SAP JRA Start Session Dynamic Connection
Hi, I have several JRA connections correctly configured on on SAP Mii. I now need to be able the connection dynamically on SAP JRA Start Session based on a user specified value.
The only property available on the SAP JRA Start Session action block is the FactoryName ([this seems to be the default case on vesrions 12.1 or later|http://forums.sdn.sap.com/thread.jspa?threadID=2146888]). When I try to pass a value to the property FactoryName, the connection goes through as successful no matter what the input is (even if it is an incorrect value).
How will I be able to dynamically specify which connection it should use?
Using SAP Mii Version 12.1.7 build(50).
Thank you.
Hi
If you are checking the staus of the Start Session action to see if it connected successfully or not then you will always see success as the actual connection only happens during the JRA Function Call action.
So you will need to check the status of the Function call that follows the Start Session.
Regards
Partha
Similar Messages
-
Hello,
I've tried JRA connectivity with a single SAP and I managed it to work.
However, It's not clear to me how can I choose, in a JRA Start Session action block, the connection parameters to the server (server name, instance, username, password, ecc.). I think it uses what I have specified in the JRA definition on Netweaver, during the RAR deployment.
So when I deploy the JRA adapter I can specify connection settings, but when I use the JRA Start Session action I don't have the possibility to recall them. So if I N have multiple connections to different SAP systems via JRA, should I have to deploy N resource adapters with different settings? And how to choose the corrent configuration in the Start Session Action Block?
I hope to have been clear...
thank for your help
MauroThe connection properties are defined within the visual administrator. It's under the server - services - connector container. Under your connector you should have eis/SAPJRAFactory, you can clone this and then set the properties under managed connection factory to the needed server.
Jamie -
Work process re-started , session terminated
Hi Gurus,
While i creating a purchase order (me21n) , the process runs for a while and then i am getting a SAP GUI message "Work process re - started , session terminated" and the session is closed.Can anyone give me the cause of the problem and solution for the same.
Developers Trace File Entry:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:09:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 1680
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:09:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C C Fri Aug 31 16:09:41 2007
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 160937 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I I Fri Aug 31 16:09:53 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C C Fri Aug 31 16:09:54 2007
C Using Provider SQLNCLI
C The IRow interface is supported by this OLEDB provider
S S Fri Aug 31 16:09:55 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EFFBD0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DF30098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DF302C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A A Fri Aug 31 16:09:56 2007
A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
B B Fri Aug 31 16:10:05 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
I I Fri Aug 31 16:10:10 2007
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_01@< appears or changes (state 1)
E E Fri Aug 31 16:10:11 2007
E Replication is disabled
N N Fri Aug 31 16:10:28 2007
N login/password_change_for_SSO : 1 -> 1
B B Fri Aug 31 16:10:38 2007
B table logging switched off for all clients
B B Fri Aug 31 16:10:41 2007
B dbmyclu : info : my major identification is 3232245831, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 96AAC2654435DC46AFA4C31629BE366F.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
S S Fri Aug 31 16:15:55 2007
S found spool memory service RSPO-ACTIONS at 1DF34B50
M M Fri Aug 31 16:20:14 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1680)
When : 8/31/2007 16:20:14.837
Threads : 2
Computer Name : IDES
User Name : SAPServiceI04
Number of Processors: 2
Processor Type: x86 Family 15 Model 6 Stepping 4
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 9cc
eax=00000000 ebx=00000000 ecx=00000014 edx=00000000 esi=003860ec edi=003860c0
eip=7c82ed54 esp=0300daa8 ebp=0300dab8 iopl=0 nv up ei pl nz ac pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000212
function : MmxFree2
00f35dde 2b0568e59701 sub eax,[MmxUheaderSz (0197e568)] ds:0197e568=00000010
00f35de4 50 push eax
00f35de5 68dd000000 push 0xdd
00f35dea ffb4246c010000 push dword ptr [esp+0x16c] ss:0300dc14=7c82f9dd
00f35df1 e890ac1200 call memset (01060a86)
00f35df6 83c40c add esp,0xc
00f35df9 8b4308 mov eax,[ebx+0x8] ds:0300d006=2bf38b08
00f35dfc 8bf3 mov esi,ebx
00f35dfe 2b730c sub esi,[ebx+0xc] ds:0300d006=2444890c
00f35e01 89442418 mov [esp+0x18],eax ss:0601aaaf=00000000
FAULT-> 00f35e05 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e08 7513 jnz MmxFree2+0x4cf (00f35e1d)
00f35e0a 8bce mov ecx,esi
00f35e0c e814a7ffff call MmxIBlockRemove (00f30525)
00f35e11 8b4308 mov eax,[ebx+0x8] ds:0300d006=08460108
00f35e14 014608 add [esi+0x8],eax ds:033930f2=00000000
00f35e17 89742414 mov [esp+0x14],esi ss:0601aaaf=00000000
00f35e1b 8bde mov ebx,esi
00f35e1d 8b7308 mov esi,[ebx+0x8] ds:0300d006=f6f30308
00f35e20 03f3 add esi,ebx
00f35e22 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e25 750d jnz MmxFree2+0x4e6 (00f35e34)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0300e648 00746014 3cc00548 3d07d010 06751220 00000000 disp+work!MmxFree2 [mmxx.c (2440)]
0300e668 006450a7 00000000 00000001 3cc88e78 3cc485e8 disp+work!ab_sqlsclose [absapsql.c (8104)]
0300e690 006466c6 00000013 00750af1 00000000 000000cd disp+work!ab_popbst [abstacks.c (4763)]
0300e698 00750af1 00000000 000000cd 00000000 01c720fa disp+work!ab_poprsql [abstacks.c (1167)]
0300e6cc 006e0f51 00000000 3d170778 00000000 00f00105 disp+work!ab_jsqls [absapsql.c (1306)]
