SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

Dear Sir,
During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
1.PO
2. GR with excise capture& post here Part-I&II are genarated.
3.Invoice
4.Return delivery with reference to above goods receipt document.(122 m.type)
5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
JTAX Access sequence missing at the time of excise invoice creation in J1IS

The same error coming while consignment stock issue to cost center.
1.Consignment Info record with excise tax code.
2.PO consignment purchase order.
3.GR with excise capture & post here Part-I&II documents are created.
Material document created but there is no accounting document.
4.While doing Consignment stock issue to cost center system generate an error message
Access sequence JTAX missing ( ) Message no. VE306"

Similar Messages

Error in Access Sequence

Dear All,
Following is the case.
Condition Type values are picked form condition record having access sequence based on sales organization.
Now we want to pick the values based on Sales Organization and Material. So we added the required condition Table in the access sequence JDUM. This table already exists in the system and is not created. But after adding the table in access sequence and maintaining the values the system is giving following error.
749 Access Pricing Sales/Distribution JDUM 30 contains no fields
When i go the IMG --> SD --> Basic Function --> Pricing --> Pricing Control --> Define Access Sequences
Select the Access Sequence "JDUM" & when select the fields system flashes the message as below
The field assignment has not yet been made
Please guide me on the same.
Thanks in advance
Shailendra Panhale

Shailendra,
When you say 749 it means that its new access sequence created. Because by default access sequence existing in JDUM are tables
110 Sales org./ Destination Country
350 Sales organization.
1. When you create Table "Release status and Processing status" should be active. -- Please Check
2. AFter Creation of tables , we assign it as Access Sequence. save it
3. Then choose the Access line and double click on the Fields tab provided.
4. Then the fields corresponding to the access sequence will be listed with last fields as Relase status and Processing status.
Please check
Regards
Sathya

SAP GUI710 installation error like Access Denied (error code -2147024891)

Hi Guys,
im getting error while SAP GUI710 installing, error like "Access Denied (error code -2147024891)"
pls help me if any one know.

Hi,
One of the reson for this may be the login ID which you are using is not the owner or the does not have the Admin. rights... Please check it.
Patil

Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

My time capsule says it only has 473.24 gb for my back up of 534gb. the only back up I can access when I enter the time machine was yesterdays so what has happened?

my time capsule says it only has 473.24 gb for my back up of 534gb. the only back up I can access when I enter the time machine was yesterdays so any idea what is happening? I have the latest irmware update.
Marmimag

There is an issue with latest Lion update.. it is killing TM.
https://discussions.apple.com/message/19858557#19858557
Otherwise check via the airport utility if there is something else using space on the hard disk.

Error: Obligatory node 'E1MAKTM' missing in the structure

Hello All
   I extended material master IDOC.
After extending, the segments look like this:
ZMATMAS05
     - E1MARAM
            - ZEXTENDED_SEGMENT
            - E1MARA1
            - E1MAKTM
            - E1MARCM
so on and so forth.
When I create idocs, I get a message saying that the message is successfully sent. When I see in SM58, I see the message "Obligatory node 'E1MAKTM' missing in the structure".
The idoc which is created has E1MAKTM segment, but it is still giving the error.   Am I extending at the wrong position?
Thanks
Naga

looking at this
ZMATMAS05
- E1MARAM
- ZEXTENDED_SEGMENT
- E1MARA1
- E1MAKTM
- E1MARCM
makes me just feel that all your segments are at the same level.
but usually the E1MAKTM is a sublevel to E1MARAM
so it should look like this:
ZMATMAS05
- E1MARAM
- -ZEXTENDED_SEGMENT
- -E1MARA1
- -E1MAKTM
- -E1MARCM
- - -E1MARDM

Error during excise invoice creation

Hi everybody
The user has accidently entered one more line item during delivery with qty "0" and value "0" along with a standard item with item cat "tan" which has value and qty. Subsequently he has done PGI, Billing and Release to accounting. So the system is taking the second line item with qty "0" as text item. . But while posting excise invoice wrt billing doc. using tcode J1IIN the system is throwing a error
"Customisation for plant missing in table plant settings" Message No 8I303, Diagnosis: The customisation details have not been maintained for this company.
So far we have done more than 10000+ invoices with excise posting without any error. This is the first time we are getting this error because of accidental entry of a second line item with qty "0" by the user..
Please help how to solve this error. The billing document cannot be cancelled because it has already reached the customer and he is going to make payment wrt billing doc.
Thanks

