Sap menu folder

Hi focks,
This is urgent how to create sap menu folder.
for example
in sap menu accounting->enterprice controlling etc...
i will reward the points if yu answer this question

area menu se43
u can see icon as at same level and next level. check out the screen. may be 4th and 5th icons.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/7e/b9c33a8b7111d39731006094b9867b/frameset.htm
reward all helpful
Message was edited by:
santhosh reddy

Similar Messages

Placing the transaction in SAP Menu

hi all,
i have created a ztable and maintaining a transaction for that. T-code is zm93f.
this transaction i have to place in the SAP Menu
logistics -> Material Management->Purchasing->Purchase Order-->Messages
Please let me know the procedure to follow .Please help me out from this.....
Thanks in Advance....

Hi,
have a look at the below threads.
Re: sap menu folder
Add transactions in SAP Menu
Adding Report to SAP Menu
Regards,
nagaraj

Adding the sap menu

I erased by mistake the sap menu folder - how can i add it back?
Regards,
Moshe

Hi
Can you explain how you erased? I think u met of changed the settings
Login to sapgui
<b>Goto menu->Extras->Settings</b>
You will get some options
<b>1.Display favorites at end of list
2.Do not display menu,only display favorites.
3.Do not display screen
4.Display technical names</b>
I think u have to set these settings it will help u.
kiran kumar.v

How to add new folder in sap menu visible to all users

I want to add a new folder in sap menu. i can do it for my user id as it is user specific. I wanna know that how to add a folder so that every user able to see the same i.e irrespective of user-ids.

Hi Ramya,
This can be done in SAP menu instead of User Menu, provided all your users are using SAP menu. If a folder is created in User menu it would be visible only to the user. If it is created in SAP menu and if all the users are using the SAP menu then the folder would be visible to all...
Hope this clarifies your query...
Reward me points...
Regards
Prasanna

Activating a Particular Module in SAP Menu?

In our sap menu we usually see different folders for different modules such financial accounting. Human capital management etc. I can't not see that folder of public sector management {PSM} module in my front end as well as spro backend sap menu. How can i activate that menu of that module. My Version is ECC 6.0 EHP4. THanks

Hi Prasad
Thank you so much. It has good information.
As Naveen Pandrangi's blog
XI : RFCAdapter ReConnect Issue
"when the end system comes up, calls from XI would be successful. RFC Adapter would now check the connection for every message instead of only once when the communication channel is updated."
Here small question is what about the old messages that were failed due to Connection Failure or SAP down.
Please try to comment.
Thanks in advance
Ramesh

Enhancement in SAP menu

Hello All,
I need to attach a folder in SAP Menu and attach two
transaction to it . Can anyone tell how to do it.
Regards,
Hazam

Hi
Trx SE43N, insert the menu S000 and press CHANGE icon.
The system'll ask you to create an enhancement to be linked your modification: choose YES, it's better.
After creating enhancement, you only have to navigate to the point where you need to insert your new trx.
Max

Adding Tcodes to SAP menu path

How to add custom T codes and sap T codes to a particular folder in SAP menu path?
Here I would like to display new transaction codes in below SAP menu path . SAP menu path will be the initial screen of SAP.
SAP menu->Information system->finance account->general ledger-> daily.
Here I would like to display my transaction codes under node DAILY. Please reply to me .

Hi,
1) Go to SE43.
2) Give name to area menu (ZTEST) and description (SAP menu) to the area menu.
3) Click "Add entry as subnode". In popup give "Information system" in the text.
4) Click "Information system" and then click "Add entry as subnode" and give "finance account" as text in the popup.(same procedure for general ledger and daily).
5) Click "Daily" and then click "Add entry as subnode" and provide your text and tcode this time.
Regards

EH&S: EA-PLm activation. EH&S missing under SAP menu

Hi all,
The EA-PLM extension (in a development environment)was activated (not by me) but EH&S folder is missing under logistics in the SAP menu.
I had also made this activation (by me) before in a sandbox environment and I was able to see EH&S in SAP menu without problem.
In Tcode SCPR20PR, I've checked EA-PLM-IMG, EA-PLM-MENU and EA-PLM-AKH and the logs show all green statuts.
So, do you have any idea to explain why I am not able to see EH&S in the SAP menu and to resolve this problem?
Thank's,
Best Regards,
Ludovic

Hello
it seems to be a problem which is well known in the EH&S world. I have done an inquiry and found these pages:
http://www.saptechies.com/faq-dangerous-goods-problems-after-ehs-upgrade/
which provides this usefuil help (hopefully; i did not control):
"If the EA-PLM switch is active, however the menu path is still not displayed, follow the instructions contained in Note 855959."
Furtheremore I found this link:
http://www.akiboks.com/text/93b25125-f5ab-48ef-a59a-76d4ccb9b841/1/pdf
Hope that this helps.
With best regards
C:B.

