SAP mibs and Systems Insight Manager (SIM)

I'm trying to get our CCMS to send SNMP traps to our SIM (Systems Insight Manager) server. The SAP side of the setup is pretty straight forward. The SIM side, however, is not so clean.
Hopefully someone has had experience with this, and can either point me at some documentation / blogs that I've not yet been able to find, or just let me know where I've gone wrong.
The SIM server is 64bit Windows 2003, with SIM v 5 SP5.
The base mib pack is 7.70.
I've put the mibs provided by SAP on the SIM server in the mibs sub-folder.
I then ran "mcompile SAP_R3_MIB.txt" at a command prompt and it generated "SAP_R3_MIB.cfg".
Next I ran "mxmib SAP_R3_MIB.cfg" which said it completed successfully.
Yet, when I go into "Options -> Events -> SNMP Trap Settings.." the SAP_R3_MIB is not listed.
I have brought other non-SAP mibs in this way in the past. Is there something special I'm missing?
Any help would be greatly appreciated.

Hi,
I am trying to send SNMP alert from Solution Manager to Tivoli TEC. On solution Manager side log files shows that trapsend was triggered and there was no error. However I do not have any visibility on TEC side which is managed by other team. All i do is when I perform test , i asked them to check if they received anything and they say NO.
I had given them MIBS provided by SAP to TEC team. I don't know what they have done with that but looking at your blog I can tell that you are experienced on the receiving side.
Can you help me to understand the steps they should be performing with MIBS which I gave them. Do they need to change.txt file to .mib as you did. Also what is the way to check if they are receving anything or not? any tool or command at OS level also ?
If you have any document which you created based on your experience, it will be great. you can send it to me at [email protected]

Similar Messages

Vcenter 5.1 use HP SIM (HP Systems Insight Manager)

Hi All Memember
Now i use HP SIM monitoring wanranty of server only but i need use HP SIM check and monitoring hardware of server (vsphere 5.1) .
Phase 1.
I need to monitoring HP Server in HQ , How to intergate HP SIM to vmware esxi ?
Can check hardware and send email to IT ADMIN
Version: Systems Insight Manager 7.0.0 - Windows      Build version:C.07.00.00.00
My VMware Exi
HQ
1 . HP server vSphere 4.1
    have vm 21 guest
Datacenter
                                          Vcenter server
1 HP server vSphere 5.1   2. HP server vSphere 5.1 3. HP Server vSphere 5.1

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager SNMP Traps not being received

I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - Database questions, what is this database for?

Hello,
I am either missing this information completely in the Installation guide or it doesn't exist, but I am looking for details of the database that HP SIM needs to install.
-I assume this database will be used as a CMS?
-What information will this database be storing?
-If I have multiple HP servers, is it best to put this database on a remote dedicated database server? Will each HP machine that has SIM installed be pointing to this database?
Thanks.

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - Disk Alerts Not being received

Hello,
I'm not receiving any disk alerts in HP SIM 7.4.0
If I open HP SIM and click on the server that has a disk issue it shows that there is an issue with the disk and has an yellow triangle next to Smart Array controller which is good.
However i am not getting an email alert for it. If I go to Events - Automatic Event Handling - Manage Tasks I have All Events selected as I have only added one server so far so should get alets for everything.
I only get an alert when restarting the server. I should get an email to let me know that there is a problem with the array on the member server?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager

I'm having an issue getting HP System Insight Manger to show/display detail for most of the 30+ proliant servers on the network. See screen capture. What am I missing or need to do?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - login fails

Hi there,
on "HP Systems Insight Manager" i can't login, because my password contains
German special characters like (öüäß).
The version of HP SIM is 7.4.0 on windows Server 2008R2 or Windows Server 2012R2.
Is there a solution?
Thanks in advance Ralf
Hallo zusammen,
ich kann mich beim "HP Systems Insight Manager" nicht anmelden,
wenn mein Passwort deutsche umlaute enthält (öüäß).
Die HP-SIM Version ist 7.4.0 auf Windows Server 2008R2 bzw. Server 2012R2.
Gibt es dafür eine Lösung?
Danke vorab Ralf

