SAP Login Problem in Newly installed SAP

Hi expert,
host machine---Win7 64 bit
Virtual Machine---RHEL 5.3
i installed ECC 6.0 with oracle 10.2.04.0 on RHEL 5.3 successfully on Virtual Machine.
but i can't login via host machine(win 7).
i checked all the things on RHEL all are ok.
like database is up,
pf -ef show the work process and R3trans -d finished by 0000 RC.
So why i can't login to SAP.
Any thing is missing Please suggest me.
Regards,
Vovek

Hi,
In addition to above checks,
check with your infrastructure support team if outbound 3299/TCP ports are opened in firewall and SAP server IP addresses authentication
which SAPGUI version have you installed?
Regards,

Similar Messages

Online backup with redolog failed on newly installed SAP server

Dear All,
Pls check the below log which was taken newly installed SAP server .
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beflcufp.and 2011-03-14 15.32.17
BR0484I BRBACKUP log file: D:\oracle\IBQ\sapbackup\beflcufp.and
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\IBQ\102\database\initIBQ.ora - default assumed
BR0274W File 'D:\oracle\IBQ\102\database\CTL1IBQ.ORA' not found
BR0280I BRBACKUP time stamp: 2011-03-14 15.32.20
BR0319I Control file copy created: D:\oracle\IBQ\sapbackup\CNTRLIBQ.DBF 12664832
BR0063I 17 of 17 files processed - 26652.203 MB of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:56
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.42
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            D:\oracle\IBQ\oraarch\IBQarch
Archive format                 ARC%S_%R.%T
Oldest online log sequence     308
Next log sequence to archive   311
Current log sequence           311              SCN: 2870470
Database block size            8192             Thread: 1
Current system change number   2870472          ResetId: 745348120
BR0017E Offline redo log file 'D:\oracle\IBQ\102\RDBMS\ARC00310_0745348120.001' not found
BR0056I End of database backup: beflcufp.and 2011-03-14 15.56.43
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110314153206 -d disk -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.44
BR0292I Execution of BRARCHIVE finished with return code 3
Regards

Dear all,
Backup got failed pls check below logs (Note : Kernal also upgraded and ORACLE_SID
ORACLE_HOME also set .
BR0063I 17 of 17 files processed - 26652.203 of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.46
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            D:\oracle\IBQ\oraarch\IBQarch
Archive format                 ARC%S_%R.%T
Oldest online log sequence     312
Next log sequence to archive   315
Current log sequence           315              SCN: 2952702
Database block size            8192             Thread: 1
Current system change number   2952704          ResetId: 745348120
BR0018I Waiting for the next offline redo log file...
BR0202I Saving space_log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\beflmnyz.and
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\backIBQ.log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0056I End of database backup: beflmnyz.and 2011-03-16 15.27.54
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110316151050 -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.57
BR0292I Execution of BRARCHIVE finished with return code 3
BRArchive is not done ,
Kindly advise.

Problem updating newly installed Tiger (upgrading from 10.3.9)

Hi,
I'm having troubles updating my newly installed Tiger (10.4.3) to the newest version of it.
I tried Software Update but after checking it says that I have the newest available software (which is not true), and when trying updating from the combo updates available at Apple website, I get the following screen:
http://kaarlows.sites.uol.com.br/Fotos/update.jpg
I've downloaded all combos, starting from 10.4.8 version until 10.4.4 one (which is the one I took the screenshot above), and all of them show the same error.
I've already restarted the computer, repaired permissions, disconnected my external drives, and still couldn't update my operating system.
I upgraded from Panther, version 10.3.9, using the option of “upgrade” with the Tiger installation DVD.
Could somebody help me out here?
Thanks;
Carlos Alberto Pinto Peixoto Bastos Santos
iBook G4 800 MHz 12” Mac OS X (10.4.3)