0300e770 00766be4 3d1715b3 3d170778 00000000 01afb3a4 disp+work!ab_extri [abextri.c (431)]
0300e784 007ebf1c 00000000 7c36a42b 000004b6 00571b1a disp+work!ab_xevent [abrunt1.c (261)]
0300e794 00571b1a 3d171080 0000002e 3d170778 3d17139a disp+work!ab_dstep [abdynpro.c (460)]
0300e7bc 005740de 3d170778 3d170778 7c36a42b 00000000 disp+work!dynpmcal [dymainstp.c (2312)]
0300e7d4 00573680 3d17139a 3d170778 00000003 0300fdcc disp+work!dynppai0 [dymainstp.c (1043)]
0300e7f0 00549340 3d170778 00000002 00000001 00000000 disp+work!dynprctl [dymainstp.c (350)]
0300fdcc 004747f4 00000002 0300fe74 00000001 00497626 disp+work!dynpen00 [dymain.c (1375)]
0300fddc 00497626 00000002 00000000 003860a8 00000002 disp+work!Thdynpen00 [thxxhead.c (4353)]
0300feec 004979e0 00000001 7ffd4000 00000000 00000000 disp+work!TskhLoop [thxxhead.c (4117)]
0300ff04 00421d07 00000000 00000000 0300ff60 00401059 disp+work!tskhstart [thxxhead.c (1038)]
0300ff14 00401059 00000003 003860a8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1009)]
0300ff60 01060bcf 00000003 003860a8 003828f8 0152d000 disp+work!main [thxxanf.c (58)]
0300ffc0 77e523e5 00000000 00000000 7ffd4000 80a56be3 disp+work!mainCRTStartup [crtexe.c (398)]
0300fff0 00000000 01060a8c 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id d2c
eax=0000005e ebx=00000103 ecx=00000010 edx=000719bb esi=00000000 edi=00000000
eip=7c82ed54 esp=04a1feb0 ebp=04a1fef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:04a1feb0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:07a2ceb7=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
04a1fef4 00fc37ec 000006ac 00000000 00000000 0038cd48 ntdll!KiFastSystemCallRet
04a1ff84 7c349565 00000000 00000000 00000000 0038cbd0 disp+work!SigIMsgFunc [signt.c (559)]
04a1ffb8 77e6608b 0038cbd0 00000000 00000000 0038cbd0 MSVCR71!endthreadex
04a1ffec 00000000 7c3494f6 0038cbd0 00000000 00000000 kernel32!GetModuleFileNameA
M -
M M Fri Aug 31 16:20:16 2007
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M M Info for wp 0
M M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 0
M tid = 9
M mode = 0
M len = 787
M rq_id = 423
M rq_source = 1
M last_tid = 9
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M M Adresse Offset Data from input buffer
M -
M 054A7D70 000000 00000000 00000000 01502700 00000000 |.........P'.....|
M 054A7D80 000016 00000000 0000009f 74100623 00170000 |........t..#....|
M 054A7D90 000032 04880131 31363000 77696e64 6f77732d |...1160.windows-|
M 054A7DA0 000048 31323532 00100409 00033731 3010041d |1252......710...|
M 054A7DB0 000064 00013010 040f0004 000012ad 10041900 |..0.............|
M 054A7DC0 000080 02000010 05010016 000d0000 000d002b |...............+|
M 054A7DD0 000096 a1001fa2 00000000 00000000 0000100c |................|
M 054A7DE0 000112 08001000 00029f00 00047400 00029f00 |..........t.....|
M 054A7DF0 000128 00047410 0a010009 00000000 00000000 |..t.............|
M 054A7E00 000144 00100a03 00090100 00000000 78001f10 |............x...|
M 054A7E10 000160 0a030009 03000900 00007800 0a100a03 |..........x.....|
M 054A7E20 000176 00090200 00000300 75000a10 0a030009 |........u.......|
M 054A7E30 000192 01000000 00007500 0a100a05 00090100 |......u.........|
M 054A7E40 000208 00000000 75000910 090e00c8 00c80000 |....u...........|
M 054A7E50 000224 00000075 00090000 23000700 0200000c |...u....#.......|
M 054A7E60 000240 01000000 00002300 82003c00 00000003 |......#...<.....|
M 054A7E70 000256 00070000 00070000 00000000 00000000 |................|
M 054A7E80 000272 00000000 00000000 00020005 00020002 |................|
M 054A7E90 000288 000c0014 00110003 0001000a 000e0005 |................|
M 054A7EA0 000304 00060003 000a000f 000c0008 000a000c |................|
M 054A7EB0 000320 000c0008 00030003 0002000a 0005000a |................|
M 054A7EC0 000336 0005000a 0005000a 00050005 00011100 |................|
M 054A7ED0 000352 11001100 11001100 11001100 11001100 |................|
M 054A7EE0 000368 11001100 11001100 11001100 11001100 |................|
M 054A7EF0 000384 11001100 11001100 11001100 11001100 |................|
M 054A7F00 000400 11001100 11001100 11001100 11001100 |................|
M 054A7F10 000416 11001100 100c0200 18000000 07000000 |................|
M 054A7F20 000432 23000000 07000000 00000000 00000000 |#...............|
M 054A7F30 000448 00100909 00180001 00077920 20202020 |..........y |
M 054A7F40 000464 20202020 20202020 31303030 0000100a | 1000....|
M 054A7F50 000480 01000900 00000000 00000000 100a0300 |................|
M 054A7F60 000496 09010000 00000078 001f100a 03000902 |.......x........|
M -
M M *****************************************************************************
M *
M * LOCATION SAP-Server ides_I04_00 on host ides (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Aug 31 16:20:16 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 3
M *
M *****************************************************************************
M M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was set. rc: 1 BREAK_REQUESTED
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
M ThDelEnqInfo: del enq_own >20070831161118747000000000ides............................</1
M ThDelEnqInfo: act enq info: 1
M ThDelEnqInfo: del enq_own >20070831161118747000010000ides............................</2
M ThDelEnqInfo: act enq info: 0
A TH VERBOSE LEVEL FULL
C Fri Aug 31 16:20:17 2007
C SQLBREAK: BREAK_REQUESTED upgraded to BREAK_IN_PROGRESS sloledb.cpp 4187
M Fri Aug 31 16:20:18 2007
M SosSearchAnchor: search anchor for 4
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThSaveContext: roll out
M ThRollOut: roll out T9/U13/M0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U13 M0 I1 (Level 7) ok
M ThCheckEmMagic: check em magic at 3CC00A80 for T9/M0/I1
M ThCheckEmMagic: em magic at 3CC00A80 for T9/M0/I1 o.k.
M ThEmContextDetach2: detach T9/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE YES YES NO 255 255 20070831 160937 IDES C Rollback Work (0)
B Disconnected from connection 0
