SAP Mail: how to find program generating Email in background

Hi all specialists
We have a lot of programs generating Email in background.
Question: for a specific Email (found in sost) how is it possible to find the program Id that have issued the Email?
In SOST, i find only the logon Id.
I thank you for your help.

Hi Jean-Claude, this is the SAP BusinessObjects Explorer forum so it's not the right place to post your question.
It's possible you are using SAP CRM?
try it here: SAP CRM: Webclient UI - Framework

Similar Messages

How to find or generate crash log in Indesign CC

Hi,
In InDesign document, I am updating the links using javascript. After updating the links, If i have opened the same document for two or more time, Indesign gets crashed. So i need to find the crash logs.
Please tell me how to find or generate crash log in InDesign CC.
Thanks,
Vimala L

use the variables ErrorCode and ErrorDescription
to create the body of the email message
these variables will give you the error details.
refer : http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e7a5e86b-bcfb-4bfe-9b70-822169cb747b/show-error-message-in-ssis-email?forum=sqlintegrationservices
variable reference : http://technet.microsoft.com/en-us/library/ms141788.aspx
Surender Singh Bhadauria
My Blog

I Forgot My Rescue Email , But I Don't Know How To Find The Rescue Email Address! Please Help!

I Forgot My Rescue Email , But I Don't Know How To Find The Rescue Email Address! Please Help!

See the "more like this" section on the right side of this page

How 2 find program for smartform

how 2 find program for smartform

Hi,
go to TNAPR table and find the driver program for the layout.
give the layout name, if you know the output type also give it.
OR
go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
that way you can find..
Or else...
Go to the Tcode -> NACE
OR
Go to the T-code 'SMARTFORMs'
Give your form name
go to the general attributes.
Check the Package name.
then go to T-Code-> SE80
there check the program name for a package wise
Regards,
KK
Message was edited by:
Kishore Kumar Karnati

How to find Program Name by Recording name

Hi,
How o find program name ? for example i have recording(SHDB) name is:ZVA01REC.
i want to find the respective porgram for that recoring?
Thanks and Regards,
Anu.

Hi Anitha,
"No it's showing standard program name like:SAPMM06E
but actual program name is:ZBDCME22."
SAPMM06E is the program the recording runs
ZBDCME22 must be an additional program that someone must have created for running the recording.
There is no way for u to find a program for a given recording (this is only a one way trafic; recording -> program create; not visa versa)
your best bet would be that search in se38 for programs starting with ZBDC* and then check the short text. may be the person who made it was kind enough to update the short text with teh recording name.
Hope this was of some help.
Regards,
Sagar.
Edited by: Sagar Mehta on Nov 12, 2008 10:00 AM

How to find program in menu? (Urgent!!!)

Dear all,
As we know, the SAP menu gives us easily access to corresponding transactions or applications. Each node in SAP menu links to a transaction. Now, I would like to know how does SAP store the relation for program in the menu. Is there a table to keep the data for this? I haven't find this table yet. Or, I wonder if it exists a function module to get this. Is anyone can help me? Please offer me your suggestion and comment.
Looking forward to receiving your replies! Thank you very much!
Regards,
Justin

Hi Justin,
Program name and Sceen ( they are the two keys) by which SAP recognizes any transaction. This is pretty evident while doing BDC. We can get the program name and screen name using Menu path System->Status. Table TADIR keeps track of all the objects. Table TSTC links the transaction with the program name. While creating dialog transaction using SE93 we have to give both program name and screen name. In report transaction default screen is 1000 that of selection screen.
Regards,
Mallick

How to find program which created the session

Hi friends,
can anybody tell me, how to find out the program name that as generated perticular batch session in SM35.
I have session name and i want to find out the program which created the session.
Thanks in advance.
Saya

Hi Saya,
Check table <b>TBTCO</b> and<b> TBTCP</b> to know about the program created by a session.
Give Job name to TBTCP-JOBNAME and get report name in the field TBTCP-PROGNAME.
Thanks,
Vinay

In Mail: how do I mark prior emails as read.

Aside from opening them one at a time, how can I mark prior emails as "read" in one or two steps?
Thanks!

