Sap kernel update not reflected on disp+work

Hi,
I try to update kernel patch for my Dev server on Windows 2003 server from 133 to 185.
This is 1st time i try to do kernel patch on windows server. I want to change the kernel to 185 by follow "How to do a Manual Kernel Upgrade of an SAP Server" - by Hemant Kumar. And other kernel upgrade notes and guide from internet too.
Is there anything else i should do? Update profile or anything? BTW... im not sure if i put the new kernel update on the right folder. This is because, i copy the folder \usr\sap\SID\sys\exe\uc\NTAMD64. Even if put the same thing on \usr\sap\SID\DVEBMGS00\exe\, the same thing will still will occured.
So now, no matter what kernel that i put on. Apps server still run but disp+work and SM51 still not reflected to the new kernel but still show kernel no 133.
Any advice? Thanks in advance.

Hi all,
Thanks for the reply
Currently i tried all the steps above. But for latest one. This is what i did.
-I stop the apps server.
-Copy the original kernel no 133 at \usr\sap\SID\sys\exe\uc\NTAMD64 as a backup.
-Then overwrite the old 133 with the new one. Change their owner, security.
-Restart apps server using the sapMMC and start saposcol services.
I try to run the command disp+work at Drive:\usr\sap\SID\sys\exe\uc\NTAMD64. But it still show 133.
Then i try to check on the RUN folder in C:\usr\sap\SID\sys\exe\ as what Anindya Bose said earlier. The files still not update automatically. So I bring down the apps server again. So i copy the old Run133 as a backup before i overwrite with the new Run185 executeable files. Then start the apps server again.
I still get the kernel no 133 on disp+work command. However I notice that a few files in Drive:\usr\sap\SID\DVEBMGS00\exe\ has been update to a new 185.
I want to confirm. I find out that in Drive:\usr\sap\SID\sys\exe\uc\NTAMD64 files like stopsap, startsap sapstart and many more files is still not update to 185. File version is still 133 even after all of those steps above. Is this the cause of this problem? Any file that i missout to download somewhere? BTW, I update this job only by using the SAPEXEDB_185-20001356.SAR files.
Thank you.

Similar Messages

SAP Kernel update in HP-UX

Dear Friends,
I have upgraded Kernel patch 236 on HP-UX 11iv2 and oracle 10g.
But after upgrade when i m starting SAP it is not giving any error message but when i try to login then it is displaying the error message sapdp00 not reached. and I have read the log and found that
Starting Programs
29.04.2011 12:12:26
ShmDetach
OK
(9568) Starting: local ms.sapDVR_DVEBMGS00 pf=/usr/sap/DVR/SYS/profile/DVR_DVEBM
GS00_jkeccbc
(9569) Starting: local dw.sapDVR_DVEBMGS00 pf=/usr/sap/DVR/SYS/profile/DVR_DVEBM
GS00_jkeccbc
(9570) Starting: local co.sapDVR_DVEBMGS00 pf=/usr/sap/DVR/SYS/profile/DVR_DVEBM
GS00_jkeccbc -F
(9571) Starting: local se.sapDVR_DVEBMGS00 pf=/usr/sap/DVR/SYS/profile/DVR_DVEBM
GS00_jkeccbc -F
(9572) Starting: local ig.sapDVR_DVEBMGS00 -mode=profile pf=/usr/sap/DVR/SYS/pro
file/DVR_DVEBMGS00_jkeccbc
(9515) Waiting for Child Processes to terminate.
(9515) **** 2011/04/29 12:12:36 Child 9569 died due to Signal 11 (core dumped).
(9569) **** 2011/04/29 12:12:36 No RestartProgram command for program 1 ****
Instance on host jkeccbc started
I have deleted core and again started the SAP but problem is same.
Please help me ?
Regards
Ganesh Datt Tiwari

Hi Gedik,
Yes. The output is
jkeccbc:dvradm 21> disp+work
disp+work information
kernel release                700
kernel make variant           700_REL
compiled on                   HP-UX B.11.23 U ia64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Dec 14 2009 20:47:35
update level                  0
patch number                  236
source id                     0.236
supported environment
database (SAP, table SVERS)   700
Regards
Ganesh Datt Tiwari

Kernel Error: ld.so.1: disp+work: fatal: relocation error

Dear gurus,
We got problem in our Production Server since 28 September 2009.
SAP suggested to update kernel as mentioned in note 561459
But when applying patch kernel on:
SAP R/3 4.6B - SunOS 5.6 - Oracle 8.0.4 by latest kernel patch, we got this error when executing disp+work via console:
#disp+work
ld.so.1: disp+work: fatal: relocation error: file disp+work: symbol __1cG__CrunSregister_exit_code6FpG_v_v_:
referenced symbol not found
can someone help us please?
Thanks for your help.
Best Regards,
Edited by: Bobby Gunawan on Oct 2, 2009 3:17 PM
Edited by: Bobby Gunawan on Oct 2, 2009 3:19 PM

