SAP LSO Upgrade from version 300 to version 600

Hi experts,
Please explain how you will upgrade LSO to version 600.

The LSO 6.00 documentation can be found under SAP ERP 2005. Further information you can find browsing the following links:
http://service.sap.com/customizing
http://service.sap.com/instguides
Also refer to these SAP notes:
SAP Note No. 877851 - LSO: Activate/deactivate SAP Learning Solution
SAP Note No. 1057572 - Incorrect entry in table T77S0 (HRLSO HRLSO)
954138 -> Release Information for LSOFE 600
830593 -> Installing LSOFE 600
337623 -> Customizing after implementation or upgrade
Please refer to note 830594.
For Further information:
Please review
Difference: SAP Learning Solution - Training and Event Management
All of the settings required for the SAP Learning Solution are contained under SAP Learning Solution in the sections Training Management and Learning Portal and Authoring Environment.
The activities in the sections that follow do not apply to the SAP Learning Solution, but to Training and Event Management.
Requirements
You have already installed the SAP Learning Solution Add-On LSO.

Similar Messages

SAP AFS Upgrade from version 5.0 to 6.4

Hi Experts,
I wanted to know if someone here was familiar with the SAP AFS upgrade from 5.0 to 6.4. I wanted to know how exactly they improved the areas listed below. (obtained from SAP Course). Your help would be greatly appreciated
http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5b%5b|wdedaf||1||de|%5d%5d|
1) Improvements in the areas of planned independent requirements, seasonal concept, value add services, Combined order, productionu2013 warehouse interface
2) Production Planning Basic Data - Enhancements of AFS Bill of Material (AFS BOM), SKU Group Based Routing
3) Manufacturing Execution u2013 Collective Planned Order Conversion, Combined Order Confirmations
4) Batch Determination/Classification for SAP Apparel and Footwear
5) Handling Unit Management for AFS
Thanks,

Hi Ronny,
Thanks for the reply!
These patches you speak of, is it for the types of issues I mentioned in my first post or do they cover the entire AFS functionality? I assume it still requires complex configurations but are there a lot of complications with going from AFS 5.0 to 6.4, compared to a new AFS 6.4 implementation? Specifically with the grids, categories and BOMs?
/Cheers

I need to upgrade from my present operating version of Mac OS X version 10.6.8 to the Snoe Leopard version which I am unable to find the app for. Is this version still offered as an upgrade?

Hello,
I need to upgrade from my present operating version Mac OS X , Version 10.6.8 to the Snow Leopard. However, I am unable to locate this app. Is it still available? Any help would be greatly appreciated.
John

Prior to upgrading to Maverick, you must FIRST make sure your iMac meets all of its system requirements.

How do I upgrade from OS X processor version 10.5.8 to 10.6 or later. Is it worth the upgrade?

how do I upgrade from OS X processor version 10.5.8 to 10.6 or later? Is it worth the upgrade?

I have 5.8 on iMac, but it is not server version, it is a usual OS install. I would say, that the only thing there worth upgrading is adding more memory. You should also keep upgrading Firefox, OpenOffice etc. for comfortable work and avoid memory and resource-hungry or buggy applications (like Safari). I have recently used iMovie to work with video, and I never had problems with image editing there. I can compare to 6.8 on my MacBook - I cannot say there is something I missing on this iMac 5.8 which is present on 6.8.
In general, I am an old mac user, and I had experiences where OS upgrade speed up things, like going from 10.2 to 10.3, but I still recommend to make sure that you will get rid of the bugs while keeping functionality - notoriouse examples are Photoshop 7 that stopped working on new systems, Gimpshop (and underling gimp 2, though some cured it) and even some Finder features.

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion:
iMac7,1
MacBook5,1
MacBookPro3,1
MacBookAir2,1
Macmini3,1
MacPro3,1
Xserve3,1
If your system's compatible, buy it from the Mac App Store. A computer incapable of running Mountain Lion which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by phoning the online Apple Store and ordering a download code for it.
(84155)

How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

Upgrading from 7.5 to version 8: Web and Email Collaboration problem

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Essbase Upgrade from 7x to 11x version

Hi All,
I am working on essbase upgrade from 7.1.0 version to 11x version, Just curious if somebody can help me in my basic question
1) I have read many blog suggesting that to upgrade to 7 to 11, we have to follow two step process i.e 7 to 9 and then to 11. Is it true?
2) If i am installation the 11x on completely a new either windows are linux box, can i just the load the data from 7x version cube to 11x cube?