Execute Query from SAP Menu with Analyzer

Hi.
I have created a menu for users. This menu contains links to queries that are opened with Internet Explorer.
Now, i want to have another link but instead of opening it with Internet Explorer, i want to open them with Analyzer.
Is possible to launch a query trough SAP Menu link in Analyzer? User will not need to open it trough 'Folder + Open Query ..'
Kind regards,
Inigo.

Here are couple of directions:
1. Create a local workbook which has embedded query. Store this workbook on a remote server or BI/FTP and create a link from it. But once this link is clicked, that workbook will be downloaded and user will have to login again in BEx analyzer.
2. If we can call transaction "RRMX" from web, it will eliminate problem of relogin.
3. Launching BExAnalyzer.exe file from web should launch analyzer automatically. Check whether this file accepts any parameters like open dialogue or query name??
Hope something helps..
Abhijeet

Is it possible to open a query from sap menu favorite to excel?

Hi all
I have added a query in favorite . From the favorite in sap menu , i want to open the query in excel.
Is is possible?
Currently the query open in web.
Please revert back if you have any idea
Thanks
ajay

Hi Daya Sagar,
You said the query saved in favorite from query designer will open in browser and the one saved from analyzer will open in bex excel. But it does not work for me. It saves as web icon and both query is opening in browser.
Hi All,
The different story for me is I have problem of opening the web browser by running a query from favorite or user menu because in the url I have different Client. Is there any way to fix this url problem. Any one in this thread can help me on this issue and will be awarded. Thanks.
Raj

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

Runnning report from Sap menu screen

hi
my client is running loan management module. in some transaction when he presses a button on the sap menu ( something called cash flow) , SAP generates a table with all calculated values and stuff ( like a report ) . they want a different output format . how can i write a custom report that takes all the values from the transaction and gets executed when he presses the same button on the menu but with the format they want.
( they do not want to make this a standalone report)

What sort of "report" does this transaction produce? Is it a list display(WRITE statements) or an ALV grid. If it is a list display, it would be possible to write a custom program, which SUBMITs the standard report, export the resulting list to memory, import that list into memory, and pick it apart and reformat to the way you want. This is all possible, but it should be a report program and produce a list display.
REgards,
RIch Heilman

How to add a custom code to standard sap menu

Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juan

Hello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes

Change in Standard SAP menu : How to catch the transaction code!

Hello,
I have added a menu item 'More Help' to the standard SAP menu 'Help' which should navigate to URLs for the respective transactions. Suppose i am in transaction FB03 and click the 'More Help' menu, it should navigate to the URL mentioned in a table.
My Problem is I have created a transaction for that menu item 'zhelp' which calls a program and when i am clicking the 'more help' tab , the original value of sy-tcode which should be FB03 is replaced with the new Transaction which is used for the menu item i.e. 'zhelp'. Because of this i am not able to retrieve my value from the table corresponding to the transaction FB03.
Is there any other system field which stores the value of transaction FB03 aftter navigating to other transaction? How should i go ahead with this? Please help!!
Edited by: Rojalin Priyadarshiny on Sep 10, 2009 3:45 PM

Hi,
I really dont know in how many standard transactions you have added the More Help option.
If you hav added only in 2 to 3 transactions then you can think on using the below Logic.
Say if u have added in FB01, FB02 and FB03 transaction.
Find one exit for each transaction, in the exit EXPORT TCODE ( EX: FB01 ) to memory.
In your Ztransaction report IMPORT the TCODE from memory.
Now u will get FB01 after inmport statement and u can make use of this.
If the option is added in many transactions , you have to think again in using the above logic as it involves identification of many Exits.
Regards,
Sravan

Upload Files into SAP Office Folder in Background

Hi All ,
Has anyone tried uploading file(s) of any type say *.XLS , *.PDF to SAP office folder (Outbox) in the background . I am using the function module 'SO_DOCUMENT_REPOSITORY' with methods "SAVE" , "ATTCREATEFROMPC" and "SEND" . It works fine in foreground without any errors . But when tried to schedule in background , the job stops at the method call "ATTCREATEFROMPC" and gives a message "Database error for <INSERT INTO KPRO> " . It looks like the uderlyiong function module checks for an active GUI and fails during background .
Any thoughts or other solutions would be appreciated ....
Thanks

Hi,
I think ATTCREATEFROMPC method is for loading the file from frontend PC. It is bound to fail if you run it in background since there is no SAPGUI running it and it can't know the location.
You will need to use some other method to be able to read the files from the APP server, and have your documents on the APP server if you want to run your code in the background.
cheers,
Ajay

Sap menu folder

Similar Messages

Maybe you are looking for