SAP management console doesnt show any instances

Hi,
I installed CE recently and it seemed to be working fine. But today I have been running into trouble with the SAP management console. When I open the SAP management console it shows no instances and is empty. I tried to start the server from SAP Netweaver Composition Environment 7.1 > Application server J01 (CE1) > Start Application Server and it fails also giving me this message
===================================================
============== Starting System CE1 ================
===================================================
=============== Starting database instance ...
>>The requested service has already been started.
>>More help is available by typing NET HELPMSG 2182.
>>The MaxDB Database Starter, Version 7.6.02.09
>>Copyright 2000-2007 by SAP AG
>>OK
>>============== Starting central services instance ...
>>03.07.2007 10:28:20
>>Start
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>03.07.2007 10:28:20
>>StartWait
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>============== Start operation failed !
>>Press any key to continue . . .
And surprisingly I am not able to see any logs for today, The last I can view them for is when I tried to start the application yesterday.
I also tried to go through the composition tool set up again where it could lead me to a screen to start the server , but had no luck , it didnot give me any information about the CE instances at all.
Any help in this regard would be really appreciated it.
Thanks so much
Regards
Roopa

Hi Roopa,
Follow this...
Execute sapstartsrv.exe from one of the following paths
fill with your system details, select your START profile
from \usr\sap\<SID>\PROFILE\START*, use your Service user and password (your as <hostname>\SAPService<Sid>)
\usr\sap\<sid>\SYS\exe\uc\NTI386
\usr\sap\<SID>\SYS\exe\run
Now Check MMC
Thanks & Regards,
Venkat.
Reward points if useful

Similar Messages

SAP management console not showing AS java

Hello all,
I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
In the abap instance node I was able to see an entry for "AS java" which was whowing two process (SDM and another one...).
I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
How can I get SAP management console show "AS java" ????
Thank you
Jean

Hi Jean,
Start Services.msc from run prompt (if this is windows based installation)
and look for <SID>services, where <SID> is your instance name..
Please do the following and let me know if this of any success
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj

SAP Managment Console

I installed SAP EP SP9 sneak preview version.
but while accessing SAP Managment console it shows error like "Snap-in failed to intilize
Name: Sap system manager
CLSID:{633547EE-A302-11D1-AE59-080009B07DBB}"
Reply Me at:[email protected]

HI,
Try uninstalling GUI.
Regards,
Magham.

Cannot start BW or HANA instances in SAP Management console

Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

SAP Management Console and Services

Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
Corinne

Corinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

Management Console No Show

I just installed JRun 4 on my PowerBook (OS X 10.4.6) and I
can't get the Management Console to show up in any of my browsers
(Safari, Camino). The JRun favicon appears on the address line but
the page is blank.
Any suggestions?

Hi,
If R3trans finished (0012), then chek the TRANS.log file, for further analyse.
Also check the parameters with sappfpar, this tool can be used for checking the profiles after changes and before restarting the SAP system, and then analyse that whether any parameter has to be modify accordingly.
Thanks and regards
Shaibaz

Restarting J2EE server nodes from Developer Studio Vs SAP Management Consol

Hi,
What makes the difference between restarting server nodes from Dev Studio and SAP Management console.
Please let me know if any documents related to this.
Thanks

Thanks for your quick reply.
I observed that options for restarting services from Dev Studio are disabled.
Could you please let me know where we need to configure to enable these options when right click on server instances.
Thanks

Problem with SAP Management console

Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
Thanks.
Abdul Hakim

I have the same problem ???
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    214
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\Ibo-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibo-PC
M pid        2972
M
M kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2972) [dpxxdisp.c   1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F9A0050, size: 7163600)
M DpShMCreate: allocated sys_adm at 000000000F9A0060
M DpShMCreate: allocated wp_adm_list at 000000000F9A3070
M DpShMCreate: allocated wp_adm at 000000000F9A3260
M DpShMCreate: allocated tm_adm_list at 000000000F9AAE40
M DpShMCreate: allocated tm_adm at 000000000F9AAE90
M DpShMCreate: allocated wp_ca_adm at 000000000FEEDDA0
M DpShMCreate: allocated appc_ca_adm at 000000000FEFD7B0
M DpShMCreate: allocated comm_adm at 000000000FF0D1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001005F060
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001005F110
M DpShMCreate: allocated j2ee_adm at 000000001005F150
M DpShMCreate: allocated ca_info at 00000000100600D0
M DpShMCreate: allocated wall_adm at 0000000010060160
M DpCommAttachTable: attached comm table (header=000000000FF0D1C0/ft=000000000FF0D1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M rdisp/thsend_mode : -1 -> 0
M ThInit: initializing DIA work process W0
M
M Thu May 29 07:17:58 2014
M ThInit: running on host Ibo-PC
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.212)
C
C DBSDBSLIB : version 720.00, patch 0.212 (Make PL 0.214)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.212) Call TH callback after cancel (note 1692560)
C    (0.210) Init length of tablename for describe (note 1678130)
C    (0.200) Take care of warnings during database connect (note 1600066)
C    (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C    (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C    (0.103) Close all lob locators at end of the transaction (note 1626591)
C    (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C    (0.098) Use filesystem counter for R3szchk (note 1606260)
C    (0.092) Secondary connection to HANA (note 1481256)
C    (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C
C
C Loading SQLDBC client runtime ...
C
C Thu May 29 07:18:00 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C
C Thu May 29 07:18:01 2014
C SQLDBC SDK     : SQLDBC.H 7.8.2    BUILD 028-121-245-008
C SQLDBC Runtime : libSQLDBC 7.8.2    BUILD 028-121-245-008
C SQLDBC client runtime is MaxDB 7.8.2.028 CL 245008
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM          : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.02   Build 028-121-245-008
C Database release is SAP DB 7.8.02.028
C INFO : Database 'NSP' instance is running on 'ibo-pc'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C DB max. statement length      : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: ibo-pc-NSP, since=20140529071801, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf

Nothin visible under SAP Management console\content root

Hi,
I have installed 2004 sneek preview...It was working fine...But in the last 2 days the IP of the computer in which it was installed changed twice...and now nothing is visible under SAP Management Console->content root...
Could u tell me what could have happened to the system...and a possible way to fix it??
Regards
Krishna

Hi,
1) Goto usr\sap\SID\SYS\exe\run\sapstartsrv.exe
2) Click on sapstartsrv.exe
Specify SID, Instance number, sap profile path and click on ok.
Then you can be able to see instance details in MMC
regards,
kanthi

Sap Management Console tool (NSP is in yellow - dispatcher stopped status)

I have installed SAP ABAP Netweaver 7.03 trial version. I was able to log in through sap logon till day before yesterday. Today When i open sap management console, NSP appears in green initially and then turning to yellow completely. Process List status shows (Disp+Work.Exe) stopped.
How to make NSP to green flag.

Hi boss, thanks for your help.....
could u please guide me how can i check database is up and running or not....
one thing, i want to tell you, when i was installation SAP, after oracle installation, i didnot load the oracle patch...becuase when i clicked on that patch, patch itself show error "Data error or corupted"... is it reason also for database which is not running. somebody told me ,,not necessary to upload the patch..anyway, if you have a patch,,please send me....
Oracle version is: oracle 8.1.7
please , i will really gratuful to you..also guide me , how can i check the database is running or not..

SAP Management console SID missing

Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, Ganesh

Hi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address          Foreign Address        State
TCP    saptest:1031            saptest:1032            ESTABLISHED
TCP    saptest:1032            saptest:1031            ESTABLISHED
TCP    saptest:1424            saptest:1425            ESTABLISHED
TCP    saptest:1425            saptest:1424            ESTABLISHED
TCP    saptest:1426            saptest:5939            ESTABLISHED
TCP    saptest:5939            saptest:1426            ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    saptest:http            saptest:0               LISTENING       1420
TCP    saptest:epmap           saptest:0               LISTENING       680
TCP    saptest:https           saptest:0               LISTENING       1420
TCP    saptest:microsoft-ds    saptest:0               LISTENING       4
TCP    saptest:1025            saptest:0               LISTENING       432
TCP    saptest:1527            saptest:0               LISTENING       1228
TCP    saptest:5938            saptest:0               LISTENING       1420
TCP    saptest:50113           saptest:0               LISTENING       3036
TCP    saptest:netbios-ssn     saptest:0               LISTENING       4
TCP    saptest:1026            saptest:0               LISTENING       1228
TCP    saptest:1031            saptest:1032            ESTABLISHED     1420
TCP    saptest:1032            saptest:1031            ESTABLISHED     1420
TCP    saptest:1424            saptest:1425            ESTABLISHED     2804
TCP    saptest:1425            saptest:1424            ESTABLISHED     2804
TCP    saptest:1426            saptest:5939            ESTABLISHED     2804
TCP    saptest:5939            saptest:0               LISTENING       1420
TCP    saptest:5939            saptest:1426            ESTABLISHED     1420
UDP    saptest:microsoft-ds    :                                    4
UDP    saptest:isakmp          :                                    432
UDP    saptest:ipsec-msft      :                                    432
UDP    saptest:ntp             :                                    792
UDP    saptest:netbios-ns      :                                    4
UDP    saptest:netbios-dgm     :                                    4
UDP    saptest:ntp             :                                    792
UDP    saptest:1030            :                                    792
Thanks

SAP Management Console as part of Netweaver 7.0

Hi Colleagues,
We are running SAP Netweaver 7.0 with Unix and we have detected that
we have a security issue if we leave open the connection to the SAP
Management Console via web (http://<host>:5<instNum>13).
I have been looking for an alternative to disable the access to the
SAP MC via web without having to close the port 50013, but I havent
found any alternative for that.
Could you please advise me if it is posible to stop the SAP MC or to
disable this application via web?
Best Regards!

Sorry , but that note is not clear and does not state how to disbale the SAP MC.
We need this as part of the security advise.
My env is windows and Portal is NW 701.
Please advise.
Regards,
Chaya

SAP management console doesnt show any instances

Similar Messages

Maybe you are looking for