SAP Management Console security
Not sure if this is the correct section so apologies if not.
Does anyone know how to prevent just anyone using SAP management Console?
For example, if someone downloads it from SAP marketplace onto their PC, they can run it and enter instance info and see what is going on for that instance.
They can look at log files etc.
Is it possible to prevent anyone viewing this info?
I am having the feeling you might want to read sap note [1439348 - Extended security settings for sapstartsrv|https://service.sap.com/sap/support/notes/1439348]
And nobody would have to download mmc from service marketplae, it is much simpler. All you need to do is to call http://<yourserver>:50013
But with the default configuration one cannot stop anything without proper authentication.
Kind regards, Michael
Similar Messages
-
SAP Management console security via HTTP
Hello,
We have just started using the HTTP connection to the SAP MMC via port 5<SysNR>13 and have found that you can connect straight to it without it asking for any authentication.
It does ask if you try to shut anything down and you have to be an administrator on the server as well otherwise it won't do anything, however you can freely look at the logs and other information without entering any passwords.
The Help for this new method of connecting just says how to use it and nothing about how to secure it.
Does anyone know of a way to get it to ask for a userid and password when you first connect to it?
Regards
Garry BayfordThanks, but I'm afraid that only really says how to protect the connection.
What I'd prefer is to have the console ask for a userid and password when you first connect to it.
We've found a profile parameter called service/prtoectedwebmethods that might be suitable as it may allow us to protect the individual items in the console itself. Not ideal but better than the current setup. -
SAP Management Console : Error : MMC cannot open the file
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP -
SAP Management Console as part of Netweaver 7.0
Hi Colleagues,
We are running SAP Netweaver 7.0 with Unix and we have detected that
we have a security issue if we leave open the connection to the SAP
Management Console via web (http://<host>:5<instNum>13).
I have been looking for an alternative to disable the access to the
SAP MC via web without having to close the port 50013, but I havent
found any alternative for that.
Could you please advise me if it is posible to stop the SAP MC or to
disable this application via web?
Best Regards!Sorry , but that note is not clear and does not state how to disbale the SAP MC.
We need this as part of the security advise.
My env is windows and Portal is NW 701.
Please advise.
Regards,
Chaya -
While starting the SAP Management console " SDM" stopped , rest all fine
Hi
When start the SAP Management console, all are runnig in running state
Except "SDM" ? What is the problem ?
What is need to do on this ?
regards
kiran LVSHI,
When i set SDM in integrated mode and say StartServer.sh its givibvng the below error. any idea?
CompilerOracle: exclude
com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude
com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude
com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils
escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude
com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude
com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude
com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/6.4009.00.0000.20040910093614.0000
JStartupFramework is active
Operation mode of SDM in JStartupFramework is "Integrated".
Check if Server is running already.
OK server is not running. Enable SDM Process in JStartupFramework.
Successfully enabled SDM Process in JStartupFramework.
+ The SDM server will be started by the JStartupFramework now. +
Waiting 5 seconds for SDM server to start...
SDM server not up after 5 seconds. Waiting for another 5 seconds.
SDM server not up after 10 seconds. Waiting for another 5 seconds.
SDM server not up after 15 seconds. Waiting for another 5 seconds.
SDM server not up after 595 seconds. Waiting for another 5 seconds.
SDM server not up after 600 seconds. Waiting for another 5 seconds.
ERROR: SDM server startup not finished after 600 seconds. Giving up.
Could not start SDM. Processing error. Return code: 4 -
Services in SAP management console and related window services and process
hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga LaxmiHi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara -
Error in starting SAP Systems at SAP Management Console
Hi,
I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1" run SAP management Console->SAP Systems-> start .
after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error follow as:
error messages:
Start failed:2
Permission denied
I need help,
best regardsHi
You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
User must be <sid>adm or a member of the Local or Domain Administrators
Regards
Juan -
SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Hi ,
Title: SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Iam not able to see the pop up window SAPMC when i run the following in firefox browser but it works fine in my colleague's computer:
http://hostname:5NN13
I tested the same sap system with this address and it works fine - http://hostname:5NN00
Iam sure that something has to be changed in my browser but dont know what. Please help. Thank you.
Regards,
Mohan.Dear krishna,
even if your thread is closed:
If you get this error in firefox you just have to install java plugin.
Please find documentation [here|http://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox].
Best regards,
Alex
Edited by: Alexander Foerster on Dec 2, 2011 12:44 PM -
How to rectify sap management console
hai sap guru's,
sap management console was deleted in my system, how can rectify this problem otherwise we need to install again
thanks & regards
sathish .nhi,
Copy the MMC console from Q/A system and paste it here.
If you are not having sap dll files in system32 folder means copy the same from another and paste it in this system.
Regards
Vijay -
Problem with SAP Management console 'yellow is not changing to green'
Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
I also tried Some suggestions posted before by using cmd ....Please help me out in a step by step manner.
Thanks.trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 27 21:12:36 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid ECC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2900
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2900) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Aug 27 21:12:37 2014
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05D30040
M DpShMCreate: allocated wp_adm at 05D31E40
M DpShMCreate: allocated tm_adm_list at 05D365C0
M DpShMCreate: allocated tm_adm at 05D365F0
M DpShMCreate: allocated wp_ca_adm at 06105890
M DpShMCreate: allocated appc_ca_adm at 0610B650
M DpShMCreate: allocated comm_adm at 0610D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0618E450
M DpShMCreate: allocated gw_adm at 0618E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0618E4C0
M DpShMCreate: allocated wall_adm at 0618E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 27 21:12:38 2014
M ThInit: running on host gcecc62
M
M Wed Aug 27 21:12:39 2014
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS00\exe to Path.
