SAP Net Weaver Version 7.0 Installation

Hello Experts,
Iu2019m totally new in SAP products and I would like to ask about the installation steps as the following:
1-Iu2019m planning to install the following SAP products in one server (16GB RAM, 1TB HDD, Win 2003):
A-Oracle Database Version 10.2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
So, is that the right order for the installation, can I install all this products in one server as a demo server?
2-I start the installation steps and I have finished the Database setup (10.2 then patch 10.2.0.4) then installed SAP Solution Manager Version 7.1 and I select Central System Installation Type, and the installation is Finished Successfully, but after the installation I did not find any new programs under windows start menu or all programs, I just found SAP Management Console, so is that the right behavior for this type of installation or I miss something?
3-I follow up all the steps that found in Solution Manager Master Guide until post installation tasks, the first step is to logon the application server, but I did not found it in the all programs menu is that the right behavior?
Thank You And,
Best Regards.
Tarek Salama

Hi ,
Welcome to World of SAP !
Please find the suggestions for your queries .
1- Install all the products in one server is not possible .
For each product kindly go through the SAP Installation Guides available
in SAP Market Place . To be more precise kindly study the SAP architecture
basically R/3 3 tier architecture . this will answer your query regarding
installation of Database , SAP application, and Frontend (SAP GUI)
To know About installation & Master Guides of all the below listed product check the link
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SWDC_ALIAS&TMPL=INTRO_SWDC&V=INST&SWDCQL=swdc&SELAREA=swdc1&SUBLEVEL=A_1_2_2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
First of all  not possible to install all the products in one server even for demo .
2- Good you have installed the solution manager Kindly follow the Product Availability Matrix PAM before installing the product.
and kindly study the basic architecture and then start installing SAP products .
3.As same as Answered above . Kindly check the links for SAP BASIS practice
SAPEDU Twitter account : http://twitter.com/sapedu  
SAP Education Facebook page: http://www.facebook.com/SAPEducation
Education@SAP LinkedIn group: http://www.linkedin.com/groups?gid=1856570
To know the pam on windows : SAP on Microsoft Windows
SAP Basis Tips: http://www.sap-img.com/sap-bc.htm
SAP Books:  http://www.sap-img.com/sap-books.htm
SAP Training CBT: http://www.sap-img.com/sap-training-cd.htm
SAP Jobs:  http://www.sap-img.com/sap-jobs.htm
SAP help :  http://help.sap.com/
About SAP :  http://en.wikipedia.org/wiki/SAP_AG
                   http://en.wikipedia.org/wiki/SAP_R/3
regards,
S.Rajeshkumar

Similar Messages

  • Sap net Weaver Sneak preview edition installation Fails.

    Hi all,
    I couldn't finish the installation for SAP NetWeaver sneak preview installation.
    Installation failed in the IMPORT ABAP step.
    I have many Import package Errors .
    All the packages (18) SAPSSEXC, SAPAPPL1, SAPAPPL0, SAPSDIC... end up with errors.
    I have no idea Why.
    Log file is of no help to me.
    I have tried it several times already .
    But I am still stopped with the same error.
    Thanks if you have already experienced this pb .
    OS is Windows XP SP1 .
    Regards
    Yvon

    Hi All,
    We had the same problem when we installed Solution Manager 7.0, Oracle 10.2 and j2sdk 1.4.2_12.
    The problem was oracle was not running. We have to run oracle manually in command prompt.
    This is how when we resolved and worked fine. Follow these steps in command prompt.
    1. Check R3trans -d; If R3 finished with error(0012) follow the below steps.
        1.1 Check services.msc whether oracle listeners are started or not; if not please start.
    2. Go to oracle drive.    
    Use the following commands:
    3. sqlplus /nolog
    4. connect /as sysdba
    5. If result displays:
    "SQL> connect /as sysdba
    Connected to an idle instance.
    6. Use this command next: archive log list (i.e, SQL> archive log list)
    ORA-01034: ORACLE not available" - If this is the result, then startup the oracle.
    7. Use this command next: startup (i.e, SQL> startup)
    Then result should say: "ORACLE instance started."
    That means oracle instance is started successfully.
    Now, Retry the step where you left. It will work fine.
    Please let us know if you need any further details need.
    I know this thread was initiated long time back; but i want to share our experience with you. It may be helpful to someone later who encounters these kind of issues.
    Thanks and Regards,
    Sanjai Prabu Govindan

  • Require link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1

    can any1 provide me the link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1,Plz ..