Select all (command A) in the mailbox.
Mail>Messages>Mark > as read

How to find Program or transaction is already running

Hi ,
How to find one program or transaction already running in background or foreground ( any user).
this is very useful to me , to avoid double time running the same program or transaction.
Thanks in advance
regards,
Moon
Moderator message: FAQ, please search for previous discussions of this topic.
Edited by: Thomas Zloch on Apr 21, 2011 10:15 PM

Hi Goldmoon,
Please search before posting. There are many threads available regarding this.
Kesav

How to find all generated profiles (with more than one nomenclature)

Hello all,
I have an Solution Manager 4.0 system and I want to find out:
a. all sap profiles created via SU02 (not generated profiles)
b. all generated profiles
b. all generated profiles with user assignment
Initially I extracted values from tables UST10C and UST10S for single and comp. profile information. For profile assignment, I searched UST04. But then I realized that generated profiles don't follow a standard nomenclature. Some start with T-54, some with T-56, then T-AA, T-MW [now there some T_MW profiles created via SU02 ]
Can anyone help me here please?
Thanks and regards,
Sundar.

Hi Sundar,
please check table USR10.
The interesting field for you is USR10-Typ.
Field value meanings:
C    Composite Profile
G    Generated Profile
S    Single profile
b.rgds, Bernhard

UITableView section header: How to find out font size and background color

Hi, does anyone know how to find out the default font and default background color(or image?) used in the section header of a tableView
I'd like to create a view with the same background color/image and use the same font (with different color) used by the section header

I don't think there are any getter methods for a section header. But I wouldn't be surprised if the header was an object. You might try setting some header text to a key string and searching recursively through all the subviews for objects that respond to a text message. It might help to also print the description of objects that don't respond to text. I haven't tried this yet, but will let you know if I get any useful results.
I guess another approach would be to use viewForHeaderInSection to set the font and color to whatever you wanted. Then you wouldn't have any problem matching it.

How to find program from SAP Quick Viewer

Hi Experts,
Actually report had generated from SAP Quick Viewer. Now i need to trace the SAP QUERY through the program.
Please suggest your solutions or steps to find the program from SAP Quick Viewer.
Another clarification, is it possibe to add new fields in selection-screen through SAP Quick viewer.
Please suggest steps to do
Best Regards,
Bharat

Hi,
I need clarification in the programming name convention.
Report name: AQZZZPS=========Z_PSPAYMENT===
Can you define what is SAP Query and Report program?

E-mailing: How to sent out an email to the Managers OUTLOOK express account

Hi Experts,
System is ECC6.0.
I hv requirement that, the sales orders comes from EDI into SAP. If there is a error in material (like,
non-sellable, not existing etc.), I need to trap this issue/error.....................fine, I did it and working fine.
But, in next step, I need to send out an email to the manager to his/her OUTLOOOK express(NOT work flow account) email account"s inbox, with a standard specified format!!!!
I do NOT think, work flow is necessorily involved here in this scenario!!!
So, let me know that,
1) Is WORK FLOW involvment i there?
2) How to get it done that, sending out email to OUTLOOK express account with a standard format
3) Any FMs, piece of code
replies appreciated.
Edited by: SAP ABAPer on Sep 6, 2008 3:34 PM
Edited by: SAP ABAPer on Sep 6, 2008 3:35 PM

