SAP Management Console for 64 Bit systems?
Hello everybody!
I want to install the SAP NetWeaver 7.01 ABAP Trial Version, but I have a problem with the SAP Management Console.
My operation system is Vista (64 Bit) and the following error message is being displayed when I want to install the MMC:
"This installation does not support 64 Bit Windows Operation systems. Please use the corresponding 64 Bit installation package.
Is there any 64 Bit installation package like that available?
Well, I've read in another post, that the installer and the trial system work for 32-bit systems only.
Is the trial going to be work for 64-bit systems anytime?
Edited by: Daniel Hellner on Oct 14, 2008 5:19 PM
Similar Messages
-
Error in starting SAP Systems at SAP Management Console
Hi,
I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1" run SAP management Console->SAP Systems-> start .
after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error follow as:
error messages:
Start failed:2
Permission denied
I need help,
best regardsHi
You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
User must be <sid>adm or a member of the Local or Domain Administrators
Regards
Juan -
SAP Management Console - Remote System Management
When I fire up my SAP Management Console (mmc plugin), I can see my locally installed instance for starting and stopping. Can I use the plugin to manage a remote machine?
Thanks!This machine isn't running R/3, it is only running the Java application server. There is no System > Status which I can find.
When I open the SAPMMC on my local machine, it has the tree:
Console Root
SAP Systems
J2E
bknitter-dt
bknitter-dt 1
bknitter-dt 0
I'm assuming in my case, if someone were to manage this remotely, they would simply put in "bknitter-dt 00" and "bknitter-dt 01" ??
Thanks for the confirmation!
Message was edited by: Brandon Knitter -
Starting sap-system from MS-DOS without SAP Management Console?
Hi,
I want to start the sap-system from MS-DOS without using SAP Management Console.
Is this possible?
Which file must be started?
Thanks for your help.
Regards
StefanHi Stefan!
Try this:
startsap name=<SID> nr=<InstNo> SAPDIAHOST=<host>
Regards,
Carsten -
Problem with SAP Management console
Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
Thanks.
Abdul HakimI have the same problem ???
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 214
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\Ibo-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibo-PC
M pid 2972
M
M kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2972) [dpxxdisp.c 1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F9A0050, size: 7163600)
M DpShMCreate: allocated sys_adm at 000000000F9A0060
M DpShMCreate: allocated wp_adm_list at 000000000F9A3070
M DpShMCreate: allocated wp_adm at 000000000F9A3260
M DpShMCreate: allocated tm_adm_list at 000000000F9AAE40
M DpShMCreate: allocated tm_adm at 000000000F9AAE90
M DpShMCreate: allocated wp_ca_adm at 000000000FEEDDA0
M DpShMCreate: allocated appc_ca_adm at 000000000FEFD7B0
M DpShMCreate: allocated comm_adm at 000000000FF0D1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001005F060
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001005F110
M DpShMCreate: allocated j2ee_adm at 000000001005F150
M DpShMCreate: allocated ca_info at 00000000100600D0
M DpShMCreate: allocated wall_adm at 0000000010060160
M DpCommAttachTable: attached comm table (header=000000000FF0D1C0/ft=000000000FF0D1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M rdisp/thsend_mode : -1 -> 0
M ThInit: initializing DIA work process W0
M
M Thu May 29 07:17:58 2014
M ThInit: running on host Ibo-PC
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.212)
C
C DBSDBSLIB : version 720.00, patch 0.212 (Make PL 0.214)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.212) Call TH callback after cancel (note 1692560)
C (0.210) Init length of tablename for describe (note 1678130)
C (0.200) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C
C
C Loading SQLDBC client runtime ...
C
C Thu May 29 07:18:00 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C
C Thu May 29 07:18:01 2014
C SQLDBC SDK : SQLDBC.H 7.8.2 BUILD 028-121-245-008
C SQLDBC Runtime : libSQLDBC 7.8.2 BUILD 028-121-245-008
C SQLDBC client runtime is MaxDB 7.8.2.028 CL 245008
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.02 Build 028-121-245-008
C Database release is SAP DB 7.8.02.028
C INFO : Database 'NSP' instance is running on 'ibo-pc'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: ibo-pc-NSP, since=20140529071801, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf -
Problem with SAP Management console 'yellow is not changing to green'
Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
I also tried Some suggestions posted before by using cmd ....Please help me out in a step by step manner.
