SAP LSO:  What is the suspend data limit on the LSO Repository out of the box?

What is the suspend data limit on the LSO Repository out of the box?  What is this value set to by default in the SAP LSO?
Thanks in advance!

This laptop is equipped with SATA I, which is 150Gbit/s. You wont reach the maximum speed of your SSD but it will be much faster then your current old school spinner drive. An SSD will always outperform a normal HDD. Plus you should see a bump in battery life as well.
Hope this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • "The end date can't be set to occur before the start date" issue

    I have a subscribed calendar that draws from data in a Filemaker database. In all of these records, the start date & end date are the same. When I try to refresh the description, it fails with a "NSCocoaErrorDomain / error 1560" error, and the console log shows "The end date can't be set to occur before the start date."
    Well, it doesn't occur before the start date. It's the same as the start date. I can work around this by setting my Filemaker database to add a day to the end date, but that's a clunky solution.
    Anyone else run into anything like this?
    (iCal 4.0.3 and OS X 10.6.4, btw)

    It may not be the same problem, but the message was the same (end date...etc). I tore my hair out at the time trying to solve it. It was on my fathers computer. Everything appeared to be correct and consistent. What solved it was logging into MobileMe/account/personal info/time zone, where I found the time zone was wrong. I can't remember the detail now but at the time it seemed like a third place where time had to be correct. Worth your checking there anyway.

  • Data filtering in XML report with out changing the underlying query

    Hi, This is Nagesh and from Verizon.
    I'm testing Query based XML report in Peoplesoft 9.1 app with tools version 8.5.
    I'm trying to filter the data on XML Report template with out changing the underlying PS query. I mean filter the data on the report to only specific accounts though the underlying PS query query return transactions booked to all Accounts for a given Legal Entity. Is it possible. any advise or idea is highly appreciated.
    Thanks
    Ages

    If the value is not of importance how come it became obligatory in your program?
    Any how you can do one thing...Put some value in your obligatory field, put a debugger point where you are interested in  and use the pencil tool to change the value of the field while debugging. 
    Regards,
    Philip.

  • I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

    I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.   Before I updated my phone, I really liked it, now I don't like my phone at all!  When will this be fixed? I hope it's soon.  I'm thinking of changing providers now.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • What percentage of charge should an iPad mini have straight out of the box?

    What percentage of charge should an iPad mini have straight out of the box?

    enter the serial # here and it will tell you the year and month of production:
    http://www.powerbookmedic.com/identify-mac-serial.php

  • Error #1107     The ABC data is corrupt, attempt to read out of bounds.

    Today i stumbled upon the "Error #1107 The ABC data is
    corrupt, attempt to read out of bounds."
    I googled the problem, but the only suggested workaroud (foud
    in the bugbase - https://bugs.adobe.com/jira/browse/ASC-2289) was
    not applicable to my case. The problem was reproduceable with Flex
    3.2 and Flex 4 SDKs.
    However, commenting out parts of my code, i found out that
    the problem was causing my set of test data, which was
    syntactically correct, but very very large (static const Array with
    34611 objects to be precise). I deleted half of the test objects
    and the error was gone.
    Hope this helps somebody ...

    Nevermind I fixed it..
    you just change the default program you open swf's with in windows..

  • HT201412 I updated my iPad and shortly afterwards my display has changed to what looks like negative image colorization. Has something gone out on the display or have I unintentionally triggered a weird display setting?

    I updated my iPad and shortly afterwards my display changed to what looks like negative image colorization. Has something gone out on the display or have I unintentionally triggered a weird display setting?

    Settings --> General --> Accessibility --> Invert Colours
    is the setting you might have changed.

  • My iPhone 4S can't support camera 360 apps.Once I open the apps 3 sec it will auto jump out to the home page.Look likes the apps crashed.Isn't my iPhone problem or the apps got bug?Please help me.TQ

    My iPhone 4S can't support camera 360 apps.Once I open the apps 3 sec it will auto jump out to the home page.Look likes the apps crashed.Isn't my iPhone problem or the apps got bug?Please help me.TQ

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • How do I get to the InDesign screen to begin testing this product out in the free trial?

