SAP MM config book with screenshots

Hello All,
Could any provide me an insight on where the following book can be purchased in Bangalore?
"SAP MM - Functionality and Technical Configuration" by Martin Murray.
Your inputs shall be of immense help for MM community.
Many Thanks,
Sreeni.

Hi
You need to buy this book online from SAP press. Best way is to visit the website or from amazon.com
You may use the following link
For sap Press
http://www.sap-press.com/product.cfm?product=H1912
For amazon
http://www.amazon.com/MM-Functionality-Technical-Configuration-Martin-Murray/dp/1592290728
The book is extremely useful as it clears lot of fundamental doubts. Ofcourse, if you are expecting that book as an "instant mix"  to become a SAP MM consultant, I am afraid it won't serve the purpose. For going through this book, you need to have functional knowledge and a good exposure to SAP MM.
Cheers
Jags

Similar Messages

  • Need SAP  CRM 4.0 installation guide with screenshots.

    Hi any body please send me the SAP  CRM 4.0 installation guide with screenshots.my mail id Thanks in advance.
    Message was edited by:
            Yaroslav Zorenko
    mail deleted

    Why do you need screenshots? Check the official documentation at
    http://service.sap.com/instguides and read the notes.
    What is unclear to you?
    Markus

  • How to config SAP to send mail with autentication

    I'm trying to send emails using SAP, and I've manage to do it, I configurated the smtp server in SCOT transaction, sap conects to it and send's emails.
    however some emails are blocked because I don't use any kind of authentication. How can I config that?

    Hi,
    How to config SAP to send mail with autentication
    friend you questionis already discussed in one of sdn thread.please search once the forum then apply Qn. on SDN.
    this time i can help you but please next time onwards serch first on SDN forums.
    Mail Server
    Thnks
    Mhn

  • Resource booking with Windows 8.1 and office 2010

    I've two SP3 Laptops running 8.1 on out network.     I've Office 2010 installed on these and they are mostly working fine;
    However they cannot book resources  - this is a common win7 fault we would fix here - http://support.microsoft.com/kb/982774/en-gb
    But its not working under Win 8.1, neither the fixit icon or the manual config.
    We are presently running exchange 2003
    Is there a 8.1 2010 fix you know of?
    Many thanks,
    Stuart
    I asked this yesterday of this forum -
    http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/resource-booking-with-windows-81-and-office-2010/1b52161c-eb71-4dd5-a19e-14a4fdfe0abb
    , but they said that this pro forum was more suited for more technical issues.
    Stuart

    Hi,
    Currently I don't have the exact same environment to test, please make sure you have modified the registry keys correctly and if possible, try this manually on multiple Windows 8.1 machines to see if this is an individual issue or widely affected. If this
    fix doesn't work on all Windows 8.1 machines, please provide feedback or to report this issue with this solution, please leave a comment on the "Fix it for me" blog or send an
    email message.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to create the default empty work book with company logo and address????

    Hi Guru's
    I am working in ECC5.0 (BW 3.5), i wann create the default empty work book with company logo and company address. so when i am executing any query's that should open in the default empty work book.
    greatly appreciated your help. will assign pt's for sure.
    thanks and regards
    Mohan

    Hi Mohan,
      Report designer is used in BI 7.It is a seperate application used for formatting
    the report.
    For BW3.5,go through this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
    This would help you
    Regards,
    Senoy

  • I am getting the Error as "Returned Content XMl is Empty" in SAP Jco Config

    Hi,
    I am facing the problem in SAP Jco Config in SAP_JCo_Interface Action,
    while searching the BAPI (I am Using search Pattern as BAPI*) I am getting the error like following
    "Returned Content XMl is Empty".
    this URL refer the same problem ... Re: Reg : JCOProxy error:null
    But I am able to connect the SAP R/3 system successfully .. because  from the Existing Transaction the BAPI is called successfully.
    Regards,
    Dhanabal T
    Edited by: Dhanabal Thangavel on Jan 15, 2009 8:30 AM
    Edited by: Dhanabal Thangavel on Jan 15, 2009 8:37 AM

    Hi,
    Are you deploying Office 365 with the latest Office Deployment Tool? Try to download the latest version of ODT from below link, then try again:
    http://www.microsoft.com/en-us/download/details.aspx?id=36778
    A similar issue was resolved here, you might want to have a look:
    http://social.technet.microsoft.com/Forums/en-US/eeb7b577-7868-487a-851d-a6d8c1c6bbda/office-c2r-installation-error-17002?forum=officeitpro
    BTW, Microsoft Office 365 Community > Forums > Deploy Office 365
    is a better source for this kind of problem and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • SAP GUI 7.20 Frontend screenshot functionality

    Hello,
    as mentioned in the SAP Note 1393114 - "New features in SAP GUI for Windows 7.20"
    there should be a new Feature called:
    "Frontend screenshot functionality: The SAP System can now transfer screenshots of the current SAP GUI state to the server."
    Anybody knows how this Feature should work? or how it is activated?
    Thanks for your help, br Philipp Schönegger

    Hello Philipp Schönegger,
    this new functionality can be used with ABAP method CL_GUI_FRONTEND_SERVICES->GET_SCREENSHOT.
    For more details please read note 1411440.
    Kind regards,
    Martin