Did you run Disk First Aid repair on your boot volume
with Disk First Aid repair via Disk Utility when
booted from the Tiger install disc before proceeding
with the installation and were all external
peripheral devices except for a keyboard and mouse
disconnected during the install?
No, I didn't, and my external USB hard drive was connected to the Mac when I was updating.
If no problems were reported by DFA repair, this
probably won't make any difference but if there were
problems reported that were successfully repaired, it
might.
Beside repairing disk, I also repaired permissions once again, and there were no problems reported.
I restarted the computer, and still software update continued to say that I was up-to-date and the update combos I downloaded all showed the same error message from the screenshot above.
Will I need to reinstall again Tiger? And will the option Archive and Install work even if I'm reinstalling again the same system?
Thanks for the fast reply,
Carlos Alberto Pinto Peixoto Bastos Santos
iBook G4 800 MHz 12” Mac OS X (10.4.3)
iBook G4 800 MHz 12” Mac OS X (10.4.3)

Problems with newly installed RAM

Please help!
At first, my IMac 2008 wouldn't start... It was showing grey screen and beeping 3 times in a row. So I ordered new RAMs (4 GB matching pair) instead of my old 1 GB. After 'playing' with correct positioning for (seemingly) hours nothing was happening at all. Then I put back the old memory in along with 1 new one in the other slot and the computer finally turned on. I went to check if IMac recognized the new memory and it did showing 3 GB of it instead of the 1 GB I originally had. Anyway, it convinced me that the problem is not in the new RAMs I purchased. To make the long story short: my IMac worked for about 15 min. and froze again. I had to turn it off manually. After that I was back to square one. When I put old memory in - I get grey screen with 3 beeps. When I put either one or both new RAMs in - nothing happens. It was my first time swapping the RAMs so I have no idea what I'm doing wrong or if it's me at all. I'd appreciate any help anybody could provide. Thanks in advance!!!

Hi artnsus, I will make this simple for you. I bought 16 gigs of ram from OWC. One stick went bad in a matter of a few days. The grey screen and 3 dong sounds is a a bad stick. The other guy is right, Apple computers are very picky about their ram. I ended up with a kernel panic as well. That's was real fun! Let me say that again. That was not fun! So, here is exactly what OWC emailed me and said I should do after I install ram in my Mac,
Gently clean the memory contacts with a soft pencil eraser and make sure you seat them properly into the slots.
Resetting PRAM and NVRAM (should be done any time you alter the ram configuration)
1. Shut down the computer (should already be off from install)
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until you hear the startup sound ("bong") for the third time.
6. Release the keys.
Let me say this, nowhere in Apple's Instuctions of adding or replacing ram does it say anything like this needs to be done! I don't really get this and to be honest I don't trust buying ram from OWC. Oh, let me also say this. OWC also said that my iMac could take up to 32 gigs of ram while Apple specifies only 16. They say they do testing but they failed my test and honestly I don't see myself doing much business with them again. That's not to say they are to a good company, I just don't think I want to by ram from them again.

Mac Volume and Sound Problem in newly installed Windows

Hi Friends,
I intalled the Windows 8 Developer Edition using Bootcamp 4.0
My Mac Volume/Hard Disk is not displayed in "My Computer". I read it will display the Volume in read-only mode. Can anyone help in making the Volume show on Windows?
The sound is also not working. Any work-around?
Thank you.
Regards,
Ragu

You are familiar with beta testing? Ever?
It is ah, "normal" for audio to not work on Mac running Windows until YOU install an audio driver.
AppleHFS.sys and AppleMNT.sys were buggy with Windows 7 3.0 and 3.1
If you want, see what Paragon HFS 9.5 $19 and ask Paragon-Software about whether you can beta test their HFS driver.
Their CampTune 9.5 was just updated to support Lion.
I would also call Lion 7.1 still in the "early" stage and not fully ready - give it a couple updates like every other OS X release - in the 'final candidate+' stage too. The Boot Camp 4 drivers for Windows are better now than they were in July but still some rough spots and things missing.
And there was a firmware update for the MBP just this week, and that model has been through 3-4 minor chip revisions to the motherboards, some of which deas with support and bugs with SATA 3 affecting SSD support.