    Hi Pedro,
    could you fix the error?
    I'm installing and I have the same problem.
    An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Archivos de programa/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
    Thanks.
    Anibal

  • SAP Net weaver Development studio

    Hi All,
    We are going to implement SAP Portal in my office soon .
    I am planning to try small Java applications etc . pls advice is it posible to  download and use SAP Net weaver Development studio
    without sap in my system .
    Just i wanted learn basics of SAP Net weaver Development studio.
    Thanks,
    Rani

    Hi Rani,
    answering your question in short: yes and no.
    A bit longer: yes, if you have authorization to the NWDS download page, then you can download it, and work with it locally, but without a SAP J2EE Engine you cannot test your application in runtime, as you cannot deploy it anywhere.
    As an alternative, you can also create a Developer Workplace installation, which includes an NWDS and a local J2EE Engine you can use to do local tests. Both will be installed on your client side machine. This kind of engine intallation is not meant to be serve a complete server, but meant to be only for testing your local developments on client side.
    Some info on DWP:
    #924983 -- Developer Workplace Installation for SAP NetWeaver 7.0
    (http://service.sap.com/sap/support/notes/924983)
    A forum thread in this topic:
    Netweaver developer workplace and Infrastructure
    (I tried to find a CE version of these infos, maybe someone else can add this info.)
    Best Regards,
    Ervin

  • Reg:SAP Net weaver CE 7.2 ,AS Java is not starting

    Hi,
    i am new to SAP Net-weaver CE 7.2 ,i have installed SAP NW CE 7.2 Trial version on my system.But when i start the SAP MMC
    AS Java proess is not starting.
    In the developer trace file it is mentioned that Connection to message server failed.i think the  problem is with default communication ports used  by the SAP.
    Can any one suggest me how to change these default ports to some other ports ?
    The trace file says the following:
    M [Thr 4516] Tue Oct 05 12:31:59 2010
    M  [Thr 4516] ***LOG Q0I=> NiPConnect2: 172.25.0.127:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 4516] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 1492
        (SI_ECONN_REFUSE/10061; I4; ST; 172.25.0.127:3201) [nixxi.cpp    3255]
    E  [Thr 4516] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 33 [enxxtc.c     346]
    M 
    M [Thr 4516] Tue Oct 05 12:32:00 2010
    M  [Thr 4516] ***LOG Q0I=> NiPConnect2: 172.25.0.127:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 4516] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 1512
        (SI_ECONN_REFUSE/10061; I4; ST; 172.25.0.127:3901) [nixxi.cpp    3255]
    M  [Thr 4516] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 4516] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 4516] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    Thanqx in advance..............

    >LOG Q0I=> NiPConnect2: 172.25.0.127:3201: connect (10061: WSAECONNREFUSED: Connection refused)
    Mean your application is not able to connect to IP 172.25.0.127 on port 3201.
    what is your server IP? can you please do below test from command prompt
    telnet 172.25.0.127 3201
    also send log from dev_icm

  • How to download and install SAP Net Weaver Gateway Plug-in for Eclipse?

    I have installed the SAP UI5 development tool kit for Eclipse. What else should I do? How can I download SAP Net Weaver Gateway Plug-in for Eclipse?
    After developing the application, should I run that with Apache Tomcat? How to get the access to database?

    you can find netweaver gateway tool from SAP Development Tools for Eclipse. and follow the installation instructions

  • Does Session Sharing feature provided by SAP Net Weaver application server

    Hi All,
    Session Sharing is an additional feature provided by Tomcat , Weblogic  and Web sphere application servers.
    Is this feature available in  SAP Net Weaver application server?
    Brief description on Session Sharing
    Session Sharing  specifies whether HTTP sessions are shared across multiple Web applications.
    In Weblogic this is an optional feature customizable in weblolgic-application.xml
    Sample weblogic-application.xml
    <?xml version='1.0' encoding='UTF-8'?>
    <weblogic-application xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <session-descriptor>
          <persistent-store-type>replicated_if_clustered</persistent-store-type>
          <sharing-enabled>true</sharing-enabled>
    </session-descriptor>
    </weblogic-application>
    session-descriptor (Optional Element ) - Specifies a list of configuration parameters for servlet sessions.
    sharing-enabled (Optional Element ) - Specifies whether HTTP sessions are shared across multiple Web applications. Default value is false.
    Thanks in advance.
    Regard's
    Srikanth
    Edited by: Srikanth A on May 14, 2010 7:36 PM

    Hi,
    You cannot set up Garbage collection frequency. it is internally handled by Java when the Heap size is filled up.
    You can always fine tune your server to SAP recommendations.
    Note 723909 is a good starting point.
    Also other checks include that you use SAP recommended Java versions, OS patches and also that you have enough physical memory.
    Thanks & Regards,
    Vijith

  • We are trying SAP Net weaver mobile IM?

