SAP MTE Auto-Reaction to delete spool from satellite

Hi,
Please could anyone HELP me in setting up the SAP MTE Auto-Reaction to delete spool from satellite system with the threshold in CCMS reaches 80% using a event triggered background Job.
Regards,
Pramod

Hi,
Hav you ppl try to create your own Auto reaction method with te report RSPO0041, i guess we can proceed like this.
and check this too [http://help.sap.com/saphelp_nw04/helpdata/en/27/cbdf3b8dc95136e10000000a114084/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/27/cbdf3b8dc95136e10000000a114084/frameset.htm]
Thanks,
Jansi

Similar Messages

  • SAP-CRM - Auto Confirmation of Contract Account from IVRS to SAP-CRM IC Web

    Hello Experts,
    In Our Projects we are Using SAP-CRM Web Client for Call Center Processes. AVAYA is a Third Part agency which have developed the IVR system for handling the Consumer Calls. We have Developed BAPIs which will fetched data from SAP based on Contract Account entered by Consumer on IVRS. AVAYA have developed the CTI Pop-Up also which have several Consumer Details along with CA. Now Client wants that CA , entered by Consumer on IVRS, will be autoconfirm to CRM - Web Client. If anyone have any document for doing all these setting please share with us & Provide us guidelines...
    Regards,
    Abhishek Chopra

    Hello Abhishek.
    You can refer to [Note 707104 - Account identification from attached data|https://service.sap.com/sap/support/notes/707104]. It describes how to set autoconfirmation based on CAD.

  • Local auto reaction method no longer linked to MTE

    Strange one.... all my local autoreaction methods have disappeared from from my MTE properties in RZ20. The methods still exist in RZ21 and the 'where used' reports that it is still inked to that MTE. Have checked that the mehtod is released for variant * (which is the acitve variant).
    Any ideas would be helpful as the only option is to link the methods again manually.....which is mind numbing task. Anyone got a way of linking an autoreaction method (local) to multiple MTE's?
    Thanks in advance,
    Marcus

    Dear Team,
    As I have understood, you want to be informed each time a satellite system is not up and running ?
    Option 01
    ========
    1. Install the CCSMPING agent in SOLMAN
    2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
        Create all satelittes systems ...
    3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
        in RZ21 (point 2).
    This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
    Option 02
    ========
    1.Install the CCSMPING agent in SOLMAN
    2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
        Create all satellites systems.
    3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
        Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
    4. Select one satelitte system
    5. Open "Availability"
    6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
    7. When selected, click on "Properties" button.
    8. Then, you assign here an auto-reaction method - for example :
        "ccms_send_alert_to_alm_ccms_containerv4".
    9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
    10. In this method, add you email address.
    11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
    12. Then, the alert will be automatically sends to your email adress.
    Hope it helps ?
    Best regards
    SAPNetWeaverAdmin

  • Central auto-reaction for weinqueue and weoutqueue - which MTE Class

    Hello,
    In my CEN system (SAP Solution Manager), I want to assign a central auto-reaction method - for all my managed systems - regarding :
    1. IDoc Inbound Queue - weinqueue
    2. IDoc Outbound Queue - weoutqueue 
    In SAP Solution Manager, from RZ21, Technical Infrastructure, Configure Central System, Assign Central Autoreactions,
    you choose the managed system SID, the MTE Class and the "Central Autoreactions".
    Do you know what is the MTE Class for both "IDoc Inbound Queue - weinqueue" and  "IDoc Outbound Queue - weoutqueue" ?
    Thanks
    Best regards
    PC

    Hi PC,
    it is ALEIDcMTClass but its common for both Inbound and outbound idocs (Generic).
    the other option is ALEIDcMTAttCl but it s generic and is specific to a object you are looking at.
    You have to manage/configure the autoreaction according to the object you are looking at.(Monitoring object).
    Thanks,
    jagan
    Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:32 PM
    Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:33 PM

  • Deleting Equipment from SAP R/3

    Once I set the cancel flag for an equipment how I can delete completely from SAP R/3 the equipment?
    Thanks

    Hi Magnelli,
    Yes you can delete the equipment from the database through archiving process.
    SAP says that if you want to archive and delete the equipments then you have to first archive and delete following documents
    such as 1. Maintenance Plans 2. Serial Number History 3. Service and Maintenance Orders, 4. Routings, 5. Maintenance Notifications, 6. Quality Notification, and 7. Service Notifications.
    Archiving Equipments can be done by using archiving object PM_EQUI.
    Check Archiving Object Technical settings ....See that deletion is automatic.
    Steps are:
    Easy access --> SARA ---> Write ---> create write variant and select all the eqipments that you want to delete ---> click Attributes --> Enter the text in Meaning field ---> SAVE.
    2. Maintain Spool parameter
    3. Maintain Start date
    4. Execute and check the session number in job log.
    With this you archiving and deletion will be done in one step.
    -Thanks,
    Ajay

  • Central auto-reactions for individual MTEs, not entire MTE classes

    Hello.
    I am trying to set up central autoreactions on a Sol Man system (CEN) to monitor certain MTEs on a satellite system (soon to be many more satellite systems and other MTEs). I know that auto-reactions can be assigned to a satellite system and specific MTE class in RZ21 on CEN, but I don't want auto-reactions for every MTE in a specific class. For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
    Has anyone else achieved this? If so, I'd love to hear your recommendations. Any help is appreciated!
    Thanks!