Problem with newly installed JDK1.3.1

hello people,
I have just installed JDK1.3.1_01 version.
My O/S is Windows 98 /Nt compatible.
Somehow the permanent path setting instruction of Windows ME worked for me,have succesfully set the path at autoexec.bat file.
I have written my source code ona notepad and saved as: "xyz.java".
Have also disabled "Hide file extension for known files"in Windows explorer.
I typed the following at the command prompt:
c:>javac xyz.java
and got the following error.
error:cant read:xyz.java
why am I gettin this error?
Can anyone pls help?
Thanks
Cozmic.Girl.

Thanks for your help dear.....
It compiles the source file.
I used your suggestion of checking the file name by the CD command.
Dont u think, after the source file having been compiled my xyz.java should have another xyz.class?, for it to be executed?
Theres no xyz.class in the directory.
Anyway I had tried this:
C:\javac -classpath c:\myfolder\xyz.java
I don know what happened to my file at this point,I got another prompt right after this,
C:\java xyz
And a new error!:
Exception in the thread "main"java.lang.NoClassDefFoundError:xyz.
I know tthat was all u could help, but thanks anyways..
bye,
C.g

Unable to install SAP license

Hi,
We have just upgraded our SAP system from 4.6C to ECC6.0 and are now having problem trying to install SAP license.
The hardware key field is greyed out and we are not able to make any entry there and as a result, even if we can "import" the license, it is of no use.
Pls help.

Hi
Basically you can either perform at SAP ABAP level using SLICENSE or it's still possible to install license at OS level also.
If nothing works out, for now (until you find the fix) you even go with temporary license.
Use be link that helps you with whole procedure
http://help.sap.com/saphelp_nw04/helpdata/en/db/4a8338d22aa947e10000009b38f8cf/frameset.htm
Regards
Sekhar

Need to install SAP ECC 6.0 & NW-04s Components

Hi Experts,
I am new to SAP.
I have to install SAP ECC 6.0 ,NW-04s(PI,BI,MI,.......) , so I need to know whether SAP Software will support the below illustrated Hardware or not.
1. Intel Processor Core-2-Duo 6650 2.66 Ghz
2. Mother Board Intel DG33FBC.
3.RAM 4 GB.
I appreciate your answers,and also points will be rewarded.
regards
Ken George

Hi Ken,
From my experience, I did tried to install ECC6 on a server with RAM 2GB but without Java stack. As for NW04s, if you want to install one nw04s technology it is sufficient for the current hardware specification. If you want to install all those software because of you want to learn, could you advice me which path that you want to go?
Thanks and Regards

How to install SAP

Hi,
I just want to know how can I install SAP? What are the required programs to install SAP because I tried to install SAP (MaxDB, SQL Studio and SAP webtools) but i can't open MaxDB I always got an error "Can not create the FileSystemObject from the Microsoft Scripting runtime library (scrrun.dll)" Error 429."
Is it ok to download the programs related to SAP and install it to my PC? If yes, please help me to install it properly. Please give me step-by-step installation and configuration to run it properly.
Please help me I really want to learn how to use and create programs using SAP.
Thank You.
Dexter

Hi,
Please take a look at the links below.It is telling very well how to install nw2004s.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/installationCheatSheetforWindows-MaxDB&refer=aprilsdndevlopmentfeature
Regards.