    We are trying SAP Net weaver mobile IM? Where I can see records of all the activities / configuration changes by administrator etc?

    HI,
    I guess you are talking about Mobile Infrastrucutre (MI).
    Check out the installation guide for MI
    --> http://service.sap.com/instguides
    As well here you find a lot of info:
    http://jogel.blogspot.com/2006/07/learning-sap-mi.html
    Rgds Thomas

  • Hi Regarding How to work on SAP Net Weaver CE 7.1  and BPM

    Hi Friends
    I need Some help from u r side
       Currently i have got work on SAP Net Weaver CE 7.1  and BPM (Business Process Management)
       How to Work on these SAP Net Weaver CE 7.1  and BPM (Business Process Management)
      If u have any Documents .can u give that links
      How Configure SAP Net Weaver CE 7.1 with NWDI can u tell me this think also
    Regards
    Vijay

    Hi Friend,
    You can follow following pointers hope it will help.
    [SAP NetWeaver MDM-7.1 Key Mapping interoperability with SAP NetWeaver Process Integration-7.1 using Web Services u2013 Webinar Presentation|FEATURED EVENTS;
    [Best Practices Workflow for Master Data Managemen|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f1c01b-972d-2c10-3d9d-90887014fafb]
    [Best Practices on Workflow Tools Usage for Master Date Management (MDM) Scenarios - Webinar Presentation|http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/c0fee6f1-8795-2c10-8ca9-e4883bae5e81]
    Regards
    Jeetendra

  • Is SAP net weaver environment necessary to configure/customize IC Webclient

    Hello Expert,
    Is SAP net weaver environment necessary to configure/customize IC Web client and Internet sales?
    Please guide me.
    Thanks & Regards
    Satish

    Single Sign On is optional.
    What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
    It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
    Cheers.

  • Reg:SAP Net weaver CE 7.2 ,Java Server is not starting

    Hiiiii,
        This is Ravi , i am new to SAP NW.I have installed the SAP NW CE 7.2 trail Version.The problem is that when i open the SAP Management console,only one process is running out of two processes of process list.
    i.e.,only igswd.exe  is running and it turned to green color.
    But as i mentioned jstart.exe is not getting started.
    The installation doesnt report any errors while  installation,finally i got the alert box saying that installation is sucessfully completed.
    Developer trace of jstart.exe says that some  IP address is rejecting connection and cant connect to message server.
    The trace file code is  shown below.
    trc file: &quot;dev_jstart.2356&quot;, trc level: 1, release: &quot;720&quot;
    u00A0
    trc file: &quot;dev_jstart.new&quot;, trc level: 1, release: &quot;720&quot;
    sysno      00
    sid        CE1
    systemid   560 (PC with Windows NT)
    relno      7200
    patchlevel 0
    patchno    22
    intno      20020600
    make       multithreaded, Unicode, optimized
    profile    D:\usr\sap\CE1\SYS\profile\CE1_J00_rv
    pid        2356
    u00A0
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      All, egi
    u00A0
    Mon Oct 04 16:41:26 2010
    *  trace logging activated, max size = 52428800 bytes, 2 versions
    u00A0
    arguments :
      arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
      arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_rv
    u00A0
    F 
    F [Thr 2360] Mon Oct 04 16:41:26 2010
    F  [Thr 2360] *** WARNING => SfCheckJeeVersion: Cannot find JEE application directory D:\usr\sap\CE1\J00\j2ee\cluster\apps. [sfxxmain.cpp 861]
    F  ********************************************************************************
    F  Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
    F    root directory    : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
    F    vendor            : SAP AG
    F    version           : 1.6.0_07
    F    cpu               : x86
    F    java vm type      : server
    F    java vm version   : 6.1.007
    F    jvm library name  : jvm.dll
    F    library path      : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
    F    executable path   : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
    F  ********************************************************************************
    F    SAP extensions    : available
    F  ********************************************************************************
    I 
    I [Thr 2360] Mon Oct 04 16:41:27 2010
    I  [Thr 2360] MtxInit: 30002 0 2
    u00A0
    trc file: &quot;dev_jstart&quot;, trc level: 1, release: &quot;720&quot;
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      All, egi
    M  [Thr 2360] ***LOG Q0I=> NiPConnect2: 10.10.0.10:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 2360] *** ERROR => NiPConnect2: SiPeekPendConn failed <b>for</b> hdl 25/sock 1516
        (SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp    3255]
    M  [Thr 2360] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 2360] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 2360] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 2360] Mon Oct 04 16:41:28 2010
    M  [Thr 2360] ***LOG Q0I=> NiPConnect2: 10.10.0.10:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 2360] *** ERROR => NiPConnect2: SiPeekPendConn failed <b>for</b> hdl 33/sock 1496
        (SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3201) [nixxi.cpp    3255]
    E  [Thr 2360] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 33 [enxxtc.c     346]
    M 
    M [Thr 2360] Mon Oct 04 16:41:33 2010
    M
    The IP address  present in the above file is nothing but Network adapter(Microsoft loop back adapter)`s configured IP address
    plz help me in this issue...........
    Thanks In advance...........

