SAP MC (management console)

hi all,
we would like to run the sapmc (java based not mmc)
with a fixed configuration.
the default behavior of the MC is to use %USERPROFILE% / .sapmc
as a config file which is not good, i want to run it from a web server with a single config file.
does anyone knows how to do it ?
regards
avishay
Edited by: Avishay Cohen on Jan 10, 2008 8:18 AM

Similar Messages

SAP BPC Management Console

Dear All, I have an installation of SAP BPC 7.0 SP7 Patch 1. On my Dev and Test servers, the Management Console works perfectly (they are both single server installations), but on the multi-server Production environment the web server part is not visible. The SQL, Analysis Services part work well, but I cannot get to see who's online and which aspx 's are active. The only thing that I can see for the web server part is the task manager part. I suspect a security setting or a specific service that is not started, but cannot find anything yet. The Event log on the web/application server only indicates that the WMI service was stopped, but nothing else. Has anybody else experience this kind of behaviour for the Management Console? Or does anybody know exactly which rights and permissions are needed and which services?
Thanks,
Manus Cornelius

If the ODBC logging is working correctly thatu2019s all that should be needed.
The MC reads the log tables to tell whou2019s online. By default it logs to BPCLog in AppServer.
If you open up BPCLog, it looks just like an IIS log.
You can check to see if there are records in the table.
There is a stored procedure in the appserver DB you can run, sp_WhosOnline, which should return data. If thatu2019s not returning data thereu2019s probably an issue with the logs.
Other steps to verify:
1. Make sure there is Login setup in security whose default DB is AppServer. Make sure under User Mapping that it's mapped to AppServer and has the roles of db_owner and public. Verify SQL is set up for Windows and SQL Server Authentication. Restart SQL services.
2. Verify IIS under the Web Site tab, logging is set to ODBC logging. Click the Properties button and make sure the DSN is set to BPC_ManagementDSN, the table is BPCLog, and the username and password are those of the SQL login user you set up before.
3. Make sure IIS Directory Security>Authentication and access control is set to Basic Authentication
4. Set the Application Pool of the virtual directory 'Management Console' is set to BPC_ManagementAP
5. In ODBC Data Source Administrator, click the Configure button with the BPC_ManagementDSN selected. Go through the wizard, verify it is using "SQL Server authentication with login ID and password" and input the username and password for your SQL login user.
Good luck!
Brian
SAP BPC Support North America

SAP Microsoft Management Console Windows MMC no open

Hello guys,
I have a problem with the MMC is not working and does not open. I do not get how to stop the instance of SAP. When I open the MMC is running the process and never opens it.
I am also trying to stop the instance with the following command STOPSAP.EXE name=SID nr=00 SAPDIAHOST=host from the D:\usr\sap\SID\SYS\exe\uc\NTAMD64, connected to the user and SIDadm gives the following error and does not stop the SAP instance:
Problem signature:
Problem Event Name:     APPCRASH
Application Name:            stopsap.exe
Application Version:     7010.137.18.59200
Application Timestamp:     4d98ef00
Fault Module Name:     MSVCR80.dll
Fault Module Version:     8.0.50727.4053
Fault Module Timestamp:     4a59381a
Exception Code:               c0000005
Exception Offset:     000000000001de04
OS Version:     6.0.6002.2.2.0.274.10
Locale ID:     8202
Additional Information 1:     087f
Additional Information 2:     44187f75b1dcde9b0b1e7fe2257e0dd7
Additional Information 3:     d82e
Additional Information 4:     0064b09090719a14286f02f8be1df635
The instance of SAP is working without problems, but I need to stop services for server maintenance.
I have Windows Server 2008 Enterprise (Service Pack 2) y Oracle 10g.
How else I can stop the SAP instance, I do not restart the instance without stopping the services correctly.
Thanks guys for the help
Desiru00E9

Hi Desirée/ Orkun,
Did you find a solution to the hanging issue of MMC.
It is not working in our case and we are struck for last 5 days and even SAP is not helping us with any inputs/ thoughts.
In our case, We have recently upgraded Windows to 2008 R2. SAP is coming up but MMC program hangs and has to be closed via CtR-ALT-DEL. After that mmc.exe process is started but MMC console does not comes up.
We get the following message in event viewer:
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.saladinos.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:Windowssystem32mmc.exe
We have upgraded Kernel, installed the latest MMC patch.
Please advise.
Thanks,
Antarpreet