Thanks.trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 27 21:12:36 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid ECC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2900
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2900) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Aug 27 21:12:37 2014
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05D30040
M DpShMCreate: allocated wp_adm at 05D31E40
M DpShMCreate: allocated tm_adm_list at 05D365C0
M DpShMCreate: allocated tm_adm at 05D365F0
M DpShMCreate: allocated wp_ca_adm at 06105890
M DpShMCreate: allocated appc_ca_adm at 0610B650
M DpShMCreate: allocated comm_adm at 0610D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0618E450
M DpShMCreate: allocated gw_adm at 0618E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0618E4C0
M DpShMCreate: allocated wall_adm at 0618E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 27 21:12:38 2014
M ThInit: running on host gcecc62
M
M Wed Aug 27 21:12:39 2014
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS00\exe to Path.
C
C Wed Aug 27 21:12:40 2014
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C
C Wed Aug 27 21:12:41 2014
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
B
B Wed Aug 27 21:12:42 2014
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server gcecc62_ECC_00 on host gcecc62 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Aug 27 21:12:42 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2900) [dpnttool.c 327]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
Good Bye .....
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2524] Wed Aug 27 21:12:28 2014
[Thr 2524] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 2516
[Thr 2524] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2516) [msxxserv.c 1824]
[Thr 2524] Wed Aug 27 21:12:29 2014
[Thr 2524] load acl file = D:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 2524] MsGetOwnIpAddr: my host addresses are :
[Thr 2524] 1 : [192.168.10.1] gcecc62 (HOSTNAME)
[Thr 2524] 2 : [127.0.0.1] gcecc62 (LOCALHOST)
[Thr 2524] 3 : [192.168.10.11] gcecc62 (NILIST)
[Thr 2524] MsHttpInit: full qualified hostname = gcecc62
[Thr 2524] HTTP logging is switch off
[Thr 2524] set HTTP state to LISTEN
[Thr 2524] ms/icf_info_server : deleted
[Thr 2524] *** I listen to port sapmsECC (3600) ***
[Thr 2524] *** I listen to internal port 3900 (3900) ***
[Thr 2524] *** HTTP port 8100 state LISTEN ***
[Thr 2524] CUSTOMER KEY: >Z0250905160<
[Thr 2524] Wed Aug 27 21:13:44 2014
[Thr 2524] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gcecc62_ECC_00 [msxxserv.c 4679] -
SAP Management Console : Error : MMC cannot open the file
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP -
Cannot start BW or HANA instances in SAP Management console
Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction. -
SAP Management Console and Services
Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
CorinneCorinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan -
Difference between SAP SLD and SAP Management console
Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
ShailikHi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy. -
SAP management console doesnt show any instances
Hi,
I installed CE recently and it seemed to be working fine. But today I have been running into trouble with the SAP management console. When I open the SAP management console it shows no instances and is empty. I tried to start the server from SAP Netweaver Composition Environment 7.1 > Application server J01 (CE1) > Start Application Server and it fails also giving me this message
===================================================
============== Starting System CE1 ================
===================================================
=============== Starting database instance ...
>>The requested service has already been started.
>>More help is available by typing NET HELPMSG 2182.
>>The MaxDB Database Starter, Version 7.6.02.09
>>Copyright 2000-2007 by SAP AG
>>OK
>>============== Starting central services instance ...
>>03.07.2007 10:28:20
>>Start
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>03.07.2007 10:28:20
>>StartWait
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>============== Start operation failed !
>>Press any key to continue . . .
And surprisingly I am not able to see any logs for today, The last I can view them for is when I tried to start the application yesterday.
I also tried to go through the composition tool set up again where it could lead me to a screen to start the server , but had no luck , it didnot give me any information about the CE instances at all.
Any help in this regard would be really appreciated it.
Thanks so much
Regards
RoopaHi Roopa,
Follow this...
Execute sapstartsrv.exe from one of the following paths
fill with your system details, select your START profile
from \usr\sap\<SID>\PROFILE\START*, use your Service user and password (your as <hostname>\SAPService<Sid>)
\usr\sap\<sid>\SYS\exe\uc\NTI386
\usr\sap\<SID>\SYS\exe\run
Now Check MMC
Thanks & Regards,
Venkat.
Reward points if useful -
SAP management console not showing AS java
Hello all,
I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
In the abap instance node I was able to see an entry for "AS java" which was whowing two process (SDM and another one...).
I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
How can I get SAP management console show "AS java" ????
Thank you
JeanHi Jean,
Start Services.msc from run prompt (if this is windows based installation)
and look for <SID>services, where <SID> is your instance name..
