SAP LUMIRA table visualization

Does SAP LUMIRA allows to do formatting, conditional formatting on table visualization?I have checked for it and I didn't find it. I have a requirement to implement this so is there any solution or workaround for this?

Conditional formatting work around could be achieved using logic like if then else - see Lumira Logic: Practice Custom Calculations
For other types of conditional formatting I recommend looking at the Analysis Suite or Design Studio

Similar Messages

  • SAP Lumira Server 1.18 - Error While creating visualization

    Hi,
    I installed Lumira Server 1.18 and configured as mentioned in the blogs below.
    Simplified SAP Lumira Server Feature Configuration
    I created following users with the roles mentioned -
    LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
    LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
    LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
    I did the configuration in SAP Fiori mentioned in the blog with LSADMIN id. I also had Technical user id LUMIRATECH with sap.bi.common::BI_TECH_USER role which was used for configurations in Fiori. It was successful. Please see the screenshot below.
    After that I logged on to SAP Lumira Server Launchpad (http://<SERVER>:80<INSTANCE>/sap/bi/launchpad) with LUMIRADEV user. I acquired the dataset from excel. But when I tried to create visualization post successful acquisition, I am getting below error on dropping any dimension/measure on to chart.
    Please help. Do I need to give any additional rights to LUMIRADEV?
    Thanks,
    Abhijit

    Hi Henry,
    We have SAP HANA SPS 08 Database Revision 82.
    Are there any additional authorizations required for LUMIRADEV user (user which is used for Lumira Server). Please note I am able to publish stories and data sets created on top of HANA Online connection from Lumira Desktop and I am able to access, edit Stories as well as create visualization from published data set on Lumira Server. I suspect this is an issue with authorization.
    Appreciate your help.
    Thanks,
    Abhijit

  • Accessing SAP HANA table via Lumira

    Hi folks,
    I just tried to access a table in HANA via SAP Lumira. Unfortunately I´m just able to access Analytic Views and Calc Views with SYSTEM user per default. Which rights are necessary to grant to the user to get access. It worked with PA on another client before.
    Regards, Christoph.

    Hi,
    the Help docu suggests (page 27)http://help.sap.com/businessobject/product_guides/vi01/en/lum_117_user_en.pdf
    With SAP Lumira you can create charts on data available as:
    Analytic views
    Calculation views
    Yes, I believe the PA jdbc HANA 'reader/writer' component has different capabilities.
    Regards,
    H

  • Sort Sequence for mutli dimension table in SAP Lumira

    Hi Experts,
    I notice one interesting point in SAP Lumira for multi dimension
    For example, we have a table like below
    Country  City   GSV
    A1           B        100
                   C        150
                   D        130
    A2           E        200
    A3           F        100
                   G        150
    if you turn on the subtotal for GSV in Lumira table, result will be like below
    Country  City   GSV
    A1           B        100
                   C        150
                   D        130
                   Total   380
    A2           E        200
                   Total   200
    A3           F        100
                   G        150
                   Total   250
    Sort by GSV descending, result will like this
    Country  City   GSV
    A1           C        150
                   D        130
                   B        100
                   Total   380
    A2           E        200
                   Total   200
    A3           G        150
                   F        100
                   Total   250
    Here the sort sequence for City under each country is correct
    But the sequence for country is incorrect and I think the correct sequence for country will be
    Country  City   GSV
    A1           C        150
                   D        130
                   B        100
                   Total   380
    A3           G        150
                    F        100
                   Total   250
    A3           E        200
                   Total   200
    It looks like this issue is not only for Lumira and other company tools behaviors same as well
    Would you kindly let me know whether whether for sorting, the sort sequence should consider from 1st level to lowest level
    Best regards
    Alex yang

    Hi,
    I think you've got a typo in the last block.
    with regards to next steps - if you feel you have identified a defect, please log a support ticket via the normal routes.
    if this is considered an enhancement, please submit a request at the Ideas Place for Lumira.
    Many thanks,
    H