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

Error in starting SAP Systems at SAP Management Console

Hi,
I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1" run SAP management Console->SAP Systems-> start .
after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error follow as:
error messages:
Start failed:2
Permission denied
I need help,
best regards

Hi
You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
User must be <sid>adm or a member of the Local or Domain Administrators
Regards
Juan

Missing Instances in SAP Management Console

Hello,
After troubles with Deploy (error message occurs) I tried to restart the J2EE Engine with sapmmc, but it does not start correctly (not all icons are green). So I stopped the J2EE engine, rebooted my developer PC and afterwards the list in sapmmc is empty. I only can see "Console Root", "SAP Systems" on the left side and "There are no items to show in this view" on the right side.
Should I start any service manually?
sapstartsrv.exe
Error : Cannot install service.
CreateService failed: 421
The account name is invalid or does not exist, or the password is invalid for the account name specified.
STARTSAP name=dm0 nr=01 sapdiahost=sapserver (NO Change)
librfc32.dll and librfc32u.dll files are present in C:\WINDOWS\system32.
SAPLOC or SAPMNT folders are not available.
when SAPDM0_00 in services.msc started, after starting it automatically shuts down.
SAPOSCOL in services.msc is in started status only.
SAP MMC
1. Copy sapmmc.dll, sapmmcms.dll, sapmmcdb6.dll, sapmmcinf.dll, sapmmcada.dll, and sapstartsrv.exe to C:\Windows\system32
2. Check that librfc32.dll is available in C:\Windows\system32 (both librfc32.dll and librfc32u.dll are likely available if you have installed SAP GUI already) If not, copy from the SAR file.
3. Change directory
>cd C:\Windows\System32
4. Register DCOM Type library of the service
> sapstartsrv -t
Click on u201COKu201D in the following Window
5. Copy sapmmc.dll, sapmmcms.dll, sapmmcdb6.dll, sapmmcinf.dll, sapmmcada.dll, and sapstartsrv.exe to C:\Windows\system32
6. Check that librfc32.dll is available in C:\Windows\system32 (both librfc32.dll and librfc32u.dll are likely available if you have installed SAP GUI already) If not, copy from the SAR file.
7. Change directory
>cd C:\Windows\System32
8. Register DCOM Type library of the service
> sapstartsrv -t
Click on u201COKu201D in the following Window
9. Start mmc from DOS or Run
10. Click on menu "File" u2013 "Add/Remove Snap-in"
11. Click on "Add"
12. Select "SAP System Manager" then "Add"
13. Enable "Export user mode" option then click "Next"
14. click on "Next"
15. Type the system information <SID> as System and "<hostname> <instance number>" as Instance, then click on "Add". The entry should be displayed in the "Fixed instance list" window. Add more entries or Click on "Finish"
Right-click on SID and select start.
Error : Cannot connect to SAP Service on sapserver
WebService error:20
Unknown error
DCOM Interface error:80070424
The specified service does not exist as an installed service.
Server execution failed.
Please help me in solving the above issue.

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

SAP Management Console (5NN13 port) does not open in Firefox or IE browser.

Hi ,
Title: SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Iam not able to see the pop up window SAPMC when i run the following in firefox browser but it works fine in my colleague's computer:
http://hostname:5NN13
I tested the same sap system with this address and it works fine - http://hostname:5NN00
Iam sure that something has to be changed in my browser but dont know what. Please help. Thank you.
Regards,
Mohan.

Dear krishna,
even if your thread is closed:
If you get this error in firefox you just have to install java plugin.
Please find documentation [here|http://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox].
Best regards,
Alex
Edited by: Alexander Foerster on Dec 2, 2011 12:44 PM

Error in opening SAP BODS 4.2 Management Console

Hi All,
I am getting the below error when I tried to open the Management Console in SAP BODS 4.2 SP1. Please help. Error is attached.

