SAP MMC error - MMC Could not create the snap in
I installed 3 new instances on a new server, and i get the following errors.
MMC Could not create the snap-in
MMC could not create the snap-in, the snap-in might not have been installed correctly.
Name SAP System Manager
CLSID: {633547ee-A302-11D1-Ae59-080009b07dbb}
Any Ideals.
Hi,
I got the exactly the same error. I installed GUI 7.10, and I installed the latest MMC but during installation of MMC was prompted that current version is allready newer.
Do you got some more specific answer on how did you solve this issue?
Thanks!
Best regards,
Jacco Raymakers.
Similar Messages
-
"MMC could not create the snap in.The Snap in might not have been instaled
Hi ,
After completed installation of NWDS SP 14 version and after system
restart,our local server is not working its showing an error.
"MMC could not create the snap in.The Snap in might not have been
installed correctly."
SAP Logon is also now working in my system. NWDS is not properly installed i
think.
Actually on that day gui also i have installed on our local server.
but when i login through <sidadm> server showing tree & also i am able to start server.
but i am not able to uninstall & install any gui or nwds...
what to do.....Hi,
MMC is not specific to GUI or MWDS. It is a management tool to start/stop server. It has nothing to do with GUI or NWDS.
1) Login with admin account (windows admin account, say sidadm) and check if MMC loads the tree with nodes for server instances. If so, use that and start server.
2) If required, check with authorizations for the windows account
3) If nothing works, then check these threads.
sap mmc problem
Re: MMC not working. Portal down
Regards,
Harini S -
MMC could not create the snap-in
Hello All
I hope this is the right section for this post.
I'm running SAP BW 3.1. Recently the server had a package of hotfixes installed (mainly security ones) and since then I cannot run the service in MMC. The "SAP R/3 Systems" section is there but nothing is underneath. The right panel indicates "MMC could not create the snap-in. The snap-in might not have been installed correctly".
Adding the snap-in manually returns the same message.
No "disp+work" process runs.
What should I check?
Thanks in advance for helpHi There,
Please refer to following SAP notes.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=142100]
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=544533]
Hope this helps.
Manoj -
MMC could not create the snap-in Event Viewer
when I try to invoke the event viewer in Vista I get the following error:
MMC could not create the snap-in.
Name: Event Viewer
CLSID: FX:{b05566ad-fe9c-7a4cbb7cb510}
I am having this problem. All of the information I find is one or two years old. I have seen several queries about it but never a complete solution posted.
I was wondering if anyone knew how to fix this problem
ThanksLooks like I found easier way for my Windows 7 Home Premium.
http://social.technet.microsoft.com/Forums/windows/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?prof=required
"I
have removed the [HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MMC \ SnapIns \ FX:{b05566ad-fe9c-4363-BE05-7a4cbb7cb510}
key (after
exporting it).
" thanks to Tom
No need to replace .NET, No need to delete machine.config. -
MMC could not create the snap-in {18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I appreciate your help.
Kind regardsThis error acoured after i try to install the Net framework 3.5, then I got
See below the previous error
=================================================================================================================
Dear All,
I have a HP Proliant with Xeon processor with Windows Server 2008 x64 running it.
I have a problem while i try to install updates, error code 800B0100
I tried with last know good configuration and it didn`t work.
The update which stop the updates is the Microsoft .NET Framework 3.5 SP1.
I tried the Checking System Update Readiness
and I got the following message
Checking System Update Readiness.
Version 6.0.6001.22275
2009-03-11 18:46
Checking Deployment Packages
Checking Package Manifests and catalogs.
Checking package watchlist.
Checking component watchlist.
Checking packages.
(f) CBS MUM Missing 0x00000002 servicing\packages\Package_for_KB948609_server_0~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
(f) CBS MUM Missing 0x00000002 servicing\packages\Package_for_KB948609_server~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
(f) CBS MUM Missing 0x00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Checking component store
Checking SMI Store
Summary:
Milliseconds: 138510
Found 3 errors
CBS MUM Missing Total Count: 3
My problem is that i can not see the Roles and Features.
According to my opinion this problem I caused by my self.
I was trying to install some roles to prepare the server
for the Exchange 2007. One of them asked me to restart the
server (I dont remember which one).
I did not restart it I left for latter on because my colleagues where
still working in some files (file server).
When I opened it after a while I saw the message saying that the
update Microsoft .NET Framework 3.5 SP1 can not be installed.