B statistics db_con_commit (com_total=149, com_tx=34)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c 357]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:20:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 2460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:20:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C C Fri Aug 31 16:20:38 2007
C Using Provider SQLNCLI
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 162037 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C Using Provider SQLNCLI
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EF7370
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DEF0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DEF02C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ThCheckPrevUser: clean previous user T9/U13/M0
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 0
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M C The IRow interface is supported by this OLEDB provider
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1283]I Got the same problem but at that time i have installed GUI of lower version. WHen i have upgraded the GUI it worked fine. Better you check once the SAPGUI configuration.
-
Dynamic Connection Pool Creation Failing in a cluster
Hi,
I am trying to create a connection pool in a clustered environment. This connection
pool is created lazily behind a Stateless Session Bean. We first attempt to determine
whether, the connection pool exists using JdbcServices.poolExists(someName), and
create it if it does not exist. A failure occurs on creation because it looks
like the connection pool might have been created by a bean on a different weblogic
VM instance. Is there any way to dynamically create a connection pool and make
it visible to the whole cluster? Thanks in advance for any help. Michael Dolbear
Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence of connection pool
Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection pool ContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException: weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
at weblogic.management.internal.Helper.createMBean(Helper.java:383)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.java:47
2)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:727
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:709
at com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.createConne
ctionPool(ConnectionPoolCreator.java:82)
at com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnectionPoo
lIfNonExistent(DataStoreRepository.java:211)
at com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createConnec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.create
ConnectionPoolIfNeeded(Unknown Source)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.getIma
ge(Unknown Source)
at com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unknown
Source)
at java.lang.reflect.Method.invoke(Native Method)
at com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescriptio
n.java:181)
at com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.java:7
9)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.java:
186)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invoke(Ser
viceBean_bjedmi_EOImpl.java:37)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSkel.inv
oke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence of connection
pool Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection pool ContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException: weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
at weblogic.management.internal.Helper.createMBean(Helper.java:383)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException: domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:
2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanSer
verImpl.java:181)
at weblogic.management.internal.Helper.createMBean(Helper.java:376)
at weblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(RemoteMBean
ServerImpl.java:278)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
635)
at weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.java:
621)
at weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBeanHome
Impl.java:397)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.java:47
2)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:727
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:709
at com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.createConne
ctionPool(ConnectionPoolCreator.java:82)
at com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnectionPoo
lIfNonExistent(DataStoreRepository.java:211)
at com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createConnec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.create
ConnectionPoolIfNeeded(Unknown Source)
at com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.getIma
ge(Unknown Source)
at com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unknown
Source)
at java.lang.reflect.Method.invoke(Native Method)
at com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescriptio
n.java:181)
at com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.java:7
9)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.java:
186)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invoke(Ser
viceBean_bjedmi_EOImpl.java:37)
at com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSkel.inv
oke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)The only way to do it is using MBeans. You could search this newsgroup
for "JDBCConnectionPoolMBean" to get an idea of how it could be done.
Slava
P.S. http://search.bea.com/weblogic/gonews
"Mark Mortensen" <[email protected]> wrote in message
news:[email protected]...
>
Slava,
I am working with Mike on this issue and wanted to add some moreclarifications.
We have a two server cluster where one of the EJB's on one of the Managedservers
creates the connection pool. The problem comes in when a request comes tothe
second server in the cluster. The connection pool is created by the firstserver
but it is only assigned to the first server in the targets section on theconsole.
It isn't assigned to the cluster. Is there a way to programmaticallyassign the
pool to the cluster instead of just the server that created the pool?