Hi,
Go to BIP Server->services.msc->Business objects data services->stop and restart the services.
For Tomcat also stop and restart the services.
Regards,
Narasimha.

How to rectify sap management console

hai sap guru's,
sap management console was deleted in my system, how can rectify this problem otherwise we need to install again
thanks & regards
sathish .n

hi,
Copy the MMC console from Q/A system and paste it here.
If you are not having sap dll files in system32 folder means copy the same from another and paste it in this system.
Regards
Vijay

Problem with SAP Management console 'yellow is not changing to green'

Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
I also tried Some suggestions posted before by using cmd ....Please help me out in a step by step manner.
Thanks.

trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 27 21:12:36 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno      00
M sid        ECC
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2900
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2900) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Aug 27 21:12:37 2014
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05D30040
M DpShMCreate: allocated wp_adm at 05D31E40
M DpShMCreate: allocated tm_adm_list at 05D365C0
M DpShMCreate: allocated tm_adm at 05D365F0
M DpShMCreate: allocated wp_ca_adm at 06105890
M DpShMCreate: allocated appc_ca_adm at 0610B650
M DpShMCreate: allocated comm_adm at 0610D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0618E450
M DpShMCreate: allocated gw_adm at 0618E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0618E4C0
M DpShMCreate: allocated wall_adm at 0618E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 27 21:12:38 2014
M ThInit: running on host gcecc62
M
M Wed Aug 27 21:12:39 2014
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS00\exe to Path.
C
C Wed Aug 27 21:12:40 2014
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   062FC018   063015B4   06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C
C Wed Aug 27 21:12:41 2014
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   062FC018   063015B4   06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10933]
B
B Wed Aug 27 21:12:42 2014
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server gcecc62_ECC_00 on host gcecc62 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Wed Aug 27 21:12:42 2014
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2900) [dpnttool.c   327]
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ECC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c   1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00                          <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00                          <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c   14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c   14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c   14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c   14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c   14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c   14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c   14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2900 Ended         no      1   0             0
1 DIA     1548 Ended         no      1   0             0
2 DIA     2908 Ended         no      1   0             0
3 DIA     2920 Ended         no      1   0             0
4 DIA     2924 Ended         no      1   0             0
5 DIA     1944 Ended         no      1   0             0
6 UPD     2936 Ended         no      1   0             0
7 ENQ     2944 Ended         no      1   0             0
8 BTC     2952 Ended         no      1   0             0
9 BTC     2960 Ended         no      1   0             0
10 BTC     2968 Ended         no      1   0             0
11 SPO     2972 Ended         no      1   0             0
12 UP2     2980 Ended         no      1   0             0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      0 |      2 |   2000 |      5 |      5 |
+------+--------+--------+--------+--------+--------+
| DIA |      5 |      5 |   2000 |      5 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events       total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00                          < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00                          <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c   10259]
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ECC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c   1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00                          <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00                          <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c   14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c   14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c   14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c   14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c   14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c   14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c   14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2900 Ended         no      1   0             0
1 DIA     1548 Ended         no      1   0             0
2 DIA     2908 Ended         no      1   0             0
3 DIA     2920 Ended         no      1   0             0
4 DIA     2924 Ended         no      1   0             0
5 DIA     1944 Ended         no      1   0             0
6 UPD     2936 Ended         no      1   0             0
7 ENQ     2944 Ended         no      1   0             0
8 BTC     2952 Ended         no      1   0             0
9 BTC     2960 Ended         no      1   0             0
10 BTC     2968 Ended         no      1   0             0
11 SPO     2972 Ended         no      1   0             0
12 UP2     2980 Ended         no      1   0             0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      0 |      2 |   2000 |      5 |      5 |
+------+--------+--------+--------+--------+--------+
| DIA |      5 |      5 |   2000 |      5 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events       total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00                          < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00                          <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c   10259]
Good Bye .....
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2524] Wed Aug 27 21:12:28 2014
[Thr 2524] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    73
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2516
[Thr 2524] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2516) [msxxserv.c   1824]
[Thr 2524] Wed Aug 27 21:12:29 2014
[Thr 2524] load acl file = D:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 2524] MsGetOwnIpAddr: my host addresses are :
[Thr 2524]   1 : [192.168.10.1] gcecc62 (HOSTNAME)
[Thr 2524]   2 : [127.0.0.1] gcecc62 (LOCALHOST)
[Thr 2524]   3 : [192.168.10.11] gcecc62 (NILIST)
[Thr 2524] MsHttpInit: full qualified hostname = gcecc62
[Thr 2524] HTTP logging is switch off
[Thr 2524] set HTTP state to LISTEN
[Thr 2524] ms/icf_info_server : deleted
[Thr 2524] *** I listen to port sapmsECC (3600) ***
[Thr 2524] *** I listen to internal port 3900 (3900) ***
[Thr 2524] *** HTTP port 8100 state LISTEN ***
[Thr 2524] CUSTOMER KEY: >Z0250905160<
[Thr 2524] Wed Aug 27 21:13:44 2014
[Thr 2524] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gcecc62_ECC_00 [msxxserv.c   4679]

