SAP Kernel & brtools & oracle version

請教各位幾個問題,
1. sap ecc ehp4 ready sr1的kernel 是7.01版, 可否升級7.2版的? 另kernel 7.2是什麼產品在用的?
2. brtools目前是7.00版的, 可否升級為7.2版的?
3. sap ecc ehp4 ready sr1版本, 可否直接裝oracle 11.2版(aix , hp-ux, windows...等)?
感謝各位的回答

1. ECC 6 EHP4 只能用701 kernel.
7.2 是用在产品比如: SAP NW ENTERPRISE SEARCH 7.2
2. BR*TOOLS是可以用7.2版本的, 参考SAP Note 12741
3. ECC6 EHP4/NW701是可以用11g的

Similar Messages

SAP kernel vs btools vs oracle version

we have some questions,
1. sap ecc ehp4 ready sr1 version, is use kernel 7.01 version, can i upgrade to 7.2 version?
2. can upgrade brtools version from 7.00 to 7.2 ?
3. sap ecc ehp4 ready sr1 version, can use oracle 11.2 version on aix, windows, hp-ux?
thank you everyboy help?

> i replace brtools 7.2 version on windows, get error "application has failed to start because the application configuration is incorrect......."
Check your windows event log. Most likely you'll see there an error like the one described in
Note 1402510 - Resolving SideBySide Assembly Errors
and hence you need to fix the ATL library by applying the Windows fix:
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus

Missing IDES ECC5 installation disk for SAP Kernel - MaxDB Version

Hi,
Our HQ sent us installation disks for IDES ECC5. We copied them all onto our server and started installation. The system is now informing us that it can't find the SAP kernel information.
I can only assume that we're missing one of the installation disks.
We're desperate to get this installed and it will take another week for our HQ to send through another disk. Does anyone know whether we can download this from somewhere? We have had a look on SAP marketplace but you only seem to be able to download the kernel for Oracle, MSSQL and DB2....no MaxDB.
Additionally, if there is somewhere in Asia we can download this, then that would be better as we are having internet problems when connecting to Europe and the US.
Thanks in advance!
Tristan

Hello Tristan,
This is not the correct forum to post your question.
You was not asked about the database(MAXDB) kernel software.
You need SAP kernel software
-> Review the installation guides at service.sap.com/instguides ->
mySAP Business Suite Applications -> mySAP ERP -> mySAP ERP 2004
-> SAP ECC 5.0 ->
Installation Guides of SAP ECC 5.0 SR1
-> < Please see the steps 'How to Proceed' > ->
-> MySQL MaxDB
< Part I: Planning and Preparation
Part II: Installation and Post-Installation >
-> select the documents for the OS of your server.
And the document from the 'Part I: Planning and Preparation' you will get information that you need the SAP kernel CD & & what is the minimum required version & the reference to the location at the SAP Marketplace to download it, if you don't have the required SAP kernel CD.
< You could download the CD from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER->
SAP NETWEAVER 04 ->
Installation and Upgrade ->
< OS> -> < database > -> CD 'SAP Kernel ... <database><OS>.
SAP kernel software is database, platform, Unicode specific. >
In the 'Part II: Installation and Post-Installation' document you will find the the list of the required DVDs for the SAP system-ABAP installation.
-> Are you running the installation of the the 'Central Instance', 'Dialog Instance' or 'Database instance' ?
For the 'Database instance' Installation you need:
SAP Installation Master DVD
SAP Kernel DVD
RDBMS DVD
SAP Export DVD
-> What CD/DVD do you have for the installation?
< You could download the CDs from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> Entry by Application Group
-> SAP Application Components -> SAP ERP-> SAP ERP 2004 -> Installation and Upgrade -> <OS> ->SAP DB >
You could also order the CD, if you have problems with download from the SAP Marketplace.
Thank you and best regards, Natalia Khlopina
PS: SAP Note 19466 will give you information about download of SAP Kernel Patches.
Message was edited by:
Natalia Khlopina

Oracle versions compatible with SAP

The current Oracle "Critical Update Patch" released Jan 2008 will be the last one released for Oracle version 10.2.0.2 on platforms where 10.2.0.3 is available. I was told that SAP is not compatible with 10.2.0.3.
Can we upgrade to 10.2.0.3 on our SAP databases?
Thank you.