-Mark
"Michael Dolear" <[email protected]> wrote:
Hi Slava,
Here is what I am doing. The code is spread across a couple of classes.
I am using
what was described in BEA's doc on dynamic connection pool creation.
I didn't
see anything about MBean apis required:
* Dynamically create a connection pool using
aConnectionPoolProperties.
Please
see ConnectionPoolCreator
* for the required properties that must be sent in.
* @param aConnectionPoolProperties
public synchronized void createConnectionPoolIfNonExistent(Properties
aConnectionPoolProperties)
throwsPersistenceFrameworkInitializationException
ConnectionPoolCreator tempPoolCreator;
Pool tempPool;
tempPoolCreator = new ConnectionPoolCreator();
tempPool =tempPoolCreator.getConnectionPool(aConnectionPoolProperties);
if (tempPool == null)
tempPoolCreator.createConnectionPool(aConnectionPoolProperties);
>>
* Create Connection pool given the properties that I have beenconfigured
with
* @return Pool
public Pool createConnectionPool(Properties aConnectionProperties)
throwsPersistenceFrameworkInitializationException
JdbcServices tempServices;
try
tempServices = this.lookupJdbcServices();
tempServices.createPool(aConnectionProperties);
returntempServices.getPool(aConnectionProperties.getProperty(CONNECTION_POOL_NAME)
catch (Exception e)
PersistenceFrameworkUtils.logException(e);
throw newPersistenceFrameworkInitializationException(e.getMessage());
* Answer a connectionPool or null.
* @return Pool
public Pool getConnectionPool(Properties aConnectionProperties)
throwsPersistenceFrameworkInitializationException
JdbcServices tempServices;
try
tempServices = this.lookupJdbcServices();
if (tempServices.poolExists(
aConnectionProperties.getProperty(CONNECTION_POOL_NAME)))
return tempServices.getPool(
aConnectionProperties.getProperty(CONNECTION_POOL_NAME));
else
return null;
catch (Exception e)
PersistenceFrameworkUtils.logException(e);
throw
newPersistenceFrameworkInitializationException(e.getMessage());
"Slava Imeshev" <[email protected]> wrote:
Hi Michael,
Could you show us the code? Without looking at the code
I can only say that JdbcServices.poolExists(someName)
returns true only in case the pool is up and running.
If the connection pool MBean was created but not assigned
a target, subsequent tries to create it would fail.
Regards,
Slava Imeshev
"Michael Dolbear" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am trying to create a connection pool in a clustered environment.This
connection
pool is created lazily behind a Stateless Session Bean. We first
attempt
to determine
whether, the connection pool exists usingJdbcServices.poolExists(someName), and
create it if it does not exist. A failure occurs on creation becauseit
looks
like the connection pool might have been created by a bean on a
different
weblogic
VM instance. Is there any way to dynamically create a connection pooland
make
it visible to the whole cluster? Thanks in advance for any help.
Michael
Dolbear
Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence ofconnection pool
Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection poolContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException:weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
atweblogic.management.internal.Helper.createMBean(Helper.java:383)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.ja
va
:47
2)
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
727
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
709
at
com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.create
Co
nne
ctionPool(ConnectionPoolCreator.java:82)
at
com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnecti
on
Poo
lIfNonExistent(DataStoreRepository.java:211)
at
com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createC
on
nec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.c
re
ate
ConnectionPoolIfNeeded(Unknown Source)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.g
et
Ima
ge(Unknown Source)
at
com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unk
no
wn
Source)
at java.lang.reflect.Method.invoke(Native Method)
at
com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescr
ip
tio
n.java:181)
at
com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.j
av
a:7
9)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.
ja
va:
186)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invok
e(
Ser
viceBean_bjedmi_EOImpl.java:37)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSke
l.
inv
oke(Unknown Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.ja
va
:93
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Checking existence ofconnection
pool Content
ConnectionPool requested by user guest>
<Mar 28, 2002 5:35:08 PM MST> <Info> <JDBC> <Creating connection poolContentConnectionPoo
l requested by user guest>
weblogic.common.ResourceException:weblogic.management.MBeanCreationException:
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.MBeanCreationException: - with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool]
atweblogic.management.internal.Helper.createMBean(Helper.java:383)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
- with nested exception:
[javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=J
DBCConnectionPool
Start server side stack trace:
javax.management.InstanceAlreadyExistsException:domain:Name=ContentConnectionPool,Type=JD
BCConnectionPool
at
com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:1
34
at
com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.
ja
va:
2352)
at
com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:
87
4)
at
weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBe
an
Ser
verImpl.java:181)
atweblogic.management.internal.Helper.createMBean(Helper.java:376)
atweblogic.management.internal.Helper.createAdminMBean(Helper.java:291)
at
weblogic.management.internal.RemoteMBeanServerImpl.createAdminMBean(Remote
MB
ean
ServerImpl.java:278)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
635)
at
weblogic.management.internal.MBeanHomeImpl.createAdminMBean(MBeanHomeImpl.