    Hello Matthew,
    central autoreaction is only possible for MTE classes.
    > For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
    In this case: change the MTE class. As you use already agents (otherwise central autoreaction would not be possible) you can configure the agent to use MTE classes different to the default ones.
    The Online documentation for the agents describes this: [Monitoring Operating System Data with CCMS Agents|http://help.sap.com/erp2005_ehp_03/helpdata/EN/2b/6dcd06dc6b084a840f209e027e39b1/frameset.htm].
    Regards, Michael

  • Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

    Issue:
    I have SAP BW system and SAP HANA System
    SAP BW to SAP HANA connecting through a DB Connection (named HANA)
    Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
    Executed the Open Hub service without checking DELETING Data from table option
    Data loaded with 16 Records from BW to HANA same
    Second time again executed from BW to HANA now 32 records came ( it is going to append )
    Executed the Open Hub service with checking DELETING Data from table option
    Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
    If checking in SAP BW system tio SAP BW system it is working fine ..
    will this option supports through DB Connection or not ?
    Please follow the attachemnet along with this discussion and help me to resolve how ?
    From
    Santhosh Kumar

    Hi Ramanjaneyulu ,
    First of all thanks for the reply ,
    Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
    in that there is check box i have selected already that is what my issue even though selected also
    not performing the deletion from target level .
    SAP BW - to SAP HANA via DBC connection
    1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
    2. second time again executed from BW - now hana side appaended means 16+16 = 32
    3. so that i used to select the check box at OH level like Deleting data from table
    4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
    Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
    Thanks
    Santhosh Kumar

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • How to delete items from the list of "auto-open" tabs that load whenever FF4 opens?

    When I recently downloaded FF4, I was asked if I'd like to have FF automatically open the same tabs as were set in my IE. Great! Worked perfectly until I set those tabs as App Tabs. Now both the App Tabs and the original IE set of tabs open whenever I open FF -- essentially each tab loads twice -- as app tab and large tab. How can I delete tabs from the list of "auto-open" tabs? In addition, for some reason, every time I try to set my home page, it's not working -- I keep getting the same home page regardless of how many times I have tried to set a new one.

    You can close a tab with a middle-click or with a left click on the close X on the tab or via the right-click context menu of that tab.<br />
    Do those tabs come back if you close then and lose Firefox?

  • Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    Hi,
    For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
    I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
    But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
    Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
    BR,
    Mangesh

  • Want to delete Rows from SAP Query which have u20180u2019 or blank values

    Hi Experts,
    I have made one sap-query,  in that I have added some additional fields, after that I am getting some blank or u20180u2019 values in some rows, can anyone tell me how to delete those rows which have u20180u2019 or blank values.
    Regards
    Mahadev Roy

    Hi mahadev
    You must be fetching data from SQ02 in some internal table.Delete values from that internal table.
    Also as you are fetching records from SQ02 then in the select statement you can put this condition of '0' and blank
    so that you will get appropriate result.
    Thanks
    Khushboo

  • Several sap personnel numbers to be deleted from Production

    Hi All ,
    There is approx. 400 sap personnel numbers to be deleted from Production.
    What is your recommendation for the process? How should this exercise be done in Production.
    Please advise.
    Thanks and Regards ,
    Shivangi

    Hi,
    I am Not V sure if the report is executable in Live Client.
    Another Alternative which we adopted is an LSMW recording of PU00 & used it for mass deletion.
    You can explore this option also....

  • How can we delete prospects from SAP CRM

    Hello All,
    How can we delete prospects from SAP CRM in back ground for a list of selected BP's.
    Thanks,
    Raj.

    Hi Raj,
    You can use tx BUPA_DEL to delete the BP's you don't need anymore.
    Cheers,
    Heber Olivar

  • Auto archive log deletion from single location out of multiple locations.

    Hi,
    I am running database on 11r1 version.
    I have set two archive log locations. now i want archive logs to be deleted through RMAN from only one location the other location shouldn't be affected. what are the specific parameters to be set. Is there any specific command for this please advise.
    Thanks in advance.

    If you see Hemant's reply in the below link, he had shown how to delete archives from 1 location.
    RMAN backup with 2 archive log locations

  • HT201077 auto delete photos from icloud

    Any photo that I used to take with my apple devices, once saved to the cloud would automatically delete after about a month or two. the reason for this is because they would automatically download into Events on my iPhoto on my laptop. they would be titled, example, "May 2013 Photo Stream." For some reason it no longer does this. Is this because of a recent iPhoto update or something? Now they are just staying in the cloud and filling up my space fast

    Automatically importing photo stream photos to your events in iPhoto does not delete them from photo stream on your phone.  Photo stream photos remain on your phone until you either delete them, or reach 1000 photos.  (After you reach 1000 photos, the oldest photo is removed to make room for a new one; i.e., your phone keeps a rolling collection fo your last 1000 photo stream photos.)

Maybe you are looking for