  • Publish Dataset and history in sap lumira server

    Hi Experts
    I'm trying to publish a dataset and story from the sap Lumira desktop to Lumira  server.
    Tools used
    SAP HANA DATABASE REV.80 INSTANCIA EN WINDOWS AZURE
    SAP LUMIRA DESTOP V1.18
    SAP LUMIRA SERVER V1.18
    The process I followed is as follows:
    1. Create Users:
    CONFIG: Assign the role sap.bi.admin :: BI_CONFIGURATOR. Some other role or privilege required?
    TECNICO: Assign the role sap.bi.common :: BI_TECH_USER. Some other role or privilege required?
    ANALISTA: Assign the role sap.bi.common :: BI_DATA_ANALYST. This user is the one that has the role to publish in Lumira sap server. Some other role or privilege required?
    2. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / FormLogin /
    I sign in with  the password created in hana studio  for each user and then make the change the password of each user CONFIG - TECNICO – ANALISTA
    3. Entry to http://<HOSTNAME>:80<INSTANCE>/sap/bi/launchpad/fiori
    I sign in with the  user CONFIG and in the catalag administration of sap Lumira server income in the field Enter technical  user TECNICO, so I confirm the sql connection.
    4. Entry to http: // <HOSTNAME> 80 <INSTANCE> / sap / hana / xs / admin
    I sign in with the user CONFIG sap.bi.launchpad.logic.v2 following path of the package and confirm that the sql connection is for the user TECNICO
    5. Entry to Sap lumira Desktop, sign in with the user ANALISTA to access the dataset, I create visualization and history, the last step is to publish the dataset and story in SAP Lumira server, for this I sign in with the user ANALISTA but when I clic on the button PUBLISH IN SAP LUMIRA SERVER is show me this error:
    Error - The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed.  Reason is ''. (HDB 11009)
    I searched many blogs of sap and tested with the following options but None of the above helped me to solve the problem.
    http://scn.sap.com/community/lumira/blog/2014/06/10/how-to-install-sap-lumira-server
    http://scn.sap.com/community/lumira/blog/2014/06/21/sap-lumira-server-on-hana--part-2
    http://scn.sap.com/thread/3532168
    http://www.saptechies.com/access-privileges-required-sap-lumira-from-sap-hana/
    http://scn.sap.com/thread/3523762
    http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-sap-fiori-launchpad-integration
    http://www.saptechies.com/security-settings-run-lumira-hana-online-shl-views/
    http://scn.sap.com/community/lumira/blog/2014/06/16/sap-lumira-server-post-install-configuration
    6. Another issue is when I access to Lumira server  http: // <HOSTNAME> 80 <INSTANCE> / sap / bi / launchpad / and I sign in with the user ANALISTA, I find a number of the dataset in lumira server but when I run  any for create a compose can not access   hana dataset.
    Shows me the following error
    Please help me with this issues
    Thanks

    Hi John,
    I also forwarded the incident to SAP and as suggested by SAP, after assigning sap.hana.xs.lm.roles::Administrator  my issue was resolved.
    Regards,
    Abhijit

  • Quick check on SAP Lumira

    Hi,
    I am quite new and in Lumira. Last 5-6 month i have create some report and graph
    etc using lumira. What i have done is i have download it into my laptop and
    work on it. I connect to universe,database using sybase iq jdbc connectivity to
    create report.
    Now suppose three users from same organiation  want to use this product in
    that case is it possible to install it in some server and all three user
    connect to this server to create report? or each of them have to install it in
    their own computer?
    Thanks
    and regards
    Sandip

