SAP Library ECC 6.0

Dear gurus.
Does any one of you has SAP ECC 6.0 library or any link where I can download the library.
My email id is <REMOVED BY MODERATOR>
Regards
Sreekanth

Hi,
Hi you can't down load.But you can read Library.
You can read the ECC6.0 library in the following link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
Or go to help.sap.com in that ckick SAP ERP and in that click ERP Central component--English.
Regards,
rambhupal
Edited by: Ramabhupala Reddy Konda on Feb 26, 2008 3:40 PM

Similar Messages

Want to configure SAP Library

Hi Experts,
I want to configure SAP Library I had downloaded Library files too, one is of CHM and other one is of HTML. I wanted this file to be available in my SAP Library OFFLINE on server insted of online, so the persone who is not using internet in my LAN can also be able to access those files. So please help me to configure this CHM files.
Regards,
Prashant Chauhan

hi prashanth,
1. Create folder for the installation, e.g. G:\documentation.
2. Start sapinst.exe from the installation master DVD or from ur dump.
3. In SAPinst you have to give the language folder on the Documentation DVD,
e.g. G:\ADM110_62A\Installation Media (DVDs)\SAP ECC 6.04\SAP ECC60
SP14 Documentation\HTMLHELP\EN.
4. Wait some minutes until the installation has finished and close SAPinst.
5. Now you can open the SAP Library by double clicking on <local
folder>\HTMLHELP\<Language>\00000001.chm.
this might help you
thanks and regards,
santosh.

SAP HR 4.7 ext 110 vs SAP HR 4.7 ext 200 vs SAP HR ECC

Dear All,
what are the differences between these below SAP HR releases :
SAP HR 4.7 ext 110 vs SAP HR 4.7 ext 200 vs SAP HR ECC
Especially from the abap point of view (exit,enhancement,badi,interface,etc)
Regards,
Hary

Hi
Check the version releases
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/790e690c-0901-0010-7894-de8b3d91d78e
http://help.sap.com/saphelp_nw04/helpdata/en/94/c65839bec58b27e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/b9623c44696069e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/c1/1253164e665b4fa635af38b66dc166/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f5/a9673e42613f7ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7f2f43d711d1893e0000e8323c4f/frameset.htm
Reward points for useful Answers
Regards
Anji

SAP Ides ECC 6.0 Install: Import ABAP - Package SAPDODS Error - ORA-00903

Experts,
Good Morning!
I'm trying to install SAP IDES ECC 6.0 version on a Windows 2008 R2 Server with Oracle 11g DB (11.2).
System Info: 16GM RAM & 600GB Hdd. Prereqs passed.
I'm getting the following error during the Import ABAP phase (16 of 29) in the sapinst log:
"An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. "
Here's the dump of import_monitor.java.log
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.012)
SAP Java Server VM (build 4.1.012 1.6-b03, Oct 21 2011 14:18:45 - 41_REL - optU - windows amd64 - 6 - bas2:161688 (mixed mode))
Import Monitor jobs: running 1, waiting 1, completed 141, failed 0, total 143.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 141, failed 1, total 143.
Here's the dump of import_monitor.log:
INFO: 2014-07-05 13:42:53
Data codepage 4103 is determined using TOC file 'C:\Target\Export1\DATA\D010TAB.TOC' for package 'D010TAB'.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2014-07-05 13:42:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-05 13:43:21
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-07-05 13:43:21
1 error(s) during processing of packages.
INFO: 2014-07-05 13:43:21
Import Monitor is stopped.
Here's the log of SAPDODS...
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140705134253
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Aug 16 2011 02:26:36
patchinfo (patches.h): (0.098) DB6: correction for R3load PL 91 on HP-UX and SOLARIS (note 1609719)
process id 1488
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/SQLFiles.LST
(SQL) INFO: C:\Target\Export1\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: found C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: Trying to open C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: C:\Target\Export1\DB/ORA/DODS.SQL opened
(DB) ERROR: DDL statement failed
(DROP TABLE "/BI0/APERS_BOD00")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 903 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00903 occurred at SQL stmt (parse error offset=15)
(DB) ERROR: DDL statement failed
( CREATE TABLE [/BI0/APERS_BOD00] ( [TCTUSERNM] nvarchar(000012) NOT NULL , [TCTOBJVERS] nvarchar(000001) NOT NULL , [TCTSYSID] nvarchar(000010) NOT NULL , [TCTQUACT] nvarchar(000001) NOT NULL , [TCTOBJNM] nvarchar(000040) NOT NULL , [TCTTLOGO] nvarchar(000004) NOT NULL , [RECORDMODE] nvarchar(000001) NOT NULL , [TCTTIMSTMP] nvarchar(000014) NOT NULL ) WITH ( DATA_COMPRESSION = PAGE ) )
DbSlExecute: rc = 99
(SQL error 903)
error message returned by DbSl:
ORA-00903: invalid table name
(DB) INFO: disconnected from DB
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140705134254
FYI - A retry does not help. Also tried to search for the error on scn, google but haven't been able to find the right solution.
Can you help?
Regards,
Cobain.

