Sap Makit Chart Data Plotting Issue
Hello All,
I have been facing an issue while plotting data in Sap Makit Chart, As the number of data to be plotted is very large i.e around 300 values.
This is how it plots....
But unfortunately all data are not getting plotted although the width of the chart is kept as 100%..The code is as follows
Now it seemed to me once that may be increasing the width might work out and it actually did.All the values are getting plotted but there is a horizontal scroll appearing .
This is how it looks
I have made the following change
Please suggest something so that I can Plot all the data and can display it at a time without scroll.
Hi Swapna,
You are using maikt library. Instead of You can go for Viz chart.
And regarding the scrolling issue, The chart is responsible by its width but the labels coming in the dimension are not responsible at all. That is why it is coming like this.
Best Regards,
Rabin
Similar Messages
-
Sap.makit.Chart issue
Hello
I am making 4-5 charts on sap.m.Carousel, the data to build chart is preloaded,
The application is taking around 5-6 seconds to generate charts on browser.
But on a mobile device its taking around 40-45 seconds.
Need help in reducing time to generate charts on mobile device.
Help is appreciated.
Thanks and Regards.Maybe, you're loading all the 5 charts in a single go. Load only the first chart that has to be shown and then the others when needed.
-
Sap.makit.chart weird behaviour
I am having a requirement to display charts in mobile device. Charts are displaying correctly on the browser(fakeOS=android) while testing according to requirement.
But I faced issues in displaying the charts on mobile device(tested on Android mobile). Charts are getting generated,as all alerts are shown properly , but are not getting displayed.
Note: Issue of not able to display chart is found only on android 4.3.
Any idea?
Regards
Roshan JalgaonkarHi Swapna,
You are using maikt library. Instead of You can go for Viz chart.
And regarding the scrolling issue, The chart is responsible by its width but the labels coming in the dimension are not responsible at all. That is why it is coming like this.
Best Regards,
Rabin -
Funnel chart data presentation issue
ADF Experts,
I have a DVT Funnel graph and it is displaying the actuals against the target in percentage like 21.34% . Is it possible to round it off to the closest integer (21% in this case) ? Also the actuals and the target vales come as a tool tip, is it possible to display that value by default in the funnel ?
thnks
Jdev 11.1.1.5For Question 1 ) Click on Slice label and set the Auto precision to off.
Any inputs on the second question ? -
Use of makit chart for multiple values against month
Hi all,
here is my test data:
var testDate = { mycollection : [ {Consumption : 200, Consumption1 : 170, ReadingDateTime: February},
{Consumption : 300, Consumption1 : 170, ReadingDateTime: March},
{Consumption : 200, Consumption1 : 130, ReadingDateTime: April},
{Consumption : 200, Consumption1 : 230, ReadingDateTime: May},
{Consumption : 200, Consumption1 : 270, ReadingDateTime: June},
{Consumption : 200, Consumption1 : 200, ReadingDateTime: July},
In this consumption is for present year and consumption 1 is for previous year.
I want to implement both the values against the month using makit column charts:
var oChartj = new sap.makit.Chart({
height: "80%",
width: "100%",
showRangeSelector :false,
primaryColorPalette:["#18458D"],
category : new sap.makit.Category({ column : "month" }),
values : [new sap.makit.Value({ expression : "consumption"})]
var jsonModel = new sap.ui.model.json.JSONModel();
jsonModel.setData(testData);
oChartj.addColumn(new sap.makit.Column({name:"month", value:"{ReadingDateTime}"}));
oChartj.addColumn(new sap.makit.Column({name:"consumption", value:"{Consumption}"}));
oChartj.setModel(jsonModel);
oChartj.bindRows("/mycollection");
in this way i am able to print the data as consumption against month, I need to add consumption1 also.
How to do this?
Regards,
ArunHi All,
I was able to do the same with the help of series property in makit charts.
series : new sap.makit.Series({ column : "year" }),
In our test data we need to create the data's based on this value, for example if we are plotting consumption against month then the year should be a differentiating quantity within the test data.
So that the graph will iterate for that and plot two values for the same month.
Regards,
Arun -
Line chart to plot count of 2 date fields against calendar month
Post Author: springle
CA Forum: Charts and Graphs
I would like to create a line chart with 2 lines. I would like the x axis to be a calendar month. I would like the y axis to be the count of a date field for that month. I would like 2 lines, one the the count of applications recieved in a month and the other to be the number of shipments in a month. I can make a chart to plot one or the other but not both on one chart.So in summary I want of a count of date1 and a count of date2 by calendar month in one line chart.Thanks in advance,ScottPost Author: springle
CA Forum: Charts and Graphs
Thanks for the reply but I am afraid this does not solve my problem. Your proposal make the month count of Date1 records in the fields and the count of Date2 in the month of date1 I am try to graph...In the month of Jan: 56 apps and 49 deliveriesIn the month of Feb: 76 apps and 79 deliveriesIn the month of Feb: 86 apps and 69 deliveriesThe change on date cannot be either app date or del date. It needs to be independent from a calendar timeline. Scott -
SAP UI5 charts sap.viz OR sap.makit?