Sap login programmatically

I didn't use SAP Login form.
Instead of SAP Login form, I made codes to connect to SAP like below sources.
When I run it, it connects to SAP and get some data from SAP successfully.
But, the page makes an error and didn't show the binded data at datagrid.
Can you help me?
The error message is belows.
PS : When I didn't connect with SAP, and bind the datagrid to internal table, it works fine.
=================CODE=================
          private void Button1_Click(object sender, System.EventArgs e)
               // Declare parameters here
               SAPProxy1 proxy = new SAPProxy1();
               this.components = new System.ComponentModel.Container();
               System.Configuration.AppSettingsReader configurationAppSettings = new System.Configuration.AppSettingsReader();
               this.destination1 = new SAP.Connector.Destination(this.components);
               // destination1
               this.destination1.AppServerHost = ((string)(configurationAppSettings.GetValue("destination1.AppServerHost", typeof(string))));
               this.destination1.SystemNumber = ((short)0);
               this.destination1.Username = "RFCB2B";
               this.destination1.Password = "SVCUSA";
               this.destination1.Client = ((short)(160));
               this.destination1.Language = "en";
               try
                    SAP.Connector.SAPLoginProvider.OpenSAPConnection(this, destination1.ConnectionString, false);
                    proxy.Connection = SAP.Connector.SAPLoginProvider.GetSAPConnection(this);
                    // Call methods here
                    string strEsvc_Rfc_Ok = null;
                    ZWEBIF2 zBuffer = new ZWEBIF2();
                    zBuffer.Buffer = this.TextBox1.Text;
                    Input_Data = new ZWEBIF2Table();
                    Input_Data.Add(zBuffer);
                    proxy.Z_Web_Rfc_D3("WB_MODEL_SEARCH", "C310", "0001656428", "E", out strEsvc_Rfc_Ok, ref In_31, ref In_33,
                                        ref In_39, ref In_81, ref In_82, ref In_83, ref Input_1000, ref Input_Data, ref Output_1000, ref zwebiF2Table1);
                    Console.Out.Write(zwebiF2Table1.Count);
                    Console.Out.Flush();
                    // Now update Data Bindings. On WinForms this will be automatic, on WebForms call the following line
                    this.DataBind();
               catch(Exception ex)
                    Console.Out.Write(ex.ToString());
                    Console.Out.Flush();
                    // If SAPLoginProvider.GetSAPConnection(this) cannot get a connection, we might get an error. // Normally this can be ignored as it will automatically will force a relogon.
===================ERROR========================
Server Error in '/WebApplication3' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested Url: /WebApplication3/default.aspx
Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032

If you don't want to use a Login page, you shouldn't user SAPLoginProvider.OpenSAPConnection / SAPLoginProvider.GetSAPConnection. This classes to internally some redirect to other pages which causes 404 error.
Instead us Connection.GetConnection() (for NCo 2.0) or just "new SAPConnection().
In NCo 2.0 you can easily reach this by just dragging a Destination from Toolbox or the corresponsing Application Server icon from Server Explorer to your form. The Destination is already configured to take most settings from the Web.config file (see the cyan icons on the properties), so you don't need to write "configurationAppSettings.GetValue" by hand.
In NCo 2.0 you can also drag the SAPProxy1 instance from the toolbox and wire the connection between it and the destination in designer.

How to install SAP 4.7 IDES on PC

Dear Frnds,
Let me introduce myself iam Ravi.i just joined this group and also new to SAP environment.i want to install
SAP 4.7 IDES on my computer. can any body plz help me how to install it on PC or any website or document where i get the information.I have 512 MB Ram and 160GB HDD, P4 2.4 GHZ is it sufficent or still i require furthur updation. Please guide me
[email protected]

hi am shanmugam,
i am not able to install SAP 4.7 , can any one send me the complete step-by -step procedure to install SAP 4.7. it will be a g8 help .
thanks and regards
shanmugam.L
[email protected]

Problem to install SAP R/3 4.6 on Windows server entreprise 2003

Hello all,
I've a problem to install SAP R/3 on a windows enterprise server 2003.
This is the step I made :
1) Install Windows enterprise server 2003
2) Add IPX and Netbios to the network (adress ip 192.168.10.2)
3) Add 192.168.10.2 srv1 SAPTRANHOST to the hosts file
4) Create User - C11adm; Assign administrator privileges
5) Start Update DLL's from Kernal CD.
6) Login as c11adm and Install Oracle 9.2 with the options :
File locations :
Source :
      Path : no change the path
Destination :
      Name : C1192
      Path : C:\oracle\C11\92
Available Products :
      Oracle9i Database 9.2.0.1.0
Installation type :
      Enterprise Edition
Database configuration :
      General Purpose
Oracle service for Microsoft Transaction server
      Port number : 2030
Database Identification :
      Global database name : srv1
      SID : srv1
Database File location :
      c:\oracle\oradata
Database charactere set :
      Use the default charactere set
7) Stop all oracle services
8) Install oracle 9.2.0.4.1 patch :
    OUI - V 2.2.0.18.0
    Oracle 9iR2 patch set 9.2.0.4.0
9) Install SAP R/3 disc 4.6D EXT Kernel
    INSTGUI options:
    Sap system name : C11
    Install Directory : C:\USERS\C11ADM\Install
    Sap Release to install : R/3 4.6C SR2
Error : CDINSTEXTRACTSAPMMCMSC_NT_IND InstallationDo 2342
Does somebody could help me ?
Regards.
4. Give all users access to ora_dba
5. Restart, login as c11adm and continue installation.

