SAP LOGO to delete from the screen

Hi,
Who knows how to remove the LOGO of SAP and to put the buttons at the end of the html screen generated ?
At every modification of the SAP screen by SE51, how to got the new version in ITS mobile ? What should we generate again ?
Thanks.

Hello,
It is not clear what your question is regarding.  Are you using the ITS Mobile service or the Webgui?  In the Webgui I would suggest that you do not try to remove the SAP logo, though depending on the version the logo should no longer exist.  In the ITS Mobile the logo is very small already and the buttons are already in the upper right corner.  Please clarify what service you are using or if you are doing a custom development and what you currently see and what you would like to change.  Thank you.
Edgar

Similar Messages

  • My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

    My iPad 2 only keeps a set number of emails for me to view eventually deleting from the screen. How do stop this as it syncs with my phone and mac book pro neither of which do this?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

    I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

    I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

  • When I delete a iMessage from a conversation, does it get deleted from the recipients screen as well ?

    When I delete a iMessage from a conversation, does it get deleted from the recipients screen as well ?

    AppleMan001 wrote:
    Please note this is an old thread.
    I think that if they did this it could cause legal issues, such as offensive messages being deleted from the recipient before they have a chance to report the sender.
    Yes, it's an old one, but I started to send texts to the wrong recipients recently, and the problem is still up to date !
    Of course, I agree with you : there must be a legal justification.
    But, just for the discussion, I mean, when someone insists and really wants you to know he hates you, you can mute him or even report him, make screen captures…
    We are all responsible for what we say and do, but that doesn't mean we should have the ability to delete our mistakes. It's not like you can delete emails or phone calls or even physical mail.
    Very often, and that's actually why I searched this thread, I send a message to someone else than the one I thought. That's life, I mean, this is not just about agressive people. I would appreciate to be able to recover my mistake, and to not bother the wrong recipient, cancel the message. Plus, it can be something confidential.
    What is the meaning of a mistake if we don't have the chance to recover it ?
    Even the law, includes this aspect : « Is it the first, second or third time he did this ? » — I don't know in the US, but in France it's the case (and we use same iPhones).
    This is one of the radical aspects of Apple I dislike, and on this point particularly, I disagree with you, because, I think, a mistake should be recoverable.
    If, for example, I send a very rude text to someone, and then realize it was too much, I want to be able to delete it, because I changed my mind.
    But if I consider it normal (maybe I should not) then the recipient will still be able to report me.
    That's my opinion, and just wanted to share it. A mistake should be recoverable.
    Hope my english is not too bad,
    Best regards,
    Francois

  • After updating my iphone 5 of ios 7, I delete or trash my emails rorm my inbox and they pop back up in my inbox.  How do I fix this?  They are deleted from the main server but show up in my email on my phone and will not stay deleted.

    I recently updated my iphone 5 to IOS 7 and since doing this, i cannot get my email messages to stay deleted when I trash them.  They have been deleted from the main mail server but show up on my phone.  When I trash them, they disappear for a few seconds and then re-appear in the inbox. I tried deleted my mail account from my phone and re-adding it, but this worked for about 12 hours and now its doing it again. I also have shut my phone off and rebooted it but this did not work.  How do I fix this?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
    to setup a comcast imap account on your iphone:
    go to mail, contacts, etc in settings
    under accts, select add account
    select "other"
    new screen, choose "add mail account"
    now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
    hit next
    then the acct verifies
    when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
    select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
    then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone.  The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

  • I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • 'Some images are missing because they were deleted from the document'

    Hi,
    I created a document in Pages v5.2 last week and have just opened it and received the following message:
    'Some images are missing because they were deleted from the document'
    When I try and replace the missing images I get the following message:
    'The image "filename" couldn't be inserted.'
    When I try and reimport the original image I get the following message:
    'The image "filename" couldn't be inserted. This image is of an unsupported type.'
    If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
    If I insert the original image into a blank Pages document it goes in no problem.
    I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
    Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
    Alex

    I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
    The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
    I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
    Toolbar > Media insert
    Insert > Choose jpg into document
    Text Box image fill
    Shape image fill

  • Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

    Hello ,
    The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's  at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
    We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
    Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
    Thanks in advance.
    Best Regards
    Sateesh

    Dear Sateesh
    Check this link where the same topic was discussed
    [ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
    thanks
    G. Lakshmipathi

  • File not deleted from the folder

    Hi All,
    Im executing file to idoc scenario.
    my file processing mode is "delete" . But the file is not getting deleted from the folder but im getting success message in moni..
    other communication channels which are using the same ftp parameters are executing fine ( i.e files are getting deleted and success msg in moni ).
    the following is the error msg that i found in communication channel monitoring ...
    Failed to delete file 'IF416AQ1n.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor.
    please help me in this issue..
    deepu.