I tried many thinks and nothing is working.
I appreciate your help
Thank you in advance
Vincent Hu MSFT , Moderator Monday, March 16, 2009 6:13 AM
0 votes Vote As Helpful
Hi,
Please perform the following suggestions to see whether the issue continues:
Solution 1: Copy the corresponding files from another computer
1. Please download that Hot fix KB948609 which was showing as missing in CheckSUR logs.
2. Please rename the hot fix from extension *.MSU to *.cab so that you can extract the contents of that hot fix. Once you extract that hot fix we see another KB*.cab file inside “Windows6.0-KB948609-x64.cab", please extract the contents of this file as well.
3. You needed three files for a particular hot fix based on the Checksur.log. (i.e. Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum)
4. Please rename update.mum and update.cat files from “Windows6.0- KB948609-x64.cab” to the desired file name as shown below.
4.1 Please rename Update.mum to Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum.
4.2 Please rename Update.cat to Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.cat.
5. Please copy these two files to the following location %windir%/servicing/packages and then run CheckSUR tool again and it resolved the issue.
Note: Please process another two files follow the previous steps.
Solution 2: Download and extract these files manually
1. Copy these 3 packages for KB948609 from other windows 2008 server from c:\windows\servicing\packages directory.
Package_for_ KB948609_server_0~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Package_for_ KB948609_server~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
Package_for_ KB948609~31bf3856ad364e35~amd64~~6.0.6001.3053.mum
2. Now only Trusted Installer has Full Permissions on c:\windows\servicing\packages directory.
3. So you have to take ownership of this folder by going to Security -> Advance Tab -> Owner and Take Full Permission.
4. After you have Full Permissions you should be able to copy all the 3 files to this folder.
Marked As Answer Vincent Hu MSFT , Moderator Monday, March 23, 2009 1:32 AM
================================================================================================================
While trying to implement the solution: Solution 1: Copy the corresponding files from another computer
i have got this error now.
Now i can not even open the server manager.
King regards -
MMC could not create the snap-in Server 2008 Enterprise
I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I have not been able to find a server that has the same files as listed in other references but none of those other servers have the
same issue:
"On
another Windows Server 2008 x64 or Windows Vista x64 computer, in
thec:\windows\servicing\packages folder, 6 KB948609
related files may exist. Please copy all of them from that computer to c:\windows\servicing\packages on
the problematic computer."
So any assistance would be great.
"If at first you don't succeed, get a bigger hammer."I take that back... I can cut and paste:
Here is the error from the MMC:
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, Evidence securityInfo, StackCrawlMark&
stackMark)
at System.Activator.CreateInstance(String assemblyName, String typeName)
at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName)
at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn(String assemblyName, String typeName)
at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn(String assemblyName, String typeName)
at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
at Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
at Microsoft.ManagementConsole.Executive.StandAloneComponentData..ctor(SnapInRegistrationInfo info, Int32 bookkeepingId)
at Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"If at first you don't succeed, get a bigger hammer." -
LocalSecurityPolicy Showing MMC Could not create the snap-in
Hi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
SmileeHi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
Smilee -
Error: Outlook could not create the work file. Office 2013
I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support -
SAPMMC - MMC could not create the snap-in
Hi,
I have NetWeaver Developer Studio 2004s installed with Windows Server 2003.
The server was working correctly. But I tried to install SAPGUI from the SapNetWeaverABAP7TrialVersion package. The installation finished with errors.
I could´t even open sap logon. So I uninstalled SAPGUI. But it disconfigured my server and SAPMMC wasn´t working.
When I open SAPMMC, it return the message "mmc could no create the snap-in", and no Item appears in the left pane.
Is there any way to restore SAPMMC configurations? Or I Need to reinstal Sap NetWeaver Java 2004s?Hi,
Try to run the exe C:\usr\sap\A31\SYS\exe\run\sapstartsrv.exe and register.
else
From the MMC->File -> Add remove Snap in
Regards
Ayyapparaj -
Mmc could not create the snap-in (WIN8)
I got the following error when I run the hyper-v manger in win 8 , any idea?
Please click the Mark as Answer button if a post solves your problem!Hi,
Which your current user, to manage Hyper-V you must have the administrator or Hyper-V administrators group account permission. Or you can install the Remote Server Administration
Tools for Windows 8 then try again.
