SAP Maintenance Optimizer without saprouter

Hi Experts,
Is it possible to approve patches without connection to SAP via saprouter?
We have a strong security policies and we have not a possibility to use saprouter for connection to SAP. We installed and customized Solution Manager 4.0 and we want only approve our basket on SAP Market Place. Is it possible or not?
Best regards,
Alexander Nikolaew.

Hi, all
in FAQ about MOPZ I red about secure RFC connection. What does it meen?
link: https://websmp102.sap-ag.de/mopz (FAQ about Maintenance Optimizer):
27. How can customers with strong security policies use Maintenance Optimizer?
To work with Maintenance Optimizer, it needs to be connected via secure RFC connection to SAP. Without this, it is impossible to use Maintenance Optimizer as collaboration platform. However, there are customers with high security requirements. Their procedure can be as follows:
1. Customer logs on to SAP Service Marketplace from a PC. This may be done in an environment even without connection to SAP Solution Manager.
2. Customer adds all required files to the download basket.
3. Customer then changes to a PC with connection to SAP Solution Manager and confirms the download of the data. For more information about secure RFC connection please refer to IMG in SAP Solution Manager.
4. The files are available for download and can be downloaded from the PC with a connection to the SAP Service Marketplace.
Best regards,
Alexander Nikolaev.

Similar Messages

Maintenance Optimizer - ConfigTool.sh - SAP NetWeaver 7.0

Hi Everybody,
First I wanted to set up my MOPZ to do this I have to create a RFC "SAPSLDAPI"
Until there no problem but the next step become a little more problematic.
I have to run the admin tool /usr/sap/SOL/..../j2ee/admin/go.
Unfortunatly I lost the password's J2EE_ADMIN, no problem google is your best friend and then I tried to run the config tool. Oh big surprise
The java class not found: com.sap.offline.OfflineToolStart
What can i do to fix this problem?
Note 1024932 - Maintenance Optimizer: Collective Note
http://help.sap.com/saphelp_nw70/helpdata/en/b7/341241d71cd349e10000000a1550b0/content.htm
Edited by: Hafid CHEBRAOUI on Jan 14, 2009 4:22 PM

It sounds like you have two different issues here.
MOPZ
And Java Stack not starting.
Maintenance optimizer requires that your connection to SAP is in tact first through the saprouter. Do you have all of that in place and is your rfc connections for SAP_OSS and SAPNET_RFC working.
SAPSLDAPI is a connection for the SLD not for the maintenance optimizer.
The link you put below doesn't have anything to do with configuring maintenance optimizer. The ossnote you posted is a collective note for maintenance optimizer and points you to spro to follow the instructions.
Review https://websmp108.sap-ag.de/solman-mopz
Review ossnotes 990534 and 1024932
try running SE38 SM_PREP_MAINTENANCE_OPTIMIZER That may give you some assistance.
Anyone that is going to download using the maintenance optimizer needs to exist in transaction AISUSER
As for the Java stack.
It sounds like your path is not right. Did you update your path environment variables with the installation directory of java? Check that java -version is working from the <sid>adm login.
Lee

Problem Maintenance Optimizer - SAP GRS Access Control 5.3

Hi,
I have a problem in calculating the SPS to the SAP GRC Access Control 5.3.
I recorded the system automatically from SLD. I defined the logical component and I created the solution.
Now, when I try to calculate the Maintenance Optimizer error is generated:
No Addon Product Version allowed for transaction: SAP GRC ACCESS CONTROL 5.3 (01200615320900001673)
Program:CL_MOPZ_EVALUATE_INSTANCES====CP,Include:CL_MOPZ_EVALUATE_INSTANCES====CM00R,Method:CHECK_INPUT,Line: 67
Can you help me?
Best regards,
Diego.