No.
Note 871096 - Oracle Database 10g: Patch sets/patches for 10.2.0:
10.2.0.3 is NOT certified for SAP
Oracle Release 10.2.0.3 has not been certified for use in the SAP environment, and will not be certified in future. This release is not supported by SAP and cannot be used in an SAP environment as a result. You must not install this patch set.
And read
Note 850306 - Oracle Critical Patch Update Program
Markus

Mixed SAP kernel versions on application servers

Hello.
I'm looking for a Note asserting that mixed versions of the sap kernel on application servers of a single installation are not supported.
E.g. the Central Instance has kernel Version 185 and application server 221 ....
Can anybody help me finding an official source?
Thanks a lot.
Dino

Hi,
What is the purpose of a confirmation for such an obvious fact ?
Do you want an official confirmation that you can't run unix executables on a windows server ?
PS : Don't try to dry your cat in the microwave oven ! There is no official OSS note about it !
Regards,
Olivier

SAP Kernel version

Hello,
For Kernel 6.40, there are 2 types available now:
- SAP Kernel 6.40
- SAP Kernel 6.40 EX2
I believe the EX2 type was recently released by SAP.
Now, for Windows, both these types (normal and EX2) are applicable.
We have to perform a Kernel upgrade.
Which one should we use? normal or EX2?
Moreover, whats the difference between the 2 types?
Thanks.

I checked.
It says:
kernel release 640
kernel make variant 640_REL
So, I guess, this is normal version.
Also, I found Note 1058988 - 640_EX2 Kernels
Thanks.

SAP Kernel Version in SAP Component

Hi to everyone
I have a simple question.
When you have an Early Watch Alert report. There is a column about "SAP Components". There is "PI_BASIS", SAP_BASIS, SRM_PLUS.
SAP_ABA, SAP_AP, SRM_SERVER, ST-A/PI, ST-PI.
Which component is referred to SAP Kernel?
Is SAP_BASIS, or which one?
Regards

Hi,
Kernel and components are seperate entities.
SAP kernel is a set of executables which act as interface between the SAP system, operating system and the corresponding database. Overview of SAP Kernel : http://www.easymarketplace.de/sap-programs.php
SAP Components or referred to as SAP Packages are SAP_BASIS, SAP_ABA etc. These contain objects depending on the type of package which can delivered to the customer. The objects can provide business logic and technology details as well.
Objects are usually programs, reports, function modules, classes etc or tables, structures, data elements etc.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/ef/f43220b19b11d596c100a0c94260a5/content.htm
Regards,
Srikishan

Version of sap kernel

Hello
How can i see on our system what we use sap kernel 32-bit or 64-bit?
regards,
Denis

Hi,
Very simple.
Go to the path: c:\usr\sap\<SID>\SYS\exe\uc\NT<XXXX>.
The naming convention itself will tell you as to if the system is 64 bit or 32 bit. If I386 then 32, if it ends with 64 then 64 bit.
Also this location would be having two files SAPEXE and SAPEXEDB file see the exact number of it and then login to service market place and there match these numbers at the required location to find it out.
Using command prompt go to the same location and type disp+work you will see a few informations which will have the required details about the kernel.
regards and reward with good points.

Can SAP Kernel 640 (linked OCI_9.2) run Ora DB 9.2 via instant client 10g ?

