SAP MDM Console not allowing to add new fields or load repository

Hi all,
We are in SAP MDM 7.1 SP06. I do have access to create table, fields, ports etc., And I also have access to load and unload repository.
But when I login to SAP MDM Console and repository, options to load repository --> immediate and update indices are disabled. This is happening for Add/ Delete Table/Fields/Port etc.,
However, if I login to repository using MDM console in another laptop or system using the same userid, I am able to perform all the operations mentioned above.
Can you please help me with any suggestions to fix this. I do not want to reimage my laptop now inorder to fix this.
I tried to uninstall and install mdm console again but in vain.
Thanks,
Rajesh

Hi Rajesh,
In the Main Menu you have a lock sign,click on that and unlock the view.
This should solve the problem.
Thanks,
Ravi

Similar Messages

Not able to add new fields in Content cube

Hi all
I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
Please write me the details or send me in my email at
[email protected] , I would be so happy for your help.
Thank you in Advance.
Sajita

Roberto;
I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
Sajita

IDOC - add new field in in existing segment definition

Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
Rajeev

Varma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev

SAP MDM Console

Hi,
I'm new to MDM Console. Can anyone please tell me how can I, from SAP MDM Console restrict a particular user from <u>viewing</u> specific records in MDM Data Manager.
Thanking you in advance.
Hemal

Hi,
You can achieve this using Masks.
Step 1:
In the Data Manager , you filter records based on what ever condition you are looking for. Add the filtered records to a Mask.
If you have no masks defined in the Data Manager.
Select Masks table from the top left corner list in the Data Manager and create a Mask.
Once you finished creating the Mask, go back to the Main table and add the Filtered records to the created mask.
(Select all the records right click and select Add to Mask and select the Mask).
Step 2:
a. For New Role:
1. In the MDM Console for that particular repository, create a new role and in the role details grid, select Table/Fields tab and look for Masks table. In the Constraints column, you select the Mask you created in the Data Manager.
2. Assign the created role to the user.
b. For Existing Role:
In MDM console select the role in the repository and
in the role details grid, select Table/Fields tab and look for Masks table. In the Constraints column, you select the Mask you created in the Data Manager.
Hope this helps.
Let me know if you need any additional information.
Thanks and Regards
Subbu

Crystal reports not showing in add new in vs 2013 ultimate

Dear every one
i installed cr x1 but it not showing in add new item reports
then i download CRforVS_redist_install_32bit_13_0_13 and install it but there is nothing in add new item in visual studio 2013
ultimate please guide me how to fix this issue
thanks

Hi ABDULLAHAAJSOFT,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation
Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
As you said the crystal reports, I am afraid that this issue is related to third-party, and it is not supported in this forum. So I suggest you could try posting this issue in
crystal reports website:
http://scn.sap.com/community/crystal-reports , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Where can I find the SAP MDM Console 5.5.62.63 ???

Hello,
We loose the source of the MDM gui version 5.5.62.63.
Now we have to install the "import" & "data" managers on another desktop.
I try to find on http://service.sap.com where to find that version but it seems that this version is not available anymore ?
Do you have any clue where can I download this versio of the MDM gui ?
SAP MDM Console 5.5.62.63
SAP MDM Data Manager 5.5.62.63
SAP MDM Import Maanager 5.5.62.63
Thanks in advance for you help,
Dom./

Hi Dom,
I am afraid to say that since the standard maintenance terms for the SAP NetWeaver MDM 5.5 has expired on March 31, 2010.
So that's why this version is not available anymore. Please find below link for verify on this:
/people/markus.ganser/blog/2010/01/27/sap-standard-maintenance-terms-for-sap-netweaver-mdm-55-about-to-expire
Also refer similar thread, Re: Vendor Content Information (Release 5.5)
Regards,
Mandeep Saini

Address book model is not respected when I add new fields

Hello,
If I add new fields in the model of my adress book. AddressBook display does not comply with the specified model.
For example, after father, mother and joint, I added the following fields child 1, grand-child 1, child 2, grand-child 2, child 3, grand-child 3, child 4, grand-child 4, in order to have descendants of my friend or family.
The result is :
child 3 : Oscar
child 4 : Anatole
child 2 : Victor
child 5 : Constantin
child 1 : Aline
Please note that I entered the 5 children in the good order : Aline, Victor, Oscar, Anatole, Constantin.
An other example can be completely different with children and grand-children mixed !
To be complete, I can say that in Mac OS X 10.4 address book was running correctly, but is no longer running in 10.5 nor 10.6.7
Best regards
Bergama

The iPad can't be infected with a virus - by the definition of a virus being a malicious program that replicates itself across your operating system and other programs. It can be infected with malware, however that usually only happens when a user taps on a link, or actively does something.
Since the iPad can't run flash or java (?)(all or most kinds of java) then it's relatively secure.
You're probably fine.
The iPad's operating system is different enough from Mac's or PC's that even if you do tap on a virus it can't run...the malicious code is speaking a language that the iPad can't understand.

