SAP MII 15.0 released for all customers?

Hello,
Is the product SAP MII 15.0 released for all customers or is it still in Ramp-up?
Best regards,
Pekka

Pekka,
The MII 15.0 release is currently in Ramp-up (started back in May 2014) and is planned to exit Ramp-up in Mid-November 2014. There is also a Feature Pack that is currently planned for release in January 2015 which will provide additional features and enhancements to the 15.0 release.
Hope this helps,
Sam

Similar Messages

Is verizon waiving fees for all customers affected by hurricane sandy?

is verizon waiving fees for all customers affected by hurricane sandy?

http://news.verizonwireless.com/news/2012/11/pr2012-11-04a.html
http://news.verizonwireless.com/news/2012/11/pr2012-11-05.html
http://news.verizonwireless.com/news/2012/11/pr2012-11-04.html
You should check out any other press releases for additional information about the recovery of the Verizon Wireless network after Hurricane Sandy.

XL Reporter- Report by Sales Rep show the same sales rep for all customers.

Hi,
When creating a report using XL reporter, Sales report by Item detail for all customers with selection by Sale rep ( expression) parameter, the report shows the name of the first selected sales rep name all through the report.
Please comment if there is any way to avoid this error.
Regards.

Thanks for the reply!
No, Since this is a sales by item detail report, we have already grouped it by Brand....
We do not want the report to be seen grouped by Sales rep, as that would group all transactions under different brands under one group.....
Regards

Exclusion - For all customers, except one

Is there a simple way to create exclusion for ALL customers, except XXXXX?
There are approx 20,000 customers, across multiple Sales Orgs.
Would like to exclude 100+ products from 19,999 customers
Is there are way to set up products for only one customer to purchase?
Listing will not work.
Considering multiple levels of exclusion to get to the 1 customer, but searching for an easier method.
Thanks.

Hi Tom,
I think Listing will work.
What if you make a single material group for all 100+ products and create condition record in Listing for this material group and that particular customer ??
I think it should work.
Share your feedback
Sagar

Can we run F.28 in back ground for all customers.

Hi ,
Can we run F.28 for all customers in Back ground.
Thanks in advance.

Yes
you can schedule this in the background
this will be like any other batch job you schedule
you will have to give the customer range that you want to execute or upload a list of customers befo9re you click on execute in background
hope this helps
Thanks
Prashant

SAP Business one Manual / Documentation for all Modules

Hi,
SAP Business one Manual / Documentation for all modules is required by our client.
The details should include screen wise explanation of each and every form in the SAP Business one package for all modules.
Please provide me with link so I can download such information which would be useful for the User post implementation.
Regards,
Siddhesh

hi siddesh,
Best user manual is context help available in B1(Press F1/ ? mark),It is also available
in this link for 2005 & 2007 Versions.
http://help.sap.com/saphelp_sbo2005b/helpdata/en/1d/48a291fc4a0448bbc8dacd344e956c/frameset.htm
Crispy overview of all topics can be available in wiki page
https://www.sdn.sap.com/irj/scn/wiki
More documents is available in service market place which requires s-userid & password.
http://service.sap.com/smb/sbo/documentation.
Edited by: Jeyakanthan A on May 15, 2009 4:33 PM

Report for inquiries for all customers and material

how can i see a report of all inquiries of all customer and materials is there any predefine report in sap
we do have va15 but it does not list depending on the custmer or material, how can we do it for all customer
thanks

Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regards,
Rajesh Banka
Reward points if helpful.

Need Standared report for Open Sales order for all customers

VA05 is not useful as it gives this list for individual customers.
We need to see a list of all open orders for asll customers in one report only.
Thanx in advance.

Hello,
did you try with transaction SDO1 - Orders Within Time Period? If it doesn't fit your requirements I suggest you to create a query.
Best regards,
Andrea

Dunning Letter Email for all customers

Hi All, I need your help in my requirement, which goes like this :- In F150 tcode(ecc 6.0), which internally uses RFMAHN20 program to display all customer accounts, we can select a customer and see the dunning letter(It's a sapscript) and also take a printout. I made some changes accordingly to add the email functionality so when user checks the print preview then a pop up promts for email address( which has default value of email address assoicated with that particular customer) and send pdf letter accordingly. But my requirement is to send email to all customers who may be selected via RFMAHN20( they may be all customers who belong to the same account type). How can we achieve this in the most easy way? I already copied standard FM's associated. So can I do something in them to resolve this or any separate program is needed( if so, how?)? Please respond asap. Thank you so much...in advance

Hi Husain...Thanks for immediate response. There is already data being pulled by standard function modules like PRINT_DUNNING_NOTICE(copied into Z). Can we use that in simpler way(without the need of any new driver program with all the data population again)? And your answer is correct which I already thought earlier and kept it as a last resort, because I need to populate all the data again, convert spool to pdf and send pdf's to all selected customers And one more thing is that the requirement is to schedule a background job which takes care of sending all the emails . So any more ideas?

