SAP MII Monitoring Procedures

Hi,
We have SAP MII installed on CE 7.1. We would like to monitor MII processes, and underlying infrastructure for optimization. Are there any monitoring procedures, and docs available specific to MII?
I appreciate your help
Thanks,
Kris

There are no specific tools built into MII to do this monitoring. As Udayan sent you, your best options are to use the NetWeaver Tools. The Wily Introscope tool is currently being tested for MII and when completed would be the tool you would want to use. Currently it is available for MII 12.0 and 12.1will hopefully be out in the next few months. The 12.0 tool can be downloaded from Service Marketplace.
Erik

Similar Messages

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

Issue in executing SAPUI5 applications in SAP MII and Eclipse IDE

Dear Experts,
     I am interested to learn more about SAPUI5 which will be very useful for my upcoming customer projects.
     Regarding that i have followed certain steps from some other blog post.
     The steps that i followed are explained below:
          In Eclipse Kepler IDE:
               1. Download Eclipse Kepler IDE.
               2. i follwed the steps that mentioned in the url "https://tools.hana.ondemand.com/#sapui5"
               3. i created one SAPUI5 application project.
               4. i tried to run the sample file, but i am getting error as below
"JSR 356 WebSocket (Java WebSocket 1.0) support is not available when running on Java 6. To suppress this message, run Tomcat on Java 7, remove the WebSocket JARs from $CATALINA_HOME/lib or add the WebSocketJARs to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in $CATALINA_BASE/conf/catalina.properties. Note that the deprecated Tomcat 7 WebSocket API will be available."
5. Then i installed JRE 7, even after installing Java 7 i am unable to run the project. it shows sap.ui5 property file missed.
In SAP MII 14.0:
     1. I just copy and paste the Hello World program from internet into HTML file.
     2. I tried to execute it, but in that i am getting error as " sap undefined error, sap.core.js Script error, etc,.."
I am not sure about the steps which i was follwed as right.
Kindly help me out how to proceed on further.
Kindly guide me how to execute SAPUI5 application projects in Eclipse IDE and SAP MII 14.0.
I need the procedure to execute the same in Eclipse IDE by using Tomcat server and how to deploy the SAPUI5 in SAP NW.
The Components that i have in my System:
     1. Eclipse Kepler 4.3
     2. SAP MII 14.0
     3. JRE 7
     4. Tomcat 7
Kindly tell me, is there any other softwares required?
Thanks and Regards,
Santhosh K

Dear Experts,
     I am interested to learn more about SAPUI5 which will be very useful for my upcoming customer projects.
     Regarding that i have followed certain steps from some other blog post.
     The steps that i followed are explained below:
          In Eclipse Kepler IDE:
               1. Download Eclipse Kepler IDE.
               2. i follwed the steps that mentioned in the url "https://tools.hana.ondemand.com/#sapui5"
               3. i created one SAPUI5 application project.
               4. i tried to run the sample file, but i am getting error as below
"JSR 356 WebSocket (Java WebSocket 1.0) support is not available when running on Java 6. To suppress this message, run Tomcat on Java 7, remove the WebSocket JARs from $CATALINA_HOME/lib or add the WebSocketJARs to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in $CATALINA_BASE/conf/catalina.properties. Note that the deprecated Tomcat 7 WebSocket API will be available."
5. Then i installed JRE 7, even after installing Java 7 i am unable to run the project. it shows sap.ui5 property file missed.
In SAP MII 14.0:
     1. I just copy and paste the Hello World program from internet into HTML file.
     2. I tried to execute it, but in that i am getting error as " sap undefined error, sap.core.js Script error, etc,.."
I am not sure about the steps which i was follwed as right.
Kindly help me out how to proceed on further.
Kindly guide me how to execute SAPUI5 application projects in Eclipse IDE and SAP MII 14.0.
I need the procedure to execute the same in Eclipse IDE by using Tomcat server and how to deploy the SAPUI5 in SAP NW.
The Components that i have in my System:
     1. Eclipse Kepler 4.3
     2. SAP MII 14.0
     3. JRE 7
     4. Tomcat 7
Kindly tell me, is there any other softwares required?
Thanks and Regards,
Santhosh K

How to log in to SAP MII by using a custom xApp?