Please do the following and let me know if this of any success
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj -
SAP Management console SID missing
Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, GaneshHi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP saptest:1031 saptest:1032 ESTABLISHED
TCP saptest:1032 saptest:1031 ESTABLISHED
TCP saptest:1424 saptest:1425 ESTABLISHED
TCP saptest:1425 saptest:1424 ESTABLISHED
TCP saptest:1426 saptest:5939 ESTABLISHED
TCP saptest:5939 saptest:1426 ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address Foreign Address State PID
TCP saptest:http saptest:0 LISTENING 1420
TCP saptest:epmap saptest:0 LISTENING 680
TCP saptest:https saptest:0 LISTENING 1420
TCP saptest:microsoft-ds saptest:0 LISTENING 4
TCP saptest:1025 saptest:0 LISTENING 432
TCP saptest:1527 saptest:0 LISTENING 1228
TCP saptest:5938 saptest:0 LISTENING 1420
TCP saptest:50113 saptest:0 LISTENING 3036
TCP saptest:netbios-ssn saptest:0 LISTENING 4
TCP saptest:1026 saptest:0 LISTENING 1228
TCP saptest:1031 saptest:1032 ESTABLISHED 1420
TCP saptest:1032 saptest:1031 ESTABLISHED 1420
TCP saptest:1424 saptest:1425 ESTABLISHED 2804
TCP saptest:1425 saptest:1424 ESTABLISHED 2804
TCP saptest:1426 saptest:5939 ESTABLISHED 2804
TCP saptest:5939 saptest:0 LISTENING 1420
TCP saptest:5939 saptest:1426 ESTABLISHED 1420
UDP saptest:microsoft-ds : 4
UDP saptest:isakmp : 432
UDP saptest:ipsec-msft : 432
UDP saptest:ntp : 792
UDP saptest:netbios-ns : 4
UDP saptest:netbios-dgm : 4
UDP saptest:ntp : 792
UDP saptest:1030 : 792
Thanks -
Unable to find SAP Server in SAP Management Console
Hi
I installed NSP Server in my Windows XP i used to work on this system.
I downloaded 90days licence from SAP site and it is valid upto 20060701.
Today we i try to start NSP Server using SAP Management Console there is server appearing in the tree which is usually appear in left panel.
Could any body help me how retrive the Server in SAP Management Console
Thanks
UmaHi uma
check the following service is running under windows service manager.
control panel->Administrative tool ->services
find the following service
sapnsp_instance number.
this service might be stop. start it.
also check the logon information for service.
now check the sap MMC.
regards,
kaushal -
PI 7.1 Installation - SAP Management Console
Hi Experts,
May I ask how I can restore the list under the SAP Systems in the SAP Management Console?
I have just restarted the system and the list is gone and I can no longer log-in to the server using sap logon.
The PI is installed in windows 2003. Do you think reinstalling PI can fix this?
Your advise is very much appreciated.
Thanks!
Regards,
Lexhi sekhar,
thanks for the info.
i found this one...
Hi
Go to service.msc from run window.Look for the below mentioned services:
1-> SAP<SID>_<NO>
Right click on the service and click on properties.Click on Logon tab. Click on Browse and look for "SAPService<sid> and type the password of SAPService<sid> that has been assigned during the installation.You need to repeat the password.Log off and login <sid>adm. Now SAP MMC console should come up with the tree
Regards,
Satish
and it fixed it!!
regards,
lex
Maybe you are looking for
-
How to 'Stop the Clock' for SLA when in customer action?
Hi Does anyone know if the functionality exists so that when a support message goes into 'customer action' or 'solution proposed' status the SLA stops counting down until the message is put back into 'in process'? The SLA is out of your control when
-
Webservice concepts . Pls help
Hi All, In PI 7.0 in Integration Configuration: we create the WSDL for Sender/Outbound Interface using --- Select Tools --- Define Web Service -- fill all information and send that wsdl to consumer and use soap sender adapter similarly In PI 7.0 in I
-
I am a recent Mac (from PC) convert and have just started getting into iPhoto & have come across a couple of frustrating issues: - is it possible to attach photos to a Hotmail email, ie if in Hotmail, can you locate the photo (like a file) and attach
-
CS does not appear for Track Data in CMS- Sneak Preview
Hello All, i want to create Software Component in CMS and define it in Track Data. Ive created SC like described on: http://help.sap.com/saphelp_nw04/helpdata/en/da/f812d366aa44ad83a30418b34dae1c/frameset.htm but SC does not appear, when i try to add
-
I have perfectly good Internet but I cannot access any web page. On each page it says this for example on Facebook..."Safari cannot connect to the server. Safari can't open the page http://FB...because dafari can't Connect to the server www.FB..."