> SAP suggested to update kernel as mentioned in note 561459
So which kernel and patchlevel did you install?
> But when applying patch kernel on:
> SAP R/3 4.6B - SunOS 5.6 - Oracle 8.0.4 by latest kernel patch, we got this error when executing disp+work via console:
>
> #disp+work
>
ld.so.1: disp+work: fatal: relocation error: file disp+work: symbol __1cG__CrunSregister_exit_code6FpG_v_v_:
> referenced symbol not found
wow - your system is really ancient
You have the problem that the C-/C++-Runtime for your patch is not high enough (an operating system patch).
Markus

SAP Kernel update

Hi all
I updated my kernel from 160 to 175
When i log into SAP and execute SM51 it still shows 160 as the kernel patch level ????????
The SAR files are correct because i used the same files to update DEV and QA. and the same process.
The serve is not part of a cluster either.
Any ideas ??
Thanx in advance

hmmmmmmmm    i see
what did i do wrong
disp+work
disp+work information
kernel release                700
kernel make variant           700_REL
compiled on                   AIX 2 5 005DD9CD4C00
compiled for                  64 BIT
compilation mode              Non-Unicode
compile time                  May 13 2008 21:10:31
update level                  0
patch number                  160
source id                     0.160
supported environment
database (SAP, table SVERS)   700
operating system
AIX 1 5
AIX 2 5
AIX 3 5
AIX 1 6

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

0material master data - attribute updated - not reflected in all providers

Hello,
An attribute of 0material was populated with data. Previously it was blank.
Since 0material is available in the dso's and cubes, the attributes come in as navigational.
I am a bit confused. The DSO which loads to the cube is not reflecting the 0material new attribute when displaying data. The cube which is loaded from the same DSO is reflecting the change to the 0material.
I did not think that data needed to be deleted and reloaded?
The attribute change run is part of the process chain and should update both dso and cube?
Example;
Cube
Cust 1
material abc
new attribute bingo
net value 100
DSO which feeds above cube
no data when selecting the same criteria above?
However, when extracting only material and new material attribute in the dso, the attribute comes up.
I am not sure if I am being clear. Thanks for any help you can provide.
Lynda

figured out the issue - I went back and saw the dso nav attributes were not selected. Should have noticed it sooner.

Master data updation not reflected in Bex report

Hi,
There is a field "Approver" in a report. It will only show the name of the Approver. And recently the same approver name has been changed in MDM system and now the problem is newly changed name is not reflecting the reporting. It shows the only old name in reporting.
My doubt is, what about already loaded record in BW system. Whether changes will be made for the older data. I mean it is possible to overwrite the approver name stored earlier in BW.
D Raj

Hi
Yes, master is always overwritten.
load the new value to the approver Info object.
in RSA1 -> right click --> activate master data.
Initially when data loaded, records will be Modified version. when you perform activate master data then M versions records will turn to A version.
records with A version are only visible in Report.
If your report is on Aggregates, then you have to perform ACR (attribute change run) to update the same new value in aggregate.
you can use the program RSDDS_AGGREGATES_MAINTAIN.
Regards,
Venkatesh

Holiday not reflecting in Period Work Schedule of employees

Hi friends
I have a serious issue here. I have created a Floating public holiday and assigned to my Holiday calendar which comes on 23rd of May. When I regenerated the Work schedule rule, it is reflecting showing holiday class as 01 and day type as 01. But when I generated Period work schedule for all employees for the month of May, 23rd May is not reflecting as holiday class 01 and day type 01, instead it is showing as work/paid.
Could anyone please help how to resolve this issue.
Regards

Hmm, time evaluation is not a prerequisite for use of substitutions. It is also used in payroll (daily processing) too.
So, if you see you WSR in IT0007 as it is required, then your work schedule is correctly generated. No worries. But when you don't see it in this report then the reason can be substitution or report logic or any other impact (I don't know yet).
Can you check what you see in IT 2051 - it has consolidated view. There you immidiately see any addiotnal time data (attendances, abcenses, substitutions).

Address of the user changed updated into sap but still not reflecting at

address of the user changed updated into sap but still srm shopping has the old
address .
what could be the possible reasons of this bug?

Hi
Which SRM version are you using ? We encountered the Same Issue long time back ->
Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
Please go through the following SAP OSS Notes below, which will definitely help ->
Note 930371 - SRM 5.0: BBPUM01 Check Data
Related Notes
Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
Note 923461 - SRM 5.0: BBPUM01 description for position
Note 885954 - SRM-UME: User synchronization with wrong address data
Note 884067 - BPartner w/o an private address can't change their settings
Do let me know.
Regards
- Atul

Current Workday SAP EXIT variable not aligned with correct work days

Hello,
I am trying to use the Current Workday variable within a report so that the data will only be refreshed when the calendar day is Monday - Friday. Users look at this report every day, but when they get the report on Monday we would like for the date to be restricted to the previous Friday, and then switch back to Monday's date when they view the report on Tuesday. In order to do this we have placed the Current Workday variable from the Calendar Date characteristic with an offset of negative 1, but it is showing Sunday's date when they look at the report on Monday.
My questions are:
-Does this variable use the factory calendar that can define the work days?
-If so, which Factory calendar does it use? I have gone to the Tcode SCAL but I can see there are many different factory calendars and I have no idea which calendar this variable pertains to. I have also transferred the global settings for the factory calendar from the source system, and I see no change within the variable.
-How can I see the program name behind this SAP Exit variable? My thinking is that I could at least look at the code to see if perhaps I can find out the factory calendar ID the variable refers to from there.
Any help on this would be greatly appreciated! Until this is fixed I have to manually adjust this report every Monday and Tuesday morning!! Not ideal.

