SAP JVM patching with SUM

Hi All,
I am unable to patch JVM, below is the error, Please guide me
Thanks,
Dheeraj

Thanks Reagan,
So I can deploy SAP JVM patch and its a .SAR file.
I have created a directory and uploaded the file in place.
Now I tried starting the SUM Tool and below is the error.
"The file /usr/sap/trans/EPS/in/SUM/sdt/.lock could not be locked. Check the write permissions and whether the controller is already started."
Regards,
Dheeraj

Similar Messages

Deployment of JAVA-Patches with SUM failed, MOPZ has downloaded malicious code

some time ago, we did an upgrade of our doublestack PI-System from NW-PI-700-SPS18 to NW-PI-731-SPS05.
Now, i wanted to upgrade this PI-system from NW-PI-731-SPS05 to NW-PI-731-SPS07.
with SUM 1.0 SP10 PL4 we are now failing in the Execution-phase (Downtime):
Error in phase 5.6. execution (downtime) of the JAVA-Part
F ********************************************************************************
F *** ERROR => Node 'deployment' failed with exit code 67.
F ***
F *** Please see section 'Failures in the 'deploying offline components' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
and the instance could not start up anymore !?
in sap-note 1316652 there is mentioned a separate sap-note 1550641 for this error
http://service.sap.com/sap/support/notes/1316652
in sap-note 1550641 - Update fails-Node 'deployment' failed with exit code 67.
http://service.sap.com/sap/support/notes/1550641
Solution:
A fix cannot be deployed as a patch, because the deployer itself is broken.
The solution is to reset a back up state of the system, to download the new version of the stack from SAP Marketplace, and to rerun the update/upgrade procedure.
i downloaded the patch-stack (with Solman MOPZ) some days ago,
so MOPZ did download the malicious code of deployment components..... ?!
so what to do?