    How do I get to the InDesign screen to begin testing this product out in the free trial?

    in ios 7 if you click the home button it takes you home. if you double click it it shows all the apps running in the multitasking bar. on ios 6 they looked like actual apps on ios 7 its the page of the app

  • I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

    I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This will install the version of OS X that originally came with your model if you have a model that supports Internet Recovery - 2010 models and later: Computers that can be upgraded to use OS X Internet Recovery.

  • How can I turn off the cell service on my phone while traveling out of the country?

    How can I turn off the cell service on my phone while traveling out of the country?

    Airplane Mode

  • TS2771 the blue A apple store icone was wiped out from the first page how can I bring it back to live again

    the blue A apple store icone was wiped out from the first page how can I bring it back to live again

    See my response to your other post.
    B-rock

  • HT1766 Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

    Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

    In settings>general> cellular do you have it  turned ON?

  • Copying files to my MBA Early 2011, 10.6.7 changes their 'date modified' to the current date. It happens only to some of the files copied. Any idea what my be causing it. Never had this problem before, on othe macs I have owned.

    Copying files to my new MBA (early 2011) running 10.6.7 results in their 'modification date' to change to the current date. Any idea what may be causing it. It happens only to some of the files (there is no pattern to it.). I have not seen it previously in many other macs I have owned.

    Hi all
    I am bumping this thread again because I can't believe that I am the only one experiencing this issue. At times it is costing me hours repeatedly copying files until eventually the date doesn't show as modified.
    I thought I had cracked it earlier by changing the Sharing & Permissions settings, and applying to enclosed items the ability for Everyone, Me and Staff fo have Read & Write permissions - but that doesn't seemed to have changed much.
    Copying in smaller batches helps sometimes, but then other times it makes no odds, and the Date Modified date shows as the original date for a few seconds, only to change to today's date. Driving me nuts because there is no pattern to it.
    Files which I have copied and show their original modified date, when moved to a subfolder, then have their date changed to today!!! Copying other files into the folder results in files that were previously OK having their Date Modified changed!
    Am I on the only one?

  • Moving data between tables (how to find out if the 2nd table is empty)

    Hi,
    I have 2 tables, and I'm copying records from one table to another.
    I've followed the Wiki: [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/movingdatabetween+tables]
    So far, everything works ok.
    Here is my question: how do I get the number of records passed?
    I mean, how do I know the number of rows in the 2nd table? (Remember that this number is variable, because it depends on how many rows I've inserted and deleted on the 2nd table).
    I've tried to achieve that using a data store with a numeric field, but I couldn't find the way to increment/decrement the numeric field on data store, and insert/delete the row on table at the same time .
    All I want is to find out if the 2nd table is empty or not.
    Any ideas to solve this?
    Thanks in advance!
    Help will be point-rewarded.
    Marcelo

    Hi Ahmed
    thanks for your reply, it was very helpful!! (I've assigned points to you)
    However the user can add twice or more times the same row... so the counter doesn't reflect the real number of rows in the 2nd table.
    I've partially solved this also using a data store with a parameter called key_list, where I add (I mean, concatenate) the key field for the selected row.
    So, if I have a table with 4 rows with key fields "key1", "key2", "key3", the parameter key_list would get "key1;key2;key3".
    So far, it's ok. But when I remove a row previosly added.... I can't remove the key from the key_list parameter. (I mean, from 2nd table I choose to remove the "key2" row, but I don't know how also remove the key name from the key_list)
    I hope be clearly enough.
    Any help will be really appreciated and point-rewarded.
    Thanks again.
    Best Regards
    PS: is there any way of "mark" a row that has been added to the 2nd table? I mean, using (for example) a hidden boolean field named "added", that becomes true when the selected row is added to the 2nd table.

Maybe you are looking for