I want to add new songs to my ipod. When I set it up with itunes years ago I had a different computer that I no longer have. Now it will not let me add new songs to my ipod shuffle without erasing everything that is already on it. Help!!!

I want to add new songs to my ipod. When I set it up with itunes years ago I had a different computer that I no longer have. Now it will not let me add new songs to my ipod shuffle without erasing everything that is already on it. Help!!! Is there any way around this?

Yes, I was aware of this but the phrase "Any items imported from audio CDs or acquired from other sources will not copy from your device to the iTunes library." is what worries me. Will this eliminate my Notes, Calendar Events, etc or will it apply mostly just to the music?

How to add new fields in Web UI where AET is not applicable

Hi,
We tried to add new fields using AET, but surprisingly 'Create Field' is in disabled mode in AET Configuration.
We are trying to add custom fields to the view GSTEXT/notes. But we could not do that.
what are the other possible ways to add custom fields and the required configuration for that.
Your help and suggestions will be highly appreciated.
Best regards,
Venkat

Hi,
Thanks for the response, We want to add two custom fields in Component / View (Gstext / Note).
We are trying with AET tool, But in AET tool configuration window, ''Create Field'' is in not in active mode (disabled mode), we can see it but it is not clickable.
In order to proceed and create new fields it has to be in enabled.
Kindly suggest me how to activate this field. your suggestions will be highly apprecaited.
Thank you
Venkat

Not allow to add condition type, if it already existing

How to setting, if I want to control that not allow to add same condition type, if it already existing in the transaction.
For example,
PR00    100.00 USD/MT
ZDIS       10.00 USD/MT
ZDIS         8.00 USD/MT (Not allow to enter or add condition type)
Thanks!!
Edited by:
Edited by: Kitta on Jan 29, 2008 3:17 PM

Create A routine function for same .
I am given here the code also
Write the following codes given below in include file.
*& Include           ZXVVAU05
Written for restriction in VA02 for Condition type duplication
DATA:   BEGIN OF tXKOMV OCCURS 50.
        INCLUDE STRUCTURE KOMV.
DATA:   END   OF tXKOMV.
data : tab_name(40) type c ,
       ld_len type i , ld_len1 type i .
field-symbols : <tab> type any.
tab_name = '(SAPMV45A)XKOMV[]'.
assign (tab_name) to <tab>.
txkomv[] = <tab>.
describe table txkomv lines ld_len .
sort txkomv by kposn KSCHL .
delete adjacent duplicates from txkomv comparing kposn KSCHL .
describe table txkomv lines ld_len1 .
if ld_len1 ne ld_len .
refresh txkomv .
message e002(zmm) with ' Please remove duplicate condition in item price' .
endif .
4. Save and activate.
This has to be done thru Abap person ,Hope this will solve the problem of yours as it has mine.
regards
Manu Kapoor

System should not allow to add line items in delivery

Hi,
1) system should not allow to add line items in delivery( in reference to sales order or STO)
2) sales order/STO should not be changed if delivery exists
how to control the above
Alec

Hi Lakxmi,
I found answer for 1st point from you are old answers.
can you throw somelight on 2nd point.
Thanks
Anil

My early iPad will not allow for a newer version of software than 5.1.1.

My early iPad will not allow for a newer version of software than 5.1.1 is there a way of loading on a newer version?

Hi,
If you have an original iPad, that is limited to iOS 5.1.1 and cannot go any further. All other iPads and iPad Minis can get up to iOS 7.0.4.
Hope this helps!

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add new fields in sap scripts using itcsy structure

hi guys,
could u provide the screen-shots for adding field in scripts. copied standard forms .
thanks& regards
eswar.

Hi,
you cannot add new fields using ITCSY. It is the interface structure between a SAPscript an a value-changing form-routine.
Need example anyway?
Good luck!
Jo

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

SAP MDM Console not allowing to add new fields or load repository

Similar Messages

Maybe you are looking for