Generic Templates for all customers

Dear experst,
can I use in the PI a generic template for different customers sending messages via PI.
That means the sender is 1 : N customers.
Please advice how we can do it.

hi,
That depends on what it's a "generic" for you and what is exaclty your flow: which receiver adapter ?
but yes you can do it in by adding several receivers in the Receiver Determination... if the receiver CC should be different... that means if receiver folder / filename should be differents (for instance, if it's a file adapter). Always in Receiver Determination you can define a condition for the routing to different receiver, else every time ALL receivers will receive the info.
regards
Mickael

Making invoices for all customers

Dear Experts,
Our company has a promotion program every year , mostly will execute during end of year... There's a item that we will distributed free(or will special price) to all customers... if we make an invoice each customer , it will takes a lot of time.
Any one can show the ease way using sapb1?

Hi Susan
You could try to use DTW to import those invoices,
or program a little addon based on DIAPI to fulfill this.
Regards,
Syn Qin
SAP Business One Forums Team

OB45 Default Credit for *all* customers ?

in OB45, you can set a Risk Category and Credit limit amount for all newly created customers.
Problem is, this will create a record in KNKK even for customers who may have no reason for a credit limit.
For example: I want credit limits initially set for any Sold To.acct group 0001, but for Ship To (0002) or Plants (PLNT) I have no reason to create a credit limit.
So the question is: Why can't I OB45 for a specific Account group(s)? It's all or nothing, and this just doesn't make sense to me. Does anyone know of another to way to accomplish this, beside just manually creating FD32 for each new customer?
When I create a Sold to 0001 customer, I want it's risk category and credit limit amount defaulted to set values.
Thanks in advance
Bill

dear mooseman,
let me divide your question into 2 parts:
1. In OB45, you can set a Risk Category and Credit limit amount for all newly created customers.
Problem is, this will create a record in KNKK even for customers who may have no reason for a credit limit.
1.A. it will create the credit limit for all the new customers created. In such case remove CCA for the new customer in XD02 and see. or go to OBD2 supress CCA and check.
2. So the question is: Why can't I OB45 for a specific Account group(s)? It's all or nothing, and this just doesn't make sense to me. Does anyone know of another to way to accomplish this, beside just manually creating FD32 for each new customer?
When I create a Sold to 0001 customer, I want it's risk category and credit limit amount defaulted to set values.
2.A. some times we have to fiddle the system, so please supress CCA for those customers you are not allowing any credit limit.
please check the system and come back with queries.
regads,
balajia
Edited by: balaji timmampalli achari on Nov 17, 2010 6:32 AM

SAP QM Default Inspection Plan for all Inspection Lots created in the Plant

Scenario: We have a Proto type plant in which Daily 15 to 20 materials are created every day. We have only one inspection plan for all the materials.
Problem: We don't want to do material assignment in the Inspection Plant header every time a new material is created
Requirement: Is there any way to default the inspection plan for all the inspection lots created in the Plant by Standard Configuration or User Exit.
Your answers will be much appreciated and rewarded.
Thanks in advance,
Thiyagu

Hi,
In our case Creation of Inspection lots are controlled by QM View of Material Master. Our problem is to find alternative for assignment of New Materials in the Plan header in Tcode QP02, as we have only ONE INSPECTION PLAN. So our expection is all QM Inspection Lot created in the Plant should always get assigned to the SINGLE INSPECTION PLAN, with out doing any assignment of material in the Plan.
Thanks,
Thiyagu.

Display Trade Price for all Customers - Trade Price maintained at Material

Dear All,
I have a specific requirements, for which there is a data model as:
1] Primary Sales: stored in an InfoCube (Level at which data is stored- Material/Customer)
2] Secondary Sales: stored in an ODS (loaded through Flat File) (Level at which data is stored- Material/Customer)
3] Trade Price: stored in an ODS (Custom data source) (Level at which data is stored- Material)
4] Query to report Primary/Secondary Sales on a MULTIPROVIDER based on the above 3 InfoProviders.
Requirement:
To display Trade Price at Material/Customer level in the query.
Since the Trade Price from the source (Custom DataSource) is available only at the Material Level. I get the query result as:
Current Result
Material   |   Customer   | Trade Price
100100    |   ABC          | <blank>
100100    |   PQR          | <blank>
100100    |   XYZ           | <blank>
100100    |    #              | INR 5.6
Expected Result
Material   |   Customer   | Trade Price
100100    |   ABC          | INR 5.6
100100    |   PQR          | INR 5.6
100100    |   XYZ           | INR 5.6
Request help from everyone on the same.
Thank you.
Regards,
KunalG

Hi,
Some how you can do it try with using Data Functions..
Check
http://help.sap.com/saphelp_nw2004s/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
Thanks
Reddy

How to apply free goods seen for all customers ???

Hi All,
Can anyone please tell me,Is their any difference between for/from in create free goods with inclusive/exclusive option..
Regards,
Ashima

hi,
if you create a free goods with inclusive option the free good item is inclded with the ordered quantity.
ex
customer has ordered 10 qty of product X
you have a inclusive 2 free goods set up for every 10 qty ordered.
inthis case customer will be billed only for 8 qty of product X and 2 are given for free.
if you create free good with exclusive option the free goods are given in addition to the ordered qty.
ex
customer ordered 10 qty of product X
you have a exclusive 2 free goods set up for every 10 qty ordered.
In this case customer is billed for the 10 ordered qty but will be delivered 12 qty of product X
Regards,
Krishna Prasad

SAP MII 15.0 released for all customers?

Similar Messages

Maybe you are looking for