Download Remote Server Administration Tools for Windows 8
http://www.microsoft.com/en-us/download/details.aspx?id=28972
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Thank you ,
I tried login with the user administrator , then tried to opened hyper-v manger ,failed.
I even can't create the VM,so I don't think it is useful using the Remote Server Administration Tools .
BTW, the OS is win8.1 instead of win8.0
Please click the Mark as Answer button if a post solves your problem! -
Glom – Could not create the new database
I would like to try Glom, but always get the this error
"Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator."
This happens with both local and extern server configuration. Any ideas on how to fix this?
Regards,
RenkeIt would also help, if you install the application and just tell me, if you get the same error, when trying to create a database. Maybe it's just a problem on my side.
Regards,
Renke -
"Could not create the Java Virtual Machine" while running javaw -p
Hi All,
I have installed the JDK in system. After installing when I run javaw -p i am getting below error.
"Could not create the Java Virtual Machine"?. Can any one please help me?. I tried two or three times?. Due to that I am not able to use tools to write Java Code?
Please provide your helps.
Thanks
ThamayanthiWindows XP, I have checked the path variable also, see
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\PROGRA~1\IBM\SQLLIB\BIN;C:\PROGRA~1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;%JAVA_HOME%\bin;%ANT_HOME%\bin;C:\Program Files\QuickTime\QTSystem\;
JAVA_HOME = C:\Program Files\Java
Eclipse : Eclipse with Jboss
Any other thing I missing?
Where I can check from where eclipse is taking Java?
Thanks -
SAP-Documentum Interface - getting an error as: Could not create PLM DIR.
Hi all,
We are facing following problem with the interface of SAP-Documentum.
While linking multiple DIRs from Documentum, getting an error as: 'Could not create PLM DIR. (E26324) (Error in version number increment for version 00)'.
Observation:
It's getting failed in 'DIR_GET' every time, so attempts to create new DIR every time.
Note:
Recently upgraded to SAP ECC 6.0 EHP4.
Please help.
Thanks.Sachin,
There are couple of things you could do:
1) Try the same values and execute linking manually in sap by calling BAPI_DOCUMENT_CREATE2 in se37.
2) Try pre-pending zeros to the equipment number field using WebAdmin on Documentum side.
Send me a message if you need additional help. I have been working with Documentum-SAP integrations for over 10 years and pretty much seen every problem out there
Sachin
http://documentum-sap-expert.blogspot.com/
Edited by: Documentum-SAP-Expert on Jul 20, 2010 2:56 AM -
Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67. Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services -
Page could not create the iView. Error for KMC iviews
Hi,
I am getting this error for all KMC related iviews.
<i>Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.netweaver.coll.colcontent/com.sap.netweaver.coll.RoomCreation/com.sap.netweaver.coll.RoomCreationWizard
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file</i>
This is the description in the log file:
#Error#1#/Applications/comsaptcstylesStyleSheetLinkProvider#Plain###Style sheet link will be provided by WebDynpro since the style sheet link provider coding is not able to provide a style sheet link.#
Any clues?Hi Omri,
Harini gave the right solution.
I just want add a small detail:
The par file is actually a zip file.
The simplest way to "open" it (as Harini suggested) is to change its extention to ".zip" and open it with winzip.
Yoav.
Maybe you are looking for
-
My apps will no longer update as the page will not load, I really don't understand why this is as the rest of the app store works perfectly.
-
Dimension Security causing SSAS cube to slow down
Hi, Experiencing problems with with the SSAS cube once its processed. Sometimes takes around 20 mins for the excel to load once you drag down any dimension.The cube has got no calc scripts/named sets etc.It has around 17 dimensions and one dimension(
-
I would like to add a ssd to my pavilion DV7-3090ED
Hallo, I own a pavilion DV7-3090ED, and I'm looking to add a ssd,but i do not know if my pc has Sata I or Sata II. Does anyone knows how can i find out? Thanks! This question was solved. View Solution.
-
Hi, I am reading image from client system using the below code CLIENT_IMAGE.READ_IMAGE_FILE(v_rd_file_name, 'JPG', 'CTRL_BLK.ADD_IMAGE'); But this image is not displaying in the image item, this is happening for some particular images only. While wri
-
Can Mail 3.2(Leopard) be installed on Mac OS 10.4.11
I just got a new MacPro with Leopard & Mail 3.2 I'd like to replace my Mail 3.1 that's on another system running tiger with Mail 3.2 Is that doable? If yes, how would I go about it? thanks Jeff N