    Hi, thanks for your reply but i didnt understand what u mentioned ..
    here i am providing the code containde in the file dev_ms ......
    trc file: "dev_ms", trc level: 1, release: "720"
    [Thr 1856] Wed Sep 29 17:38:59 2010
    [Thr 1856] ms/http_max_clients = 500 -> 500
    [Thr 1856] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
    systemid   560 (PC with Windows NT)
    relno      7200
    patchlevel 0
    patchno    17
    intno      20020600
    make       multithreaded, Unicode, optimized
    pid        3708
    [Thr 1856] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3708) [msxxserv.c   2226]
    [Thr 1856] load acl file = D:\usr\sap\CE1\SYS\global\ms_acl_info.DAT
    [Thr 1856] MsGetOwnIpAddr: my host addresses are :
    [Thr 1856]   1 : [10.10.0.10] 10.10.0.10 (HOSTNAME)
    [Thr 1856]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 1856]   3 : [192.168.0.100] rv (NILIST)
    [Thr 1856] Wed Sep 29 17:39:00 2010
    [Thr 1856]   4 : [5.65.8.100] 5.65.8.100 (NILIST)
    [Thr 1856] MsHttpInit: full qualified hostname = rv
    [Thr 1856] HTTP logging is switch off
    [Thr 1856] set HTTP state to LISTEN
    [Thr 1856] *** HTTP port 8101 state LISTEN ***
    [Thr 1856] *** I listen to internal port 3901 (3901) ***
    [Thr 1856] *** HTTP port 8101 state LISTEN ***
    [Thr 1856] CUSTOMER KEY: >P1178189040<
    [Thr 1856] build version=720.2009.08.31
    [Thr 1856] Wed Sep 29 17:43:12 2010
    [Thr 1856] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c   12499]
    [Thr 1856] *** ERROR => MsSClientHandle: MsSRead C0 (JC_rv_CE1_00), MSEINTERN [msxxserv.c   5212]
    [Thr 1196] Wed Sep 29 17:57:51 2010
    [Thr 1196] MsSExit: received SIGINT (2)
    [Thr 1196] set HTTP state to CLOSED
    [Thr 1196] *** HTTP port 8101 state CLOSED ***
    [Thr 1196] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3708) [msxxserv.c   7442]
    My system is connected to vpn

  • Error in processing  SAP Net Weaver 2004's Support Release 2

    Hi,
           While installing PI 7.0, it wil asks for solution manager key, after entering the key starts proceessing the phases, While processing I got an error which is given below.
    An error occurred while processing service SAP NetWeaver 2004s Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation. You may now
    press Retry to repeat the current step.
    press the View Log button to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
                                                                                    retry  viewlog     stop
    Wat i hav to do now to solve this error. suggest me.

    I recommend to use j2sdk-1_4_2_15-windows-i586-p with 32bit and j2sdk-1_4_2_16-windows-amd64 (special edition for Netweaver) for 64bit systems. Refer to the notes on these issues:
    Note 716604 - Access to Sun J2SE and recommended J2SE options
    Note 801868 - Java(TM) Web Start in XI 3.0 FAQ-Troubleshooting
    Note 941595 - Download J2SE 1.4.2 for the x64 platform.pdf
    Note 943498 - J2EE Engine does not start 6.40 and 7.0.pdf
    Note 943602 - Analysis of errors within the startup of J2EE Engine 7.0.pdf
    Also, your regional settings should all be set to English and United States, and English also for non-Unicode programs as other settings (excluding location) may lead to nullpointerexceptions in Java.
    Regards,
    Gökhan

  • What is the differences between sap net weaver and ecc?.