Hi,
sorry for my late reply,
but the whole story needs a lot of time (nearly 2 month) and finally ends successfully.
first: (summary) the main-title of this thread is wrong,
it was not MOPZ or Solman download, what caused this issue.
the problem was caused by a remaining (old) sapxmltoolkit.jar in the java-bootstrap folder
details are coming ...
(all dates in yyyy-mm-dd)
=========================================
2014-05-16 at 13:04 CET:
SUM upgrade hangs with java-server did not start (in phase 5.2. Execution = downtime)
i opend OSS-ticket with several details + logs attached and opened the connection to our system.
SAP-Ticket, prio_Medium (because it is "only" a sandbox issue),
2014-05-30 at 20:21 CET:
1."sign-of-live" from sap-support,
Asking for additional logfiles from the work-directory of the sap-system
2014-06-02 at 11:14 CET:
my Answer to the questions and adding the demanded logfiles.
2014-06-02 at 21:57 CET:
2.answer from SAP-support, asking to repeat the last SUM-step, to see, if the issue is still there
2014-06-03 at 10:22 CET:
my answer after repeating SUM-step and attaching new logfiles.
2014-06-03 at 21:18 CET:
3.answer from SAP-support, i should check if system is up and running, if hostname, port-no is correct.
2014-06-03 at 10:22 CET:
my answer: hostname + portnr are o.k. - but system still did not startup (java-server)
2014-06-04 at 19:30 CET:
4.answer from SAP-support, delivering an upload-URL, could not read attached splitted .zip-files of log-files
2014-06-05 at 07:28 CET:
i did collect all logfiles again and uploaded them to the 1.upload-URL
2014-06-05 at 16:48 CET:
5.answer from SAP-support, give hint to sap-note: 1550641 - Update fails-Node 'deployment' failed with exit code 67
2014-06-06 at 10:17 CET:
i answered that (in my opinion) the mentioned sap-note did not match the issue (only to NW-7.00) ,
because i did not have to change anything, only i should do a restore from tape and start SUM from the beginning,
i insisted in more and deeper investigations by SAP-support.
2014-06-06 at 19:00 CET:
6.answer of SAP-support: moving the ticket to the next support-level (developm.support)
2014-06-09 at 10:11 CET:
7.answer from SAP-support: asking for new submittion of logfiles of work-dir.
2014-06-10 at 08:39 CET:
asking for a new upload-URL because of large logfiles
2014-06-10 at 17:31 CET:
8.answer from SAP-support: providing an new upload-URL
2014-06-10 at 17:53 CET:
i did collect all logfiles again and uploaded them to the 2.upload-URL
2014-06-12 at 09:07 CET:
9.answer from SAP-support: asking for more details, listings of directory-content of ..../j2ee/cluster/...
2014-06-12 at 10:23 CET:
i did collect all dir-infos and attached a doc to the ticket
2014-06-19 at 10:11 CET:
10.answer from SAP-support: asking for WTS-connection to start investigate and debung on our systems
2014-06-23 at 10:44 CET:
i answered, and provided WTS-connection info
2014-06-26 at 13:12 CET:
11.answer from SAP-support: could not see a running SID-engine, no SAP-MC, no directory, no folder, where is the engine?
2014-06-27 at 08:01 CET:
i answered, and provided detailed server-info and WTS-connection info,
remembering that SID is in SUM-downtime and java-server is not running, because could not be startet,
2014-06-30 at 14:01 CET:
12.answer from SAP-support: asking for an installed java6-sdk(jdk), the java6-jre is not enough to debug.
2014-07-02 at 11:40 CET:
my answer after installing java6-sdk on the WTS-server,
2014-07-07 at 15:11 CET:
13.answer from SAP-support: after debugging found an very old sapxmltoolkit.jar in the java-bootstrap folder
moving the ticket to SUM-support - java-developm-support.
2014-07-09 at 08:36 CET:
14.answer from SAP-support: (SUM-support - java-developm-support) asking for attaching the SUM stack-xml file to the ticket.
2014-07-09 at 14:32 CET:
16.answer from SAP-support: asking to remove the sapxmltoolkit.jar from the java-bootstrap folder and restart SUM (repeat last step)
2014-07-09 at 15:00 CET:
i am happy to get the solution to this issue,
after removing the .jar file from java-bootstrap folder, SUM restart last step,
the SUM-phase execution continues to run, java-server could start, ....
.... finally SUM ended successfully.
==================================
remarks:
formerly, we did a copy of that mentioned sapxmltoolkit.jar to the java-bootstrap folder (in March 2013) because of investigation PI-processes
after upgrading from NW-7.00 to NW-7.31, to get PI-system running after upgrade to NW-7.31
but maybe that formerly issues were caused by other things, cache or so ...
and since then (March 2013) we could start/stop that PI-system several times without any problem, only SUM-upgrade could not ......
i really understand that investigating problems in SAP-software (e.g. SUM-process, java-startup ...) is not easy and could have many causes.
but in summary this SUM-downtime was really large (55 days of downtime) , because of sandbox-system we want to investigate this time,
to get the solution to this issue.
if some SAP people want to look for speed-up options in the whole support-process, the OSS_ticket-no is: ( 459757 / 2014 )
Thanks to SAP-support (for the helpful solution)
Christoph

SAP JVM update to latest version in NW 7.31 Java only stack

Hi ALL,
Can I know what is the procedure involved updating JVM? As there is no JSPM in 7.31 what are the options to update?
I tried by extracting SAR file and changing version in parameter file but it wasn't successful. After changing to latest version Java stack has not started.
Are there any dependencies in updating JVM?
We have a portal system with different version of JVM, Does this has anything to do?
I would like to update from SAP JVM 6.1_35 to JVM 6.1_63.
Please help
Thanks,
Dheeraj