Divyanshu - sorry to ask but can you explain why i need to update r3load and r3trans to resolve this error? Just want to understand why I'm doing a correction so I can learn from the same.
Also, can you clarify the file update process:
For R3load:
a) the r3load used by the command is dated 8/16/2011 (location:C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\...)
b) the r3load i have in my db folder is dated 10/23/2011 (location:C:\Final\Installer\BS7i2011_Installation_Master_\DATA_UNITS\BS2011_IM_WINDOWS_X86_64\ORA\UC\...)
Do i replace (a) with (b)?
For R3trans:
How do I update this file?
- Cobain.

How to import the SAP library into the XI / PI

Dear All
Thank you for your help and support
I am not able to get any help from the Help Menu. I think SAP library is not installed in my system
Is there any way to install the SAP library.. or does anyone has link to download the SAP library and install in my system
Regards
Blue

Can i download the sap xi library to my pc
refer that thread

SAP Library Download. Is it possible...??/

Hi all,
Is it possible that I can download SAP Library from internet and study LSMW from that....???
Please give me some links if its possible. I have internet access at work and I dont have internet access at my home orelse I would use help.sap.com.
Help me!!!!!!
Thanks,
-Ken

You could order it from the SAP shop. But then it would cost you some money.
https://pgwshop.sap-ag.de/scripts/wgate/ww20/!?theme=66&okcode=start&zzkunnr=1040875&selected_area=1&ostore=doku02en&language=en&login=ITS-ww20-01
Regards,
Rich Heilman

Latest Patch Level in Sap HCM ECC 6.0

What is the latest patch level that one should apply for Sap HCM ECC 6.0.?
What are the disadvantges of not updating the patch levels?

Check the navigation path -
goto service.sap.com -> click on SAP Support Portal (on left panel first link) -> You will get the Support portal home page, here the 3rd tab is Software download(click on software download tab) -> On left side of web page you will get Support Packages and Patches as second link -> after clicking on it, you will get link for A-Z index (click on it)-> Now on the right panel you will get the a to Z index, since you are searching for HR, select H -> in the next page select third link HR Country Legal Change Packages -> Now select the component as per the applicability(EA-HR, HR-CEE, SAP-HR).
You can check the following link -
Re: support pack
Disavantage may be that the new feature which has non source changes may not reflect completely and force you to do some manual changes.

SAP HR ECC 6.0 certification materials

Hi HR gurus,
Iam working as ABAP HR consultant more than 3 years, Now i planned for get certification on SAP HR ECC 6.0 by myself.
Please give me some inputs that where can i download certification materials for SAP HR ECC 6.0 .
If somebody already have, please share it.
Thanks in advance.
Regards,
Ranjith
Edited by: Ranjith Karuvadiyil on Jan 4, 2009 12:30 PM

http://www.learnsap.com/config/hcm_certification.doc

SAP ERP ECC 6.0 PM configuration guide

hi friends, i am working in a construction company and our compnay has implmented SAP ERP ECC 6.0. I am in PM module. I want to learn the configuration part. Please suggest me any gud link(ebook) in which i can find the detail configuration guidence about SAP PM module explaining the steps to configure the different parts for PM module including there need and other explantion

Hi,
I could find some data in this link (http://www.toodoc.com/sap-Pm-configuration-pdf.html)
I would suggest you to through the configuration notes under each configuration in SPRO .. for better understanding..
regards
pushpa

Unable to Define SAP Library in SR13

Hi gurus, I have installed ECC6 with EHP3 in windows servers 2003. All the front end users are using Windows XP. So i want to install the HTMLHelpFIle. So i have copied the Sap Library DVD into the server. Then i go to SR 13 and setup the variant. But when i try to access it's say the path was not found. Please Help me through on this. Thank you.
Varian Detail in SR13. Please verify if i entered the variants correctly.
Variant : Sap Library
Platform :win32
Area      :IWBHELP
Path      :
193.169.1.136\Sap_Library\HTMLHELP\EHP3
Default : Enabled
It seems the path is not correct but i dont know how to define a correct path. The sap Library file in copied into C drive.
Program path =     C:\Program Files (x86)\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
SHH version =     7.1.0.5
Command line =     "TYPE=5&SERVER=&PATH=
193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN&SYSTEM=ITD&_CLASS=IWB_STRUCT&_LOIO=&_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=603&IWB_COUNTRY=&IWB_INDUSTRY=SEM-BW&_SCLASS=IWB_STRUCT&FRAME=X"
Info:          --- Default settings from command line ---
Info:          HelpType=HtmlHelpFile
Info:          HtmlHelpFilePath=
193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN
Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program Files (x86)/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program Files (x86)/SAP/FrontEnd/sapgui/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program Files (x86)/SAP/FrontEnd/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program Files (x86)/SAP/FrontEnd/sapdoccd.ini"
Warning:     Could not read any profile
Info:          --- Starting HtmlHelp ---
Info:          CHM file="
193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"
Info:          HTM file=""
Error:          Could not find file "
193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"