Hi Everyone
Thanks a lot for your responses.
As time was running out the only option was to delete the line item with "0" qty and value (item cat. tatx) at the table level. Once deleted there was no problem in creating excise invoice using tcode "JIIIN" wrt commercial invoice.
Though this is not SAP recommended best business practice, this option had to be taken or else we would not have been able to open the MM posting periods (mmpv) for the next month without closing all the entries for the previous month.
And if we do not open the mm posting periods we cannot goods issue for the next month.
Thanks & regards
satish

Error in excise invoice creation for differncial price invoice

Dear all,
When i am going to create outgoing excise invoice for differncial price invoice
i am having the error - "Reference document of 10006893 is not delivery document
Message no. 8I681"
Can somebody give me solution where to make settings in configration or else.
Archana

Kindly refer following SAP Note
Note 1251126 - Excise Invoice created for Billing document wrt Sales order
Symptom as suggested by the above SAP Note is:
In the scenario where billing document is created with reference to the Sales order, the reference document for billing document is not delivery and it is possible to create multiple billing documents wrt the same Sales Order.
In such a case, the excise invoice should not be allowed to be created with respect to such a billing document through the transaction J1IIN.
However, current the system is allowing excise invoice to be created wrt the first billing document for the sales order and then for the subsequent billing documents, the following error message is displayed - Modvat utilization done message no 8I 446. This is incorrect.
This note contains the corrections for not allowing the creation of the excise invoice for these billing documents.
Hope it assist your cause.
Thanks & Regards
JP

Access + asp + working half the time....

So, I have been going through the forums and books and cant
seem to find an answer to my problem...I have gone through all the
online documentation and bought the book Dreamweaver 8 with ASP,
Coldfusion, and PHP (Jeffery Bardzell) and have finaly got a my
pages to work.
So...we have a local intranet with a basic form that is just
radio buttons, that then saves to an access database for easy
look-up later....customer survey....do you like the product (1-5)
etc...
Very basic, only 4 questions. The site is coded in .asp and
is hooked up to an access database that works perfectly. It saves
the results and I can display them just fine....most of the time.
I can go to the page and fill in the form 1 time, then i
click submit and it says it saved just fine, i check the database
and in fact it did. Then i go to fill in the form again and when i
click submit this time i get a page cannot be found error. I clear
all the cache and cookies...load the page up and most of the time
it will work correctly again....then i try the same steps again to
fill out a new form and i have to do all the steps over again just
to get the form to save.
The same thing happens when i try to view the results....1st
time works great.....2nd time not so well, get page errors, then
have to delete all cache and cookies....then loads up finally.
Why is it so buggy? Would copy and pasting my code for both
pages even be helpful? Im using all the functions inside
Dreamweaver . I just dont know if its an easy fix or if its saving
previous pages and giving me the error. Just really wierd, since in
the book im reading doesnt cover this at all.
I apologize for the long post, but just wanted to give as
much info as possible.
Thanks in advance
- Gary

You'll have this problem again if you continue to use Access.
As your site
grows, Access can't keep up for long.
Consider using SQL Server 2005 Express (free from Microsoft)
instead.
"GGSquared" <[email protected]> wrote in
message
news:f5s3s9$6qj$[email protected]..
> sorry for the replies....got it working though.
>
> I changed my connection from a DNS connection to a
DNS-less connection (i
> think thats the right terminology) and it works
perfectly....will keep
> this in
> mind in the future. Thanks.
>
> -Gary
>

Error at the time of Shopping cart creation.