HI Dheeraj,
Please check the below information.
The below url provide step by step for updatint JVM
https://help.sap.com/saphelp_nwpi71/helpdata/en/06/2dc545743a4f98950eec3f33ee4027/content.htm
http://help.sap.com/saphelp_nw73/helpdata/en/06/2dc545743a4f98950eec3f33ee4027/content.htm?frameset=/en/f0/cec51dabd1461b87e4db9e3958710e/frameset.htm
http://scn.sap.com/docs/DOC-33488
Note :
Note 1133020 - How to import a SAP JVM patch into an AS Java
Hope it helps.
Reagrds,
Deepanshu Sharma

NWDS NW 7.0 EHP2 with SAP JVM 4.1 == server0 crash exit code 666

I recently installed developer workplace on windows 2003 server SP2, database MS SQL 2005.
NWDS NW 7.0 EHP2. The installation has been done with SUN JAVA kit. The installed SAP AS JAVA was running OK.
Several SAP notes indicate that from NW 7.0 customers should switch to SAP JVM. I have switches from SUN to SAP JVM using the switch tool. From that moment on, me server0 keeps on restarting (19 restart) before it finally stops with exit code 666. The log shows out-of-memory. I have checked note 1522200 and 1603093 (and some others)
Who can help? Has someone this version running in win 2003? I would like to compare the JVM parameters in that case.

We found a solution. We installed SP02 of NW 7.0 EHP2 from DVD. After upgrading to SP08 with JSPM the problems were gone. Parameter settings in the switch tool (according to the mentioned sap notes) are correct.
Wilbert Karremans

SAP JVM switch SAPINST GUI not launching

Hi All,
I have performed SAP JVM switch in all portal servers. One of the server is giving issue. I is not launching sapinst GUI screen. There was 2 JDK versions installed j2sdk1.4.2_13 and j2sdk1.4.2_29. I keep tried changing j2sdk1.4.2_29 in some properties file besides java home is pointing to j2sdk1.4.2_29. I also changed SAPINST_JRE_HOME property in environment variables with j2sdk1.4.2_29 to be in sync. Now below log is showing j2sdk1.4.2_29 but it is still not launching sapinst gui. Please help. System: Portal 7.0.
Program starter log:
Program is starting... Please wait!
SAPinst build information:
Version:       2014.09.0
Build:         1521363
Compile time: Okt 05 2014 - 16:33:50
Make type:     optU
Codeline:      720-2_REL
Platform:      NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\WINDOWS\TEMP\1\sapinst_exe.6052.1416864069
guiengine: 2014-11-24 16:21:19 Waiting for client connection (1)
SDT start mode [Java: C:\j2sdk1.4.2_29-x64\bin||Home: C:\Documents and Settings\epdadm||Cd: E:\Workarea\SAP_JVM] => /default/
Starting GUIServer using:
SAPinst port         : pipe:480:456
GUIServer port       : 21212
GUI autostart        : on
GUI mode             : normal
Curdir               : E:\Workarea\SAP_JVM
command       : C:\j2sdk1.4.2_29-x64\bin\java.exe -cp "C:\WINDOWS\TEMP\1\sapinst_exe.6052.1416864069\jar\instgui.jar" -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME SDTServer "rootdir=C:\Documents and Settings\epdadm\.sdtgui" config=jar:sdtserver.xml guiport=21212 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:480:456
CurrentDirectory: E:\Workarea\SAP_JVM.
Thanks,
Kavitha Rajan.

very true Reagan.
Kavitha, you just need to make sure that the instance profile has the right details.
    SAPJVM_VERSION. Enter the new version of the SAP JVM e.g.:
    SAPJVM_VERSION = 4.1.028
    and
    jstartup/vm/home = <location of the new jdk>
    for example:
    jstartup/vm/home = /usr/sap/<SID>/SYS/exe/jvm/hpia64/
                       sapjvm_6.1.028
After the change, delete following files (they will be recreated after the j2ee restart):
/usr/sap/<SID>/<INSTANCE>/j2ee/cluster/instance.properties.vmprop
/usr/sap/<SID>/<INSTANCE>/SDM/program/config/sdm_jstartup.properties.vmprop
Now do a complete cluster restart.
Regards,
Hemanth