C
C Wed Aug 27 21:12:40 2014
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C
C Wed Aug 27 21:12:41 2014
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
B
B Wed Aug 27 21:12:42 2014
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server gcecc62_ECC_00 on host gcecc62 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Aug 27 21:12:42 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2900) [dpnttool.c 327]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
Good Bye .....
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2524] Wed Aug 27 21:12:28 2014
[Thr 2524] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 2516
[Thr 2524] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2516) [msxxserv.c 1824]
[Thr 2524] Wed Aug 27 21:12:29 2014
[Thr 2524] load acl file = D:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 2524] MsGetOwnIpAddr: my host addresses are :
[Thr 2524] 1 : [192.168.10.1] gcecc62 (HOSTNAME)
[Thr 2524] 2 : [127.0.0.1] gcecc62 (LOCALHOST)
[Thr 2524] 3 : [192.168.10.11] gcecc62 (NILIST)
[Thr 2524] MsHttpInit: full qualified hostname = gcecc62
[Thr 2524] HTTP logging is switch off
[Thr 2524] set HTTP state to LISTEN
[Thr 2524] ms/icf_info_server : deleted
[Thr 2524] *** I listen to port sapmsECC (3600) ***
[Thr 2524] *** I listen to internal port 3900 (3900) ***
[Thr 2524] *** HTTP port 8100 state LISTEN ***
[Thr 2524] CUSTOMER KEY: >Z0250905160<
[Thr 2524] Wed Aug 27 21:13:44 2014
[Thr 2524] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gcecc62_ECC_00 [msxxserv.c 4679] -
Problem with SAP Management console
Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
Thanks.
Abdul HakimI have the same problem ???
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 214
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\Ibo-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibo-PC
M pid 2972
M
M kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2972) [dpxxdisp.c 1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F9A0050, size: 7163600)
M DpShMCreate: allocated sys_adm at 000000000F9A0060
M DpShMCreate: allocated wp_adm_list at 000000000F9A3070
M DpShMCreate: allocated wp_adm at 000000000F9A3260
M DpShMCreate: allocated tm_adm_list at 000000000F9AAE40
M DpShMCreate: allocated tm_adm at 000000000F9AAE90
M DpShMCreate: allocated wp_ca_adm at 000000000FEEDDA0
M DpShMCreate: allocated appc_ca_adm at 000000000FEFD7B0
M DpShMCreate: allocated comm_adm at 000000000FF0D1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001005F060
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001005F110
M DpShMCreate: allocated j2ee_adm at 000000001005F150
M DpShMCreate: allocated ca_info at 00000000100600D0
M DpShMCreate: allocated wall_adm at 0000000010060160
M DpCommAttachTable: attached comm table (header=000000000FF0D1C0/ft=000000000FF0D1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M rdisp/thsend_mode : -1 -> 0
M ThInit: initializing DIA work process W0
M
M Thu May 29 07:17:58 2014
M ThInit: running on host Ibo-PC
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.212)
C
C DBSDBSLIB : version 720.00, patch 0.212 (Make PL 0.214)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.212) Call TH callback after cancel (note 1692560)
C (0.210) Init length of tablename for describe (note 1678130)
C (0.200) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C
C
C Loading SQLDBC client runtime ...
C
C Thu May 29 07:18:00 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C
C Thu May 29 07:18:01 2014
C SQLDBC SDK : SQLDBC.H 7.8.2 BUILD 028-121-245-008
C SQLDBC Runtime : libSQLDBC 7.8.2 BUILD 028-121-245-008
C SQLDBC client runtime is MaxDB 7.8.2.028 CL 245008
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.02 Build 028-121-245-008
C Database release is SAP DB 7.8.02.028
C INFO : Database 'NSP' instance is running on 'ibo-pc'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: ibo-pc-NSP, since=20140529071801, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf -
Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K -
Cannot start BW or HANA instances in SAP Management console
Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction. -
Nothin visible under SAP Management console\content root
Hi,
I have installed 2004 sneek preview...It was working fine...But in the last 2 days the IP of the computer in which it was installed changed twice...and now nothing is visible under SAP Management Console->content root...
Could u tell me what could have happened to the system...and a possible way to fix it??
Regards
KrishnaHi,
1) Goto usr\sap\SID\SYS\exe\run\sapstartsrv.exe
2) Click on sapstartsrv.exe
Specify SID, Instance number, sap profile path and click on ok.
Then you can be able to see instance details in MMC
regards,
kanthi -
SAP Management Console and Services
Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
CorinneCorinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan
Maybe you are looking for
-
How do I delete an entire document in Pages? I've tried and it won't go away! I've used every key word/phrase I can think of to get an answer. Thank you.
-
Anyone got any ideas. Dual G5 OSX10.3.9 Unit has been powered down for five days and unplugged during move (wondering if internal battery could be fault, not changed yet but only 16 months old) Each time I start up, all looks good then 10-20 seconds
-
Actionscript in different frames
Hello. I´m a newbe at Flash but I´m learning it. I´ve got a problem with my flashsite. I´ve made a rss-feed from a tutorial and I´ve got one "list" for the headlines and a "text area" for the new/description. This is all on same frame, but I want it
-
Listener returned message 403 forbidden
Hi, I'm getting this error on almost every page that I have created, the portlets are not displayed. Can anyone help?
-
Searching for SAP certified project manager for project
Please post a response if you know someone who has a BS or BA degree and has: General SAP Functional Knowledge and Experience 8 - 10 years of previous experience as an SAP Project Manager with SAP, an SAP Partner, or large companies doing SAP impleme