SAP license renewal

Hi,
I have installed Netweaver 2004s trial version, together with Max DB, but have had very little time to use them. Can I renew the license for a further three months when the present license expires next month? Thanking you in advance.
Edited by: mike considine on Jan 7, 2008 3:38 AM

Hi Mike,
You can renew the license from http://service.sap.com/licensekeys
-Pinkle

Similar Messages

SAP NetWeaver 2004s Trial Version License Renewal

Hi,
How many times can I extend my license for SAP NetWeaver 2004s Trial Version?
Also, is there any fee for every license extension?
Thanks in advance,
Haris

Dear Haris,
Currently there's no limit and no fee for license renewals. In the past, license renewal had been stopped for some time though, which made a lot of people in this board very unhappy, but hopefully this won't happen again...
Best wishes,
Jan

Renew Mini sap license

Hello Gurus,
I know this question has to be under download form thread. But I couldn't find it. Sorry for that!!
i have requested sap for renewing my license key for mini sap.
They have provided me with mbs.txt file containing key.
And few system details.
Mini is 4.6 d version of mini sap.
I am not getting how to import the key present in file mbs.txt
Please help with the procedure.
Thanks in advance!!!

Hi, very late reply.. but better late then never.
An alternate solution for Minisap R/3 4.6D version would be to simply install the license using the command prompt.
I actually found it quite simpler than installing it through SLICENSE, as I got "invalid" key error.
Steps are posted here - http://scn.sap.com/message/13231622#13231622
Good Luck to anyone using this method
T.H.

SAP license key error: no valid license found: cannot log into SAP GUI

I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP. Well, later I tried to log in again and was locked out. After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now.
I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error. I put a trace on it and appears it cannot read license file key. I also tried to install another temp license, but that failed since no other previous valid license was found. At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how. SAP has not provided a solution yet.
I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
Has anyone else run into this issue?

Yes, I wish it were that simple, but I cannot even bring up the logon screen. SAP GUI returns a message, resource temporarily unavailable. I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found. I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well.
For NW2004s, is it even possible to install a digital license using cmd prompt?
Ben

Why does BR*Tools return with the error, No Valid SAP license?

We are using BRTools 640 on HPUX and Oracle 9.2 Now we use BRTools on the other systems where Oracle resides, but when they got installed on this new system it creates the error: Invalid SAP license.
There is no SAP installed on any of the systems. I am coming into the middle of this and have sratched my head over it until I am now balder than I was before.
The ora<SID> user is there and so is the <SID>adm. The directories are ok with the correct rights and permissions. So what am I missing? I know it has to be something that I am missing. Any help out there?
Thanks,
David

Hi Ravinder,
No this did not resolve the issue. Here is what happen.
Implemented note 586618 and then completed the semophore part. That worked as is it should. Then tired a simple BRARCHIVE and this is what I got:
BR0002I BRARCHIVE 6.40 (36)
BR0006I Start of offline redo log processing: adsweyuy.svd 2006-06-19 14.30.40
BR0925I Public synonym SAP_SDBAH created successfully for table SAPBIX.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPBIX.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPBIX.MLICHECK
BR0602E No valid SAP license found - please contact SAP
BR0280I BRARCHIVE time stamp: 2006-06-19 14.30.41
BR0301W SQL error -980 at location BraDbLogOpen-5
ORA-00980: synonym translation is no longer valid
BR0324W Insertion of database log header failed
BR0007I End of offline redo log processing: adsweyuy.svd 2006-06-19 14.30.41
BR0280I BRARCHIVE time stamp: 2006-06-19 14.30.41
BR0005I BRARCHIVE terminated with errors
This is somewhat irritating because as you I though and you probably did also, note 584418 should have fixed it.
I have searched the OSS, but to no avail..so if you have any suggestions it would be appreciated. The really weird thing is it works on other systems. I think something is just missing and I am just too blind right now to see it.
Regards,
David E. Dick

