SAP MM- Trying to send RFQ's to the vendors via email.

Hi Experts,
User is trying to send RFQs using Email address... But user is not able to do so....
Please guide how to start with...
Thanks,
Forum shah

Hi,
First of all U need to maintain an e-mail address in the vendor master data, then
define communication strategy (if not existing): SPRO > SAP Netweaver > Application Server > base setting > message control > communication strategy --> define one and assign communication method INT
Once done, define output message on RFQ with (particular values only specified):
Transmission method: 5
Partner function: VN
Communication strategy: as defined above
At the end go in SCOT transaction and make sure tahta node INT is active with proper info. Double click on SMTP and insert:
maximum time (30 minutes?)
node in use marked
MAIL host: ask syst admin
MAIL port: ask syst admin
Set internet: * --> to send e-mails to all domains (here U can filter)
From SCOT u should also create a job for sending e-mail periodically; normally the output message creates record in SOST transaction (cockpit about e-mails management) that can be processed manually or autho by job periodically,
SCOT setting can be found in SAP note 841883 and related.
I hope it helps,
Cheers,
Mik

Similar Messages

Attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outb

attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

While trying to send a message to the receipient outside the domain...

While trying to send a message to the receipient outside the domain,the server
sends back the delivery error email message to the sender. this is OK. But for
some reason the the mail server keeps searching for the wrong recepient and
sending back the deleivery error email to the sender periodically. In this way,
it has sent around 450 such messages to my mailbox.
the mail delivery error looks like this :
451.. Name Server timeout while searching a.com in DN
Reporting -MTA;: dns; s-ghq-csc-ocsapp1.tawasul.mil.ae
Received -From-MTA:DNS;w-anh-sic-004.ANH.mil.ae
Final Recepient:RFC822; [email protected]
ACtion: Failed
Remote-MTA:DNS; a.com
Diagnostic-Code:SMTP;451... Name server timeout while searching a.com in DNS
Last-Attempt-Date:Tue, 18Feb 2003 08:34:38 =0000
solution ???

Hi,
This is apparently the week for integration questions!
There's no such product as "WebLogic MQ". I assume that what your trying to do is communicate with MQSeries or some other non-WebLogic vendor.
You cannot use a WebLogic client to communicate with MQ or vice-versa. You must create an MQ client using a MQ JMS connection factory in order to communicate with an MQ destination. Similarly, you must create a WL client using a WL connection factory in order to communicate with a WL destination. This advice applies to any JMS vendor, and is quite similar to the way JDBC drivers work.
Note that if you're communicating with MQ from a client rather than an application that's running on a WebLogic server, then there's often little purpose in using the "Foreign JMS" mapping facilities (in addition, these facilities may not work on the client for all foreign vendors -- I assume it depends on whether the foreign vendor connection factories and destinations are fully serializable/transferable between JVMs). Instead, you might want to consider using the standard JNDI and JMS APIs to communicate with MQ directly (eg, there's no need to involve WebLogic code in this case).
For information on integration, see the WebLogic doc for [ Integrating Remote JMS Providers | http://download.oracle.com/docs/cd/E12839_01/web.1111/e13727/interop.htm#JMSPG553 ] and, if the "MQ" your refering to in this case happens to be MQSeries, also see the blog post [Integrating WebSphere MQ 6 with BEA Weblogic Server 10|http://ibswings.blogspot.com/2008/02/integrating-mq-broker-6-with-bea.html].
Note that the majority of MQSeries integration customer apps that I've run across require "exactly-once" behavior, which means they must run on a WebLogic server (not a client) in order to participate in a WebLogic JTA transaction.
Hope this helps,
Tom

I tried to send a calendar to the US by changing my Canadian shipping address to that in the U.S. It didn't work

I tried to send a calendar to the US by chandhing my Canadian shipping address to the American address that I wanted to send it to. It would not accept the change. Why?

I believe it's decided by the billing address of your credit card.