This has been covered many times, if it is a new install then you could use the migration wizard to connect to your existing environment and migrate, you will need to take data separately.
Or you could just create the apps in the version 11 env, export the data and copy the objects from your 7 environment.
Cheers
John
http://john-goodwin.blogspot.com/

Help for Sap BW upgrade from 3.5 to 7.0

Hi All
Please can anyone help me in sap bi upgrade from 3.5 to 7.0.
Please send me helpful documents and if anybody have already worked into similar projects please send ur email id.
Willl appreciate the quick repsonse with points.
Regards and Thanks
Dheeraj Dua

Hi Dheeraj,
Check this- how to on BW 3.x Upgrade Checklist
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20bw%203.x%20upgrade%20checklist
Please check this link and you will find all Upgrade guides
https://websmp209.sap-ag.de/instguides
Also Check this,
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Hope This Helps.
Regards,
Ravikanth

ZSearch Help: will it remain during upgradation from ECC6 to higher version

Hi,
During upgarde from ECC6 to higher versions, will zserach help be moved to higher version automatically or will it be removed and I have to create ZSearch Help again in the higher version.
What about the ZTable, will it be there in higher version or I need to create it again in the higher version.
Thanks,
Priyanka.

Hello Priyanka
Upgrading your SAP system will <b>not affect</b> your Z-objects <b>directly</b>.
However, if your Z-objects reference (i.e. use) SAP standard objects that are changed (or, rarely, are deleted) during upgrading then you may have to adjust your Z-objects. Therefore, keep your (automatic) test scripts available (e.g. eCATT) and run them immediately after the upgrade has been finished.
Regards
Uwe

Lightroom: upgrade from trial to full version, how to enter license key?

I installed Lightroom from Creative Cloud (CC) trial on Windows 7 Pro, 64-bit. The version is LR 5.6. I do not want CC, so I purchased the full version of LR on DVD. I was going to reinstall LR from the DVD, but see that it is only version 5.2. I have already done a fair amount of work with the trial LR 5.6 and am worried about losing the catalog that I have created.
So I thought I could apply the full version license key to the trial install, but there is no place to do that within LR. When I bring up the CC master application it shows that I have 5 days left with LR, but still has no way to apply a license key.
I had a very long and frustrating chat session with tech support. In the end I was advised to uninstall the trial, then install the full version. I might be able to download LR 5.6 full and simply install that.
So let me summarize my questions:
Is there any way to apply the license key for standalone full version of LR to the trial version that was installed using CC?
If I uninstall trial version, will I be able to install LR 5.6 download and apply license key?
If I cannot install from download and instead have to install from purchased DVD, will version 5.2 be able to import the existing catalog? Will subsequent upgrade(s) to 5.6 go smoothly?
What about the catalog? Will the existing catalog simply be found during a new installation? Or do I have to manually import?
I've found the community help in the LR forum to be very good - and that is why I am abandoning ACDSee after many years Thank you all for your help.

You should just uninstall what you have installed for LR 5.x, now, then download and install the LR 5.6 update from the Adobe Updates page, and enter your standalone serial number, and things should pick up where you left off.
You might want to go into LR’s preferences (if LR is still opening for you) and see where the catalog (.lrcat) file actually resides on your computer in case you have a problem and have to double-click on that .lrcat file to open your catalog, but my experience is that nothing will seem different after you’ve installed the new version other than the version number will be newer. The preferences, catalog, and pictures are somewhere different than where the program is installed so uninstalling and reinstalling shouldn’t affect any of it.
LR 5.6 update is here: http://www.adobe.com/downloads/updates/
FYI, the CC-LR is licensed by logging into CC, the standalone version is licensed by entering a serial number. That is why you have to uninstall the CC_licensed version and install the non-CC-licensed version.
It also probably wouldn’t mess anything up to install LR 5.2 from the DVD, but then you’d have to turn around and immediately download the LR 5.6 update, anyway, and it would waste time, so why not start with the latest update. The update is a fully function program, not a patch to an existing program. It’ll either find your existing licensing information if you’ve already entered the serial number or ask for a serial number if it doesn’t find anything—which sounds like your situation.

