SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

Similar Messages

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

'MMC cannot open the file C:\Windows\SAPMMC.MSC'

Hi
When I try and run SAPMMC on the desk top I get the error :
'MMC cannot open the file C:\Windows\SAPMMC.MSC'
this is because the file does not exists, is not an MMC console, or was created by a later version of the MMC'
I have full permissions on this server, has anyone seen this error before?
The file C:\Windows\SAPMMC.MSC does exist, infact there is a .1, .2, .3 and .4 version in C:\Windows.
Thanks for any help.

Hi,
Check out following link and notes inside it.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=936273]
Hope this helps.
Manoj Chintawar

Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PM

Has the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Error:Cannot open the file c:\windows\sapmmc.msc

Hi Folks,
I have been using SAP IDES ECC 6.2 for a while and now all of a sudden encountered a problem CANNOT OPEN THE FILE C:\WINDOWS\SAPMMC.MSC.
I am a technical consultant and i know nothing about basis and sap installations.
Is this error so fatal? How can i fix the problem..
Thanks in advance.
Ranjith kumar.

Hi
Ranjith
Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Regards
Bhaskar

MMC cannot open the file msisa.msc

Hi, I've been dealing with this problema for a few hours and been searching all over to find no solution to it.
I have installed a TMG 2010 SP2 server on a Windows Server 2008 R2 SP1 Server.
The installation goes OK, I'm installing first the EMS server. When I try to open the console I get the following Error:
I have already checked the MMC versión on the OS is 3.0.
I've already reinstalled quite a few times.
I have disabled the antivirus and even uninstalled it from the server.
When I try to open the TMG Console by first opening the mmc and adding the snap-in, I get the console tree but no content anywhere else.
The installation files have already SP1 and SP2 with the latest update rollup.
The computer is domain joined.
The user account is a local admin.
The server had the latest updates installed, so I tried uninstalling some of them, even the IE11 that was installed, but still got the same problem.
I also have another server and getting the same problem.
I have used those same installation files before and didn't get this issues.
Any ideas on why this is happening?
Thanks for your help!
Eduardo Rojas

Hi,
You may try the steps in the following threads.
http://social.technet.microsoft.com/Forums/en-US/8d9546bf-df66-49f9-8351-a92ccff7319a/mmc-cannot-open-the-file-cwindowssystem32p3servermsc?forum=winserverManagement
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

QuickTime cannot open the file: "trampoline.mov"

I just got a new 2.1 GHz Power PC G5 iMac with 2.5 GB RAM, 500 GB HD running Tiger 10.4.5. I used migration assistant to transfer over all my apps. etc. from my PowerBook. I tried to open Quicktime (version 7.0.1) and I got this error "QuickTime cannot open the file: "trampoline.mov". I have no idea what this means or what it is referring to. I have no knowledge of the file "trampoline.mov". I am also getting "Can not build a preview because of a problem w/Quicktime" when I try to save a document in Photoshop CS2. It appears to save the document, and the error disappears. Once, however, I left the error message up on the screen for a few minutes, and I got a "generating preview" message that appeared underneath the error. It got stuck roughly in the middle of generating the preview, and I had to force quit the application. I would appreciate any help or advice on fixing this problem. Thank you, Regina
2.1 GHz Power PC G5 iMac with 2.5 GB RAM, 500 GB HD Mac OS X (10.4.5)

Upgrade QuickTime to version 7.0.4 and your troubles may disappear.
The trampoline.mov file is part of the QuickTime Player app and is used to "bounce" you to the Internet. Remove the check mark to "Show Content Guide" when QuickTime Player is launched (Player preferences).
I don't know why you're getting a QT error when using Photoshop. Check the Adobe Site for updates.
I suspect some settings got mucked up during the migration from your Powerbook.