Hi there,
I'm developing a custom xApp with a context root of /mycustomapp
I use some security contraints for it so the user has to log in to view the xApp.
As I use some MII services the user has to be logged in to SAP MII, too. However, logging in to SAP NetWeaver doesn't automatically sign in the user to SAP MII, too.
Is it possible at all?
Accessing /mycustomapp leads to a login mask, but the user should be logged in to SAP MII, too.
Regards
Tobias

web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
id="WebApp_ID" version="2.5">
<display-name>mycustomapp</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<security-constraint>
<display-name>Authentication of Users</display-name>
<web-resource-collection>
<web-resource-name>My Resource Name</web-resource-name>
<url-pattern>/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>My_User_Role</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>MyRealm</realm-name>
</login-config>
<security-role>
<role-name>My_User_Role</role-name>
</security-role>
</web-app>
web-j2ee-engine.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="web-j2ee-engine.xsd">
<spec-version>2.4</spec-version>
<security-role-map>
<role-name>My_User_Role</role-name>
<server-role-name>My_User_Role</server-role-name>
</security-role-map>
</web-j2ee-engine>
Besides having the role My_User_Role my user also has the SAP_XMII_User role (and the corresponding developer roles).
Regards
Tobias My_User_Role

Java.lang.NoClassDefFoundError: com/sap/util/monitor/jarm/TaskMonitor

hi all,
i was trying to build and try a web service in my project.
but at runtime it keeps throwing the following error( log trace)
i am unable to figure out the source of error.
is it in the jco or anything else
thanks in advance
1.5#001143C809E500470000002E00000B8C00040CBB0F05957C#1139897457152#com.sap.engine.services.httpserver##com.sap.engine.services.httpserver#Guest#2####a9a4e0009d2011dacd42001143c809e5#SAPEngine_Application_Thread[impl:3]_16##0#0#Error#1#/System/Server#Plain###User Guest, IP address
HTTP request processing failed. HTTP error [401] will be returned. The error is [Cannot authenticate the user.No details available].#
#1.5#001143C809E500530000001F00000B8C00040CBB0FEBCF9E#1139897472233#com.sap.engine.services.ejb#sap.com/xappsospservicebundle~enterpriseapp#com.sap.engine.services.ejb#I020381E1#1839####b13de9b09d2011da944e001143c809e5#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Java###
[EXCEPTION]
#1#com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getRelatedReports.
     at com.sap.xapps.osp.orgmgmt.servicebundle.sbejb.OrgMgmtSBLocalLocalObjectImpl10.getRelatedReports(OrgMgmtSBLocalLocalObjectImpl10.java:121)
     at com.sap.xapps.osp.orgmgmt.servicebundle.facade.OrgMgtFacadeBean.getRelatedReports(OrgMgtFacadeBean.java:425)
     at com.sap.xapps.osp.orgmgmt.servicebundle.facade.OrgMgtFacadeLocalLocalObjectImpl10.getRelatedReports(OrgMgtFacadeLocalLocalObjectImpl10.java:103)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoClassDefFoundError: com/sap/util/monitor/jarm/TaskMonitor
     at com.sap.mw.jco.util.Jarm.getRequestMonitor(Jarm.java:57)
     at com.sap.mw.jco.JCO$Repository.getFunctionInterface(JCO.java:19069)
     at com.sap.mw.jco.JCO$BasicRepository.getFunctionTemplate(JCO.java:18151)
     at com.sap.xapps.osp.orgmgmt.servicebundle.common.OrgMgmtSBHelper.createFunction(OrgMgmtSBHelper.java:491)
     at com.sap.xapps.osp.orgmgmt.servicebundle.impl.OrgMgmtBusinessDelegate.getRelatedReports(OrgMgmtBusinessDelegate.java:1273)
     at com.sap.xapps.osp.orgmgmt.servicebundle.sbejb.OrgMgmtSBBean.getRelatedReports(OrgMgmtSBBean.java:170)
     at com.sap.xapps.osp.orgmgmt.servicebundle.sbejb.OrgMgmtSBLocalLocalObjectImpl10.getRelatedReports(OrgMgmtSBLocalLocalObjectImpl10.java:103)
     ... 27 more

hi,
thanks for the replies.
well i guess that(user authentication) is not the problem.
Coz that happens even before i start the web service.
i guess the problem is that the appl. is not finding the TaskMonitor class ( see the last 10 lines of the log).
does anyone have a solution for that.
thanks