Hi experts,
Can any one tell me, I get an error message at the time of raising a SC,
The error is
Partner 22452 not found with with partner function type goods recipent.
Account 54102022 requires an assignment to an CO object
No address found for partner type goods recipient.
I have checked users consistency he is fine, I checked all the attributes they were fine.
So where could be problem? can any one suggest?
Best Regards,
Sairam

Hi
First check ->
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user - Is everything correct or does the user need to be repaired ?
3. OSS note 907169 : "To repair the user data, you must redistribute using HR/ALE replication.
You can then check the user data using Transactions 'SU01' and 'BP' and you can adjust them manually where necessary."
4. Please check if the user that you are using to shop has its BP created consistently. Please perform the trx BBP_BP_OM_INTEGARTE transaction for the User and BP and you should find the inconsistency in the BP. You can also check it directly in Trx PPOMA_BBP under the check tab for that Users CP.
Please click on the synchronize button inside the transaction. This should fix the error. If this doensot fix the error, please follow the suggestion below:
If you are not in a productive environment, please delete the position ID and the relevant assignments associated to it from transaction PPOMA_BBP. Also delete the business partner using trx BUPA_DEL. Once you have done this, please re integrate the User ID into the Org Structure.
5. Business partner error related link
Message: Enter a country for partner xyz with type 'requester'
/message/4395909#4395909 [original link is broken]
Other related links ->
Re: Partner not found - confirm goods / cervices centrally EBp4.0
Re: Partner function not found
Enter at least one partner of type Location Or Goods Recipient (Item 1 )
SRMSUS_SELFREG Partner not found
Enter no more than one partner of type Goods Recipient
OSS note 801133 resolves the problem from backend system
Partner function not found
Partner Ship-to address not found.
Business partner error
No adrress found for partner function type goods recepient
Do let me know.
Regards
- Atul

Error message no 81303 in excise invoice creation

Hi sapers,
I am facing the problem while creating the excise invoice in j1iln.System throughing the error 81303 customisation for document type f2 missing in table billing type reference.
Thanks in advance.
Regards,
Gayaz

Hi,
Please go through the below link... hope it would resolve your issue.
Billing type F2 not defined error vf 007
Regards

Access specific files in the time machine from another Mac

I bought one mac air with less space than the mac pro backup that I have in the Time Machine, so I can't migrate the old mac to the new mac air. How can I Access specific files in time machine then? Thank you.

You can still get your files out of the TM backup..
There are several methods..
you can do it manually.
See Can't access old files on time capsule
You can also buy a USB drive large enough for the whole backup and simply restore the whole thing to that drive plugged into your computer.. you can then pick and choose what files you want. And at any time you want. Having files in their standard format and location is hugely easier than TM backups.
If you run into permissions issues there is a fair bit of help although a bit outdated in pondini KB.
So read through the info here..
Q14-17 on restore in particular. http://pondini.org/TM/FAQ.html
And check the troubleshooting for specific problems that can arise.
http://pondini.org/TM/Troubleshooting.html
Section E in particular.
You can pull the hard disk out of your Mac Pro.. that is not hard.. put it in a USB to sata holder and access files that way..
Overall this is what I would do anyway.. because you will not want to junk the computer with files intact.. pull the files directly off the old hard disk.
Let me also commend to you a different strategy in the future..
TM is great when it works.. sadly on every upgrade Apple make changes to it.. and cause utter chaos.
Buy a 3rd party backup software.. I use CCC and like it.. you create bootable clones of your Mac.. that means all files are readily accessible because you can literally boot directly from the backup.. or access the files because they are not hidden, compressed, rewritten in strange formats.. etc.
Recovery of a computer with a dead hard disk is 3min exercise where you hold the options key during boot and choose the backup disk.
You can continue to use TM for the incremental backups which it does very well.. but have the bootable clone as a way of accessing everything. From which you can then easily access the TM backup for whatever might be missing.. I do not do Clones on regular basis.. so it is slightly different method of doing things..
You can never have enough backups.

