SAP MII 11.5 Compatibility with ECC6
We are currently using xMII 11.5.6 with SAP 4.7. We are upgrading to ECC6 in the next few months. Are there any compatiblity issues that we need to watch for in this upgrade? We are using the IDOC Listener and JCO interfaces in our Business Logic Transactions.
We also have some Webservices which use the SAP .Net Connector.
Hi Karen - as long as the BAPI's / RFC's produce the same Request/Response XML when called from MII it should be no different than before. Of course you will still probably be testing things accordingly, but the xml exchanges between MII and R/3 should be the same.
Similar Messages
-
SAP GUI 7.10 Compatibility with ECC6 EHP4
Hello,
My company is on SAP GUI 7.10 Patch 8 and we are looking to install EHP 4 on our ECC6 system. Can someone tell me if we need to apply the latest patch to SAP GUI for EHP 4 support?
Does anyone know if there are known issues with SAP GUI 7.10 Patch 8 and EHP 4 if we do not patch?
Thanks,
PeteHello,
We did not find any issue with this, hope all goes well with you.
Thanks,
Prasant K Paichha -
SAP Mobile Platform 3 compatibility with windows server 2012
Dear All,
As per SAP release notes Window Server 2012 is compatible with SMP 3.0 but after installation i see that the SMP3 Services are always into the hung state meaning they neither start nor stop. They are always in the starting state. Whereas it runs fine with Windows Server 2008 R2. When we force kill all the process running with SMP3 Service we can stop it but it doesn't start at all.
Has anyone faced this issue till now.
ThanksHi Rakshit,
I guess Eric Solberg, Mustafa Saglam can answer better.
Rgrds,
JK
PS: Raise a SAP ticket.
Message was edited by: jitendra kansal -
4.7 archive compatibility with ECC6.0
Hi Guys,
We are currently working on ECC 4.7 and upgrading to ECC 6.0.
We have archived some tables data in ECC4.7.
Can we display the same 4.7 archived data in ECC 6.0?
Thanks,
Jack
Edited by: Jack anthony on Jul 21, 2010 12:43 PMWhat exactly do you want to know? They stated that even data that were archived with the compression methodes delivered with 3.1I or 4.6C would be readable every higher release.
Until now I have not had any problems reading the archives I made in 4.7 - but mind you: I only looked into archived IDOCs ... -
how to upload file using irpt page and store the file in sap mii web folder?
hi,
I make it working,
This code is to get the Select file information and post to
the transaction as input .The information is written in sap mii using the transaction with Write action.
regards
vinod -
Hi
We are deploying the SAP MII Batch manufacturing Rapid deployment solution.After deploying the package and setting up all the config guide, we have following concerns.
1. The orders are coming in operator dashboard but can not see work instructions (PI sheets contents).
2. Also , in the confirmation screen , can't pull the orders.It is always coming 0 even the records are there.
3. The data which is supplied with package is in German format. Is this OK or have data in English as well.
4. Have deployed the package on oracle database so have issue converting some of the SQL server data into oracle.Means we have to convert script into Oracle scripts and hence some statements through errors and all the master data in the table is not updated.
5. We are using plant name as PL99 instead of 1000 , will this have any issue.
Any kind of help is appreciated.
Thanks & Regards
VinodInstead of directly submiting these jobs.
in the Job definition screen if you right click on job definition
you will get a option new job definition it will give several option
use the one you require and go next next this inturn submits the jobs you mentioned. -
SAP R/3 4.7e compatable with Netweaver foundation ?
Hi,
could you please suggest me for below Queries .
1. Does IS-Media is very much compatable with 4.7e?
2. Will this present problems for us in any of the functionality we've
been expecting? Does 4.7
have the same Netweaver foundation, integration with XI and
Portals, etc?
3. Can i integrate 4.7e with other new dimentional products like
Solman3.2,XI,BW3.5,Portals , etc ?
4. Which SAP release is recomandable for IS-Media to work? 4.7e or ECC ?
I appriciate if you could suggest me for this.
Thanks,
AhmedEven in Sandbox landscape having R/3 & XI on the samebox is not recommended.
Moreover SAP R/3E & XI 7.0 don't have the same WebAs version(R/3 WebAS- 6.40 & XI WebAs -7.00). Hence they cannot be installed due to product compatibility. It should be atleast ECC 6.0.
-SM -
Performance issue with custom IDOC download into SAP MII
Hi,
We have a custom IDOC which has ten fields. We take the data from these ten fields and insert into database. The issue is
we have some where around 4500 idocs flowing into SAP MII and then from SAP MII to sql database. The time taken for these idocs is around 30 mins.
Is there a way where we can improve the performance in terms of time taken?