To Retrive Folder List in SAP MII 12.0

Is there any option available in SAP MII 12.0 to retrieve List of Folders Available same as like Folder List Query in 11.5.

Hello,
try an XML Query with the following URL:
/XMII/Illuminator?Mode=TransactionFolderList&Server=XacuteConnector&Content-Type=text/xml
Filter the result by its "ParentPath" column to get a list of folders inside a provided parent folder. Make sure that you have increased the default query row count of 100 to get all folders on your system.
Hope this helps - good luck!
Matthias
Edited by: Michael Appleby on Jan 5, 2011 2:38 PM

Error in /LogoPage.html after deploying SAP MII 14.0 SP5

Hi Experts,
I am using SAP EHP1 for NW 7.3 SP07. Recently I upgraded from SAP MII 14.0 SP04 patch 5 to SP05 patch 2.
After Upgrading I am getting many issues as below:
1. When opening "http://hostname:port/XMII/" as file "/LogoPage.html" does not exist. When I checked the file its not exist in the server.
2. When opening web pages I am getting java alert as "The application contains both signed and unsigned code"like that.
I am using JRE v 1.6.0_21.
Is that problem with the Patch that I deployed or any other issue.
Please let me know?
Regards
G.Partheeban

Hi Experts,
I tried deploying with SUM,JSPM and telnet but no use. The file is not deployed properly. I guess this is the patch issue.
I copied the Logopage and other file missing. Now the issue "1" is fixed but I am getting the below
2. When opening web pages I am getting java alert as "The application contains both signed and unsigned code"like that.
I am using JRE v 1.6.0_21.
I also tried to revert back to SP04 using JSPM with the command "UpdateAll" and "UpdateSameand Lower" version. Can any one please suggest me how to revert back or how to solve the above errors?
Regards
G.Partheeban

SAP MII 14.0 unable to open workbench

Hello Experts,
I am facing issue while opening workbench .
The exception thrown is as below :
"com.sun.deploy.net.JARSigningException: Found unsigned entry in resource: http://[sever]:[port]/XMII/CMSLogicEditor/xalan.jar"
I am using SAP MII 14.0 SP5 Patch 7 & Java 1.7 update 45.
I have deployed pdf jar & fop jar yesterday but deleted back fop yesterday itself .
In my temporary java resource files(control panel->Java->General ->Temporary Files -> View ) ,I see xalan & serializer jar updated date yesterday ,not sure if has anything to do with this.
Please help on this issue.
Thanks & Regards,
Neha Kshirsagar

Hi Swaroop ,
We are currently using jre 1.6.31 or versions of 1.7.45.We have already tried few workarounds regarding this with enabling certain Java settings ,but nothing has worked till now.What I feel that this could be some java setting on server system issue or netweaver cache isn't cleared .
Please fnd below screenshots as your request
Thanks & Regards,
Neha Kshirsagar

SAP MII 14.0 - Calling Transactions using SOAP Runner fails

Hello All,
We are calling transactions in SAP MII 14.0 from external apps using SOAP Runner and we are passing the login info in the payload. But we are getting the following error.
We are passing the following in the payload.
<xmii:LoginName>Username</xmii:LoginName>
<xmii:LoginPassword>Password</xmii:LoginPassword>
We are getting 401 unauthorized as the user name and password is not propagated to the MII.
It works if we supply the info explicitly when we invoke the URL.
Thanks,
Kiran

Hello Rajesh,
I don't think that will be allowed. We usually pass the credentials in the payload and it has always worked for us in MII 12.1. But in MII 14.0 it does not seem to be working.
Thanks,
Kiran