Hello
I can offer two proposals:
1) Standard report RSEIDOCA is used to actively monitor IDoc processing.
This report can be scheduled in background and reports failed IDocs. Unfortunately SAP did not offer e-mail notification together with this report which is really a shortcoming. However, I have written a modified version of this report which allows to send e-mails (see below).
2) Another scenario we are using is to replace wrong partners/materials with dummy partners or materials ensuring that the IDoc will be processed under all circumstances. In this case we set the Purchase order number supplement (sales order -> header -> tabstrip Order Data: field VBAK-BSTZD) = 'ERR'.
Using a condition (transaction VOFM ) we trigger an ORDRSP IDoc if a new sales order has BSTZD = 'ERR'. This IDoc is forwared to SAP-XI and translated into an e-mail to the customer service.
The crucial parts of my report ZRSEIDOCA are shown below (adjust selection screen and notification routine):
...*    perform show_act_moni.
**    PERFORM send_notification.
    PERFORM _send_email_notification.
    MESSAGE s596.
ELSE." keine Benachrichtigung
    MESSAGE s597.
ENDIF.
*&      Form _SEND_NOTIFICATION
*       text
* --> p1        text
* <-- p2        text
FORM _send_email_notification.
* define local data
* All activities done via facade CL_BCS!
DATA: lo_send_request       TYPE REF TO cl_bcs.
DATA: lt_text               TYPE bcsy_text.
DATA: lo_document           TYPE REF TO cl_document_bcs.
DATA: lo_sender             TYPE REF TO cl_sapuser_bcs.
DATA: lo_recipient          TYPE REF TO if_recipient_bcs.
DATA: lo_bcs_exception      TYPE REF TO cx_bcs.
DATA: lx_sent_to_all        TYPE os_boolean.
DATA: ls_edidc              TYPE edidc,
        lo_idoc               TYPE REF TO zcl_idoc,
        lif_idoc              TYPE REF TO zif_idoc,
        ls_text               TYPE soli,
        ld_text(50)           TYPE c,
        ld_subject            TYPE so_obj_des,
        ld_date(10)           TYPE c,
        ld_time(8)            TYPE c.
TYPES: BEGIN OF ty_s_idocdata.
INCLUDE TYPE vbak AS vbak RENAMING WITH SUFFIX _vbak.
INCLUDE TYPE kna1 AS kna1 RENAMING WITH SUFFIX _kna1.
TYPES: END OF ty_s_idocdata.
DATA: ls_idocdata   TYPE ty_s_idocdata.
TRY.
*     -------- create persistent send request ------------------------
      lo_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create document from internal table with text
**      APPEND 'Hello world!' TO lt_text.
**      lo_document = cl_document_bcs=>create_document(
**                      i_type    = 'RAW'
**                      i_text    = lt_text
**                      i_length = '12'
**                      i_subject = 'test created by ZRSEIDOCA' ).
      ld_subject = 'IDoc Monitoring'.
      WRITE syst-datum TO ld_date DD/MM/YYYY.
      WRITE syst-uzeit TO ld_time.
      CONCATENATE ld_subject syst-slset
        INTO ld_subject SEPARATED BY space.
      CONCATENATE ld_subject ':' INTO ld_subject.
      CONCATENATE ld_subject ld_date 'at' ld_time
        INTO ld_subject SEPARATED BY space.
      LOOP AT i_edidc INTO ls_edidc.
        " Create IDoc instance
        CLEAR: lo_idoc,
               ls_idocdata.
        lo_idoc = zcl_idoc=>create_by_idoc_control( ls_edidc ).
        IF ( lo_idoc IS BOUND ).
          lif_idoc ?= lo_idoc.
          CALL METHOD lif_idoc->get_specific_data
            CHANGING
              c_data = ls_idocdata.
        ELSE.
        ENDIF.
        WRITE ls_edidc-docnum TO ls_text-line NO-ZERO.
        CONDENSE ls_text-line.
        IF ( ls_idocdata-vbak IS NOT INITIAL ).
          CONCATENATE 'POnumber' ls_idocdata-bstnk_vbak
            INTO ld_text SEPARATED BY '='.
          CONCATENATE ls_text-line ld_text
            INTO ls_text-line SEPARATED BY space.
          WRITE ls_idocdata-bstdk_vbak TO ld_text DD/MM/YYYY.
          CONCATENATE 'POdate' ld_text
            INTO ld_text SEPARATED BY '='.
          CONCATENATE ls_text-line ld_text
            INTO ls_text-line SEPARATED BY space.
          IF ( ls_idocdata-kunnr_vbak IS NOT INITIAL ).
            CONCATENATE 'Customer' ls_idocdata-kunnr_vbak
              INTO ld_text SEPARATED BY '='.
            CONCATENATE ls_text-line ld_text
              INTO ls_text-line SEPARATED BY space.
          ENDIF.
          IF ( ls_idocdata-name1_kna1 IS NOT INITIAL ).
            CONCATENATE '(' ls_idocdata-name1_kna1 ')'
              INTO ld_text.
            CONCATENATE ls_text-line ld_text
              INTO ls_text-line SEPARATED BY space.
          ENDIF.
        ENDIF.
        APPEND ls_text TO lt_text.
      ENDLOOP.
      lo_document = cl_document_bcs=>create_document(
                      i_type    = 'RAW'
                      i_text    = lt_text
**                      i_length = '12'
                      i_subject = ld_subject ).
*     add document to send request
      CALL METHOD lo_send_request->set_document( lo_document ).
*     --------- set sender -------------------------------------------
*     note: this is necessary only if you want to set the sender
*           different from actual user (SY-UNAME). Otherwise sender is
*           set automatically with actual user.
      lo_sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD lo_send_request->set_sender
        EXPORTING
          i_sender = lo_sender.
*     --------- add recipient (e-mail address) -----------------------
*     create recipients - please replace e-mail address !!!
      LOOP AT o_email.
        lo_recipient = cl_cam_address_bcs=>create_internet_address(
                                          o_email-low ).
*       add recipient with its respective attributes to send request
        CALL METHOD lo_send_request->add_recipient
          EXPORTING
            i_recipient = lo_recipient
            i_express   = 'X'.
      ENDLOOP.
*     ---------- send document ---------------------------------------
      TRY.
          CALL METHOD lo_send_request->set_status_attributes
            EXPORTING
              i_requested_status = 'N' " suppress delivery confirmation
              i_status_mail      = 'E'.
        CATCH cx_send_req_bcs .
      ENDTRY.
      TRY.
          CALL METHOD lo_send_request->set_send_immediately
            EXPORTING
              i_send_immediately = 'X'.
        CATCH cx_send_req_bcs .
      ENDTRY.
      CALL METHOD lo_send_request->send(
        EXPORTING
          i_with_error_screen = 'X'
        RECEIVING
          result              = lx_sent_to_all ).
      IF lx_sent_to_all = 'X'.
        WRITE text-003.
      ENDIF.
      COMMIT WORK.
* *                     exception handling
* * replace this very rudimentary exception handling
* * with your own one !!!
    CATCH cx_bcs INTO lo_bcs_exception.
      WRITE: text-001.
      WRITE: text-002, lo_bcs_exception->error_type.
      EXIT.
ENDTRY.
ENDFORM.
Regards
Uwe