    Hi Sandip,
    I would recommend that you check out this video by SAP's Joanna Denford.
    Share a Visualization or Dataset: SAP Lumira Cloud (June 2013) - YouTube
    It will take you through the process of sharing your Lumira findings with others on your team. Please note, everyone you wish to share with will need their own SAP Lumira Cloud account as well as a desktop account to enable this. If you don't already have a Lumira Cloud account, you can register for one here:https://cloud.saplumira.com/landing-page.jsp.
    Also, please check out our official Lumira Tutorial page here:Official Product Tutorials – SAP Lumira

  • Restiction on SAP Lumira user with BI_DATA_ANALYST role

    Hi,
    Is there an option to disable the SAP Lumira user with BI_DATA_ANALYST role from loading the Excel data into SAP Hana?   We would like the user to be able to create story boards and publish it on SAP LUMIRA server using HANA views but not allow him to load any flat file data.
    Thanks,
    Lakshmi

    Manish - if you are on BI4 there is no need for the SAP Integration Kit with Web Intelligence
    You can connect using the BEx Query
    For Lumira right now you can connect using the BEx query but only in the Visualize room - more enhancements are planned in 1.27 - see SAP Lumira Webcast including H1 Plans with BW Updates
    I don't think Gateway is needed in these scenarios
    Tammy

  • Extending Bilevel Partition - SAP Lumira Extensions

    Hi All,
    Has anyone tried extending the Bilevel Partition? http://bl.ocks.org/mbostock/5944371
    Also is it mandatory to have the data in CSV format? Can't we just use the JSON object? for example: the flare.json that has been used here
    If I try uploading the JSON format: I get the error for dimension length cannot be zero.
    My data model looks like this when I upload json file and select "other" from the format which looks pretty odd to me:

    You will have to get Lumira 1.25 (released last week). Then look at the following blogs:
    Introducing the All-New Visualization SDK for SAP Lumira
    The author has a number of other useful blogs that will be worth looking at.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter (#SAPLumira)
    Got Enhancement ideas? Use the SAP Idea Place 

  • SAP Lumira displays "Not a subscription user" for ArcGIS Online account

    Hello,
    I have created free trial ArcGIS online account and specified this user in SAP Lumira 1.17.1 Preferences / GEO Map Service.
    But when I try to visualize my Location data on Geo Map visualization I get an error message "Not a subscription user".
    Did anyone encountered this message? Maybe this message is related to Trial account type?
    Looking forward your feedback.
    Thank you very much.
    Best regards,
    Donatas Budrys

    Hello, Antoine,
    Yes, indeed, SAP Lumira is a great analysis and visualization tool. Mapping features makes SAP Lumira even more useful and powerful.
    So... I have another mapping question - http://scn.sap.com/thread/3596489 .
    Have a nice day.
    Best regards,
    Donatas Budrys

  • SAP Lumira Integration with ESRI Maps Issue

    Hello,
    I have created free trial ArcGIS online account and specified this user in SAP Lumira 1.20 build 36 Preferences / GEO Map Service.
    But when I try to visualize my Location data on Geo Map visualization I get an error message "Not a subscription user".
    Did anyone encountered this message? Maybe this message is related to Trial account type?
    Looking forward your feedback.

    Hi Manfred,
    Have you restarted Lumira? Also watch out for proxy configuration. see Lumira Timeout connecting to ESRI
    Good luck, and update the post with news!
    Regards,
    Antoine

  • Insert /delete data from SAP Z table to Oracle table and opposite

    Hi,
    Can u help me write this FM from the SAP side?
    So, I have two tables ZTABLE in SAP and Oracle table ORAC.
    Let's put three columns in each of them, for example
    TEL1
    TEL2
    ADRESS
    NAME
    where TEL field is primary from ZTABLE to ORAC...
    (in FM there shoud be abap code for writing data in ZTABLE after we press some pushbutton made in sap screen painter..)
    for example, when we write new record in ZTABLE
    00
    112233
    Street 4
    Name1
    this data shoud be inserted in Oracle table ORAC.
    when we write new record in Oracle table for example
    01
    445566
    New Street
    Name2
    this data shoud be inserted in ZTABLE.
    Field TEL1 can be only of two values 01 or 02, other combination is not valid...
    I must have all data from Oracle table ORAC in ZTABLE and opposite.
    It should be the same scenario for DELETE...
    And this communication should be online between sap and table in oracle database...
    Can u help me from sap side? and give idea how to configure on oracle side??
    Thanks a lot,
    Nihad