Upgrading from educational to commercial versions?

I currently have Adobe Creative Suite 1.0 Education version that I purchased in 2003 when I was still a student. I am upgrading to a new iMac and want to upgrade my CS software to the Intel-friendly CS4 Design Premium. Adobe is running a great deal on upgrades (CS3 upgrade rate from any version of Creative Suite, not just CS3) that I would like to take advantage of, but no one at the Apple store seems to know if I can upgrade from an Educational suite to a Commercial suite at these rates. I am no longer a student, and would be using the CS software to create for-profit pieces.
So, to boil it down, will the $599 upgrade work for Educational-to-Commercial, or do I have to start from scratch with the $1,800 suite? That's a big difference in price, and I'd hate to buy the upgrade only to find out it doesn't work and I have to shell out for the whole shebang.
Thanks for your help!

Be sure you buy the correct upgrade package CS to CS4 and do it before April 31 which is when tiered pricing kicks in and it will cost $200 more.
Also CS is the last upgradable version Adobe only goes 3 versions back as soon as CS5 is released CS will no longer be eligible.

I just purchased the upgrade from trial to full version. It does not work. It asks for my orginal serial key and when I paste in the trial key it says invalid??

Downloaded trial and then purchased the activate the full version option. The activation keys don't work. It wants an 'original' key. When I use the trial key it rejects it as invalid! Have I just been robbed of 75 quid?

lanceblack,
You know, I had seen your similar post in other forum with same issue. This itself is confusing for other participants including myself to keep track of forum discussion regarding same issue.
It would be nice if you keep your issue in proper forum in one place, less confusion for others.
Corky02 said better than I did yesterday. I am not quite sure why or what impresssion that you'd easily upgrade from try-out app into full-license. For many people are aware that what it means or what does this having to do with upgrading qualification with any applications. Why did you think you would get to upgrade that easily from trail try out app to licensed one?
I don't think the Apple's ads are misleading. I just think you got yourself confused. Sorry I can't help you. IF I am Apple employee, I would love to help you and get this resolved for you. I am just one of those participants helping others.
Once again, I am sorry that you get your view all wrong and lead into thinking that you are entitled to do so. But you need to understand that once if you had purchased a full license app from try-out app. Most people know what does that mean with try out app for the first time. And most people know that if they wish to purchase an application, this means purchasing a boxed (or electronic downloaded file) from Apple retail store (or online store). Plus, new venue at Apple offering Mac App store. I think that is a little confusion for some people who are not familiar with the difference.
I do believe that if you purchase from Mac App store, it doesn't require to put in license serial number. I think it is a different approach for some reason. I had bought some other Mac apps (not Aperture) from Mac App store few times. I haven't purchased Aperture updated version straight from Mac App store online. I bought mine from Apple retail store in Canada in person.
I still don't understand why you still think Apple is misleading you all the way. I don't think it is. In case if you haven't notice... there is way for you to get in touch with Apple called Apple Support Express Lane. Give it a try.

When upgrade from an older firefox version where an existing plugin was ready enabled, would this plugin become "ask to activate" after upgrade to v26?

What's the user experience if he/she upgrade from an older version of Firefox, where an existing plugin was ready enabled, would this plugin become "ask to activate" after the user upgrade to Firefox v26?

If plugins.click_to_play was set to true, it might. I am finding that click-to-play is not working very well with Firefox. Whether the plugins are set to Always Activate or Ask to Activate, it allows everything from a website to load once it is allowed from the icon in the address bar. I also have the extension Click to play per-element, and that seems to make no difference.

Upgrade from BW 701 Higher version

Dear Experts,
What are the best possible ways to upgrade from BW release 701 with Level 009 .
Either we can upgrade to 7.4/7.3 if so either it will supports BO 4.1 sp3 & Bics Connection.
What are the steps need to check before after upgradation from 701 to 7.4 /7.3.
Regards,
Seshu.P

you are posting in a wrong space. Please move your question to Netweaver/BW area.
BI Platform is for SAP Business Objects products.

SAP LSO Upgrade from version 300 to version 600

Similar Messages

Maybe you are looking for