The Java startup framework must be updated - SAP JVM 4

Dear All,
While execution of switch from JDK to SAP JVM 4.1 on java instance we get the message "The Java startup framework must be updated in order to use SAP JVM 4"
Please help or guide for further steps
Regards,
Ajay

Hi Ajay,
Hope you are doing good.
If the issue persists, kindly update the kernel to the latest level as this will update the native libraries which the JVM needs. This is the next step in these kind of cases.
The below links will help you if there are any queries with the
kernel update procedure.
If you wish to do a Manual Kernel Upgrade:
<http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8>
Kernel upgrade using JSPM:
<http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11219>
and
SAP Note No. 19466: Downloading SAP kernel patches
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Send/Receive IDOCs (XML) from/to SAP R/3 with XI-SOAP without XI!

Dear SAP specialists,
(BACKGROUND) We are using the Microsoft BizTalk Adapter for SAP 1.0, developed on top of the SAP DCOM Connector (we are using the version 6.20 Patch Nr. 177), with Microsoft BizTalk Server 2002 SP1 in order to send and receive IDOC via the tRFC transport protocol. We are using the Microsoft BizTalk Adapter for SAP 1.0 since February 2002, and today we are exchanging more than 25,000 IDOC/day with this architecture.
When we migrate our SAP R/3 system to the version 4.7 with WAS 6.20, I was very enthusiastic about the possibility of sending the IDOC in XML via the standard HTTP transport protocol, because it would considerably simplify my architecture, i.e. no need of any (expensive) adapter any more! But, I had to realise that the quality of service exactly once will not be there anymore with HTTP as it exists with tRFC. Then, we carry on using the tRFC transport protocol with the adapter.
(QUESTION) But recently, I followed the SAP Course TBIT40 XI Foundations and I learn that:
1. On one hand, the XI-SOAP protocol supports the quality of service exactly once by the usage of a message GUID within the XI-SOAP envelope;
2. On the other hand, all mySAP solutions using WAS 6.20 (or higher) carry a small Integration Engine (with XI-SOAP as the native transport protocol).
Then, my question is: << Is it possible to exchange IDOC (XML) directly with an SAP R/3 4.7 (WAS 6.20) via the XI-SOAP transport protocol using the small Integration Engine embedded into it, with the quality of service exactly once? >>
Many thanks in advance and best regards,
Patrice Krakow

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

Authorization Error while extracting data after applying SAP upgrade patch

Hello All,
Recently we have updated the SAP BW patch to 24 and ECC patch to 22. I have the access to perform extraction in RSA3 tcode in ECC.
However, While performing the data load in BW, the process is failing at the Infopackage step with the following error:
"You do not have authorization to extract from Datasource XXXX, Component FI-IO. Message no. R8073"
My basis guy has given the necessary acces.. but still the issue persists..
Please provide solutions ASAP... its very critical issue...
Regards
Sneha

Hi,
Are you loading the data with your username? it may cause problem sometimes because you may not have the authorization object S_RO_OSOA assigned in your roles.
Try scheduling the loading job with the background user with which normally the process chains are run.
i guess this should solve your problem, if not try adding this authorization object to the corresponding role and you can run with your user name itself.
I am not sure about the auth objt , try and see.
regards,
karthik.

MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Structural Changes in SAP Bundle Patches New!
As of June 2014, there is a change in the internal structure of the SAP Bundle Patches (SBPs) for Oracle. While this has many benefits, applying the new SBP for the first time requires special handling. For more information, see the hot news SAP Note 2011199.
When looking at note 2011199 I found due to the changed structure and to identify stand alone patches it is recommended to run the bpmig.sh script.
To avoid these problems or to detect them before actually installing this SBP, you must run the bundle patch migration script bpmig which is delivered with MOPatch 2.1.16 and later.
The script comes up with an error message:
Cannot determine SBP version from "SAP Bundle Patch 11.2.0.3.2 - 201205".
opatch / mopatch semselfs seems to function properly...
Any clues?