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Hp system insight manager-device discover issue

Hi,
I have recently installed hp System Insight Manager 7.4. But I can't discover any hp device. The system did not respond to SNMP. when discover any hp device then System Insight Manager showing error:
Major: The system cannot be identified properly for HP SIM to manage;
              unable to get one or more of the following: model, serial number or
              unique identifier (UUID). For management processors, verify the
              system is running the latest firmware. For Linux based operating
              systems, you must have dmidecode installed, enable the
              PermitRootLogin and PasswordAuthentication in sshd, and use root
              sign-in credential. For HP-UX, verify the sign-in credential. For
              Windows, check if WMIMapper is configured correctly on the CMS and
              verify the sign-in credential.
Any ideas on a fix for this?
Thank you,
Nahid

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

Issue while installing HP System Insight Manager on Windows Server 2008

Hi everybody,
as I wrote in the subject, I'm having trouble while trying to update my HP SIM vers. 6.1 to HP vers. 7.1 on my server running Windows Server 2008 Enterprise SP1.
I encounter the errore message:
"HP System Insight Manager Installer detected an unsopported operating system..."
How can I fix this problem?
is it OS really unsopported or Do I have to perform some upgrade before?
is it because of my Microsoft SQL server version? I have the 2005 ver. Do I need the 2008 one?
in anycase HP SIM vers. 6.1 runs with no problem.
Thanks
D

It appears that you have a commercial LaserJet in an enterprise enviornment. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SAP License and System Information

Hi,
How can i view the SAP License and System Information.
Points guaranteed for useful answer.
Regards,
Raju

Hi,
Login to SAP system with any client and select the Menu Item System ---> status.
You can see the Version info, License info, Support Pack levels, Database and OS details.
Regards,
Chanda.

No element type defined for object type BSEG and system / Disp Management

Hi all,
I get the error message
No element type defined for object type BSEG and system ...
Message no. UDM_MSG006
when I try to save a dispute case.
What do I have overlooked in config?
Thanks
Hein
Points guaranteed as always.

Hi Sai,
I have configured the standard settings in there.
When I add 2 customer-disputed objects from 2 different customers I get that error.
Any solution to this?
Thank you!

MDS 9509,9222i & 9234 configuration with HP System Insight Manager

I have enabled the Https(Cimserver) using a dummy ssl certificate. Still my central management server (HP SIM) doesn't recognizes the switch to be a Storage Switch.
when i run the identification query, it stops at " CIM_RegisteredProfile"

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

Renaming managed devices in HPSIM (HP insight manager)

Hi, wonder if anyone can advise.
We have joined our xenservers into HPSIM and the devices are showing by IP address only.
Is there a way to rename the managed device manually so it can show the host name?
thanks

Hi NG Verma,
Since this related third party tools I suggest you ask HP for the further help, the following article about your manage tool may help you.
HP Systems Insight Manager Getting Started
http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/mxhelp/mxportal/en/start.html
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAP tools and Third party tools

Hi SAP frinends,
I want to know some information of the tools. Now we are using CCMS tool to check the SAP Applications. Is there any tool either SAP or Third party tool to check SAP applications and system perfomance Grafically. We are looking for grafical mode tool. Which tool is better to check running application on SAP systems. Please give your advices for me......
Best regards,
Prasanna.

Hai,
CCMS is the best way to monitor your SAP applications, SAP has introduced lots of things to encourage use of CCMS for system monitoring. You can Install agents to monitor your systems. If you have a CEN system (SOLMAN) then you can Install agents in all the satellite systems and monitor all the satellite systems from CEN. You can also monitor the availablity of the satellite systems from CEN using CCMSPING agent.
For checking the Performance of the system if you have only ABAP stack then you can use ST03N where you can get the graphical representations as well. For JAVA stack you can use Eclipse which is a tool from SAP.
Check the below link.....
http://www.basisconsultant.com/blogs/91-tips/264-an-experience-with-java-memory-analyzer.html
Regards,
Yoganand.V

What is data archiving and DMS(Data Management System) in SAP

what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PM

Hi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards.

SAP mibs and Systems Insight Manager (SIM)

Similar Messages

Maybe you are looking for