ja
va:
621)
at
weblogic.management.internal.AdminMBeanHomeImpl.createAdminMBean(AdminMBea
nH
ome
Impl.java:397)
atweblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at
weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.ja
va
:47
2)
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
727
at
weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.jav
a:
709
at
com.thc.ids.inf.framework.opf.rdbms.datastore.ConnectionPoolCreator.create
Co
nne
ctionPool(ConnectionPoolCreator.java:82)
at
com.thc.ids.inf.framework.opf.datastore.DataStoreRepository.createConnecti
on
Poo
lIfNonExistent(DataStoreRepository.java:211)
at
com.thc.ids.inf.util.persistence.content.ConnectionPoolInitializer.createC
on
nec
tionPoolIfNeeded(ConnectionPoolInitializer.java:48)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.c
re
ate
ConnectionPoolIfNeeded(Unknown Source)
at
com.thc.ids.inf.services.business.crs.spi.oracle.OracleRetrievalProvider.g
et
Ima
ge(Unknown Source)
at
com.thc.ids.inf.services.business.crs.ContentRetrievalService.getImage(Unk
no
wn
Source)
at java.lang.reflect.Method.invoke(Native Method)
at
com.thc.ids.inf.util.reflection.MethodDescription.invokeMethod(MethodDescr
ip
tio
n.java:181)
at
com.thc.ids.inf.util.reflection.MethodInvocation.invoke(MethodInvocation.j
av
a:7
9)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean.invoke(ServiceBean.
ja
va:
186)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl.invok
e(
Ser
viceBean_bjedmi_EOImpl.java:37)
at
com.thc.ids.inf.framework.service.J2EE.ejb.ServiceBean_bjedmi_EOImpl_WLSke
l.
inv
oke(Unknown Source)
atweblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.ja
va
:93
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java
:2
2)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120) -
Dynamic Connection to different servers are not working
Hi All,
I am trying to create a SSIS Package that loops through a table containing the server names and fetching results from all the servers.
Created two variables
--list is an object
--itr is an string variable
I have created a table "Serverlist" that contains all the servernames,
and using a OLE DB connection with a property "Servername" --> user::itr. used for loop through all the servers in for Each loop.
The execution is started, showing the results for one server and failed with the below error"
"[OLE DB Source [29]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call
to the connection manager "src" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
[SSIS.Pipeline] Error: OLE DB Source failed validation and returned error code 0xC020801C."
Any suggestions are welcome.Hi,
Are you passing the correct servername, password, login, database in your connection string??
Are you getting the value at runtime?
Try this: Click on the package and on the property try to set the DelayValidation=True.
If the DelayValidation is true the package will validate the connections before it execute. If DelayValidation is false it will validate when the package is running.
So if you have a dynamic connection I suggest you set it the DelayValidation=False -
We are developing an Adapter module for "File Sender Adapter" and in that we have a requirement to call an RFC. We are trying to use SAP JRA (Java Resource Adapter) for doing this as we do not want to hard code the password in the module by using direct JCO connections.
Using JRA we are able to invoke RFC in our adapter module but the message payload does not go to the next module (Standard module) in the chain. We identified that as soon as we get the connection handle using statement:
Connection connection = connectionfactory.getConnection();
message is not going to next module in the chain. We are also not getting any error or exception anywhere. It is just that the message is not getting processed. Any help or idea would be appreciated.
RegardsHi Amol
I was not able to this today as I do not having authorization in our development system for exposing RFC as webservice and waiting for the authorization.
I want to know if I expose the RFC as webservice in development server, will it be transported via normal ABAP transport procedure in the landscape (will this require any change in config etc.) or I need to expose it separately in different server.
James -
New tools in /usr./sap/put/exe do not connect to the database.
As per CHECKS LOG, In the Initialization phase.
the new tools in /usr/sap/put/exe do not connect, Check environment settings or adapt language files.
currently on a distributed env, with 4.6D kernel, oracle 10.2.02 client on CI
Oracle 10.2.0.2 server on the database.
Initialization phase fails with the above error. please help.. urgent....
I believe the new set of R3trans, tp, R3load tools in /usr/sap/put/exe are unable to connect to the database, while the current set of tools in /usr/sap/<SID>exe/run are working fine.
DBCONNCHECK.LOG for further details.
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 08.02.2008 - 23:54:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w C:\oracle\log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 08 23:54:38 2008 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 10389 0.010389
4 ETW000 [dev trc ,00000] using "D:\usr\sap\put\exe\dboraslib.dll" 4689 0.015078
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 5920 0.020998
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 102 0.021100
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 81 0.021181
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 11 0.021192
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 21 0.021213
4 ETW000 [dev trc ,00000] New connection 0 created 15 0.021228
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.021257
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.021271
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.021283
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.021298
4 ETW000 [dev trc ,00000] Prepending C:\oracle\ora10_32 to Path. 178 0.021476Yes i am on x86_64 bit Windows 2003 SP1, 4.6D kernel is running in 32-bit mode.Database sits on a diffrent host and is upgraded to Oracle 10.2.0.2.
In that case , do i need install PREPARE in 32 bit mode so that all executables in put\exe will be working in 32 bit mode.
Could you please also look into note,
906205 - Upgrading SAP system <= 4.6 on x86_64 Windows
Actions after PREPARE (before you start the upgrade)
1. -
2. Unpack ORACLE Client 10.2 into directories \usr\sap\put\exe and \usr\sap\<SID>\sys\exe\run.
a) Mount the CD which contains the ORACLE 10.2 client software and change to subdirectory OCL_WINDOWS_X86_64.
b) Start a command prompt and change into directory \usr\sap\put\exe.
c) Type 'sapcar.exe -xvf <DIR>\OCL10264.SAR'.
d) Start a command prompt and change into directory \usr\sap\<SAPSID>\sys\exe\run.
e) Type 'sapcar.exe -xvf <DIR>\OCL10264.SAR'
As per the note, 64 bit client has to uncarred "After Prepare before Upgrade", since the tools in /usr/sap/put/exe are not able to connect to the database since they are in 64 bit mode, and my Initialization phase fails, i uncarred the client into put/exe during PREPARE.