Hi,
Check this note.
1464712
This should solve your problem.
Feel free to revert back.
-=-Ragu

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Migration without SAP Maintenance

Dear gurus,
Is it possible to do a server migration if we do not have SAP maintenance?
I mean, we wouldn't have S-User ID as when maintenance with SAP terminated, our S-User id is locked so we can't request migration and new license key.
Please advise is there workaround?
Thanks for your help.
Best Regards,

Hi,
This is not possible.
Thanks
Sunny

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Maintenance Optimizer

Dear all,
When starting "Create New Maintenance Transaction" in Maintenance Optimizer, an information message prompted:"Status profile SLMO0001 does not exist. Please checl." and the following messages are shown after:
Warning Customizing not available in logon language EN, use language EN
Error Status profile SLMO0001 does not exist. Please check
Error Status profile SLMO0001 does not exist. Please check
Warning Status values of procedure type SLMO not read
I tried to implement note#1090202, all succeeded except step 2(a). When adding in SOCM_ACTION_003 I have an error message:
Entry SLMO0001 does not exist in TJ20 (check entry)
Solution Manager Package Level:
ST 400 0013 SAPKITL423 SAP Solution Manager Tool Component Supp. Pkg.
Would anyone can help?
Many thanks!
Daniel

Hi,
i had the same problem and i solved it with note 1090202 this problem is caused because of a missing customizing setting.
I dont know how the creater of this thread could be so egoistically and mark this thread as answerded without posting the solution. I think this is a insolence.
( He mentioned the same not as i do, but he didn´t wrote that this was the final solution)
I hope i can help somebody with posting my solution!
BR
Stefan

Maintenance Optimizer - ABAP queue check failed

Hi guys.
When running Maintenance Optimizer for a SAP ERP 6.0 EHP4 which has SAP HR 604 installed, the following message is displayed
ABAP queue check failed
Error The Installation/Upgrade Package for Add-on SAP_HR rel. 600 is not available.
The goal is update toEHP7 SP2.
Not sure why is stating SAP_HR rel. 600 package is not available when the system has 604 release.
During packages selection, Human Capital Management is checked and on the source system is listed SAP_HR 604 SP12
The Solution Manager version is 7.1 SPS8, CR Content is updated to 9.9.
Also have applied SAP Note 1277035 Recommendations, releted to EHP4 Missing, but still no luck
This seems to be similar when SUM perform an EHP Inclusion, and cannot find the packages on the EPS Directory, but this is happening on the Maintenance Optimizer.
Is this a problem with SAP Backbone, or should i do some manual corrections on the system or Solution Manager to make it aware SAP_HR is at al level 604 SP 12?
Thanks!

Hello,
That type of error you describe is mostly always related to an issue in the SMSY/LMDB definition.
It is likely that the issue is a wrong product instance was assigned to the system.
In LMDB it is easy to check , even without verification checks (which sometimes may be the root cause, a bad verification check happens sometimes). If you go to the product system, then open the node technical systems -> AS ABAP -> Software, and go to the product instance tab (in SP10, product instance - details), when you select a given product instance , you see whether the software components that are part of it are installed or not (there is a frame in the lower part of the screen that shows the software components with flag 'installed' ticked or not). Chances are, one or more of the instances have few or no software components installed.
Mind you, you must keep at least one SAP ERP 6.0 product instance assigned, this would be the exception to the rule, but if you have an EHP4 for SAP ERP 6.0 system, it should be only one.
Best regards,
Miguel Ariño

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Maintenance Optimizer = Unnecessary Overhead

Who in the world came up with an idea to make it mandatory to use Maintenance Optimizer for SAP patches? There's no real value in this tool except additional bureaucracy. We still have to download support packages & import them manually. So where's the benefit?
First, we are now forced to spend a week to patch Solution Manager to the required level (although we could safely ignore it until now - we don't use Solution Manager). And then the support package with the Maintenance Optimizer included appears to be buggy and counterintuitive to configure (including the latest one - Level 11)
Maintenance Optimizer is making our life more difficult, not easier. It was clear and simple to download the support packages one-by-one - only what we need. So why to take out a working, trusted and efficient mechanism?
Just expressing my serious disappointment. Make the Maintenance Optimizer optional, not mandatory - hope someone from SAP will read it.

