there, and thanks for helping me!
I have a question. I am new to iWeb, and I am making my first website with Adobe Dreamweaver CS5. I have the HTML, CSS code ready to be uploaded to the web. So I wonder if it is possible to insert my HTML and CSS code in iWeb so I can publish it? I mean, my code in Dreamweaver is ready to be publish, so I want to put the code in iWeb and then publish it with all HTML, CSS and Javascript code. Thanks!

You might be able to reuse some of your html in iWeb with the HTML-snippet:
Whenever I need to do something tricky in iWeb I insert a HTML-snippet from the drop down insert menu -> widgets (or the Media Browser Widgets palette), adjust its size and paste the HTML code into the snippet.
You will not be able to recreate a complete page this way, but you might be able to save some preformatted parts of your page, like elaborate tables and groups of pictures.

How to see html code in a php file using CS5.5 without using testing server?

In CS5.5 when I open a page with php extention, DW does not show any html code in design view without me having to set up a testing server. In DW 8 it would open the same files and show me the html in design view. I have no need to test php code, I just need to alter the html. Is there a setting I can change to enable this in CS5.5? Thanks.

Below is the code. I discovered that if I create a new php document not from
a template, then I can see the html elements in design view. If I create a
new page from a template and save it as html, design view still works, but
if I save a new page from template and save it as php, I only see symbols
for php and nothing else in design view.
Thanks for your help on this.
</div>
</div>
SSL
COT("images/cot.gif", "SC2", "none");
</html

Copy HTML Code into DW?

In CS6 I create a simple rectangle and increase the roundness of the rectangle. I then select the shape and choose edit > copy HTML code and I open Dreamweaver CS6 and paste the code into the code window. I thought it was supposed to write code to replicate the shape I created in FW, though instead it is just referencing a graphic of the shape I made in FW that was exported. What did I do wrong?
Thanks.

Use the CSS Properties panel, not Edit > Copy HTML Code.
Create the rectangle
Make sure it's selected
Open the CSS propreties panel
Click the Copy All button
Go to Dreamweaver
Create a Div and apply a class to the div
Create a CSS class and within the rule, press Ctrl or Command + V to paste the CSS properties from Fireworks.
Refresh the page (and switch to Live View) and you should see the rectangle, with all the supported visual properties, displayed using CSS.
HTH

I have a problem with Firefox, as webmaster I made my websites under IE but now my websites look not OK in Firefox, pictures dont show, menus not working, etc..must I put something in my HTML code so people see my website correct?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/783107''
My website is not working correctly, pictures, menus etc..
As webmaster I made my website, in IE everything works correctly but with Firefox not.
Must I put something in my HTML-code so everybody who use Firefox see my website correctly?
Thanks.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Characters codes are not showing correctly in my wesbite. I use other browser it works but her ein mozilla its not. Please help

This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg

Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category

HTML Snippet customized paypal buttons not showing correctly when published

Hi, My customized paypal buttons that i but on my iweb site using html snippets are not displaying correctly. They work in Opera but not in firefox or safari. Please take a look and tell me what you think might be wrong. (all the links are working it's just not showing the graphics correctly (apart from in Opera)
http://www.alisonbrent.com/ShopTableLamps.html
Also I've just noticed that when i return to my iweb application (after closing in down) the Html snippets aren't there anymore just an outline, just like they appear in safari?
Many thanks,
Ali
P.S

Bonjour
You inserted an image inside the ShopTable_Lampsfiles folder but it's is deleted every time you publish your page
1) Create an new folder named Paypal in your root folder:
FTP: With a FTP software (like Cyberduck) create a new folder in your server root folder
MobileMe: just make an new folder inside the Folder Sites (iDisk > Web > Sites)
Name this Folder "paypal"
2) insert your image "addtocartbutton.png" inside this paypal folder
Get the new URL of your image , something like
http://www.alisonbrent.com/paypal/addtocartbutton.png
3) Paste this URL in your codes, replace
src="http://www.alisonbrent.com/ShopTable_Lampsfiles/addtocartbutton.png"
by
src="http://the/new/URL/of/addtocartbutton.png"

SAP ITS URL not throwing correct HTML code

Similar Messages

Maybe you are looking for