Please guide. What problems should i anticipate in the PREPARE phase when it builds shadow instance.
Govind. -
Giving START WITH dynamically in a query
Hi,
How do you specify the value in START WITH dynamically during runtime.
For example please consider the bewlo scenario:
CREATE TABLE ISCT
ITEM_NO VARCHAR2(15 CHAR) NOT NULL,
ITEM_TYPE VARCHAR2(3 CHAR) NOT NULL,
ITEM_TYPE_SCO VARCHAR2(3 CHAR) NOT NULL,
ITEM_NO_SCO VARCHAR2(15 CHAR) NOT NULL,
ARTSAL_SEQ_PRIO NUMBER(3) NOT NULL,
ART_SCO_QTY NUMBER(6,3) NOT NULL,
ITEM_SEQ_PRIO NUMBER(3),
PCKL_SEQ_PRIO NUMBER(3),
REG_DATE DATE NOT NULL,
UPD_DATE DATE NOT NULL,
DELETE_DATE DATE,
USER_NO_CHG VARCHAR2(7 CHAR) NOT NULL
CREATE TABLE ICONT
ITEM_TYPE VARCHAR2(3 CHAR) NOT NULL,
ITEM_NO VARCHAR2(15 CHAR) NOT NULL,
ITEM_TYPE_CHILD VARCHAR2(3 CHAR) NOT NULL,
ITEM_NO_CHILD VARCHAR2(15 CHAR) NOT NULL,
ITEM_QTY_CHILD NUMBER(5) NOT NULL,
REG_DATE DATE NOT NULL,
UPD_DATE DATE NOT NULL,
DELETE_DATE DATE,
II_DATE DATE NOT NULL,
IU_DATE DATE NOT NULL,
SORT_NO NUMBER(5)
Now inserting rows:
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('15795', 'CCI', 'SCI', '00245905', 25,
1, NULL, NULL, TO_DATE('10/03/2009 15:40:01', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('00245781', 'SCI', 'SCI', '00245905', 1,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('80067553', 'ART', 'SCI', '00245905', 2,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('84178910', 'ART', 'SCI', '00245905', 3,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('70132375', 'ART', 'SCI', '00245905', 4,
8, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('30067555', 'ART', 'SCI', '00245905', 5,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('50067559', 'ART', 'SCI', '00245905', 6,
5, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('14278710', 'ART', 'SCI', '00245905', 7,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('00130092', 'ART', 'SCI', '00245905', 8,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('10110159', 'ART', 'SCI', '00245905', 9,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('30124693', 'ART', 'SCI', '00245905', 10,
4, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('80130093', 'ART', 'SCI', '00245905', 11,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('90110155', 'ART', 'SCI', '00245905', 12,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('60035916', 'ART', 'SCI', '00245905', 13,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('54249810', 'ART', 'SCI', '00245905', 14,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('14180110', 'ART', 'SCI', '00245905', 15,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('97872010', 'ART', 'SCI', '00245905', 16,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('34180010', 'ART', 'SCI', '00245905', 17,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('57871710', 'ART', 'SCI', '00245905', 18,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('40067588', 'ART', 'SCI', '00245905', 19,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('00067590', 'ART', 'SCI', '00245905', 20,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('80067586', 'ART', 'SCI', '00245905', 21,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('20145196', 'ART', 'SCI', '00245905', 22,
2, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('00067585', 'ART', 'SCI', '00245905', 23,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('80124087', 'ART', 'SCI', '00245905', 24,
1, NULL, 1, TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/03/2009 15:46:04', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1008920');
Insert into isct
(ITEM_NO, ITEM_TYPE, ITEM_TYPE_SCO, ITEM_NO_SCO, ARTSAL_SEQ_PRIO,
ART_SCO_QTY, ITEM_SEQ_PRIO, PCKL_SEQ_PRIO, REG_DATE, UPD_DATE,
DELETE_DATE, USER_NO_CHG)
Values
('39809661', 'SPR', 'SCI', '00245781', 1,
1, 1, 1, TO_DATE('10/04/2009 15:24:22', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('10/04/2009 15:24:22', 'MM/DD/YYYY HH24:MI:SS'),
NULL, '1007193');
Insert into icont (ITEM_TYPE,ITEM_NO,ITEM_TYPE_CHILD,ITEM_NO_CHILD,ITEM_QTY_CHILD,REG_DATE,UPD_DATE,DELETE_DATE,II_DATE,IU_DATE,SORT_NO) values ('SPR','39809661','ART','44178610',1,to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),null,to_timestamp('15-NOV-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('20-DEC-07','DD-MON-RR HH24.MI.SSXFF'),2);