Hello,
One of our old system runs a SAP Kernel 640 OCI_920.
DB server runs Oracle 9.2
We would like to backup it with RMAN to take advantage of backup as saveset with disk_copy_cmd = rman_set
So according to OSS 1101530, we should run at least BrTools 7.00 patch 30 or BRTools 7.10 patch 5.
OSS 849483 and 1060539 state that those Br*Tools can be run with a database server Oracle 9.2 if an Oracle instant client 10g is installed on the Database server.
I wonder if it is possible without upgrading the DB Server to oracle 10g
1) Can SAP Kernel 640 (linked OCI_9.2) run Ora DB 9.2 via instant client 10g ?
2) Or should we go to an SAP Kernel 640_EX2 ?
3) If so, shouldn't Oracle server be upgraded to 10g beforehand ?
I will try to get some clue in the product availibility matrix, but if you already have some piece of information about it, please just shoot !
Thx in advance for you time
Edited by: Emmanuel TCHENG on Mar 30, 2010 12:25 PM

Hi,
Check SAP Note 521230 - FAQ: Client software 9i or lower on UNIX
Thanks
Sunny

Not able to increase SAP kernel release 6.40 patch level from 43 to 71

Hi Guru's,
I have to update SAP kernel release 6.40 patch level from 43 to 71 but not able to do.I am running solution manager 3.2 on Oracle 9i and Win-2003 OS.
Please provide the solutions .
I have downloaded kernel patch from Path at Service matket place ---Support Packages and Patches" SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 3.2" Entry by Component" SAP Solution Manager-SAP KERNEL 6.40 32-BIT UNICODE-Windows Server on IA32 32bit-ORACLE-
SAR SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71
I followed following Steps:
1. Copied the patch into a temporary directory on system.
2. Unpacked the downloded SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71 patch .
3. Stoped the SAP System using MMC.
4. Saved the kernel directory by backup or by copying into a separate backup directory. (\usr\sap\<SAPSID>\sys\exe\run)
5. Re-started the server.
After logging again in SAP client 000 on checking found server patch level coming same as previous one .
Its not got updated and due to this in Tcode- SPAM I am getting error message :'The OCS package SAPKITL318 requires a kernel with Release 640 and patch number 71. The kernel you are currently using has a lower version.'.
Help!!!!
Regards
Gaurav

Hi Guru's,
Output for transaction SM51 enclosed below:
Application server gauravpc1_GSM_00
SAP R/3 Kernel information
SAP R/3 Kernel 640_REL
Database Client Library OCI_920_SHARE
created in NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
created on Nov 4 2004 23:42:53
Support Level 0
Kernel Patch number 43
Source ID 0.043
DBSL Patch No. 172
ICU Version 2.6.1 Unicode Version 4.0
libsapu16 Version 2.0023 Nov 4 2004 20:04:27
Supported environment
SAP database version
610 , 620 , 630, 640
Database ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating system
Windows NT 5.0, Windows NT 5.1,Windows NT 5.2
one more thing I have aloso tried to upload Kernel latest patch level 175 using same procedure but that too was not working.
HELP!!!!!!!!!!!!!
Regards

Problems starting SAP NetWeaver AS Trial Version

Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
 shared lib "dw_xml.dll" version 95 successfully loaded
 shared lib "dw_xtc.dll" version 95 successfully loaded
 shared lib "dw_stl.dll" version 95 successfully loaded
 shared lib "dw_gui.dll" version 95 successfully loaded
 shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....

Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
 1.0.0.127.in-addr.arpa
 Record Name . . . . . : 1.0.0.127.in-addr.arpa.
 Record Type . . . . . : 12
 Time To Live . . . . : 600511
 Data Length . . . . . : 4
 Section . . . . . . . : Answer
 PTR Record . . . . . : localhost
 localhost
 Record Name . . . . . : localhost
 Record Type . . . . . : 1
 Time To Live . . . . : 600511
 Data Length . . . . . : 4
 Section . . . . . . . : Answer
 A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
 Host Name . . . . . . . . . . . . : UKCL515803
 Primary Dns Suffix . . . . . . . : drink.brew.beer
 Node Type . . . . . . . . . . . . : Hybrid
 IP Routing Enabled. . . . . . . . : No
 WINS Proxy Enabled. . . . . . . . : No
 DNS Suffix Search List. . . . . . : sn.brew.beer
 brew.beer
 drink.brew.beer
 scottishcourage.com
 scottish-newcastle.co.uk
 ghodom1.scottish-newcastle.co.uk
 heiway.net
 nl.heiway.net
Ethernet adapter Wireless Network Connection:
 Media State . . . . . . . . . . . : Media disconnected
 Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
 Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
 Connection-specific DNS Suffix . : drink.brew.beer
 Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
 Physical Address. . . . . . . . . : 00-26-55-11-C8-04
 Dhcp Enabled. . . . . . . . . . . : Yes
 Autoconfiguration Enabled . . . . : No
 IP Address. . . . . . . . . . . . : 10.10.210.204
 Subnet Mask . . . . . . . . . . . : 255.255.254.0
 Default Gateway . . . . . . . . . : 10.10.210.1
 DHCP Server . . . . . . . . . . . : 10.10.160.167
 DNS Servers . . . . . . . . . . . : 10.10.160.38
 10.10.236.10
 Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
 Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
 Connection-specific DNS Suffix . :
 Description . . . . . . . . . . . : Microsoft Loopback Adapter
 Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
 Dhcp Enabled. . . . . . . . . . . : No
 IP Address. . . . . . . . . . . . : 10.10.0.10
 Subnet Mask . . . . . . . . . . . : 255.255.255.0
 Default Gateway . . . . . . . . . :
Regards
Tushar Kansara

SAP Adaptor for Oracle Installation Help

Hi,
I am newbie, I am looking for help in installing SAP Adaptor for Oracle.
My Idea is to do some RFC calls to fetch data from SAP into Oracle database. I am looking for what is my starting points, what to install and configurations. If you can help me with steps to be followed is really Appreciative. I tried to search in Oracle Forums, I guess I am not able to come up with correct tags. It may be a long explanation and may be people asked this question before. If you give me links to read is good enough.
Following is My platform:
Oracle:
I have Oracle 10G and 11 versions. Right now I have my infrastructer ready for 10G. If I install SAP Adaptor and get things running according to what I need, and tomorrow if I upgrade Oracle to 11 version, What all the things that I Upgrade?
Operating System:
Unix AIX 5.3
SAP:
ECC 6
Thanks In Advance,
Raj Murthy(Bhavaraju)

Hello,
Right now I have my infrastructer ready for 10G. If I install SAP Adaptor and get things running according to what I need, and tomorrow if I upgrade Oracle to 11 version, What all the things that I Upgrade?About all the topics relatives to SAP, you should ask them (to SAP support service) the question. For instance, is Oracle 11.2 certified for SAP ECC6 ? Or would you have to wait for a later release or patch from SAP ?
Only SAP could answer you for their own product and matrix compatibility / certification.
Best regards,
Jean-Valentin

Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik Espinosa

Note clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan

Homogenous System Copy SAP 4.7, Oracle 9.2.0.7

hi
I have SAP 4.7, Oracle 9.2.0.7 system on windows.
I need to perform a system copy of this to QAS System.
I need some dcouments/procedure to do the same.
Since it is a very old version, so i am not able to find any document.
Please assist.

Hi,
1. http://www-03.ibm.com/systems/storage/disk/pdf/DS6K_SYS_CLONING_white_paper_093005.pdf
2. http://service.sap.com/osdbmigration
3. http://service.sap.com/notes -->547314 - FAQ: System Copy procedure
Regards,
Srini Nookala

Which Oracle version required for MDM 5.5 SP05

Hi guys,
I do have MDM 5.5 SP05 but which Oracle version is required or which is strongly recommended by SAP.
I am having Oracle 10g will that work efficently or let me know if any other version is needed or any other patch is needed with this version.
Please do suggest...............

hi Tejas,
have a look at "oracle DBMS" section
of this doc:
https://websmp209.sap-ag.de/~sapidb/011000358700000271882007E
it mentiones that there are some problems with 9.2
but 10g should be ok (from this doc)
for recommended parameters on oracle 10g have a look at
SAP note : 830576 
is that what you're looking for?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

SAP Kernel & brtools & oracle version

Similar Messages

Maybe you are looking for