Additional information is
MaxReaderThreadCount has been set to 5 in Configuration Management -> Infrastructure -> Application Resources
sample idoc structure
<IDOCNAME>
<FIELD1>val1</FIELD1>
<FIELD10>val2</FIELD10>
</IDOCNAME>
Please let us know if more information is needed.
Regards,
Manish JainHi Manish,
My thinking about the queuing is that for each transaction, you are calling your database and passing in the IDoc content. Depending upon your system, database, transactions, etc., you may be having to establish a connection between MII and the database each time you process an IDoc. Each "handshake" takes a finite amount of time. So queuing up the IDocs, establishing a single DB connection and processing large numbers of IDocs in a batch might reduce your processing time substantially. Something worth investigating.
I don't think that adding additional IDoc Listeners for different IDoc types will work if the source ECC system is the same for each type. It will simply use the first one it finds and process all the types there.
Additional threads may improve performance and is certainly a low risk, easily implemented test. Just do it in small increments as you can add too many threads (check with the NW administrator) and lock up your NW system.
And you may want to check with your DBA to see if there are limits on the connections which MII can establish for uploading the IDoc content (or for that matter, any other improvements to be made on the DB side).
Regards,
Mike
Edited by: Michael Appleby on Feb 10, 2012 2:37 PM -
CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0
Hello,
What are the compatibility issues for EHP4 FOR SAP ERP 6.0 Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
Following are the System Details:
Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
Component: SAP_APPL
Release: 604
Support Pack: SAPKH60402
Level: 0002
Existing CRM 5.0
Component: BBPCRM
Release: 500
Support Pack: SAPKU50006
Level: 0006
Thanks,
AG
Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PMHi Amirsd,
You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
It would run in 7 phases including downtime phase.
Let me know if you have any queries. !!!!
Regards,
Shobhit Garg -
Developer Denied Permissions to Open SAP MII Workbench even with permission
Hello,
I have recently added a developer with the following permissions in UME:
SAP_XMII_Super_Administrator
SAP_XMII_Administrator
SAP_XMII_Developer
SAP_XMII_User
We are using SAP MII 12.1 Patch 6 (build 96). Netweaver 7.1. We are using Windows Vista for OS and Internet Explorer 7 for our browser (even has the Java Plug-in disabled). We are using Java 6 version 20 for our JRE.
He can see the MII homepage and can navigate to Data Services -> SAP MII Workbench. However, when he clicks the link, he gets an authentication dialog box with the following following fields:
SAP MII Server Name: ______________________________
Port: 53000 (which I find odd that it initially is set to 53000 when he experiences this problem; our port is 50000)
User name: __________________________
Password: ________________________
He enters the information correctly (even sets the port to the correct setting which is 50000) and he gets the following error: Connection refused: connect
He can activate the workbench on my machine (I believe our labtops are analogous) so that leads me to believe he might have a conflicting process. Any help/suggestions would be great!
Thanks
AaronI have encountered the same error in the past. It results from blocking the Java components.
After launching the Workbench, I get a Warning pop-up with the message that "Java has discovered application components that could indicate a security concern". The warning then asks if I want to block the components. In my haste I never read the warning and kept clicking on "Yes" which leads to the exact same result you encountered.
The solution for me was to click "No" and allow the component to run. -
Standard Screen Element Changes with ECC6.0 in SAP Standard Transactions
Hi,
We have upgraded our system from 4.7 to ECC6.0. I need documentation on all GUI changes with ECC6.0 for all SAP transactions/modules.
I mean, for example, if Sales Order creation screen (transaction code VA01) in 4.7 have say... 12 tabs, then if it has 13 tabs (standard features I am talking) in ECC6.0. I want these kind of additional chnages done to screens like.. adding new menus in menu bar or buttons on tool bar etc.
As we need to educate our users for all the screen related standard chages by SAP because of upgrade.
Thx in advance,
NageshOfcouse Nishanth, u need to code in PBO and PAI event.
PAI -> To read the User input and for doing validations or some thing as per ur requirement
Hope this helps,
Shiva kankanala -
Seimens HMI Integration with SAP MII
Dear MII Experts,
We are trying to integrate shop floor systems with SAP MII for discrete manufacturing industry.
I came across the client has 70+ machines in the plant .the vendor is "DMG"
Seimens HMI is installed on each machine .
What are the possible ways here to connect to PLC from MII
I am very new to this integration part .
Can MII directly connect to Seimens HMI .
I am very new to this area , client is ready to pay extra cost for any extra interfaces .
Please suggest me the architecture to follow .
Please give me a detailed explanation here , please correct me if I my explanation is wrong here
Please reply me for any other clarificationHi Eswaraiah,
To access the PLC data in MII, you would need couple of things more.