Hi Marek (and all others),
I've said and communicated that in the past also - here, in the OSS, to the sales reps (they even didn't know it's mandatory as of 2nd of April), to the "complaint management", on official SAP events, in the DSAG et al - no luck whatsoever, everybody is totally convinced, that THIS tool, which is even more complex than everything we have in our company, is THE solution for EVERY problem. The main problem is in my eyes, that the SolMan is the biggest problem itself. The IDEA is not generally bad, but the implementation is unfinished, overly complex, non-intuitive and lacks a consistent setup and "view". In my eyes it's just a conglomerate of transactions put together in "some form" without a real thread.
Criticism and customer input IS being heard here and things became "easier" already but the fact, that customers are URGED to implement SolMan, no matter if they have already another ticket system, monitoring infrastructure, implementation tools, project management etc. is the wrong way, it's pure pretentiousness. And even if you don't use anything of those nice features, it's WAY too bloated to just download SPs.
And you still don't need SolMan to download - you can still select them one-by-one without everything, you just have to download from the download basket instead of direct clicking on a link in the browser, that's the only change so far and I'm VERY happy with that.
Don't expect some official person from SAP stating on this here, that decision was made at management level @ SAP and I'm sure that SAP internally there are many people thinking the same way but via customers the strategy must be consistently communicated and thus nobody from SAP here will say anything against it, even if they think likewise.
I still have hopes, that, after Agassi is gone and Plattner is back (well, at least a bit), winds will change again back to business, back to quality and back to less intrusive and less presumptuous customer interaction.
Markus

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
<i>'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'</i>
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

Configure maintenance optimizer

Hi,
I am configuring "Configure Maintenance Optimizer" and I get the following error when I use T-code SM_MOPZ.
SAP MOPZ auto-configuration warnings
Message no. IMG_FASTCONF030
What's happen with my SOLMAN system?
Please advise!!
Thanks
Duypm

Hi Duypm,
Its a long process to go.
First, Raise a message with SAP for SAPROUTER certificate if you are planning to use SNC. You need to provide a public IP of your SAPRouter machine in the message.
Second, Send the filled form to SAP
Configure SNC on SAPRouter
Configure OSS1 and SAPOSS rfc destination.
Then configure Maintenance Optimizer.
Cheers.....,
Raghu

There are no stack configurations available in the Maintenance Optimizer

Hello,
I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0.
I have downloaded the EHP1 and cpoied them into the "EPS\in" directory.
When I press the u201CStack Configurationu201D button, I get a pop-up that says, "There are no stack configurations available in the Maintenance Optimizer".
Does it require any files like .XML to load the files? Please let me know your suggestions.
Thanks,
Niranjan.

what happened to us was we did not download the upgrade programs for EHP1. Make sure you download both SPs in note 1169247. The first one has the SPs and upgrades SPs for Solman 7.0 to EHP1. The second download for the SPs for EHP1).
Also, we did it manually without the using the button 'stack configuration. Hope this help.
(Supp Packs and Upgrade SPs for Solman 7.0 to EHP1)
SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-20 (07/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
(Support packs for EHP1)
SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 20 (03/2009)
Source stack : 18 (11/2008)

After EHP1 upgarde Maintenance Optimizer not work

Dear ,
In our solution Manger Maintenance Optimizer was proper configure and working . But After Implement or Upgrade EHP1 ,When I run tcode solution_manager for downloading some SP.Then click on Maintenance Optimizer its direct goes to http://hostname/client001......etc
After Implemention EHP1 on Solution manager 7.0 ,Should we configuer Maintenance Optimizer again. OR any post implementation step after EHP1 upgrade.
why it going to http://hostname/client001......
Now how I can download SP or Note from my solution manager in that EHP1 has been upgraded.
regards

I have upgrade solman 7.0 to EHP1 solman 7.01 SP26.
in etc/hosts IP address and Host name allready exist.
when Click on Maintenance Optimizer it goes on beow site
http://saprouter.domain.ext:8000/sap/public/myssocntl?sap-client=100
Where saprouter is my solman Host Name and Client 100 is where I am logging.
is any parameter changes required for resolve this problem
regards

SAP Maintenance Optimizer without saprouter

Similar Messages

Maybe you are looking for