Problem with SAP Management console

Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
Thanks.
Abdul Hakim

I have the same problem ???
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    214
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\Ibo-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibo-PC
M pid        2972
M
M kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2972) [dpxxdisp.c   1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F9A0050, size: 7163600)
M DpShMCreate: allocated sys_adm at 000000000F9A0060
M DpShMCreate: allocated wp_adm_list at 000000000F9A3070
M DpShMCreate: allocated wp_adm at 000000000F9A3260
M DpShMCreate: allocated tm_adm_list at 000000000F9AAE40
M DpShMCreate: allocated tm_adm at 000000000F9AAE90
M DpShMCreate: allocated wp_ca_adm at 000000000FEEDDA0
M DpShMCreate: allocated appc_ca_adm at 000000000FEFD7B0
M DpShMCreate: allocated comm_adm at 000000000FF0D1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001005F060
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001005F110
M DpShMCreate: allocated j2ee_adm at 000000001005F150
M DpShMCreate: allocated ca_info at 00000000100600D0
M DpShMCreate: allocated wall_adm at 0000000010060160
M DpCommAttachTable: attached comm table (header=000000000FF0D1C0/ft=000000000FF0D1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M rdisp/thsend_mode : -1 -> 0
M ThInit: initializing DIA work process W0
M
M Thu May 29 07:17:58 2014
M ThInit: running on host Ibo-PC
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.212)
C
C DBSDBSLIB : version 720.00, patch 0.212 (Make PL 0.214)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.212) Call TH callback after cancel (note 1692560)
C    (0.210) Init length of tablename for describe (note 1678130)
C    (0.200) Take care of warnings during database connect (note 1600066)
C    (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C    (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C    (0.103) Close all lob locators at end of the transaction (note 1626591)
C    (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C    (0.098) Use filesystem counter for R3szchk (note 1606260)
C    (0.092) Secondary connection to HANA (note 1481256)
C    (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C
C
C Loading SQLDBC client runtime ...
C
C Thu May 29 07:18:00 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C
C Thu May 29 07:18:01 2014
C SQLDBC SDK     : SQLDBC.H 7.8.2    BUILD 028-121-245-008
C SQLDBC Runtime : libSQLDBC 7.8.2    BUILD 028-121-245-008
C SQLDBC client runtime is MaxDB 7.8.2.028 CL 245008
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM          : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.02   Build 028-121-245-008
C Database release is SAP DB 7.8.02.028
C INFO : Database 'NSP' instance is running on 'ibo-pc'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C DB max. statement length      : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: ibo-pc-NSP, since=20140529071801, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

Cannot start BW or HANA instances in SAP Management console

Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

Nothin visible under SAP Management console\content root

Hi,
I have installed 2004 sneek preview...It was working fine...But in the last 2 days the IP of the computer in which it was installed changed twice...and now nothing is visible under SAP Management Console->content root...
Could u tell me what could have happened to the system...and a possible way to fix it??
Regards
Krishna

Hi,
1) Goto usr\sap\SID\SYS\exe\run\sapstartsrv.exe
2) Click on sapstartsrv.exe
Specify SID, Instance number, sap profile path and click on ok.
Then you can be able to see instance details in MMC
regards,
kanthi

SAP MC (management console)

Similar Messages

Maybe you are looking for