Reading File from a Desktop/ShareFolder in SAP MII 14.0

Dear Experts,
I have a situation where I want to read a CSV file from a source different than SAP MII server. Basic intention is to read a file from a desktop or some shared folder.
My first doubt is- Is it really possible in SAP MII 14.0 version?
But still I tried doing the same. Used Get File Text Loader action and text loader and provided file path from desktop which gives me an error. Here's the syntax I tried with mask as .csv:
C://Users/XXX/Desktop
C:\Users\XXX\Desktop
C:/Users/XXX/Desktop
Error I get is as follows:
[ERROR] [Get_File_List_0]GetFileList: Access to the file path /C://Users/XXX/Desktop is not allowed
Please advise, if it is really possible in MII 14.0 . If yes, Am I missing any steps?
Regards

Hi Kirti
To read/load a file from your desktop you will need to execute some form of client side program like HTML or JS or applets. MII Transactions run on the MII server and would point to the Server's C:/ if the server has such a folder. Usually users do not have access to C drive of servers. Hence you see the error.
You will need to write some program that executes on your desktop and pulls the file from your system and then posts to the server.
Regards
Partha

Unable to Pass Parameters to I5Grid in SAP MII 14.0 SP05

Hi Experts,
There was a bug in SAP MII 14.0 SP04 where we were unable to pass parameters to I5Grid dynamically. I understand that this bug has been fixed in SP05 , so we applied following patches:
Patches installed :
a) XMII05P_4-10008694.SCA
b) XMII05_0-10008694.SCA
Note details mentioning this issue :
2016927 - I5Grid does not take into account overridden parameters when updateGrid(true) is called
But even after applying these patches, I am still not able to pass parameters to I5Grid dynamically from irpt page. Does anyone have any insight to it? Is it working for any one of you?
Regards,
Kirti

Hi Chirstian,
I see this change working. I was doing a mistake while passing parameter to I5grid.
What I was doing-
Grid.getQueryObject().setParameter(1, linename);
Correct Way:
Grid.getQueryObject().setParameter("Param.1", linename);
Thanks & Regards,
Kirti

Generic Sort filter in SAP MII 14.0.5

Hello,
I am trying to use Generic Sort filter in SAP MII 14.0.5 and all i need to achieve is sort the XML nodes based on values. i am trying to give input as below XML and sort based on Value. but i am getting error. Input to Generic sort filter is mentioned below. i don't see much documentation for this block. any inputs will be greatly appreciated.
Error:-
"[Generic_Sort_Filter_0] Unknown property: <?xml version="1.0" encoding="UTF-8"?><Address>
<Product>MAC_Address</Product>
<value>78FF5700E419</value>
<value>78FF5700E418</value>
<value>78FF5700E420</value>
</Address>"
Input to Generic Sort Filter:-
Source:-
<Address>
<Product>MAC_Address</Product>
<value>78FF5700E419</value>
<value>78FF5700E418</value>
<value>78FF5700E420</value>
</Address>
Filter Colum1:- Local.OutputXML{/Address/value}
-Adarsha.K.S

I could be wrong but I seem to recall that Action only supported the MII xml document structure: /Rowsets/Rowset/Row etc.

