SAP MM Rounding Profile not allowed for plant in sales org data 1-Quantity stipulation
Hi
I have created rounding profile in OWD1 for a particular plant and it is showing IN material master MRP DATA1 area. But when i am trying to assign in sales :sales org1 data under quantity stipulation area there is no profile . Is there any specific plant assignment for sales area data?
Kindly guide me.
Ganesh
Hi,
The material master sales data 1 is not plant specific generally. You may create a rounding profile in OWD1 without plant and then the same will be visible in the F4 list in sales data 1. If the rounding profile is plant specific, you have to maintain the delivering plant in material master - sales data 1.
Regards,
AKPT
Similar Messages
-
Status profile not allowed for object type
hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
RameshRamesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type. -
Error in RZ20 - 06355 Purchasing organization QRP1 not allowed for plant 1
Hi all,
We have setup a new purchasing organisation in SRM 4.00.
I have got all my vendors in now and plants, how do i assign the plant to the correct Purchas org?
I can create a cart but i get the message 06355 Purchasing organization XXXX not allowed for plant YYYY
any ideas guys?
Regards
SteveHi, Steve
This is a backend error, check the following in backend.
(tr:SPRO)
Enterprise Structure
Assignment
Materials Management
Assign purchasing organization to plant
Regards
Lauren -
QM action not allowed for DTP requests in master data and Text tables
Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank youFolks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks -
No local currency found for plant and sales org.
Hi Guru's,
I am face to a problem that i don't understand.
I load the standard master data 0PLANT and i have the basic issues : No local currency found for plant and sales org.
I already saw this error so i check the basics to solve it.
I respect the comp_code, sales_org and than plant sequence.
i checkek the routines, no problem.
for some plants it works. i extract 8 plants 2 works the rest not. the reason is that there is no sales org affected in my PSA table for those plants.
But (and this is the problem) when i check the SAP source table T001W i can see that plants are corectly affecte to sales organization
So do you have any idea of my problem ?
do you know the transaction on ECC to maintain division and sales org affectation
Thannks
CyrilHi,
Pls have a look at this similar post:
[No Local Currency found in Plant |How can I view the code for a routine in an update rule;
Hope it helps...
Regards,
Ashish -
ESS Business Package Error: Period type not allowed for profile ESS
Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
JojoHi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi. -
The value is not allowed for the field Cross-plant CM
Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar -
Combination of GR/IR Control not allowed for External Services-SRM PO error
Hi All,
SRM 5.0 ECS R/3 4.6C
We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
The PO is in error in process at this moment. And is not in R/3
On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
Confirmation-Related Invoice Verification is not checked. Any thoughts on this!!
Thanks
KrishnaHi
<u>Please go through the following SAP OSS Notes -></u>
Note 725824 - MB5S: Error with purchase orders for external service
Note 781014 - Clearing values in purchase order currency are too high
Note 991800 - MB5S: Error in delivery costs (2)
Note 960789 - Wrong Values in MM Document for Service Based Invoice
Note 778562 - MM-IV: invoices are entered before the goods receipt
Note 578531 - Incorrect FM update for service purchase orders
Note 635864 - ME2S: Invoice value is calculated incorrectly
Note 570409 - Unplanned account assignment in invoice for service PO
Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
Do let me know.
Regards
- Atul -
Capital inv. program position not allowed for measure
Hi Gurus,
When I am going to assign top level wbs to investment program position i am getting the error message
How I can overcome this.
Quick response will be rewarded and appreciated.
Cap. investment program position not allowed for measure
Message no. AP039
Diagnosis
You want to assign a measure or appropriation request to an investment program position. However, the program position does not allow this type of assignment.
System Response
The assignment is not allowed.
Procedure
Use the detail display in the position to find out what assignments are allowed to it.
rgdsHI Sree
In im12 I have one general Tab and one Organisational tab.Here I am not getting allowed measures button.
even though I am unable to create AR when i am assigning WBSE there then I am getting the error message.