  • Com.sap.xss.config.FPMEonfiguration.Exception: Read of object error

    Hi Experts,
    I have done the technical config of ESS on EP (mySAP ERP05) and using my id (portal admin) i can view the who's who section of ESS.
    But when i log in with the test ess user ESSUSER, then i get the error:
    com.sap.xss.config.FPMEonfiguration.Exception: Read of object error
    Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication)
    1. I have assigned READ permission with END USER tick for EVERYONE group in portal for ESS ROLE
    2. I have assigned EMPLOYEES to the USER and assigned the required composite role and the authorization for S_SERVICE and S_RFC
    The PORTALADMIN user and the ESSUSER user in the portal have exact authorizations in the backend. Still the error persists in ESSUSER.
    Can someone advise.
    Regards,
    Shobhit

    Hi Shobhit,
    Give EVERYONE READ access with END USER on the following folder in PCD.
    Portal Content -> Content Provided by SAP -> srvconfig
    Hope this helps
    Akhilesh

  • I need ECC 6.0 installation steps with screenshots

    please send me the ECC 6.0 installation guide.I need ECC 6.0 installation steps with screenshots. my mail id is <removed by moderator>.thanks in advance.

    need SAP  CRM 4.0 installation guide with screenshots.
    Markus

  • Give me the best EBOOK PDF for starting SAP Bi iam familiar with netviewer

    give me the best EBOOK PDF for starting SAP Bi iam familiar with netviewer
    but i dont have any knowledege of datwarehosuing concepts

    hi,
    Check this link:
    http://books.google.co.in/books?vid=ISBN0201703661&id=3wBjrMDWescC&pg=PA4&lpg=PA1&ots=RHrS-mgEfu&dq=stepbystepguidebw&sig=DLreI0ZKkbJnBXj5Ky_y1sHCIB4#PPA94,M1
    A very clear "starting" presentation is:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9a0e9990-0201-0010-629b-dc2735cb9c81
    check this link, it has got a lot of help.
    http://www.sap-img.com/sap-bw.htm
    All help ebooks are in PDF format here
    http://www.easymarketplace.de/online-pdfs.php
    hope it helps..

  • MM book with screen shots

    Dear All
    Could you please refer me a good MM book with screen shots, one of my friend has a SD book which he says its very useful, but i havent found a good book in the market for MM.
    regards
    Chetan

    Hi,
    This is Lokesh . Can i get the MM config Books or Notes online somewhere.
    if you can pass it on that will be a great help.
    Regars
    Lokesh

  • Managing Tariff:SAP documentation/cook book

    Hi Experts,
    I'm new to ISU. Share "Managing Tariff" process SAP documentation/cook book
    Thanks in advance.
    Moderator note - thread locked - no research done, imprecise question

    Guess I answered the question myself by checking in the system:
    For own containers, a resource of type Transportation Unit has to be created for each container (though the TM book says that those have no functionality anymore - apparently this is wrong/has been changed). There you can specify an equipment which provides physical properties to the resource.
    In planning, you have to create Container Units (which, according to documentation, is a kind of Transportation unit, which is quite confusing because this is something different then the Transportation Unit ressource type mentioned above). For own containers, you assign a TU resource. For containers provided by the LSP, you just assign an equipment. Result is in both cases a container unit which can be "filled" with freight units, one having a link to a resource, the other not. Guess you can proceed equally from there on.
    The connection between Event tracking of Container (as well as Trailer and Railcar) Units and assigned resources (of type Transportation Unit in the container case, of type Passive Vehicle in the other two cases) is explained in the EM guide on Ressource Tracking, which can be found here: Resource Tracking Scenario for SAP Transportation Management
    Still, please correct me if I'm wrong somewhere, and feel free to make additions!

  • How do i use my mac book with my HP 6510 e all in one series printer

    how do i use my mac book with HP photosmart 6510 e all in one series

    Hello Marilynatsea,
    Thanks for using Apple Support Communities.
    To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
    Mac Basics: Printing in OS X - Apple Support
    Cheers,
    Alex H.

  • Is there a way to create a flipping book with the flipping 5k adobe software?

    Am I the only one pissed with the f adobe products?
    Is there a way to create a flipping book with the flipping 5k adobe software? Is it Flash, etc?
    Thanks

    Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

  • Middleware problem -Outbound queue is stuck in SAP R/3 system with message

    Hi Middleware gurus ,
    We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
    Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
    Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message “STOP” .
    There are two queues generated in SAP R/3 system with names “MASS_CRM_CUSTOME” and “R3AD_CUSTOME” . The status for both the queues is “STOP” and when go for details it mentions “sapsuck ..SAPMSSY1 “ -Message no. SR 053.
    Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
    We really don’t as to why the Initial load worked fine with 2 BPs  and later when want to do more BP Initial Load the Outbound queue is getting stuck
    Also , by unlocking the 2nd queue “R3AD_CUSTOME” we are able to release it , but the first queue “MASS_CRM_CUSTOME*” is stuck
    Please help us urgently
    Regards
    Dinesh and Ritvij
    Email : [email protected]
    Mobile -+91=9704933315

    Hi Praveen and other Middleware gurus,
    We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
    We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
    An RFC link is not maintained in the Middleware
    Message no. CRM_BUPA_MAPPING051
    We have set the RFC link , but still the problem continues!!!
    Please help further..
    Regards
    Dinesh and Ritvij

Maybe you are looking for