SAPUI5 in SAP MII 14.0 - error on running index.html

Dear All,
I am working on SAP MII 14.0.
I am trying to run a sample example on SAPUI5 implementation in SAP MII 14.0 taken from link: http://scn.sap.com/community/manufacturing/mii/blog/2013/03/21/making-engaging-ui-on-sap-mii-with-sapui5
But I got an Error when I tested index.html page !!
Problem Description:
My index.html code is :
<!DOCTYPE HTML>
<html><head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<script src="/sapui5/resources/sap-ui-core.js"
                      id="sap-ui-bootstrap“ type="text/javascript"
                      data-sap-ui-libs="sap.ui.commons,sap.ui.table,sap.viz, sap.ui.ux3"
                      data-sap-ui-theme="sap_goldreflection" >
</script>
</head>
      <body class="sapUiBody" role="application">
      <div id='plantkpiDiv'></div>
<script>
alert("1"); // this comes
//register the application
jQuery.sap.registerModulePath("kpidashboard", "/XMII/CM/547555/SAPUI5/kpidashboard/webcontent");
alert("2");   // this comes
//instantiate the view
var plantView = sap.ui.view({id:"idPlantView", viewName:"kpidashboard.PlantView", type:sap.ui.core.mvc.ViewType.JS});
   //add the view to the div
alert("3"); // this does not come
plantView.placeAt("plantkpiDiv");
   </script>
       </body>
</html>
Folder Structure in Workbench is as follows: /XMII/CM/547555/SAPUI5/kpidashboard/webcontent
Inside webcontent I have created three files i.e. PlantView.controller.js , PlantView.view.js and index.html.
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)
Timestamp: Tue, 11 Mar 2014 10:32:30 UTC
Message: Unterminated string constant
Line: 13
Char: 260
Code: 0
URI: http://inpuneme01:50200/XMII/CM/547555/SAPUI5/kpidashboard/webcontent/index.html?JSESSIONID=G59R-clhqrId7QDW_a_VBOSXQqyvRAEC2ZsB_SAPqh1fgxWruoAQAKceTGLKZ-6J
Message: failed to load 'kpidashboard.PlantView.view' from /XMII/CM/547555/SAPUI5/kpidashboard/webcontent/PlantView.view.js: SyntaxError: Unterminated string constant
Line: 41
Char: 11332
Code: 0
URI: http://inpuneme01:50200/sapui5/resources/sap-ui-core.js
Thanks and Regards,
Anshul Arora

Hi Rohit,
I checked and found that PCo Mgmt service was not started. SO I started it and now I am able to get the XML when I open PCO Mgmt URL in the browser of PCo Server
But,
When my agent is running, I don't get Browse button enabled in "Subscription Items" tab.
When I stop the agent instance, I can see Browse button enabled in "Subscription Items" tab. But when I click on browse, it gives me following error:
Not sure what's wrong?
Soham

SAP MII function issue in SAP MII 14.0

Hi,
Currently I was working on some content up gradation work in SAP MII 14.0 , but while working, I have got a strange think regarding SAP MII Functions. We have developed the same code in SAP MII 12.2 and faced the issue while migrating to 14.0. The issue is as follows,
The function we have used in 12.2 is getvalue(name) as in the below screenshot,
but while we have migrated to 14.0, then we saw the function has updated into getvalue(map, key) in 14.0
I have no idea why parameter of the existing function got updated, but the problem is if someone want to migrate the existing code from 12.2 to 14.0 using such of function then he/she can get a "Conversion Exception" and at that time it will become bit hectic to identify the issue and change the logic to handle this in all the places.
Regards,
Suman

Hello Suman,
I guess it is a bug in MII 14.0. The help doc has the getValue(name) still. However, the newer function is not present in the same. I guess it was not documented. I guess, the getValue(map, name) is a newer function which somehow replaced the older one.
I would suggest you to raise a support ticket. According to me, the getValue(name) and getValue(map, name), both should exist.
Regards,
Tufale Ashai.

Issue with SAP MII Batch RDS

Hi
We are deploying the SAP MII Batch manufacturing Rapid deployment solution.After deploying the package and setting up all the config guide, we have following concerns.
1. The orders are coming in operator dashboard but can not see work instructions (PI sheets contents).
2. Also , in the confirmation screen , can't pull the orders.It is always coming 0 even the records are there.
3. The data which is supplied with package is in German format. Is this OK or have data in English as well.
4. Have deployed the package on oracle database so have issue converting some of the SQL server data into oracle.Means we have to convert script into Oracle scripts and hence some statements through errors and all the master data in the table is not updated.
5. We are using plant name as PL99 instead of 1000 , will this have any issue.
Any kind of help is appreciated.
Thanks & Regards
Vinod

Instead of directly submiting these jobs.
in the Job definition screen if you right click on job definition
you will get a option new job definition it will give several option
use the one you require and go next next this inturn submits the jobs you mentioned.

SAP MII Monitoring Procedures

Similar Messages

Maybe you are looking for