1. OPC Server where the PLC stores the data.
2. PCo (SAP Plant Connectivity) that can read the data from OPC Server and send the data to MII for manipulation.
From PCo MII can read the data and you can then perform your business logic. Also, PCo has built-in notification settings which can trigger MII's transactions based upon some conditions.
So I believe, your landscape would look like
Siemens HMI --> OPC Server -> PCo --> MII
Check these out...
PLC Integration with SAP MII
Connecting MII to PLC devices
Communicating with PLC
Regards
Tufale Ashai -
IND780 Intergration with SAP MII
Hi Experts,
Greetings.
previously,I have done integration with MES system but i have a new requirement to Integrate Mettler Toledo IND 780 with Ethernet/IP communication.
I have visited the plant and this is the process they follow.
They have connected the Terminal to a PC and they send orders to the Terminal by uploading the excel file to a batch program and retrieving data to excel file by connecting to terminal.
I have gone through the blogs have know that Mettler Toledo IND780 uses SQL CE database to store data.
Can SAP MII directly connect to SQL CE database which is embedded in Mettler Toledo IND780 for data querying ?
Please guide me
Appreciate your help
GouthamHi Goutham,
According to the documentation available from Mettler Toldedo, the option to implement Ethernet/IP also includes the option to implement Modbus TCP. You can use Modbus TCP with an OPC Server that provides a Modbus TCP driver (Kepware or MatrikonOPC both have this). SAP Plant Connectivity (PCo), and SAP MII are the SAP components needed to integrate the scale and the OPC Server to SAP MES or ERP systems.
Another option would be to implement the communications via the scale Serial Port if present. This would require an external Hardware Serial-Ethernet server to put the serial port on the plant network, and then PCo and MII for the SAP integration components. there is an internal Ethernet port on the IND780 main board, but I did not investigate whether you can communicate with the scale using the same protocols as the serial port, If this is possible, then the Hardware Serial-Ethernet server is not required.
Either solution will require detailed knowledge of the communication protocols to determine the OPC Server, PCo and MII configuration, and MII transaction requirements, to implement the interface.
I would recommend against trying to directly attach to the SQL CE database on the scale.
Regards, Steve -
SAP ProductCosting in parallel by plant (same company) with ECC6.0 and EHP5
Hi SAP Community,
I did hear rumours that with ECC6.0 and EHP5 it is possible to execute product costing per plant in parallel, even the plants belong to the same company code. Currently, the lock is on company code level, means if I try to create a second background job with a plant belonging to the same company code, I am getting an error message.
I checked the SAP release notes for EHP5 but didnt find any direct related information.
ThanksHi,
Did you check note 1415153 ? This seems to explain the new functionality
regards
Waman -
SAP B1 compatibility with Windows VISTA
hi all,
SAP B1 2005 B with PL 40 is successfully installed in SERVER with WIN server 2003 and even 2 client system with Window's XP installed with SAP B1 2005 B client with PL5 and upgraded automatically to PL40 while connected to the SERVER. But when working with Windows VISTA it installed the client of SAP B1 2005 B PL 5 properly, but at the time of up gradation to PL 40 by connecting to the SERVER (which is a automatic process) it is throwing error and stop up gradation.
i would like to know that how much SAP B1 is compatible to WINDOWS VISTA.
Is there any other process to upgrade SAP B1 in VISTA.
regards
sandipHi Sandip
Please take a look at SAP Business One Supported Platform at https://websmp205.sap-ag.de/smb/sbo/platforms
Plus, some threads:
Re: Vista and SAP Business One - Yes or No ?
Re: Vista and B1
Hope it helps.
Regards,
Jacqueline Jiang
SAP Business One Forums Team
Maybe you are looking for
-
Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive? In other words, becau
-
Adobe Photoshop CS5.1 Trial "Stopped working"
Hello all. I am new to adobe photoshop and was wondering if anyone could help me. I have finished downloading and installing Adobe Photoshop CS5.1 (the trial) and when I try to open a picture or do anything else I receive a pop up telling me Adobe Ph
-
I am having issues with opening pdf files directly from website on safari.
i cant open any pdf files from safari. the page goes blank when the link is clicked. the same, however, can be easily viewed upon and saved on chrome or firefox.
-
IBolt dock w/ music and navigation enabled - Line out speaker glitch
This has happened 4 times since the JB update when in the car dock mode while cradled in the iBolt. connection: - cradled in iBolt dock - connect line out to vehicle input jack - enables car dock mode steps: - play a music app - start navigation app
-
After looking at the forums. I see that you can't burn a HD DVD for all Players. So forgive my rookiness here. I use a Canon XHA1 HD to film in. My questions are. Can you burn an HD DVD for use in all DVD players. If not what would you recommend to d