Error while excise invoice creation thru J1IJ

Dear All,
Scenario: Stock transfer from Excise depo to other plant.
Problem :
Excise Invoice is not getting Generate in Transation J1IJ. i am getting following error
"Excise invoice selection not complete for the item 000010"
Also Please tell me the process , (STPO > Delivery > Invoice > Excise Invoice) is it correct ?
Thanks in advance
Vishal

Hi ,
The process as below
1.Create STO ---Me21n
2.Delivery with reference to STO ---Vl10B/VL10D
3.Invoice proforma with reference to delivery--Vf01
4.Excise invoicewith reference to Proforma---J1iJ
Kindly check the excise duty is coming in the proforma invoice
Regards
Damu

Error While Creating Repository Content at the time of Installation

Hi Guys,
When i'm trying to create repository content at the time of informatica installation i'm getting error "Cannot create repository content or restore".
I'hve attached the log file below
ONE')
INSERT INTO REP_CARD_TYPE VALUES (4, 'MANY TO MANY')
CREATE TABLE REP_TARG_TYPE
TARGET_TYPE integer,
TYPE_NAME varchar(20)
INSERT INTO REP_TARG_TYPE VALUES (0, 'NONE')
INSERT INTO REP_TARG_TYPE VALUES (1, 'DIMENSION')
INSERT INTO REP_TARG_TYPE VALUES (2, 'FACT')
CREATE VIEW REP_DATABASE_DEFS AS SELECT
DISTINCT
DBDNAM DATABASE_NAME,
SRCNAM DEF_SOURCE,
SUBJ_NAME SUBJECT_AREA,
NULL VERSION_ID,
OPB_DBD.VERSION_NUMBER DATABASE_VERSION_NUMBER
FROM OPB_DBD, OPB_SUBJECT, OPB_SRC
WHERE OPB_DBD.SUBJ_ID = OPB_SUBJECT.SUBJ_ID AND
OPB_SRC.DBDID = OPB_DBD.DBDID AND
OPB_SRC.VERSION_NUMBER = OPB_DBD.VERSION_NUMBER AND
OPB_SRC.IS_VISIBLE = 1
ORA-01031: insufficient privileges
Database driver error...
Function Name : executeDirect
SQL Stmt : CREATE VIEW REP_DATABASE_DEFS AS SELECT
DISTINCT
DBDNAM DATABASE_NAME,
SRCNAM DEF_SOURCE,
SUBJ_NAME SUBJECT_AREA,
NULL VERSION_ID,
OPB_DBD.VERSION_NUMBER DATABASE_VERSION_NUMBER
FROM OPB_DBD, OPB_SUBJECT, OPB_SRC
WHERE OPB_DBD.SUBJ_ID = OPB_SUBJECT.SUBJ_ID AND
OPB_SRC.DBDID = OPB_DBD.DBDID AND
OPB_SRC.VERSION_NUMBER = OPB_DBD.VERSION_NUMBER AND
OPB_SRC.IS_VISIBLE = 1
Oracle Fatal Error
Database driver error...
Function Name : ExecuteDirect
Oracle Fatal Error
Error occurred while creating the repository
An error has occurred while creating contents. Dropping repository tables...
Create Contents operation on repository [Oracle_BI_DW_Base] ended at 08/10/2009 11:50:49. Elapsed time is 0:00:10.
[[REP_57106] Repository operation error. See repository service log for detailed information.]
Failed to execute create.
Completed at Mon Aug 10 11:50:49 2009
Error:
ExitCode: 1
Installation Complete
======================

Hi Rama,
You don't need to give your etl_ram user a dba role.
Please refer to the Oracle® Business Intelligence Applications - Installation Guide for Informatica PowerCenter Users, especially to chapter +4.4.1 Create Databases for Oracle BI Applications and Informatica PowerCenter Components+
Quoting:
Make sure that the Oracle Business Analytics Warehouse instance is granted the SSE_ROLE. For more information, see Section 4.4.1.1, "How to Create the SSE Role."
This role would typically get more privileges than just CONNECT and RESOURCE.
Hope it helps,
Michal

Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

Dear All,
While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
"Error updating table J_1IEXCHDR"
Message no. 8I308
Suggest me asap,.
Thanks & Regards,
Radhika

Hi Radha,
Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV Update all the gl accounts in the table.
Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
Credit -- CENVAT Suspence
Cr         RG23 AT1
Cr         RG23 BED,RG 23 ECS,
Dr         CENVAT Clearing
Dr         PLA BED, PLA AED, PLA SED
Dr         RG23 AED, BED, SED
Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
Thanks,
padmaja

SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

Similar Messages

Maybe you are looking for