Program type not allowed according to budget profile of measure
Message no. AP177
Diagnosis
You tried to assign a measure to an appropriation request.
The appropriation request type for the appropriation request specifies that assignment from measures is only possible, if the measures specify that they have to be assigned later to an investment program with program type ZM01.
However, the budget profile of the measure specifies that it has to be assigned later to an investment program with program type ZC01.
System Response
The function cannot be carried out.
Regards -
BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service
Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help. -
The operation is not allowed for result set type FORWARD_ONLY
Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel 7.5.0 Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0 Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
VinodHi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco -
Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'
Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
VangelisHi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem -
Exception: Call of execute(String) is not allowed for PreparedStatement
Hi all,
This query was run fine on SapDB 7.4 from Jave code using prepareStatement() method:
declare id11216053819634 cursor for select sc.name, measuredobjectid id from serviceconditions sc, measuredobjects mo where sc.collectionid = mo.collectionid and sc.name like 'DWindowsSLA/%,%,%,%' for reuse
declare id21216053819634 cursor for select min(sampletime), max(sampletime), name, id11216053819634.id from id11216053819634, d_slastore ss where id11216053819634.id = ss.measuredobjectid and ss.sampletime between '2008-07-14 00:00:00' and '2008-07-14 12:43:35' group by name, id11216053819634.id for reuse
select ss.status, ss.statuschange, ss.sampletime, id21216053819634.name from d_slastore ss, id21216053819634 where ss.measuredobjectid = id21216053819634.id and ss.sampletime between '2008-07-14 00:00:00' and '2008-07-14 12:43:35' and (statuschange != 0 or ss.sampletime = id21216053819634.expression1 or ss.sampletime = id21216053819634.expression2) order by name, sampletime
We recently upgrade our old SapDb to the latest MaxDB. An now this query produces the error:
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Call of execute(String) is not allowed for PreparedStatement.
Does anyone know how to fix this?
Thank you very much,
IrinaHi Irina,
First, welcome to SDN!
Well, PreparedStatement represents a precompiled SQL statement, so you should be using the no-arg execute() method rather than execute(String).
HTH!
\-- Vladimir -
The sales unit is not allowed+STO plant to plant
Dear Friends,
In plant to plant stock transfer,while creating delivery in VL04,system is giving the following message-
'The sales unit is not allowed for the material in item 000010'
I have not assigned any sales unit to the material still it is giving this error.
Please adviceHave a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi -
Activity type E not allowed for equipment entered
Dear Sir , We are using ETM . Following error is coming while creating performace based document .
Activity type E not allowed for equipment entered
Regards
AnilGive 1 for both type and give it a try.
for target=actual which is type 5 pls check the link below
http://help.sap.com/saphelp_46c/helpdata/EN/66/bc6faa43c211d182b30000e829fbfe/content.htm
Maybe you are looking for
-
IMovie 10.0.8 crashing 3 seconds after opening
Every time I open iMovie, it crashes "unexpectedly" immediately after I get a notification saying Share Failed. FF transcoder unshare operation failed iMovie theater. It was perfectly fine before today, but just began crashing out of nowhere even bef
-
I logged on to hotmail using firefox and was using it normally. After sometime, suddenly i was unable to click any links. Clicking acted as a right click and showed the context menu. Even my dashboard-mouse-centerbutton-click was disabled. Also, the
-
User Group Membership change Alert
As a system administrator, I will like to be alerted when a user's group membership has changed on the domain. Can Spiceworks compare the imported memberships in its database with AD and alert me when they do not match? Below is an image of the infor
-
Best Email Platform for Blackberry Z10
I love my Z10 phone. However, going from getting pushed instant e-mail from personal and business e-mail for 5 years to what I am getting on my Z-10 is crazy! I am an E-mailer! I use Yahoo and groupwise and both are a disaster on my Z10. I may have
-
How to make an irrelative person able to see the process flow?
A manager asks his/her secretary to help him/her fill a form,which results that the manager isn't involved in the process.But the manager wants to trace the progress of the process.How should I do?