Read SAP table data outside of SAP, without a SAP license

Hello all,
I have been asked to allow people within my company to directly access vendor information, but of course they don't want to purchase a SAP license.
Yes, yes, I know that directly reading from SAP tables at the Oracle database level is generally frowned upon.
I can envision creating an external application that presents the user with a screen of searchable fields, uses these fields to create SQL for the oracle tables LFA1, LFB1, ADRC, and ADR6, and returns a report of vendors that match the selection criteria. The report could have drill down capability to give additional detail per vendor This application would be executed with a user that has read only table access to the aforementioned tables.
I just started to use the Oracle tool SQL Developer for a project that has nothing to do with SAP and that gave me the idea I described in the previous paragraph.
Is anyone doing something like this? Or what other methods are being used to allow on demand access to SAP tables, without a SAP license .
We are using SAP Enterprise Edition version 4.7and Basis 620.
Thanks
Bruce

Hello,
You can use an RFC to extract data from SAP.
Depending on the language you can extract data, for example if it is on .NET, you can use the .Net SAP conector, and create a RFC function on SAP, that returns the data you need.
To extract the data you will need a valid SAP user and password.
Hope this helps
Gabriel P.

SAP License key

Dear All,
We have an issue with system number in our production system.
We have generated SAP license key for production during our SAP implimentations. But after that due to some major problem we have again reinstall SAP system and regenerate SAP License key. Now both the SAP License key has different system number. Old one license key we have deleted from SAP Supprt portal.
How can change the system number in my landscap as per the registered with SAP Support portal.
Can I delete existing license from my SAP System and reinstall latest downloded key ?
Thanks in advance,
Nirav

Well you should have ordered the new license under the same system.
Can I delete existing license from my SAP System and reinstall latest downloded key ?
Yes, that is what you have to do now. If your installation number changed, then you will have to delete the old licenses first. Then you will be able to install the new license.
Cheers Michael

Error while importing SAP Router renew Certificate

Hi Gurus,
My sap router certificate got expired and got mail from SAP to renew, so I decided to renew it and followed link http://wiki.sdn.sap.com/wiki/display/Basis/HowtorenewtheSAPRouterlicense to renew saprouter certificate. All the steps were executed fine But I got below error while importing certificate from srcert file.
C:\saprouter>sapgenpse import_own_cert -c srcert -p local.pse
Please enter PIN:
import_own_cert: Installation of certificate failed
ERROR in ssf_install_CA_response: (1280/0x0500) No certficate with your
public key found
Please advise me to solve this issue.
Thanks,
Venkat

Hi Deepak,
thanks for your reply.
yes i have entered correct Pin and in the first step i have moved local.pse and cred_v2, certreq, srcert files to C:/saprouter/backup folder
After executing import command it has given error first time so i copied local.pse file to C:\saprouter folder and executed but same error result.
please help me to solve it.
Thanks,
Venkat

Between SAP Licenses and Employee Records Realtinship

Hi Experts
The Scenario of the issue is as below.
SAP Licenses held by the company is -- numbers.
And the employee records including PD(appraisal),PA & OM exceeds the allowed records numbers.
Qn1 Whats the realtion between SAP license and records ?
Qn2 How to go about in this scenario?
Qn3. Should i prioritise the existance of records in appraisals and delete the least priority after consulting the client?anyway OM & PA records should not be deleted.
Please throw some light on the issue.

Abhilash,
Usually the SAP Licenses are with respect to named users and their rights to the system....
If you have N licences of various types and M employees accessing SAp ( M > N ) then it will be an issue .. usually for services like ESS - you have a licence called employee user and for more access you have professional licenses etc...
You could check the type of licenses that the company has and the number of licenses of each type and also the Contract signed with SAP as to the licensing policy..
Arun
Hope it helps...

SAP License Key configuration procedure in Web AS(J2EE)

Hi,
We installed Web AS 6.4 (J2ee). It is running on temporary license and going to expire in one week time. I applied for license key and got the permanent license key as a text file attachment through email. It is a simple text file containing the license key, system NR and etc. I saved that text file into my machine.
I tried to configure that license file into Web AS using visual administrator.
Server 0 --> Services --> Licensing Adapter --> Install License from file
I selected the text file which was sent by SAP to my mail.
It is giving error like
License file C:\(license file name).txt contains an incorrect SAP license key: Header or empty line expected.
License key(s) not completely installed.
I don't know what to do now. I think we can do through this through cmd. But I don't know how to do that.
Shall I delete the temporary license? Will the system allow me to enter the value manually.
Can any one guide me on this?
Thanks.