Hi Kelly,
I am not sure whether this can be done by an SAP Exit variable.
But you may try this using a Customer exit variable by using the Function module DATE_COMPUTE_DAY.
The function module "DATE_COMPUTE_DAY" will return the day by 1 to 7 when you input date.
Monday : System will return value = 1
Tuesday : System will return value = 2
Wednesday : System will return value = 3
Thursday : System will return value = 4
Friday : System will return value = 5
Saturday : System will return value = 6
Sunday : System will return value = 7
So input sy-datum to this FM and find the number of day. If it is Monday, the number will be 1.
If output is 1, then offset date by -3 to that of Friday, else offset by -1 to previous day.
Hope this helps,
Regards,
Hari

SAP Kernel Update Permition

Dears:
When you use the account root to extract the SAP latest kernel in the HP unix, and before or after you cover the old kernel with the new one. If you need to do any property of the kernel files. For exampe, change the file owner to as the following sample.
chown ora<sid> brarchive brbackup brconnect brtools
 chmod 4775 brarchive brbackup brconnect brtools
 chmod 755 brrestore (owner is <sid>adm)
 chmod 755 brrecover (owner is <sid>adm)
 chmod 755 libsbt.* (owner is <sid>adm)
 chmod 755 sapdba (owner is <sid>adm)

Hi Bach,
You are absolutely on the right path, nothing to worry.
Download the kernel from SMP (/swdc). Upload the new kernel to a temp directory on ur app server.
Now,
1. Take a backup of ur existing kernel directory.
2. As user root or <sid>adm replace the old kernel by the new kernel.
3. Check the following guide (Security on UNIX/Linux NW04S) and set the permissions as per pg# 9 of this guide.
https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000485892007E
4. Now only for certain br*tools u will need to change the permission as this is important so that both ora<sid> and <sid>adm can use it to perform DBA activities from DB13. Set it to permissions as mentioned in the SAP Note below.
https://service.sap.com/sap/support/notes/113747
lastly, to answer your quetion no 4775 and 775 is not the same, the 4 helps the s-bit to be switched on and helps to prevent the errors mentioned in the sap note below.
https://service.sap.com/sap/support/notes/651351
Hope, this answers all your queries. Pls award suitably.
- Regards, Dibya

SAP Kernel update with HANA DATABASE

Dear experts,
I am planning to update the kernel with HANA database. It is my first time that I apply a kernel with HANA and for that reason I want to be sure everything is properly planned. I have updated kernel with Oracle databases and my biggest doubt is if I have to do something in the database, what would it be?
I have looking for any note that help me with a step by step but I couldn't find it. In that order I will ask you based on your own experiences.
Current Kernel is 742 PL28, I am planning to update to PL 101.
I appreciate any comments or suggestions,
Best regards,
DanielO

Dear Reagan,
As you told, the kernel was applied and I had no issues. I appreciatte your help.
Best regards,
DanielO

Work flow issue- Changes are not reflected at rum time

Hi,
    I want to change the Work item text for a task in a workfolw.
    When i am executing the worklow after changing the work item text of the required task(this task creates a work item), the change is not reflected. The work item is ceated with the previous text.
   Please tell me how to make change to reflect at the run time.
regards,
Shweta.

Hi ,
the problem may be in refreshing of buffer . Try to synchronize buffer manually using transaction SWU_OBUF.
Regards
Saurabh

Error with disp+work.exe in Cluster

Hi!
I have installed SAP Solution Manager 4.0 on Windows as MS Cluster.
After Kernel Upgrade the central instance (disp+work.exe) does not start and stopped after a while.
Fri Feb 22 16:04:13 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 148, changelist 963918' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_02
Webservice thread started, listening on port 50213
FRTG\sspadm is starting SAP System at 2008/02/22 16:04:53
SAP HA Trace: FindClusterResource: SAP resource not found [sapwinha.cpp, line 334]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_NOT_CLUSTERED [sapwinha.cpp, line 907]
FRTG\sspadm is stopping SAP System at 2008/02/22 16:08:07
Any helpful information will be appreciated.
Thank you
regards

Thom,
Check this thread. Are you using a DB control in your start profile? The solution sounds suspicious but you might give it a try. They may have actually changed something else without informing the author.
Re: central instance error mscs abap unknown
jwise

Changes made to files are not reflecting

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
Pj

HI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks.

Sap kernel update not reflected on disp+work

Similar Messages

Maybe you are looking for