SAP Mobile Infrastructure and Mobile Asset Management Training

Hello All,
We would like to announce that SAP Education is offering the following courses the week of November 6, 2006 in Newtown Square, PA:
1. TMOB20 (Mobile Infrastructure Administration) 2 days
Course description link: http://www50.sap.com/useducation/curriculum/course.asp?cid=60168283
2. TZMAM2 (Early Product Training SAP Mobile Asset Management 2.5) 3 days
Course description link: http://www50.sap.com/useducation/curriculum/course.asp?cid=60205890
Please register as soon as possible to reserve your seat for these special deliveries. These are the only scheduled deliveries of these courses planned for the remainder of 2006.
To register call 1-888-777-1727 or 610-661-6501.
For questions call 1-877-876-7271 or post directly in this thread.
Best Regards,
Ted

Hi,
We have this answer in many other threads..
Mobile infrastructure (MI 2.5 / MI 7.0) is the older release of mobile.The latest version of mobile is NW Mobile 7.1 which comes with a total architectural change, provides better scalability and has advantages in many other areas like better modeling, monitoring options , faster device synchronization time etc.
Netweaver mobile constitutes of server (DOE) and a default client framework (Netweaver mobile client) .
Mobile application could be created using NetweaverDeveloper Studio(NWDS) that will present the data required by the mobile device user.
This mobile application once deployed on a device will work on the local persistency and during synchronization with DOE sends the modified/new data to Backend via DOE.
Customers can also develop a custom client framework and application that still talks to DOE (and inturn to backend)
NW mobile 7.1 could be used to build mobile applications suiting offline and onlines scenarios.
In few words to mobilize enterprise solutions
SAP R/3 will act as backend
---talks to DOE through remote enabled BAPI Wrappers ---
NW mobile will be middleware that does the data orchestration
Upon Synchronization of mobile device with DOE using a messaging protocol over http(s)
Receivers could be devices with client application installed / another server.
checkout this [configuration guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm] and [developer's guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm]
for understanding how to start with development with NW Mobile 7.1
Regards,
Liji

Similar Messages

Mobile Infrastructure and Mobile Engine

Hi,
does anyone know the difference between Mobile Infrastructure and Mobile Engine or is MI just the new name of Mobile Engine?
Thanks in advance
Chris
PS: In case someone has more information about mobile engine as @ the market place please let me know or post a link (Thanks!!!!)

Hi Christian,
I saw this info yesterday:
http://help.sap.com/saphelp_nw04/helpdata/de/c5/28055b97c32a46b110d5f2d27794df/frameset.htm (german)
Paul

Asset Accounting, EAM and Financial Assets Management.

Hi Friends,
Can any one please brief about these different terms used in SAP with respect to assets
Asset Accounting
EAM and
Financial Assets Management.
Are these all different components having different functionality.
thanks in advance.

Hi
Asset Accounting
EAM - Enterprise Asset Management (Accounting +Maintenance)
Financial Assets Management = Asset Accounting.
narendra.

Difference between Mobile sales and Mobile Service

Hi All
Can anybody help and explain me what are the major defferences between Mobile Sales and Mobile Service,What are the configuration settings required in Mobile Service,Because we have to start support project for Mobile Service.
Regards
Krishna

Hi Krishna,
The difference is Mobile Service is used by field technicians who provide a service to customers. Eg: an engineer who goes out to customer site to fix machinery. They can fill out the deatils on the Mobile Service application. Time spent, parts used etc..
Sales is used by sales reps, who are selling a product.
The configuration is the same for both. In fact its possible to have bothe sales and service installed on the same machine.
Regards,
Gervase

Difference between the SAP Mobile Infrastructure and SAP NW MOBILE7.1

Hello everyone, could you tell me what's the difference between the SAP Mobile Infrastructure http://help.sap.com/saphelp_nw04/helpdata/en/a7/893a5889e08b41b615688b1a93b559/frameset.htm and SAP NETWEAVER MOBILE 7.1 http://www.sdn.sap.com/irj/scn/nw-mobile-tools;jsessionid=(J2EE3417800)ID0940784850DB22002277755496926773End ? I have to develop a mobile application and I have studied the MDK 2.5 here http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/21eba3a7-0601-0010-b982-92f1fca3258a&overridelayout=true , but now I have come to doubt whether I have done well to study MDK 2.5 for my purpose.