How to generate payment advice in F110 and send it to Vendors Via Email

Dear SAP Experts
Could anybody tell me how to generate payment advice in F110 and send it to Vendors Via Email?
It would be much appreciated if someone can provide the configuration procedure, thanks so much in advance.
Cheers & Best Regards
Ray

Hi Sama,
Thanks for your post, here I just share some of my idea.
The following step is to configure the payment advice.
In OBVU (payment methods in cpy code) I entered my payment advice form
In OBVU (payment methods in cpy code) set "Always pyt advice"
In OBVCU (payment method by country) leave the payment medium program (RFFOD__T)
For the email sending program, should develp some customized program to realize that, Thanks.
Cheers & Best Regards
Ray

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for thos

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?

Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well...

Send a mail to the vendor at the time of approval with the attachment of PO

Hi all,
I want to send a mail to the vendor at the time of approval by attaching the pdf of that particular PO.
How can I achieve this?
I know the User Exit where the code should be written.
But I want the solution for attaching the PDF of PO at the time of approval.
Please help me in this regard.
Edited by: vinil kumar aturi on Mar 16, 2009 7:52 AM

Hi,
Try Following Code to Send mail as PDF Attachment
In this
Smart form Name : ZSMART_MM_003
This will send mail to EMAIL ADDRESS SPECIFIED IN VENDOR MASTER FK03
This code is written for ME23n so we used nast-objky(10) for purchase order no you may replace it with your purchase order no
and smart form name with your smart form name
*-- Send Mail---
*-- Function Module Call to get Customer Address (Email)--
DATA: VENDOR TYPE ELIFN,
      ADDRNO TYPE ADRNR.
DATA: atab-mail TYPE STRING.
SELECT SINGLE LIFNR FROM EKKO INTO VENDOR WHERE EBELN = nast-objky(10).
SELECT SINGLE ADRNR FROM LFA1 INTO ADDRNO WHERE LIFNR = VENDOR.
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = ADDRNO
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
if sy-subrc = 0.
DATA: FILENAME TYPE STRING.
CONCATENATE 'PurchaseOrder' nast-objky INTO FILENAME SEPARATED BY '-'.
DATA: MESSAGELINE1 TYPE STRING,
        MESSAGELINE2 TYPE STRING.
CONCATENATE 'Do you want to send ' FILENAME ' through E-mail to' into MESSAGELINE1.
CONCATENATE atab-mail '?' into MESSAGELINE2.
data: answer    TYPE c.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
       EXPORTING
            defaultoption = 'N'
            textline1     = MESSAGELINE1
            textline2     = MESSAGELINE2
            titel         = ' '
            start_column = 35
            start_row     = 10
       IMPORTING
            answer        = answer.
IF answer EQ 'J' OR answer EQ 'Y'.
Code to find Contact person
    DATA: CONTACT TYPE EVERK.
    SELECT SINGLE VERKF FROM EKKO INTO CONTACT WHERE EBELN = nast-objky(10).
Internal Table declarations
    DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
          I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
          I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
          I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
          I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
          WA_OBJHEAD TYPE SOLI_TAB,
          W_CTRLOP TYPE SSFCTRLOP,
          W_COMPOP TYPE SSFCOMPOP,
          W_RETURN TYPE SSFCRESCL,
          WA_DOC_CHNG TYPE SODOCCHGI1,
          W_DATA TYPE SODOCCHGI1,
          WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
          V_FORM_NAME TYPE RS38L_FNAM,
          V_LEN_IN LIKE SOOD-OBJLEN,
          V_LEN_OUT LIKE SOOD-OBJLEN,
          V_LEN_OUTN TYPE I,
          V_LINES_TXT TYPE I,
          V_LINES_BIN TYPE I.
          DATA : s_control_parameters TYPE ssfctrlop,
                  s_output_options     TYPE ssfcompop.
                  s_control_parameters-getotf = 'X'.
                  s_control_parameters-no_dialog = 'X'.
                  s_control_parameters-preview   = 'X'.
                  s_output_options-tdnoprint = 'X'.
                  s_output_options-tdimmed   = ''.
                  s_output_options-tddest = 'LP01'.        "Spool: Output device
                  s_output_options-tdreceiver = sy-uname.
                  s_output_options-tdcover = ''.
         CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
         EXPORTING
            FORMNAME = 'ZSMART_MM_003'