    Hello Guys,
         I am new to SAP technology(SAP-ABAP). I got confused between two sap software's SAP-Netweaver and SAP-ecc. Is this both are same are different. if different which one i can use to develop my ABAP Applications?. Please suggest me...
                                                                                    Thank you  

    Hi Kumar,
      Before 2004's
                     SAP Versions:
                      1)4.6C
                      2)4.7EE (BASIS+ICM=WAS).
                                   Note:From 4.7EE onwards WAS is introduced.
                                  There are two types of versions in 4.7EE,
                                                    WAS 610 and WAS 620
       From 2004's
                      From 2004 onwards SAP Introduced ERP Technologies.. and also called  as Netweaver Technologies...From here Java stack came into Picture,and SAP access through web also.
                      3)   My SAP ERP:
                                         a)My SAP ERP 2004:(ECC5) or (WAS 640)
                                          b)My SAP ERP 2005:(ECC6) or (WAS 720)
                                  Again in ECC6 we have different versions like:
                                            SR1,SR2,SR3,EHP1,EHP2,EHP3,EHP4,
                                                 EHP5(WAS720),EHP6(WAS720EXT),
                                                                          EHP7(WAS740)
                   Enterprize resource planning:ERP
                              To satisfy all the business terms SAP introduces ERP.
                              In ERP we have different packages like SRM, CRM, ECC, NW, SCM
                       Enterprize central Component:ECC
                             We have different modules like ABAP, FI, HR, MM, CO...
       In ECC we can use what are the modules present in it..Other than we cannot do any thing..
       But in Netweaver we can install ECC  as backend System and on that we can install  EP, PI , 
        BW and so on..
              Use of netweaver:
                       If we install EP: we can use like single sign on.
                       if we install PI: We can connect different systems SAP or NON-SAP also.
    Final Conclusion is..
                Before 2004 we called as Basis (ABAP)
                From 2004 onwards we called as Netweaver(ABAP+JAVA)....here we can install ECC and as well we can do multiple things like EP,PI and so on......because of we can acess through web also..
    Note: Hope I have explained correctly,If I am wrong please correct me..

  • Effort estimation for upgrading Sap Net weaver 7.0 to EHP2 SP6

    HI,
    We have BI 7.0 on SAP Netweaver 7.0, we want to upgrade it ot EHP2 SP6.
    Current patch level is 16 & oracle 10.2.2.0 database.
    Can anyone tell me  how much the time effort is needed.
    my customer wants an effort estimation for upgrading EHP2.
    please give me some bried idea about this acitivity.
    Regards,
    Maqsood

    > I would like to have details information with respective to time effort estimation during EHP2 upgrade process as below
    >
    > 1. initialization   -1. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 2. extraction - . what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 3. configuration -. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 4. checks - . what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 5. preprocessing -. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 6. dowtime -. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available). In general how much downtime system takes during this phase.
    > 7. postprocessing -. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    > 8. Finalization -. what system dos in this phase - 2. how much time system takes - 3. impact on server ( like availabel or not available)
    Nobody can tell you any time values. This depends on the used hardware, the speed of the underlying I/O subsystem, the number of processes you use, the speed of the server, number of languages etc. etc.
    1 - 5 is done online, nobody will notice because all the work is done in a shadow instance .Downtime says it all and 7 and 8 are postprocessing work.
    To try that do a copy of the production to a sandbox and play with the values and see yourself how much time you need.
    Markus