    Hi all,
    Thanks for your replies..
    Im using a file of size 230744 bytes of type dat.
    time out: 600
    poll interval: 300
    retry interval : 120
    i communication chanell monitering i can see the following message ..
    Failed to delete file 'IF416AQ1.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor
    file is not getting deleted.. what are the changes that i need to make ???

  • I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

    I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

    I experienced this issue as well.
    Background:
    I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
    Solution (summary):
    Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
    Solution (detailed steps):
    Create a new calendar
    On your phone, open the calendar app
    Tap the "Calendars" option at the bottom of the screen
    Tap the "Edit" button in the top left corner
    Scroll to the bottom of the list and tap the "Add Calendar..." option
    Give your new calendar a good name, such as "Delete me"
    Tap "Done" in the top right corner to save the new calendar
    Tap "Done" in the top left corner to finish editing the list of calendars
    Tap "Done" to exit the list of calendars
    Assign all calendar entries that you wish to delete to the calendar you created in step 1
    Tap a calendar entry that you wish to delete
    Tap the "Edit" button in the top right corner
    Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
    Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
    Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
    Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
    Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
    From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
    Tap the "Edit" button in the top left corner
    Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
    Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
    If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
    Tap "Done" in the top right corner to exit the Edit Calendars screen
    Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
    Rejoice, your pesky repeating calendar events have been deleted
    At this point all of the items that you assigned to the deleted calendar should be gone
    Repeat the steps above for any entries that you missed
    Post another message to this thread if this did not resolve your problem
    minor edit for clarity made by ScottHooley

  • Is there any way to know the T-code from the screen?

    Hi friemds,
    it s a general question. but I found relavant for posting here.
    I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

    Hi,
    Listed here are the various ways you can find the list of transaction codes and their usage:
    Use transaction SE11 - ABAP Dictionary:
    Fill in the Database table name and click the Display button.
    - TSTC   table will contain all the Tcodes and
    - TSTCT table will contain all the Tcodes with Texts.
    Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
    If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
    or
    Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
    or
    Goto transaction SE93
    There are two ways where you can find the list of transaction codes in SE93.
    Method 1:
    You must be familiar with the starting characters strings for each of the R/3 application modules.
    Assuming you know that most Materials Management transaction codes start with MM.
    In the Fields: Transaction code, type in MM* and press the function key F4
    The list of transaction code starting with MM will be displayed.
    Method 2:
    On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
    If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
    I know a particular T Code and can enter and work on it.  How do I know what is the menu path for that T Code?
    Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path. 
    This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
    Reward if Helpful,
    Regards,
    Archit.

  • The Bold, Italic, Underline functions have disappeared from the screen as have the check boxes at the beginning of the intro line

    The bold, italic, underline, color hi-lite and other boxes in that line suddenly disappeared from the screen and that section remains blank. However when writing a new message if I mouse over the area the boxes re-appear but without their previous alliterations. Also the system does not allow me to color hi-lite text and shows all the colors in a very fuzzy format when I mouse over where the hi-lite box used to be. Additionally the check box at the front of the email subject line has also disappeared but, again, if I mouse over & click it will perform a delete or other function. Need help!

    Hi ITBobbyP,
    According to your description, there are two text boxes at the bottom of the tablix and both of them are outside the tablix. When you export the report to excel, the upper text box could not be displayed.
    Microsoft Excel places limitations on exported reports due to the capabilities of Excel and its file formats. The following limitations apply to text boxes and text:
    Text box values that are expressions are not converted to Excel formulas.
    Text boxes are rendered within one Excel cell.
    The text effect "Overline" is not supported in Excel.
    Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
    To troubleshoot the problem, please make sure that the text box meet the limitations. In addition, please validate that visibility of the text box is set to true, it’s better to set CanGrow property of text box to false.
    If the problem remain unresolved, i would appreciate it if you could give us detailed information about the report, I would be appreciated it if you could provide sample data and screenshot of the report. It will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

    hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

    Here you are "the strange draft logos"...

  • I have rented movies on my Ipod that I have watched but canot delete from the list on my Ipod, what should I do to delete these movies.

    I had rented a movie on Itunes after watching the movie it did not delete from the Ipod and still appears on the rentals but can not be watched, I would like to delete it from the list, what should I do?

    Try resetting your iPod by pressing and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, try unsyncing and resyncing your iPod with iTunes.
    B-rock

Maybe you are looking for