    I dont know if we can directly connect to a oracle database ( wait for the answers from others on this )
    but in XI we have the JDBC adaptor to insert and retrieve data.
    so for the outbound from SAP the flow can be something like this (with XI in landscape):
    1) You have a screen to maintain a new entry / delete an entry
    2) On save , this record gets saved or deleted from the Ztable in SAP
    3)) In the same screen you can call a proxy class-method (generated using SPROXY transaction ) to send the record to XI.
    4) XI to format it and insert into the oracle table
    Mathews

  • Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

    Hi All,
    Please help.........
    Can we use SQL Query to READ(No Creation/Updation/Deletion  just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
    Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
    Thanks in Advance
    Regards

    All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
    Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
    But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
    BR,
    Alok

  • A few questions on SAP Lumira

    Hi guys,
    Recently, I have started working on SAP Lumira, to see its functionality and I have a couple of questions as mentioned below.
    Please advise if you have any clue on these.
    1. How is the Security managed in Lumira? Is there anyway where we can maintain user profiles and roles in Lumira?
    2. Is there any kind of transport request manager/organiser for Lumira?
    Thanks a lot!

    Hi,
    sure, there are lots of resources about the BIPlatform Add-On for Lumira Server.
    see here in our Lumira community:
    http://scn.sap.com/community/lumira/blog/2014/07/31/sap-lumira-server-118-and-lumira-add-on-to-bi-41-platform-pre-requisites
    http://scn.sap.com/community/lumira/blog/2014/07/01/how-to-install-sap-businessobjects-bi-add-on-for-sap-Lumira
    http://scn.sap.com/community/lumira/blog/2014/07/02/how-to-install-sap-businessobjects-bi-add-on-for-sap-lumira-part-2
    Regards,
    H

  • SAP MM table for MRP

    Dear Expert,
    I have question about SAP MM table.
    I have material with MRP type is PD and lot size is EX, let say this material is X.
    Then i create reservation from WO using material X. In MD04, we will see there is requirement for material X under that WO. Stock does not exist than MRP Run will create PR to fulfill this requirement.
    But we do not know, this PR was trigeer by what WO.
    I want to ask all of you, is there table for SAP to save this mapping.
    So we can surely thougt that this PR came from this WO.
    I just trying to trace, i found MDRS, but in this table, i am not found the PR number with specific.
    Please let me know, if you have information
    Appreciate for your help and Thank you
    Regards,
    Silvia

    Hi Silvia,
    In MD04, click on the PR & click on pegging info, you will be able to see which WO is calling this PR.
    If you want to check for a lot of materials at a given time, then create a Z report & call the FM -> MD_PEGGING_NO_DIALOG
    But note that the same PR / planned order can be pegged to many requirements depending on the MRP parameters maintained in the MRP views.
    Hope the above answers your query.
    Regards,
    Vivek

  • How to create a crystal report based on SAP R3 Tables????????????

    Dear All!!!!!!!!!!!
    I am new to SAP BO crystal reports.
    I want to extract the data from SAP R3 tables and design the crytal report. When i tried to make a new connection;
    We have lot of connection as OLAP;OLE DB and etc, I am not sure how to establish a connection between R3 tables and crystal reports. I cannot able to find documents too...
    Is there any documents available to make the connection or can anyone help me out to figure this..........
    Thanks in advance.
    Regards,
    Suman.

    Dear Efstratios Kara,
    I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
    I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
    But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
    If CR going to support SAP Table connectivity on specific version, what is that version.
    Waiting for your reply.
    Regards,
    Suman

Maybe you are looking for