         IMPORTING
           FM_NAME = V_FORM_NAME
         EXCEPTIONS
           NO_FORM = 1
           NO_FUNCTION_MODULE = 2
           OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
         W_CTRLOP-GETOTF = 'X'.
         W_CTRLOP-NO_DIALOG = 'X'.
         W_COMPOP-TDNOPREV = 'X'.
         CALL FUNCTION V_FORM_NAME
         EXPORTING
            CONTROL_PARAMETERS = s_control_parameters
            OUTPUT_OPTIONS = s_output_options
            USER_SETTINGS = ''
            nast          = nast
            WA_ADDRESS    = WA_ADDRESS
         IMPORTING
            JOB_OUTPUT_INFO = W_RETURN
         TABLES
            addtel = it_addtel
            addsmtp = it_addsmtp
         EXCEPTIONS
            FORMATTING_ERROR = 1
            INTERNAL_ERROR = 2
            SEND_ERROR = 3
            USER_CANCELED = 4
            OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Convert SMartform to pdf
      I_OTF[] = W_RETURN-OTFDATA[].
      CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT = 'PDF'
        MAX_LINEWIDTH = 132
      IMPORTING
        BIN_FILESIZE = V_LEN_IN
      TABLES
        OTF = I_OTF
        LINES = I_TLINE
      EXCEPTIONS
       ERR_MAX_LINEWIDTH = 1
       ERR_FORMAT = 2
       ERR_CONV_NOT_POSSIBLE = 3
       OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
      LOOP AT I_TLINE.
        TRANSLATE I_TLINE USING '~'.
        CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
        ENDLOOP.
        TRANSLATE WA_BUFFER USING '~'.
        DO.
          I_RECORD = WA_BUFFER.
          APPEND I_RECORD.
          SHIFT WA_BUFFER LEFT BY 255 PLACES.
          IF WA_BUFFER IS INITIAL.
            EXIT.
            ENDIF.
            ENDDO.
Attachment
            REFRESH: I_RECLIST,
            I_OBJTXT,
            I_OBJBIN,
            I_OBJPACK.
            CLEAR WA_OBJHEAD.
            I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
            I_OBJTXT = 'Sir, '.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Please Find Attached '.
            APPEND I_OBJTXT.
            I_OBJTXT = FILENAME.
            APPEND I_OBJTXT.
            I_OBJTXT = 'For your reference'.
            APPEND I_OBJTXT.
            I_OBJTXT = ''.
            APPEND I_OBJTXT.
            I_OBJTXT = 'Regards'.
            APPEND I_OBJTXT.
            I_OBJTXT = CONTACT.
            APPEND I_OBJTXT.
*Mail Subject
            DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
            READ TABLE I_OBJTXT INDEX V_LINES_TXT.
            WA_DOC_CHNG-OBJ_NAME = 'Purchase Order'.
            WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
            WA_DOC_CHNG-OBJ_DESCR = 'Purchase Order'.
            WA_DOC_CHNG-SENSITIVTY = 'F'.
            WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
            CLEAR I_OBJPACK-TRANSF_BIN.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            I_OBJPACK-BODY_NUM = V_LINES_TXT.
            I_OBJPACK-DOC_TYPE = 'RAW'.
            APPEND I_OBJPACK.
Attachment (pdf-Attachment)
            I_OBJPACK-TRANSF_BIN = 'X'.
            I_OBJPACK-HEAD_START = 1.
            I_OBJPACK-HEAD_NUM = 0.
            I_OBJPACK-BODY_START = 1.
            DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
            READ TABLE I_OBJBIN INDEX V_LINES_BIN.
            I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
            I_OBJPACK-BODY_NUM = V_LINES_BIN.
            I_OBJPACK-DOC_TYPE = 'PDF'.
            I_OBJPACK-OBJ_NAME = 'smart'.
            I_OBJPACK-OBJ_DESCR = FILENAME.
            APPEND I_OBJPACK.
            CLEAR I_RECLIST.
            I_RECLIST-RECEIVER = atab-mail.
            I_RECLIST-REC_TYPE = 'U'.
            APPEND I_RECLIST.
            CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
            EXPORTING
              DOCUMENT_DATA = WA_DOC_CHNG
              PUT_IN_OUTBOX = 'X'
              COMMIT_WORK = 'X'
            TABLES
                PACKING_LIST = I_OBJPACK
                OBJECT_HEADER = WA_OBJHEAD
                CONTENTS_BIN = I_OBJBIN
                CONTENTS_TXT = I_OBJTXT
                RECEIVERS = I_RECLIST
            EXCEPTIONS
                TOO_MANY_RECEIVERS = 1
                DOCUMENT_NOT_SENT = 2
                DOCUMENT_TYPE_NOT_EXIST = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR = 5
                X_ERROR = 6
                ENQUEUE_ERROR = 7
                OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
Regards
Nausal