Hi,
We have this answer in many other threads..
Mobile infrastructure (MI 2.5 / MI 7.0) is the older release of mobile.The latest version of mobile is NW Mobile 7.1 which comes with a total architectural change, provides better scalability and has advantages in many other areas like better modeling, monitoring options , faster device synchronization time etc.
Netweaver mobile constitutes of server (DOE) and a default client framework (Netweaver mobile client) .
Mobile application could be created using NetweaverDeveloper Studio(NWDS) that will present the data required by the mobile device user.
This mobile application once deployed on a device will work on the local persistency and during synchronization with DOE sends the modified/new data to Backend via DOE.
Customers can also develop a custom client framework and application that still talks to DOE (and inturn to backend)
NW mobile 7.1 could be used to build mobile applications suiting offline and onlines scenarios.
In few words to mobilize enterprise solutions
SAP R/3 will act as backend
---talks to DOE through remote enabled BAPI Wrappers ---
NW mobile will be middleware that does the data orchestration
Upon Synchronization of mobile device with DOE using a messaging protocol over http(s)
Receivers could be devices with client application installed / another server.
checkout this [configuration guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm] and [developer's guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm]
for understanding how to start with development with NW Mobile 7.1
Regards,
Liji

Meta data and data asset management

I am looking for suggestions and or products that can support managing our footage.
Our goal is for an editor to search for a clip using the data entered in the “description” (metadata) field of clips and sub-clips that have been logged in various projects.
Here is the outline.
We record clips of high def footage and we import batches of these clips; sometimes a few dozen, and sometimes thousands. We bring these batches into a Premiere Pro CS5 project by importing the video clips from within a P2 card folder structure, or avchd, or dslr footage or ??/any format we collect...
We log a description of the clips and of sub-clips, and then we edit a film from those elements. After 1 project, or after 50 projects, we have all the detailed description (metadata) we've entered about each clip and sub-clip captured, and this data lives within the CS5 project. We can only search it from within the original project.
If we start a new project and we need to look back at footage from old projects, we can only search for footage by going into that old project . We would like to have the metadata write back to our archive (or a copy of the footage in a new archive.) If the archive and the clips and sub-clips had the metadata from the project we could search and find assets. Among the obstacles is that sub-clips share the name of the clip it comes from so there is no “place” for it’s metadata. We've tried using Project Manager>Collect Files & Copy to New Location but the subclip .mxf files created through this process are copies of the source clip despite being labeded "random.subclip001". When imported, this "random.subclip001" file shows up in Premiere as the original "random" source clip name.
We are looking at a small library – but it’s big for us. About 20 terabytes… A typical client might have 4-6 terabytes of assets we would like to look through for a shot, or an interview… Has anyone made inroads on this?
Many thanks for any thoughts and ideas.
Sincerely,
Rees Candee

Hi Abhilash,
Meta Data-
In BW the meta-data contain data about data.
It is like having information about the information.
You have the business related meta-data for example the description used in your reports or the technical related meta-data for example the rules used in the transformation or the extraction. These are the two types of meta-data you have in the metadata repository that you manage with the metadata manager
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6197e07211d2acb80000e829fbfe/content.htm
Meta Data Repository
It is the repository which Manages Meta Data, for example like when talking about an ODS in the metadatarepository you can read about which characteristics, key figures, infosource and updaterules are used in it. And creation date, owner etc.
Thanks,
Sudhakar
saying thanks in sdn == assigning points

Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App

I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!

Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman

Upgrade on SAP Plant Maintenance and Product Data Management

Hi Gurus,
I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules.
Please guide me what are the steps to follow and provide more information on this ...
Thanks in advance!!!!!!!!!
Regds,
RK

Hello Kurni,
In PDM/PLM latest version is PLM 7.0.
There are many new functionalities available in this version.
Earlier version can be accessed from SAP GUI, but the latest one can be accessed from Portal/NWBC.
DMS side many notes have to be applied as you will be instaling EHP4.0 as part of the upgrade.
ECM side some standard reports are missing in PLM 7.0, which were available in ECC6.0.
Regards
Prasad K

SAP AutoID Infrastructure vs Sybase SUP Mobile based solutions for RFID???