Hi All,
Just wanted to know which one is preferable / suggested for implementing charts for mobiles using SAP UI5 ? sap.viz or sap.makit?
I know that the VIZ charting library (sap.viz) relies on the open source component D3 which in turn relies on the availability of Scalable Vector Graphics (SVG). As SVG is not supported by IE8 and not fully supported by FF ESR, the VIZ charting library is also not supported on those browsers.
With this point can we say that it it better to go with sap.makit?
Please advice.
ThanksHi,
I'd recommend to use sap.viz if possible. It is the one that has development focus and it now also works on touch devices.
For IE8 there seem to be compatibility libraries, google for them.
(e.g. javascript - D3 IE8 Compatibility? - Stack Overflow and Home · mbostock/d3 Wiki · GitHub) https://github.com/shawnbot/aight might be the solution for IE8.
Regards
Andreas -
How do you make your data into a chart?
How do you make your data into a chart?
Dick,
Your table should look like this:
You're looking at 1 Header Row and 1 Header Column. Headers are shaded by default. Adding a shading to a regular column doesn't make it a header. Use the Table Inspector.
When you Select the data and Insert a Table, you will get this:
Got it?
Jerry -
Com.sap.dictionary.ccts.Date Issue
I am not able to find com.sap.dictionary.ccts.Date under my local dictionary>Data type>simple type.
please tell me what to do.
SriramHi Sriram
If you are not able to find then you can create the simple type then it will available in the dictionary
Simple type name: Date
Simple type package: com.sap.dictionary.ccts.Date
Best Regards
Arun Jaiswal -
Hi,
In Excel 2007, I have a pie chart on sheet 1. I want to make a copy of the pie chart from sheet 1 and past into sheet 2, and change the table data in sheet 2 to get new chart recalculated based on new table values in sheet 2.
However, the chart in sheet 2 is still pointing to the table data in sheet 1.
All the cells in sheet 1 have relative cells.
Please advise.
Thanks - BijanHello Wind,
As teylyn suggested:
"An Excel chart is hard-wired to its data source. You can copy and paste a chart to a different sheet and it will still refer to the initial source data."
So I did create the template and used in my 2nd tab which worked perfectly. However, I had an issue with merged cells which I am using for my data, and tylyn suggested that I provide the excel file that I am working with, and I did.
So now I need help as how to make merged cells work when I try to create a pie chart from template based on new data (which reside in mergerd cells).
P.S. I cannot resize my cells to make the data and labels fit into one call, so I have to have merged cells.
Thanks
Bijan -
How to present SAP R/3 data in SQL Server 2005 Reporting service?
Our company is using SharePoint Portal Server 2003 as our intranet. We are also using SAP R/3 4.6C to run their business. There are huge amount of important data in SAP database. There ere are business needs to present SAP data on SharePoint pages which are easier and more friendly to be accessed by users.
The top concern for IT people to meet this challenge is DO NOT CHANGE/UPGRADE THE EXISTING SAP SYSTEM which is so far run smoothly and stably. We cannot accept any risk to make big changes on SAP. and now we want to adopt the Microsoft SQLServer 2005 BI Solution. the most challenge is the ETL part.how to extract the data from SAP R/3 Data base to the SQL Server Data warehouse?
any suggestion or comments is welcome!Hi
1.if you use web templates you can post the URL in share
point very easily.
any web developer will do that for you in 2 min.
2.this is a more chalanging issue.
the main issue is exacly as you defined it - the ETL.
the main advantage of BW over most BI tools is its
connectivity to SAP R3 and CRM.
But still there are many way's to extract data out
of any SAP sys and in R3 the data model makes it quite
easy.
In CRM its much more complicated because of the much
more complex Data Model.