HtmlToPdf Error (ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password

Hello,
We have LiveCycle 8.x with jBoss. It works ok. The server (Windows 2003) can browses to the link, but the link gives error in the LiveCycle Console Admministrator when I use the "HtmlToPdf" service.
JBoss service is started like Local System. I don´t know what to do
This is the error trace:
2012-02-06 10:32:46,881 INFO [com.adobe.service.ProcessResource] BMC508: Service HtmlToPdfSvc: Native process PID = 4708
2012-02-06 10:32:58,426 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-028-http://repsolnet/pubs/es_es/home/home.aspx: Job Completion Status: Failed
2012-02-06 10:32:58,428 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-025-http://repsolnet/pubs/es_es/home/home.aspx: Time Job Completed: 2/6/12 10:32
AM for job = 503c34-7d0386-30aeb9-b17f60-2885dd-9ed84a
2012-02-06 10:32:58,428 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-030-http://repsolnet/pubs/es_es/home/home.aspx: Waiting time in queue: 0 ms for
job = 503c34-7d0386-30aeb9-b17f60-2885dd-9ed84a
2012-02-06 10:32:58,429 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-026-http://repsolnet/pubs/es_es/home/home.aspx: Time of Job Execution: 12,682 ms
for job = 503c34-7d0386-30aeb9-b17f60-2885dd-9ed84a
2012-02-06 10:32:58,430 ERROR [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-000-
Error message from the primary converter:
ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password protected or a corrupt PDF document.
Error message from the fallback converter:
ALC-PDG-052-020-HTML Converter could not convert the given file or URL.
2012-02-06 10:32:58,447 ERROR [com.adobe.workflow.AWS] An exception was thrown with name com.adobe.livecycle.generatepdf.client.ConversionException message:
Error message from the primary converter:
ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password protected or a corrupt PDF document.
Error message from the fallback converter:
ALC-PDG-052-020-HTML Converter could not convert the given file or URL. while invoking service GeneratePDFService and operation HtmlToPDF2 and no fault
routes were found to be configured.
2012-02-06 10:32:58,447 ERROR [com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker] An exception was thrown with name
com.adobe.livecycle.generatepdf.client.ConversionException message:
Error message from the primary converter:
ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password protected or a corrupt PDF document.
Error message from the fallback converter:
ALC-PDG-052-020-HTML Converter could not convert the given file or URL. while invoking service GeneratePDFService and operation HtmlToPDF2 and no fault
routes were found to be configured.
2012-02-06 10:32:58,460 ERROR [com.adobe.workflow.AWS] An exception was thrown with name com.adobe.livecycle.generatepdf.client.ConversionException message:
Error message from the primary converter:
ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password protected or a corrupt PDF document.
Error message from the fallback converter:
ALC-PDG-052-020-HTML Converter could not convert the given file or URL. while invoking service GeneratePDFService and operation HtmlToPDF2 and no fault
routes were found to be configured.
Thanks for help me.

What happens if you try converting the page using Acrobat? Is this a public page or internal, if public can you provide the url.

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

错误"Cannot open the file due to an unknown error. (FRM0007)"

在XI3.0,当打开3层deski的时候，得到下面的错误
"Cannot open the file due to an unknown error. (FRM0007)"
-所有的deski文件都打不开
-用2层deski打开没有问题
-发生在某些特定的UserID上
-目前在两台终端机上发生
下面是进行拖拽部分的log文件，或许有帮助
<busobj_2812_xxx>
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015
Edited by: Emily Yang on Mar 20, 2009 2:08 AM

尝试一下如下操作：
1.在有问题的DeskI客户端打开注册表编辑器，开始菜单->运行->RegEdit
2.到HKEY_CURRENT_USER< Software< BusinessObjects<Suite 11.5<Business Objects下
3.选择user preferences并删除

Error opening CHM file (Cannot open the file: mk:@MSITStore)

Hi,
I'm getting an error opening a CHM file (Cannot open the file: mk:@MSITStore). I have tried the following solutions, but neither of them worked:
Deleted the CPD file, reopened the project, and recompiled.
Ran MJ's Diagnostics report and recompiled.
I'm using RH10 and Windows 7.
I have lots of other projects, and none of them result in this error. I can't think of anything else to fix it. I have seen a few threads on this issue, but none of them have lead me to any solutions that work for me. I'm hoping that starting a new thread will provide visibility and allow someone to share a solution.
Thanks,
Amy

---UPDATE---
I was able to fix this by generating the WebHelp and then regenerating the CHM file. I'm not sure why this worked, but it did.
However, I'm also seeing this issue with a different project now, and this "fix" isn't fixing that one. So I still need an actual solution. At least for now, the first project is "fixed."
Thanks!
Amy

Cannot open the file due to an unknown error. (FRM0007)

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on some specific userID.
-It happens on tow computers
The following is log that may be helpful.
<busobj_2812_xxx>
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
It seems to be windows profile related issue could you please try to delete the user preferences under the registries for which you are getting the issue for the particular users.
Note: The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry.For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
1. Go to start programs->run->RegEdit.
2. Then go to HKEY_CURRENT_USER< Software< BusinessObjects<Suite 11.5<Business Objects.
3. Select the user preferences and delete the same.
Regards,
Sarbhjeet Kaur

Error"Cannot open the file due to an unknown error. (FRM0007)" in XI3.0

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on two computers
-It happens on some specific userID,and only happens when two deski are opened, one is open by specific userA,the the other is opened by userB or both are opened by userA
it is、
　DeskI - opened by UserA
　DeskI - opened by UserA
or、
　DeskI - opened by UserA　
DeskI - opened by UserB
The following is log that may be helpful.
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
Following solution might help you to resolve the issue.
1.You create your Deski report.
2.Save as the report (with or without 'Save for all users'- makes little difference at his stage).
3.Export the document to the repository.
4.Save as the report once again with the option 'Save for all users'(overwrite the copy that already exists on the local machine).
5.Log into Info view and delete the report.
6.Log back into Desktop Intelligence and try to open the report.
Regards,
Sarbhjeet Kaur

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Similar Messages

Maybe you are looking for