Insert into icont (ITEM_TYPE,ITEM_NO,ITEM_TYPE_CHILD,ITEM_NO_CHILD,ITEM_QTY_CHILD,REG_DATE,UPD_DATE,DELETE_DATE,II_DATE,IU_DATE,SORT_NO) values ('SPR','39809661','ART','70132375',1,to_timestamp('06-SEP-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('06-SEP-07','DD-MON-RR HH24.MI.SSXFF'),null,to_timestamp('15-NOV-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('20-DEC-07','DD-MON-RR HH24.MI.SSXFF'),4);
Insert into icont (ITEM_TYPE,ITEM_NO,ITEM_TYPE_CHILD,ITEM_NO_CHILD,ITEM_QTY_CHILD,REG_DATE,UPD_DATE,DELETE_DATE,II_DATE,IU_DATE,SORT_NO) values ('SPR','39809661','ART','74249710',1,to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),null,to_timestamp('15-NOV-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('20-DEC-07','DD-MON-RR HH24.MI.SSXFF'),3);
Insert into icont (ITEM_TYPE,ITEM_NO,ITEM_TYPE_CHILD,ITEM_NO_CHILD,ITEM_QTY_CHILD,REG_DATE,UPD_DATE,DELETE_DATE,II_DATE,IU_DATE,SORT_NO) values ('SPR','39809661','ART','80067553',1,to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('23-FEB-07','DD-MON-RR HH24.MI.SSXFF'),null,to_timestamp('15-NOV-07','DD-MON-RR HH24.MI.SSXFF'),to_timestamp('20-DEC-07','DD-MON-RR HH24.MI.SSXFF'),1);
COMMIT;
Now if you create a view:
create or replace view test_v
(ITEM_NO, ITEM_TYPE, ITEM_NO_SCO,ITEM_TYPE_SCO)
as
SELECT T.ITEM_NO, T.ITEM_TYPE, CONNECT_BY_ROOT T.ITEM_NO_SCO,T.ITEM_TYPE_SCO
FROM
SELECT NVL(C.ITEM_NO_CHILD, I.ITEM_NO) ITEM_NO, NVL(C.ITEM_TYPE_CHILD, I.ITEM_TYPE) ITEM_TYPE, I.ITEM_TYPE_SCO, I.ITEM_NO_SCO
FROM isct I,
icont C
WHERE I.ITEM_NO = C.ITEM_NO(+)
AND I.ITEM_TYPE = C.ITEM_TYPE(+)
) T
CONNECT BY PRIOR T.ITEM_NO = T.ITEM_NO_SCO AND PRIOR T.ITEM_TYPE = T.ITEM_TYPE_SCO;
Then run the below query:
select * from test_v where item_no_sco = '00245905'
the output is got within a second. but the real scenario is that both table icont and isct have millions of rows. In that case even this small query of the view takes 10minutes as there a FULL TABLE JOIN.
How do I give the START WITH in the view to make it faster i.e.
even with millions of rows the output of this comes in seconds:
SELECT T.ITEM_NO, T.ITEM_TYPE, CONNECT_BY_ROOT T.ITEM_NO_SCO,T.ITEM_TYPE_SCO
FROM
SELECT NVL(C.ITEM_NO_CHILD, I.ITEM_NO) ITEM_NO, NVL(C.ITEM_TYPE_CHILD, I.ITEM_TYPE) ITEM_TYPE, I.ITEM_TYPE_SCO, I.ITEM_NO_SCO
FROM isct I,
icont C
WHERE I.ITEM_NO = C.ITEM_NO(+)
AND I.ITEM_TYPE = C.ITEM_TYPE(+)
) T
START WITH T.ITEM_NO_SCO = '00245905'
CONNECT BY PRIOR T.ITEM_NO = T.ITEM_NO_SCO AND PRIOR T.ITEM_TYPE = T.ITEM_TYPE_SCO;
I want to summarize the above the post, you can use START WITH in a stand alone query, in a function etc. But how do you use it in a VIEW?
Thanks,
Vikramuser12004283 wrote:
Hi,
Thanks for the quick replies.
I was more looking for a solution with only SQL i.e I dont want to go for any package or outside variable.
Isn't there a way to achieve this through advanced SQL?
Also why when I create a join in a query having connect by without start with it does a full table scan of the joined table, isnt there a better way to create a join, I mean there is no need to run the whole view at a time, it would be run with a input but why isnt the connect by using to input as a START WITH!
Thanks,
VikramBut the solution is "only SQL", that you have to initialize a variable doesn't change that fact.
If you absolutely can't make that solution work, you could code this in DYNAMIC SQL, but that would much more 'bad' than the suggested implementation.
Why exactly do you need a view at all for this?
SELECT
NVL(C.ITEM_NO_CHILD, I.ITEM_NO) as ITEM_NO,
NVL(C.ITEM_TYPE_CHILD, I.ITEM_TYPE) as ITEM_TYPE,
CONNECT_BY_ROOT I.ITEM_NO_SCO as ITEM_NO_SCO,
I.ITEM_TYPE_SCO
FROM isct I,
icont C
WHERE I.ITEM_NO = C.ITEM_NO(+)
AND I.ITEM_TYPE = C.ITEM_TYPE(+)
start with I.ITEM_NO_SCO = :YOUR_BIND_VARIABLE
CONNECT BY PRIOR I.ITEM_NO = I.ITEM_NO_SCO AND PRIOR I.ITEM_TYPE = I.ITEM_TYPE_SCO;Is about as simple as it gets, no need for a view ... no need for anything flashy. What is your justification behind 'needing' a view for this? -
Hi there,
I like to use SAP JRA within a JBoss Application Server, I use the rar-file provided by Web AS. I knew that there were other posts regarding this topic, but they did not really answer my question:
The Thread
JCO and JRA under JBoss
says:
u201Cthat you use in JBoss the standalone JCO. But JRA needs the JCO provided withing SAP Web AS.u201C
I get the same error mentioned in the Thread above. Does the above mentioned mean if I use the JCO provided within SAP WEB AS in JBoss than this will work? Iu2019m really confused can you help me??