Mail: how to download ONLY last emails and not the whole hotmail.

Hi!
Quick question: like what Mail does in iPhones/iPads, how can I configure Mail in my iMac or Macbook Pro so that it only downloads the last, say 50 emails and not the 4000 aprox. emails I have inside the hotmail (now outlook) server?
I have been wanting to use mail for a long time but I can't seem to find that option. I only want to see the LAST EMAILS like what happens in the app on my iPhone.
Thanks.

unless there is a special setting in yahoo webmail interface that allows this (gmail pop has it for example), there is no way to do it. POP will download all available messages on the first download. that's how POP works. from there on it will only download new ones.

Question: Junk Mail: How to extract groups of emails to add to blocked senders.

Hi Ernie
I need to find a way to extract lists of emails from Junk mail folder and add them en masse to blocked senders, without having to add them to my blocked senders one by one.
I have had the same email address for too long to change it, but I receive huge amounts of junk mail. I have so far barred nearly 2000 senders and have 1100 sitting in my junk folder form the last week. I barred them one by one, using RULES function...I simply cannot keep doing this.
I have MacBook Pro running Mavericks, plus iPad plus iPhone 5.
The problem is aggravated by the fact that Apple has a weakness in Mail: I may bar thousands of senders on my Mac, but the filter does not sync the barred addresses to my iPad or iPhone, so if I use Mail on either, I get many thousands of emails at once and have to mark them one by one to delete. It's ridiculous.
To solve this problem, I have decided to do is block all the senders in webmail.
However I still have the same problem with extracting multiple addresses from my junk mail folder in order to copy them into blocked senders list.
Genius Bar said it can't be done. I think they're wrong. There simply as to be (a) a location on my Mac where I can find a list of all those I have already barred; (b) a way to extract email addresses from groups of received mail.
I'd be grateful for some advice, please.
<Email Edited by Host>

Is there nobody ot there who has a solution to my problem, please?

SAP Mail: how to find program generating Email in background

Similar Messages

Maybe you are looking for