I am trying to connect my PSP to the interent via my Wire...

I am trying to connect my PSP to the interent via my Wireless router with no success. Does anyone have any ideas what I can do? The Router is WPA enabled and I've entered the correct key on the PSP but still no joy! help!

hi...let me know the model and the version no. of the router that you are using...also tell me the ISP details, so that i can tell you step by step configuration...

Make my week schedule and then send it to all my team via email in detail

I just switched to iCal (Calendar as I have ML) and the important feature for me using Outlook before was to Make my week schedule and then send it to all my team via email. They could see my whole week outlined in detail, I could choose data ranges, wether I wanted to send details or titles and then receiving parties could add the meetings they wanted in their calendar as well.
Am I missing something or ical completely missed the boat on that one? is Apple going Backwards?

Hi,
This issue is usually caused by some anti-virus programs, disable the anti-virus program you have on the PC, check if this issue will happen again.
You may also run Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem viewing html emails in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue. Some security programs may have such add-ins intergrated with Outlook.
Regards,
Melon Chen
TechNet Community Support

I have tried, several times to share a numbers file via email but no email dialogue box shows when I select share

I have tried, several times to share a numbers file via email but no email dialogue box shows when I select share

Are we talking about the new Numbers, V3, or the old Numbers?
Jerry

I updated Firefox and now, when I select File, Send Link, a dialog box pops up asking me to establish a new account before I can send the link via email.

I updated Firefox and now, when I select File, Send Link, a dialog box pops up asking me to establish a new account before I can send the link via email. I use Outlook, so how do I avoid setting up some new account and yet am able to send the link via Outlook?
I have a feeling it may have something to do with HotMail.com.

My Error: I found out that it was Mozilla Thunderbird that was causing the problem. I uninstalled it and the problem went away.

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

How do I send soft copy attachments of photos via email to windows user

Help , need to send soft copy attachments of photos via email to windows operator . thanks

Not sure what you mean by soft copy attachments. But to help ensure Windows users have no problem coping with attachments from Mail Control+Click on the attachment that displays as an inline image and select 'View as Icon'. Also, in Mail>Edit>Attachments make sure 'Always send Windows-friendly attachments' is ticked.

Is there a way to send output from a Concurrent Request via email in r12?

We are looking for a way to send emails out from the Concurrent Request output in r12.
Discussions internally have involved using Unix procedures/commands but we were looking for an EBS integrated solution if one is available.
I did find document 811716.1which seems to provide a solution, but the patches and information given are for 11i (we are r12). If this functionality is available in r12, is there any further documentation we can use?
Any assistance would be appreciated.
Thanks.
Kevin
Edited by: user3065048 on Jul 21, 2009 2:52 PM

Duplicate post.
Is there a way to send output from a Concurrent Request via email in r12?
Re: Is there a way to send output from a Concurrent Request via email in r12?

SAP MM- Trying to send RFQ's to the vendors via email.

Similar Messages

Maybe you are looking for