Hi,
Please check the following SAP Note 2032109 - Executing bpmig.sh shows "Cannot determine installed SBP"
Thanks.
http://service.sap.com/sap/support/notes/2032109

Replace the JCE Unlimited Strength Jurisdiction Policy files - SAP JVM 5

Hi Experts,
I had a NetWeaver 7.1 system with SAP JVM 5. I tried to run a cryptography software on the system, but the current JCE Unlimited Strength Jurisdiction Policy files of the JVM limited encryption algorithms and key lengths.
I downloaded the jce_policy-1_5_0.zip file from the Sun website, unzipped it, replaced the old policy files (sapjvm_5/jre/lib/security/local_policy.jar and sapjvm_5/jre/lib/security/US_export_policy.jar) with the new ones, then restarted the server. But, after the server was restarted, the new policy files were deleted and the old ones were restored.
Could you tell me what should I do to apply the new policy files?
Thanks in advance.
Victor

Issue Resolved..with help of OSS note :739043
EP 6.0 SP15.... I had same issue for Portal prodution:
I had copied new files (local_policy.jar and US_export_policy.jar) in directory /opt/java1.4/jre/lib/security
Jun 16 2003 local_policy.jar
-rw-rr   1 root       sys           4355 Jun 16 2003 US_export_policy.jar
-rw-rr   1 root       sys           2910 Aug 2 2007 local_policy.1.jar
-rw-rr   1 root       sys           2429 Aug 2 2007 US_export_policy.1.jar
-rrr--   1 bin        bin           2910 Dec 12 10:14 local_policy.2.jar
-rrr--   1 bin        bin           2429 Dec 12 10:14 US_export_policy.2.jar
-rrr--   1 bin        bin           2223 Dec 12 10:25 java.policy
-rrr--   1 bin        bin           6871 Dec 12 10:25 java.security
-rrr--   1 bin        bin          41278 Dec 12 10:25 cacerts
Thanks,
Hari

Migration of JDK 1.4.2_16 to SAP JVM

Dear Techies,
We are trying to migrate JDK 1.4.2_16 to SAP JVM 4 of our solution manager 7.0.
I have Downloaded.Both JVM switch Tool and JVM 4 version
SAPJVMSWITCH00_1-20008223.SAR,
SAPJVM4_1-10009724.SAR.
Iam trying to run the switch tool.
while follwing the steps Iam encountering the error as mentioned below.
An error occurred while processing option Switch JDK to SAP JVM > Switch JDK( Last error reported by the step: System call failed. Error 3 (The system cannot find the path specified. ) in execution of system call 'CreateProcess' with parameter (NULL, Program Files/sapinst_instdir/NW70/SWITCH_JDK, &StartupInfo, &ProcessInfo), line (578) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 146: EJS_ControllerImpl::executeScript()
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 461: EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall() iaxxbprocess.cpp: 407: CIaOsProcess::start_impl() synxcchapp.cpp: 232: CSyChildApplicationImpl::start(false) synxcchapp.cpp: 256: CSyChildApplicationImpl::doStart() .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW70/SWITCH_JDK.
Iam working in win2003 sr2 64 bit environment.
SAP is installed in E:\
Windows in C:\ and D:\ is our cd drive.
Please suggest how to go ahead.
Thanks in advance.
Regards,
Kiran.