Hello All,
I'm trying to come up to speed on the basics as we have projects going that have RFID, Barcode and mobile design implications. As mobile has evolved we're looking at some opportunities give the number of consumer level devices available. We know we won't be able to simply replace all existing (ruggedized, etc) devices but the oppertunity is there to do some new things, or old things with new devices. At the same time we have our existing RFID infrastructure (Not SAP AII). My question is... is there any overlap between an SAP AII infrastructure and Mobile Infrastructure? For example from what I gather an AII infrastructure typically has an RFID middleware for data management device monitoring, etc that is integrated with SAP AII. Sounds very similar to mobile architecture with a middleware piece taking care of decide management data integration & management etc. Kind of troubling to me that 2 pieces of heavy infrastructure are needed for these two scenarios. Oh and lets talk XMII also which we also have installed.
So just comming up the curve on all this. Is there any overlap here where RFID architecture could be handled by a good mobile design? I suspect any overlap is conceptual and the rub will be the device support.
Thanks,
Doug

Hi
I have been following SAP Mobility as well. These are my gathering.
SAP Sybase SUP - This is being recommended for heavy weight applications. There are additional components on the SUP layer as, Sybase Control Center and Afaria for monitoring and device management.
Project Gateway - This is being recommended for light weight application. It does not require any additional infrastructure, only software components to be added. I have not heard of any release date for this product. Conceptually it seems very good and based on the demo that was presented in Tech Ed 2011, the development was very simple as well.
ITS Mobile - This is integrated ITS in ECC. SAP console has been replaced with product. This is used mainly for the RF transactions in Warehouse Mgt. No additional infrastructure, some minimum configuration and ABAP development.
BI Mobile - This requires an additional infrastructure and software components to be added where by BI can interface with the mobile devices.
SAP Sybase have also built solutions for Workflow using the SUP platform.

HI, want to connect XI and Mobile

hi,
Experts,
I am new to mobile world.
can you please tell me how to connect Mobile and XI.
I want to know the flow between Mobile and XI, how data will go?
I have heard about mobile gateway, what is it?
What changes I have to make in XI server to support Mobile connectivity?
Thanks.
Waiting for replies..

Hi divyesh vasani,
Welcome to Mobile Infrastructure... you can easily get along with MI by just following some of the links below:
- what is mobile infrastructure?
-Mobile--XI--R/3
2. R/3 Gateway for mobile
Document for Data Flow between Mobile and XI is a very good Document for understanding <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d">Integrating Mobile Device With SAP XI</a>
PS: Do Reward points if this helps you...
Cheers,
kumarR

(Mobile Infrastructur)Failed to get hierarchy group elements fromMiddleware

When iam configuring the Mobile Infrastructure and clicked on Hierarchy Grouping i got the following error.
Error:Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware
Could anyone tell meaning the above statement and why it is occuring.
Secondly when iam trying to start the MI Webconsole from the below URL, I was getting Page Cannot be Displayed Error.
https://server:50300/me/WebConsole/login. Can anyone tell why this error is coming.

Dear Sankar,
SAP wants you to use the NWA Mobile Administrator and not the old WebConsole. As for the error, I think it should be solved by now, considering you solved other NWA issues by either using solutions of redeploying sapjra, re-running of NWA templates under Deploy and Change or by returning back to your original NWA connected ABAP client (as is evident from your other thread).
Regards,
Veera

Jabber and Mobile Connect

Just setup Jabber (9.0.2) on iphone with Mobile Connect (CUCM 7.1.5). I run into incoming call issue where both Jabber & mobile phone would rings about the same time. I did some of research and Cisco doco below state Mobile Connect should automatically inactivated when Jabber is running and connected to the corporate network.
Anyone has this issue or could point me to the right direction?
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9.0/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#CJAB_TK_ADA0EB97_00
Add Mobile Connect and Mobile Identity
Mobile Connect, formerly known as Single Number Reach (SNR), allows the native mobile phone number to ring when someone calls the office number while Cisco Jabber is not available.
When Cisco Jabber is running and connected to the corporate network, and thus available to receive VoIP calls, Mobile Connect is automatically inactivated.
The user requires a Mobile Identity to transfer Cisco Jabber VoIP calls to the mobile voice network.

Remote Destinations will always ring, regardless of whether the TCT device is registered or not. A Mobile Identity will not ring when the TCT device is registered to CUCM. This is especially important as you don't want the cellular phone and the wifi phone app contending for the user to click answer on both on the same device. You may still want to use RDP if the user has a home office in addition to their smartphone.

Mobile Blog and Forums

Hi All,
We need to create a Mobile App as part of the application.
Do we have Out of the Box commercial product for implementing Mobile Blogs and Mobile Forums.
Please suggest.
Cheers
Bhaskar

Use search engine to find some third-party products. But I think there is no available blogs and forums app.