Hello Peter,
For the note 578004 Sap said :
            a) Copy the content of the respective Kernel CD to a local empty working directory.
                       For example, for a 4.6C SR2 system you use the 4.6C SR2 Kernel CD, for APO 3.0A you use the Kernel CD for APO 3.0A, etc.
But for myself, i don"t understand what they said because I Want to install 4.6c and they said "use the 4.6c SR2 Kernel CD" but where I can find this CD because I downloaded the files below :
50045631_1     Online Docu 4.6C Disc 1 HTML Help Windows 9x/NT German
50045631_2     Online Docu 4.6C Disc 2 Standard HTML German
50045631_3     Online Docu 4.6C Disc 1 English HTML Help for Windows 9x/NT
50045631_4     Online Docu 4.6C Disc 2 English Standard HTML
50046529     R/3 4.6C SR2 Installation Documentation
50056848_1     DVD 4.6C Online Documentation (3) 1 of 11
50056848_10     DVD 4.6C Online Documentation (3) 10 of 11
50056848_11     DVD 4.6C Online Documentation (3) 11 of 11
50056848_2     DVD 4.6C Online Documentation (3) 2 of 11
50056848_3     DVD 4.6C Online Documentation (3) 3 of 11
50056848_4     DVD 4.6C Online Documentation (3) 4 of 11
50056848_5     DVD 4.6C Online Documentation (3) 5 of 11
50056848_6     DVD 4.6C Online Documentation (3) 6 of 11
50056848_7     DVD 4.6C Online Documentation (3) 7 of 11
50056848_8     DVD 4.6C Online Documentation (3) 8 of 11
50056848_9     DVD 4.6C Online Documentation (3) 9 of 11
50078731_1     NW 2004s SR1 Presentation - Adobe LiveCycle Designer 7.0
50078731_2     NW 2004s SR1 Presentation - SAP Content Server 6.40
50078731_3     NW 2004s SR1 Presentation - MaxDB Release 7.6.00
50078731_4     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 1/3
50078731_5     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 2/3
50078731_6     NW 2004s SR1 Presentation - 6.40 Compilation 5 Present. 3/3
50078731_7     NW 2004s SR1 Presentation - Server Components Compilation 5
50081125     CD SAP License Keys & License Audit
51013953_1     R/3 4.6C SR 2 Export CD 1
51013953_2     R/3 4.6C SR 2 Export CD 2
51013953_3     R/3 4.6C SR 2 Export CD 3
51013953_4     R/3 4.6C SR 2 Export CD 4
51013954_1     R/3 4.6C SR 2 Language CD 1
51013954_2     R/3 4.6C SR 2 Language CD 2
51013954_3     R/3 4.6C SR 2 Language CD 3
51013955     R/3 4.6C SR 2 Language JA
51013957     CD 4.6C SR2 Language TH
51013998     R/3 4.6C SR 2 Language ZF
51018621     CD mySAP.com 4.6C Language Romanian
51019432     CD Oracle9i Database Onl. Docu. 9.2
51019883     CD 4.6D SAP Kernel ORACLE NT/IA64
51020564     CD 4.6D EXT Kernel ORACLE NT,AIX,HP-UX
51030122_1     Oracle 9.2 NT 1/3
51030122_2     Oracle 9.2 NT 2/3
51030122_3     Oracle 9.2 NT 3/3
51030122_4     Oracle 9.2.0.4.1 NT
51030122_5     Oracle Failsafe 3.3.2 NT/Intel
51030123_1     Oracle 9.2 NT/IA64 1/2
51030123_2     Oracle 9.2 NT/IA64 2/2
51030123_3     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_4     DVD ORACLE RDBMS 9.2 NT/IA64
51030123_5     Oracle Failsafe 3.3.2 NT/IA64
51031095_1     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 1 von 12
51031095_10     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 10 von 12
51031095_11     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 11 von 12
51031095_12     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 12 von 12
51031095_2     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 2 von 12
51031095_3     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 3 von 12
51031095_4     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 4 von 12
51031095_5     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 5 von 12
51031095_6     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 6 von 12
51031095_7     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 7 von 12
51031095_8     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 8 von 12
51031095_9     DVD Supp.Pack.Coll. 4.6C-47x200 2005/06 9 von 12
51031592     CD SAP R/3 4.6C SR2 Language KO
51031593     CD SAP R/3 4.6C SR2 Language ZH
51031614_1     Oracle 9.2 Patch Set 7 AIX 64 64Bit
51031614_2     Oracle 9.2 Patch Set 7 Tru64 64Bit
51031614_3     Oracle 9.2 Patch Set 7 HP-UX PA-RISC 64Bit
51031614_4     Oracle 9.2 Patch Set 7 Linux I386 32Bit
51031614_5     Oracle 9.2 Patch Set 7 WIN I386 32Bit
51031614_6     Oracle 9.2 Patch Set 7 WIN IA64 64Bit
51031614_7     Oracle 9.2 Patch Set 7 Solaris 64Bit
51032345     Supp.Pack.Coll. 4.6C-47x200 2006/12
Regards.