Thank you all!!A few more hints, the quick version
JRA via BLS logfiles are usually placed in
C:\usr\sap\<SID>\JC00\j2ee\cluster\server0\, in my case called dev_rfc.trc.
JRA Connections can be found and verified with the following tool.
http://localhost:port -> Web dynpro -> Web dynpro console -> Jco connection pools.
In Visual administrator -> Server0 -> Services -> Connector container -> Your JRA name. Select the connection name belov and select tab Managed connection factory, then properties.
Here you can add one of the following
Trace - Enable/disable trace on all middleware layers(true or false). On default is false.
TraceRFC - Enable/disable RFC trace (true or false). On default is false.
TraceJCO - Enable/disable JCO trace (0 for none, 10 for highest level). On default 0. Type Integer.
TraceJRA - Enable/disable JRA trace (0 for none, 10 for highest level). On default 0. Type Integer.
Which enables further logging, also found in the dir.
C:\usr\sap\<SID>\JC00\j2ee\cluster\server0\. -
In RAC Database All sessions are connecting to Node1 only
Hi Gurus,
Oracle RAC 10R2.
OS: IBM AIX
We have two node RAC instance. When I checked, all sessions are connecting to NODE1. and node2 is not having any worload.
can you guys suggected me from where I start troubleshooting.
Thanks,
ChinmayHi Chinmay,
Check for active_instance_count parameter in database.If it's value is 1, database connection will go to only one instance.To check to which instance it will go you can use below query.
select INSTANCE_NAME,HOST_NAME,INSTANCE_ROLE from gv$instance;
Instance_role has two value: active instance (=primary instance) or a passive instance (secondary instance).
Connection will always go to active instance only.
Regards
Sushant -
Internet sessions, VPN session, and connections dropping frequently
I'm in an apartment. This problem started about a week ago. All of my browser sessions, vpn session, and connections such as AIM or netflix drop frequently. I often have to click links twice to get a page to load. I have to reload videos a lot to get them to continue to stream. I am constantly signing in and out of AOL IM.
I believe the problem has to do with several MoCs (coax connections) listed on my router page, and these MoCs have names of other people on them. Until I noticed them a week ago, I had only seen one MoC belonging to me listed on the router connection page.
Thus, I think that something got crossed up of misconfigured in the ONT for my apartment complex. The gateway light on my router stays green as all of these problems happen.
Pinging google.com, I get
--- google.com ping statistics ---76 packets transmitted, 55 packets received, 27.6% packet lossround-trip min/avg/max/stddev = 31.282/39.339/48.217/3.548 ms
Anyone seen this before and know how to get verizon to fix this?
I have had nothing but problems with FIOS since getting it, and I have wasted a lot of time with their "customer support."I am sorry to hear about your connection problems. I have sent you a private message so we can get your information and look more deep into your connection.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Error message from 4i: Locator unable to start session.
I got this message when i attempt to connect to the discoverer viewer. Anyone has any ideas. Please:
Unable to connect to the Oracle Discoverer Application Server. Locator unable to start session "4ivOracleDiscovererSession4"Hi Norm,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
(Repair both Drives)
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Hi there,
I am trying to call BAPI methods on an ECC server from inside an Java EE server (JBoss AS). I can use JCO to accomplish this, and I am interested in using connection pools. I do know that JCO has built-in mechanisms in handling this (JCO connection pools), but upon reading the SAP JRA, I thought that that would be a much more elegant and proper solution, given that it complies with JCA. Can JRA be used on JBoss? If anyone can point me to useful information on integrating this with JBoss and some code examples it would be much appreciated. Thanks!hi jose,
we can integrate the portal of jboss in one side and sap ep in other side and the we can make the connection as two way by using fedarated network portal. jboss portal user can make the request from jboss portal he can get the data from sap portal
http://www.jboss.org/jbossportal/
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/97171dd3-0401-0010-5195-b43f556e6ce9?overridelayout=true
let me know u need any further information
bvr -
How to use one dynamic connection managers for multiple parallel data flow tasks
hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables. -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J
Maybe you are looking for
-
BUG: Face recognition data not saved to images.
i have the option to automatically save XMP data into the images activated. so all keywords and metadata changes are not only saved to the catalog but also into my DNG and TIFF images. now this works fine for everything except the new face recognitio
-
Third party USB cable detected by IOS 7 update
Yesterday I had a working Ipad2 and foolishly I allowed it to update itself. Big mistake! After all sorts of hangs, reboots etc I got it working again and then watched the battery drain before my eyes. Charged it overnight and after 12 hours it was a
-
hi how to install OEL 5.4 from kernel source code? i am using OEL 5.2,now i want build the OEL 5.4 and nstall it from the source code.how to do that? regards
-
hi every one i am using oracle 6i. In Form button i have label m font is Wingdings 3 and in 6i it's working properly but when i compile form in 10g then it's compile perfectly. when i run this form in 10g then button how m.
-
Message: we can't remove windows accounts
We have installed Office 2013 Pro Plus via our E3 O365 subscription. It automatically connects the components (Word, Excel, ...) to the domain user account [email protected] in our case. We want to get rid of that account and connect Word, etc to the