Here are a few way's to extract data from SAP:
- olap bapi
http://help.sap.com/saphelp_bw33/helpdata/en/64/9b8f3c855f0454e10000000a11405a/frameset.htm
- odbo - vb/.net/c sharp
'connecting to sap bw using vb and ado md'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee19e9c7-0301-0010-8f84-97e3f6d7b5a6
'connecting to sap bw with excel and odbo'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a06a51f3-0201-0010-8591-b742cfafd267
'odbo'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7f88b390-0201-0010-ae94-fdfd42b13407
'sap .net connector' (seems old version)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb4dc990-0201-0010-429a-bf43852a6895
.net connector
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5a04426d-0601-0010-5e99-aeea1cd4aa81
'Access SAP BW ODS BAPI Using C-Sharp and SAP .NET Connector 2.0' doc can be download here
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/12f6d390-0201-0010-e18d-cdb4554a9e75
Reg's
Edan -
Setting valueAxis for makit chart in XML view
Dear Experts,
I am trying to set a valueAxis limit on value 0,5.
My XML looks like this. I couldnt add valueAxis in ma:Chart successfully.
<ma:Chart id="idChart" height="100%" width="100%" type="Line"
rows="{/entries}" showRangeSelector="true" showTableView="false"
showTotalValue="false">
<ma:category>
<ma:Category column="date" displayName="Date" />
</ma:category>
<ma:values>
<ma:Value expression="value" displayName="Value" type="number"/>
</ma:values>
<ma:rows>
<ma:Row>
<ma:cells>
<ma:Column name="date" value="{date}" />
<ma:Column name="value" value="{value}"
type="number" />
</ma:cells>
</ma:Row>
</ma:rows>
<ma:columns>
<ma:Column name="date" value="{date}" />
<ma:Column name="value" value="{value}" type="number" />
</ma:columns>
</ma:Chart>
The error was: Uncaught Error: valueAxis property must be of type sap.makit.ValueAxis
Basically I cant create a new instance of ValueAxis in XML.
I tried in the controller js something like this:
var oChart = this.getView().byId("idChart");
oChart.valueAxis = new sap.makit.ValueAxis({min : "0.5"});
This also didnt work.
So I have two questions:
1.) How can I set valueAxis in XML view staticly?
2.) How can I set valueAxis in controller dynamicly according to the values I get from my json service.
Thanks for any help!
Regards,
KorayTry doing,
oChart.setValueAxis(new sap.makit.ValueAxis({min : "0.5"})); -
How to make CRM data sources for delta capability?
Hi All,
I know that the CRM data sources 0CRM_SALES_ACT_1, 0CRM_QUOTATION_I, 0CRM_SALES_ORDER_I have delta capability.
At present we are doing full loads daily but it has got some performance issues.So we are thinking to make these as delta loads.
Already some one has made a trail to make delta loads but not successful for some unknown reasons.
Could you please suggest me the steps to make these data sources delta capable both in CRM and BW systems?
As this is urgent...Please suggest ASAP.Hi
Go thorugh Below the note: 692195
Summary
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT,CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE,CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP,CRM_ORD_LP,CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Gotothe record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.
Thank you,
DST -
Editing colors of Keynote chart data series
I am attempting to edit a Keynote chart (Scatter plot) with 3 data series. I selected the first Chart option which plots the data by color (Blue, red, white). I do not see an option to adjust or change the default colors. In the "Edit Chart Data" dialog, the series colors appear at the column head but there is no apparent way to change the default color. The white data series wouldn't be so bad except that the background of the chart is also white.
A pie chart shows the proportions that make up the total, therefore what your chart actually shows is a $150 transaction with $50 profit.
The definition of profit is: total price less expenses, then the pie chart should show:
Profit in a $100 sale -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.
Maybe you are looking for
-
Smb was working under 10.9.1. Now smb and usning the finder I get "connection failed". Both of my NAS are not out when i am using my mac book pro thru the wifi connection. Is any one else have the same problem?
-
Has anybody had compatibility issues with Leopard and their scanners?
I recently installed Leopard on my G5. I'm still using Photoshop CS2 and so far no problems. Until today. I have a Epson Perfection 2450 scanner and today I went to scan some old photos. At first blush, no problem. I put in a second photo. Nothing. I
-
Please suggest this how to rectified
Sale for ETAM under head "Sales _ retail(net)" has got uploaded in "sales on Approval" Sale for "Instituional Sales" has got uploaded in "sales-Retail(net)". Please suggest as to how the same can be rectified. very urgent Thank you Anil
-
using time capusle easily as a wireless router for my pc and macbook. time machine works perfectly as my back up for my mac. is there a way to back up any of my data from my pc to time capsule, wired or wirelessly (preferred)?
-
Demo License for 10.5?
I've upgraded from 8.6 to 10.5 and was hoping to use a demo license while waiting for the 10.5 NFR to become available. There is a file on the disc called 100_pre_demo.lic, but when trying to use this, it gives a lot of errors about invalid MAC addre