Hi,
The system cannot find the path specified
Looks like a required file is missing or not accessible. COuld you check for the last updated log files in the location C:\Program Files/sapinst_instdir/NW70/SWITCH_JDK?
These may give info about the missing file.
Regards,
Srikishan

About license for SAP JVM

My partner in China is look for alternate JVM to replace Oracle JVM in their solution.
They want to know the following thing about SAP JVM.
1.) Can SAP JAVA be opened to the third partner?
2.) Can the third partner can sell their solution ,which embedded with SAP JVM?
3.) Can SAP provide the relevant documents(include performance , interface and license authorized information)?

Hi Kevin,
it is only allowed to use the SAP JVM in combination with SAP Products.
For more information/details you can contact me directly.
Best regards,
Michael

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

CAreer in SAP BASIS comaprision with SAP GRC/Security

Hi Everyone,
I am an SAP BASIS consultant with 2 years of experience working in a MNC company,
I want to change my career to SAP GRC/SAP Security, i have some basic knowledge on SAP Security,
COuld you please advice me, which one to choose,?
Does SAP GRC/Security has demand , and can we get oportunities to work abroad compared to SAP BASIS ?
which one has more scope SAP BASIS or SAP Security/GRC ?
Because in BASIS, i am not getting enough scope to work on some good things like Installation, upgrades, Migration,
i am doing a very basic kind of work like tranports, job scheduling, monitoring, and other small activities ?
So request you people to advice me ?
<removed_by_moderator>
Read the "Rules of Engagement"
regards
Rakesh Rao
Message was edited by: Juan Reyes

Hi Rakesh
I saw your post in GRC and was waiting of it to appear here
First up - 2 years is still junior. You may find batch jobs, transports, monitoring, etc all mundane but it is a foundation and learning ground work and foundations to being a good Basis Administration. And one things for sure, an awesome basic (I name my best-techy-friend) makes a huge difference on project timelines and deliverables for the rest of us.
Installation and Upgrades come with time. Whilst still performing junior tasks you could focus on reading up on approaches in case an opportunity in your job comes us and be prepared to prove to your management that you are ready for a bigger responsibility.
Switching to GRC/Security would be pointless unless you have a desire to learn GRC or Security. These are my background and they are undervalued until things go wrong (insurance policy in a way).
If you do switch you will reset your 2 years of domain experience back to 0 and you will start off with password resets and basic user administration
It takes time to work through the ranks. It was 3 years before I got to build my first role. I spent my first few years in security on email chasing approvals, password resets, user account creation, running reports for audit - sounds familiar to what you are doing now?
You have to master the basics before you are trusted and ready for the more complex activities. By knowing what you are doing now you will be more successful when the time comes to step up and do migrations, upgrades and installations. Support production by mastering you technical analysis skills is how you can break through being a fresher/junior
Regards
Colleen
Ps - if your motivation is more than "good things" happy to answer questions specific to security and GRC.
Also, boring doesn't mean it can't get interesting nor does it mean it's a worthless activity: SPAU transport imported before patching!!
Message was edited by: Colleen Lee
Added link for when transports go bad

SAP Bundle Patches VS Orclaes CPU Patches

Fellow admins
Sorry I am new to these Oracle CPU patches what is the difference between SAP Bundle and Oracle Patches besides Oracle CPU's are for Native ORacle systems and the Bundle patches have fixes related to SAP's interaction with Oracle? Is there any other things I should be concerned with?
Thanks
Mike

Hello Mike,
An SBP contains the following:
    o The current Patch Set Update (PSU).
    o SAP-specific single patches and merge patches that are required but not contained in the PSU.
    o Generic patches that are not contained in the PSU.
    o The current SAP-specific optimizer merge patch.
    o README.html: Installation description for the SBP.
    o bugs_fixed.html: List of patches included.
SBPs are cumulative; that is, the next SBP contains all patches of its predecessor plus the newly-added patches.
You can find further information on note [1137346|https://service.sap.com/sap/support/notes/1137346].
Regards,
Eduardo Rezende

SAP JVM patching with SUM

Similar Messages

Maybe you are looking for