Problem with all ready installed SAP R/3 4.7

Hi expert,
well i need ur help.
i have installed SAP R/3 4.7 in my laptop for learning purpose it was working perfectly but few days ago there was some problem with my booting files. i have installed Windows server on C drive sap data on D drive and Windows XP on F drive. now due to booting problem by mistake my EDP guy has installed xp on C drive without effecting to partition and he found all sap data safe.
now what is the solution to again start SAP?? like do i need to again install SAP after formatting the laptop?? or i can start it by only reinstalling the Windows server?? kindly help me out i am in big trouble..
looking for your help.
Irfan.
09228466129
Edited by: Irfan Shersia on Mar 31, 2008 2:59 PM

hi guys,
well i m wondering but i have got solution form one system administrator...!! he has simply copy some file from his PC and past in laptop with the help of one software, hardly it takes two minutes and my Windows server & SAP application works perfectly....!!!!!
still thanks to help.
Irfan.

Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp

Hi
when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
Any inputs are welcome

Hello Bala,
Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
Regards,
Vishwas.

Login problem with SAP Mobile Infrastructure

Hi
      I have installed SAP WebAS 6.40 SP9 .
i could see SAP Mobile Infrastructure if i use the following URL -
http://<localhost>:50000/me/WebConsole/login
but i am not able to login with any of the SAP WebAS logins it is giving a error.
      I have also installed SAP GUI for windows to which i am able to login using DDIC login of SAP WebAS.
      It will be helpfull if any one can tell me how to check if the entries in the SAP MI login page are correct like the System ,client,system number,language,user and the password.
Thanks and Regards
gopi

Hi Gopi!
To install MI Client on a Desktop PC,look for the setup.exe file in MI folder in the "Netweaver Components" installation DVD,run one of these setup files based on the framework you need(MOBILEENGINE_JSP or MOBILEENGINE_AWT).
<...\MI\MI2.5_SP09\JSP\win32\comp\setup.exe>
<...\MI\MI2.5_SP09\AWT\win32\comp\setup.exe>
Then run MobileEngine.Exe(After installation you will have a shortcut on your desktop),Create a New User to LogOn and then "Goto>>>Settings" and set up the connection parameters to logon.
Refer to the Installation Guide using the link from Jill Elliot.
I donot understand what do you mean by "setting changes after installing the SAP WebAS 6.40 SP 09?"
Thx
Gisk
Message was edited by: Gisk

SAP Login Problem in Newly installed SAP

Similar Messages

Maybe you are looking for