Hi Gurus, Thanks for the reply. In my case i cannot configure the HTMLHELPFIle type. I have found a note related to that.The CHM file cannot be open through shared folder for some reason. Since there are users working on the server i dont want to restart or made any changes on the operating system. i decided to install and configure the PlainHTML file type and its works fine.
Note 920997 - Help files (.chm) cannot be opened through Shared Folder
So to resolve the problem i have installed the PlainHTML type and it's working fine.
Thank you.

SAP SD ECC 6.0

Dear guru,
pls forward soft copy of SAP SD ECC 6.0 material to "[email protected]"
Thanks in advance
Regards
Reddy

hi
Re: Differences between ECC 6.0, 4.7 and 4.6
Reward if Useful
Thanx & Regards.
Naren...

Error when I click on Help -- SAP Library

Hi guys,
When I click on Help --> SAP Library or Help --> Application Help or Help --> Glossary
I get an error message as follow:
Error in SAP HTML-HELP (SHH.exe)
Could not find file
"L:\Data\Saphelp\htmlhelp\HELPDATAR347x200
NE\e18e5134\1a06084d\e11000000\9b38f83b\frameset.chm
For details please check the entries in the files SAPDOCCD.LOG in the windows directory.
SO how to solve this problem...
And is there a way to change the path in which the system look to when i click SAP Library from the path shown above (L:\ Data\....) to another path??
Please I need your help
Thanks & Regards

Hi,
Are the html help files installed on the "L:\DATA\..." drive ? and are the help files installed in language "NL" (Dutch) ?
You can control the path where to look for the files in 2 ways (as i remember):
1) by customizing the SAPDOCCD.INI file on your local workstation (if exists). (User specific)
2) by customizing in transaction SR13 within your R/3. (System specific)
But in the SAPDOCCD.LOG file you should be able to see how the location is found, and from where.
Every thing however (including basic trouble shooting) is described in SAP's document "Installing the SAP Library" or something like this....
I hope this helps...
Regards
Rolf

Latest Patch in SAP HR ECC 6.0

Anyone have an idea about the latest patch level in ECC 6.0 version on SAP HR.
in my client its upto 74.
Please give me update.
Regards,
Sankarsan

Hi,
There have been enhancement packages release by SAP in ECC 6.0 and the latest released is EHP 6 for ECC 6.0
for the software component SAP_HR the release is 604 and the level is 42
for the software component EA_HR the release is 605 and the level is 19.
Your BASIS consultant would be of great help in this regard letting you know whats the latest.
I hope i addressed your query.
All the best to you
Regards
RR

Problems for display SAP Library on SAP Menu.

Hi SAP Gurus, I have I problem with SAP Library:
I take the following evaluation path:
Menu SAP - Help - SAP Library
and when a click on this option it appears the following msg:
Error in SAP HTML-Help (SHH.EXE)
Please install /update Microsoft HTML-Help. Using unsopported versions may cause problems in help display. For details please check the entries in the file SAPDOCCD.LOG in hw windows directory.
Can Anybody help me with this issue?
Best Regards to All.

Hi,
Same problem here since we upgraded to Sapgui 7.10.
Any solution?
Thanks,
Jon

SAP MM ECC.6 Certification

Hi SAP GURUS
I am prepararing for SAP MM ECC.6 exams, i bought SAP MM Functionality and Technical Configuration by Martin Murray.
Is the information on the book enough to write SAP MM Certification or i still need SAP MM Manuals.
It's a very good book
Please reply ASAP
Susan

Susan,
Please, look at the following link, it tells you which areas are covered and how much, if you are writing SAP Certified Solution Consultant SCM - Procurement with mySAP ERP 2005 (C_TSCM52_05).
http://www12.sap.com/services/education/certification/certroles/certificationtest.epx?context=%5b%5bC_TSCM52_05%5d%5d%7c
Good luck.

SAP Library ECC 6.0

Similar Messages

Maybe you are looking for