  • User mapping issue using SAP net weaver developer studio

    Dear All,
    I am getting below error when updating user mapping in SAP Enterprise Portal. I was able to update the data through SAP portal but not through the below code.
    Code:
    userMapData.setSystemAlias(“WebEx”);
    mappingData.put(UmeConstants.USERNAME, "user id");
                                                                   mappingData.put(UmeConstants.PASSWORD, "pasword");
    if (!userMapData.setMappingData(newUser, mappingData,logger)) {
    errorMessage = new ErrorMessage("Set user maaping data for + " + newUser.getDisplayName() + " failed.", "ApolloUMECreateUser.setUserMappingData()");
    public boolean setMappingData(IUser iUser, Map logonData, UmeLog logger) {
            //logonData needs to be able to be null to clear the user mapping!
            if (iUser != null) { 
                try {
                      IUserMappingData mappingData = iUserMapping.getUserMappingData(systemAlias, iUser, logonData);
                    //IUserMappingService iums = (IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
                    //IUserMappingData mappingData = iums.getMappingData (systemAlias, iUser);
                    mappingData.storeLogonData(logonData);
                            return true;
                catch (IOException ioe) {
    return false;
                catch (Exception e) {
                            return false;
            return false;
    Error:
    #1.5#00155D007802007D0000417100000B480004F636722D1228#1396613610296#com.sap.security.core.umap.imp.UserMappingDataImp#ibm.com/ibm.com.tivoli.im.umeagent#com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonDataInternal(Map, boolean)#Guest#0##n/a##88b1fdb2bbf211e3a6ac00000032f136#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Java###Cannot save logon data for principal {0} because there is no mapped backend user ID in the logon data map to save.#1#"user id, password" (unique ID: "USER.PRIVATE_DATASOURCE.un:aujastest31")#
    #1.5#00155D00780200740000411600000B480004F636722D12D8#1396613610296#System.err#ibm.com/ibm.com.tivoli.im.****umeagent#System.err#Guest#0##n/a##88cc4ee9bbf211e3b0a300000032f136#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Plain###Apr 4, 2014 5:43:30 PM com.ibm.tim.agents.UmeAgent [SAPEngine_Application_Thread[impl:3]_33] Info: Created the Writer
    #1.5#00155D007802007D0000417200000B480004F636722D18DA#1396613610296#com.sap.security.core.umap.imp.UserMappingDataImp#ibm.com/ibm.com.tivoli.im.umeagent#com.sap.security.core.umap.imp.UserMappingDataImp#Guest#0##n/a##88b1fdb2bbf211e3a6ac00000032f136#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Java###storeLogonData(Map)
    [EXCEPTION]
    {0}#1#com.sap.security.api.UMException: Mapped backend user ID not specified.
          at com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonDataInternal(UserMappingDataImp.java:280)
          at com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonData(UserMappingDataImp.java:251)
          at com.sap.security.core.umap.imp.UserMappingDataImp.storeLogonData(UserMappingDataImp.java:223)
          at com.ibm.tivoli.integration.im.agents.umeagent.sap.usermapping.UserMapData.setMappingData(UserMapData.java:106)
          at com.ibm.tivoli.integration.im.agents.umeagent.sap.UMECreateUser.setUserMappingData(UMECreateUser.java:381)
          at com.ibm.tivoli.integration.im.agents.umeagent.sap.UMECreateUser.UMECreateSAPUser(UMECreateUser.java:118)
          at com.ibm.tim.agents.UmeAgent.UMEProcessAddRequest(UmeAgent.java:207)
          at com.ibm.tim.agents.UmeAgent.processRequest(UmeAgent.java:134)
          at com.ibm.tim.agents.UmeAgent.doPost(UmeAgent.java:89)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
          at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
          at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
          at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
          at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
          at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
          at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
          at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
          at java.security.AccessController.doPrivileged(Native Method)
          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Thanks Rodrigo for you reply.
    In Data Base user is exist and manually user mapping is working only through code i am getting error. Using code user is creating but mapping is not happening. I am sending ep6User user as iUser please find requested code.
    Please suggest Thanks in advanced!!!
    public UmeUser processRequest(com.ibm.dsml2.parser.AddRequest addRequest) {
            UmeUser ep6User = null;
            try {
                Enumeration enumAddRequestAttr = addRequest.enumerateAttr();
                Properties userAttributes = new Properties();
                while (enumAddRequestAttr.hasMoreElements()) {
                    com.ibm.dsml2.parser.Attr attr = (com.ibm.dsml2.parser.Attr) enumAddRequestAttr.nextElement();
                   if (attr.getValueCount() == 1) {
                        userAttributes.put(attr.getName(), getAttributeValue(attr));
                    else {
                        List list = new ArrayList(attr.getValueCount());
                        for (int i = 0; i < attr.getValueCount(); i++) {
                            list.add(getAttributeValue(attr, i));
                        userAttributes.put(attr.getName(), list);
                ep6User = new UmeUser(userAttributes, logger);
            catch (Exception e) {
                logger.log(this.getClass().getName(), e);
            return ep6User;

Maybe you are looking for