Pool asset management planning board (PAM03)

Hi experts,
PAM03 comes with default icons/labels for vehicle pooling. For example in the tool bar there is a filter for 'licence plate' or 'vehicles' for sorting. As you know the PAM can be used for variety of assets such as IT. I wanted to know if you've ever attempted to update the planning board to be used for assets other than vehicles.
I believe in note 1272432 there is mention to this functionality using function module PAMS_GRAPH_UC_OTHERS. I'm still trying to figure out how this works so any input is appreciated.
Thanks

Hi PAM user, the steps necessary for PAM are described in the following places, at the sap Help portal
http://help.sap.com/erp2005_ehp_04/helpdata/en/2b/1a73268dd74a0988c00a90171294f7/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0b/5ad2c9e2f249abad4df1479243a001/frameset.htm
Make sure you activate the SAP Business Function for PAM, which is LOG_EAM_PAM (via transaction SFW5). This will also provide the right settings within config for the planning board and Pool Asset Management.
Only thing that does not automatically gets updates, is table PAMS_VSTAI, which needs to have the following entries:
Pool Asset Management   ABGH    04      Productive Split        I3908   Picked Up
Pool Asset Management   AUFE     02      Completed Split I3910   Settled
Pool Asset Management   DISP       01      Productive Split        I3902   Assigned
Pool Asset Management   GELA              Completed Split I3905   Deleted by requestor
Pool Asset Management   GELD              Completed Split I3903   Deleted by planner
Pool Asset Management   NDIS      01      Reqmt   I3901   Need
Pool Asset Management   RESM    06      Productive Split        I3907   Reserved
Pool Asset Management   RGBE    03      Completed Split I3909   Returned
Pool Asset Management   STAN    05      Completed Split I3906   Need revoked
Pool Asset Management   STOR    05      Completed Split I3904   Planned need revoked
Pool Asset Management   SY01    08      Absence         Maintenance/ Repair
Pool Asset Management   SY02    07      Absence         End of Leasing
I hope this helps you in setting up the solution. Feel free to provide feedback on if it worked.
Cheers,
Hanneke

Pool Asset Management- Planning Board

Hi Guys,
We are in the process of implementing PAM in our company.
I have done the config based on the note ; 1272432 up to certain extent. When i go to PAM03-planning board, the following message is appearing " Illegal number of columns in chart(231, 1, 0), Sum of columns in chart is not equal".
I could not able to find the configuration part for this.
Also in the planning table, i could able to see the request, but i am not able to see the equipments assigned to Pool (functional location category).
Kindly provide your valuable inputs.
Thanks&Regards,
Pavan

Hi PAM user, the steps necessary for PAM are described in the following places, at the sap Help portal
http://help.sap.com/erp2005_ehp_04/helpdata/en/2b/1a73268dd74a0988c00a90171294f7/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0b/5ad2c9e2f249abad4df1479243a001/frameset.htm
Make sure you activate the SAP Business Function for PAM, which is LOG_EAM_PAM (via transaction SFW5). This will also provide the right settings within config for the planning board and Pool Asset Management.
Only thing that does not automatically gets updates, is table PAMS_VSTAI, which needs to have the following entries:
Pool Asset Management   ABGH    04      Productive Split        I3908   Picked Up
Pool Asset Management   AUFE     02      Completed Split I3910   Settled
Pool Asset Management   DISP       01      Productive Split        I3902   Assigned
Pool Asset Management   GELA              Completed Split I3905   Deleted by requestor
Pool Asset Management   GELD              Completed Split I3903   Deleted by planner
Pool Asset Management   NDIS      01      Reqmt   I3901   Need
Pool Asset Management   RESM    06      Productive Split        I3907   Reserved
Pool Asset Management   RGBE    03      Completed Split I3909   Returned
Pool Asset Management   STAN    05      Completed Split I3906   Need revoked
Pool Asset Management   STOR    05      Completed Split I3904   Planned need revoked
Pool Asset Management   SY01    08      Absence         Maintenance/ Repair
Pool Asset Management   SY02    07      Absence         End of Leasing
I hope this helps you in setting up the solution. Feel free to provide feedback on if it worked.
Cheers,
Hanneke

SAP Mobile Infrastructure and Mobile Asset Management Training

Similar Messages

Maybe you are looking for