Srikishan,
I am getting error lilke this.
D:\usr\sap\SID\SYS\exe\run>saplicense -install
SAPLICENSE (Release 640) ERROR ***
 ERROR: Can not set DbSl trace function
 DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
 RC-INFO: error loading dynamic db-library - check environment for:
 dbms_type = <db-type> (e.g. ora)
 DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Any idea about it?
I set the system variable like
dbms_type = mss
DIR_LIBRARY = D:\usr\sap\SID\SYS\exe\run
But still getting the error.
Do I need to set dbms_type in environment variables? I don't know it's value. My db is MS SQL DB.
Thanks.

Table and views which are afftected during the SAP license post processing

Hi,
can anyone tell me those table and views which are afftected during the SAP license post processing process in SAP 4.7 installation on oracle.
Regards,
Abhishek

hi
there is no table active with the name MLICHECK
the table is not active in the dictionary
what to do now?
i want to see the license data of the sap system now in the table view..............

Error: SAP license key: header or empty line expected

Hello All,
I wanted to install license for my portal server(EP-6, SP-14). But i am getting some error msg
License file C:\APQ_WEBAS.txt contains an incorrect SAP license key: header or empty line expected. License key(s) not completely installed.
when I clicked on install from file Button.
Any +ve will be aprited.

Hi Uttam
Just Put this line at top of ur license file
Begin SAP License -
so the license file should look like this
Begin SAP License -
SAPSYSTEM=XXX
HARDWARE-KEY=XXXXXXXX
INSTNO=XXXXXXXXX
BEGIN=20051224
EXPIRATION=99991231
LKEY=SWPRODUCTNAME=J2EE-Engine_MSS or ORA
SWPRODUCTLIMIT=XXXXXXXX
SYSTEM-NR=000000000XXXXXXXXXX
regards,
kaushal

SAP License but digital signature?

Hello everyone,
I have asked for Sap license and i have recieved a Digital Signature based Sap license.. Anyone got any idea about how to install that license? I have Sap netweaver 7.1 (Demo) aka minisap which i have downloaded from Internet and requested for license and in return i got a digital license based mail but i dont know how to install this so that i can Register the objects.
Cheers
Lastw0nd3r

Dear,
You posted question in wrong forum....close this thread and open a new thread at below link:
SAP NetWeaver Administrator
Thanks,
Neetu

Error when install sap license with 'saplicense -install'

Dear experts,
Error when install sap license with 'saplicense -install':
SAPLICENSE (Release 640) ERROR ***
 ERROR: Can not set DbSl trace function
 DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
 RC-INFO: error loading dynamic db-library - check environment for:
 dbms_type = <db-type> (e.g. ora)
 DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Could you gvie me any ieda?

Another way is to open a command prompt as nspadm and run saplicense -install
To do this follow the steps below
Click "Start" -> "Run..." and enter:
runas /u:nspadm cmd
Enter nspadm's password. A command prompt appears running as user nspadm. Now change to \usr\sap\nsp\SYS\exe\run and run
saplicense -install
Hope this helps.
Regards,
Klause

Use of SAP license mechanism is no longer mandatory

Partner-developed add-ons are no longer required to use the SAP license mechanism. Although the SAP license mechanism is still available to those partners who would like to use it, the use of the mechanism is no longer required. Partners who wish to use their own license mechanism instead of SAPu2019s are welcome to do so. Partners developing any add-on solution are strongly encouraged to apply for a namespace from SAP, which helps prevent conflicts between partner products.

Hello,
I am software developer working for a small company that uses SAP BO 2005A in the finance and sales department.
I recently discovered the SAP SDK installed on our machines (server and PC's), and after some research and looking at people's sample code here, I have successfully written a small Visual Basic application that could create Sales Orders automatically, saving the company time not having to do the manual entry.
Would anyone know if I would be breaking any SAP contract or agreement if I was to run my little application ?
Do I need to be accredited to use the SDK?
Much appreciated.
Ed Roman
Melbourne - Australia

SAP license renewal

Similar Messages

Maybe you are looking for