Sap Netweaver 4.0 testdrive on linux - impossible to connect from sapgui
Hi guys,
i've just finished to install the NW40 testdrive on a linux box, based on Redhat 9.0 distro (as requested by the equirements). At the end of installation, i have two boxes
One box with winxp sp1 called Darkstar with i.p. 192.168.100.1 and Subnet mask 255.255.0.0
The second box (with linux and NW40) called Darkmoon (prob. i was too bored to think a completly different name ) with i.p. 192.168.100.15 and subnet mask 255.255.0.0
The /etc/hosts file of the linux box contain these entries :
127.0.0.1 Darkmoon
192.168.100.15 Darkmoon.locadomain.ext
195.155.155.1 nw4host
The last line was taked from other posts found in SDN forum. I followed all the install steps and the db and the instances going-up very well, without any problem.
If i ping the two boxes, they reply each-others (from winxp to linux and vice-versa).
The "hostname" command in the linux box, return only "Darkmoon" as request by installation steps.
Now the problem.
On the winxp box i have installed sapgui 6.20. In it, I've created an entry with these information:
Description : Linux box
Application server : 192.168.100.15
System number : 00
When i try to connect with double clink on that entry, i have the following error :
Partner not reached (host 192.168.100.15, service sapdp00)
Component NI (Network interface)
Release 6.20
Ver 36
Return code -10
System call SO_ERROR
Error text : WSACONNREFUSED
Seems the boxes don't see between them.
Could be a hosts file problem on linux box???
Someone of u could give me some help ??
Could be very unhappy couln't use NW40 just for a little error.
Thx a lot for all your hints and suggestions
Andrea
Hi Gregor,
thx a lot for your interest in my problem.
The firts answer is yes, i've started the instance with the command "startsap", and the instance comes up.
I can see the processed with ps -ef .
Here the log of ifconfig :
eth0 Link encap:Ethernet HWaddr 00:0C:29:5E:D9:84
inet addr:192.168.100.15 Bcast:192.168.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4525 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:336907 (329.0 Kb) TX bytes:168 (168.0 b)
Interrupt:10 Base address:0x1080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
Another thing .
The command traceroute in each box works, and shows the right path.
Thx a lot for every information u would give me .
Andrea
Similar Messages
-
License key for "SAP NetWeaver 2004 - Trial Version on Linux"
I want to evaluate the software u201E SAP NetWeaver 2004 - Trial Version on Linuxu201C and i need a license-key for test drive.
Unfortunately I can not find a page where I can request a valid license for our test. I only find license keys for the u201E SAP NetWeaver 2004s - Trial Version on Linuxu201C.
Please can You help me?Hello
yu can download abap trail veriosn from this link
but u have to create a/c in dsn.sap.com
link is as below
https://www.sdn.sap.com/irj/sdn/nw-downloads
1)SAP NetWeaver 7.01 - ABAP Trial Version
2)SAP NetWeaver 7.0 (2004s) - Trial Version on Linux SAP Evaluation Software
3)SAP NetWeaver 2004 - Trial Version on Linux SAP Evaluation Software
that will hepl out 100 %
Regards
Jayesh -
Voting Thread for the SAP NetWeaver ABAP Developer Edition for Linux
Hi Everyone,
as Mario Herger suggested in the discussion to his Blog [New Community Developer License is available|/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available] I start the topic requesting a SAP NetWeaver ABAP Developer Edition for Linux.
Best regards
GregorI think having a pre-packaged VMWare machine running on Windows or Linux would be great as it would help a lot of the non-Basis consultants get a system up and running. Perhaps even offer it as an AMI package on AWS so that hardware is not an issue.
I'd also like to see the traditional installation packages offered as many technical consultants use the build as a process to look at installation issue and post installation configuration.
I think both the pre-built and build it from scratch approaches have an audience here on SDN and I'd like to see both being offered.
In fact I'm just looking at the new license options one of which come with the DVD's which is ideal but at a price!
Thanks,
George M-A -
SAP Netweaver 7.x Download for Linux does not work
Dear all
I would like to Setup a test lab for our Company.
I tried downloading the files from the following link:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/70f357b0-ab8b-2a10-c5a1-d8c1c1736fb8
This unfortunately does only show an error screen with a 404 error message.
Any hint where I can download the SAP Trial Version for Linux ?
Many thanksHi,
Kindly follow SCN link SAP Sneak Preview License Key Request
and in addition SCN doc
http://scn.sap.com/people/gregor.wolf/blog/2008/03/31/sap-netweaver-70--java-and-abap-trial-version-on-linux--vmware-edition--tips-tricks
Hope this might help you.
Regards,
Gaurav -
Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux
Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
Thanks,
LukeHi Sajesh,
The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
Luke
1 Overview
Purpose
This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
Platforms
You can install the SAP NetWeaver Developer Studio on:
Windows 2000
Windows XP
Web Browser
You require Internet Explorer 5.5, or higher.
Minimum Hardware Requirements
The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor. -
Is SAP NetWeaver Developer Studio 2004s Supported on Linux?
Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? If so, where is it in the PAM (Product Availability Matrix) and Linux specific installation guide(s)? Everything I can find does not talk about running and or installing SAP NetWeaver Developer Studio 2004s on Linux.
Thanks,
LukeThanks Jordan!
Luke -
Hi,
The link below describes how to run two working systems in one cloud – SAP NetWeaver ABAP and SAP PO
http://scn.sap.com/community/netweaver-administrator/blog/2014/06/09/installing-sap-netweaver-as-abap-703-sp04-trial-in-amazon-public-cloud-together-with-sap-po-731-sp-11Hi Wojciech,
in past there were more SAP NetWeaver demo systems available for linux. However with current "cloud push" SAP's strategy they do not exits anymore. What you can check at the moment is following:
Technology Preview SAP NetWeaver Gateway 2.0 - Application Server on Linux and MaxDB
cheers
m./ -
[SAP NetWeaver 2004] Can't logon in Visual Administrator
Hi community,
I can't login in Visual Administrator with SAP NetWeaver 2004 - Trial Version on Linux (NW4)
I try to logon using J2EE_ADMIN/ADMIN as login/password but when I try to connect it remains in connecting state.
In the logs I can see the following error:
Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX
User J2EE_ADMIN on SU01 transaction seems correctly configured, and has the role SAP_J2EE_ADMIN
Where do I go wrong?
Thanks, Valerio
PS I know this release is old and not supported but it's not so resource-demanding as the 2004s versionHi Valerio,
I think you dont have correct password maintained in the secure store. please try this.
1. check if j2ee_admin is locked or not in SU01.
2. if you know j2ee_admin's correct password
- go to configtool, by running /usr/sap/<SID>/DVEBMGS00/j2ee/configtool/configtool.sh
- in the secure store maintain the password of j2ee_admin in the field "admin/password/<SID>"
- set and this will ask you to restart java cluster.
- restart the java cluster by going through SMICM tcode in ABAP side. SMICM > Adminstration > J2ee cluster global > send hard shutdown > with restart.
Hope this helps.
Debasis. -
Hi mates
Just need help/feedback on SAP NetWeaver XI Bootcamp and I need to hear mostly from people who have been to the camp. Indormation from reliable sources is welcomed too.
1. What are the benifts of the bootcamp to a non-basis ABAPer?
PS: We are planning to upgrade to ECC5 from 4.6c in the near future.Hi Allen this is Fazal iam into xi from past 1 year...if u have that kind of Mat pls forward me..
Thanks & regards,
Fazal.
My mail id:[email protected],
contact no:09848591520 -
SAP Netweaver Portal Single Sign On.
Ok, I need some help!
We have a dashboard that is accessed through a SAP Netweaver Portal. The Dasboard gets it's data from a LiveOffice Crystal Reports object which when refreshed asks the user for the BOE logon credentials. The users do not want to have to Log in to the BOE for the Crystal Report to refresh, so the question is has anyone successfully managed to use some method of Single Sign On from SAP Netweaver to BOE (v3.1) for a dashboard SWF refresh?
Many thanks
[Charles|http://www.reportex.co.uk]Hi Charles,
can you share with us the configuration steps needed in the SAP Portal in order to use SSO?
Thank you.
Best regards
Victor -
Connection from SAP ERP 6 to B1i2007
Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
PeterHello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter -
Problems deploying with SDM on SAP Netweaver Testdrive on Linux
Hello,
I tried to deploy the System Analyzer (see SAP-Note 770702) for NW 04 on the SAP Netweaver Testdrive on Linux (Technology Preview SAP NetWeaver 04 - SAP Web Application Server on Linux and MaxDB).
When I try to deploy it with the RemoteGui, the GUI hangs after the step 2 ('show deployment proposals for SCAs/SDA's to be deployed'). There is no error in the logfiles.
When I try to deploy it on the command line (standalone modus), I get the following error:
>>>
Caught Exception: java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.doSubstitution(DeplParamVarSubstProcessorImpl.java:238)
at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.findSubstitution(DeplParamVarSubstProcessorImpl.java:75)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSet.<init>(CPOFSJavaFileSet.java:58)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSets.<init>(CPOFSJavaFileSets.java:41)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFactory.createNewFileSets(CPOFSJavaFactory.java:24)
at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionProcessor.<init>(FSJavaDeploymentActionProcessor.java:87)
at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionHandler.createDeploymentActionProcessor(FSJavaDeploymentActionHandler.java:25)
at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.createDeploymentActionProcessor(PhysicalDeploymentActionExecutor.java:104)
at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.createDeploymentActionProcessor(DeploymentActionImpl.java:102)
at com.sap.sdm.app.proc.deployment.states.StateRequestTargets.processEvent(StateRequestTargets.java:69)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.processStartInstallation(DeployerImpl.java:168)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:80)
at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:182)
at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
at com.sap.sdm.control.command.Command.exec(Command.java:42)
at SDM.main(SDM.java:21)
Severe (internal) error. Return code: 16
<<<
Any ideas?
Thank's a lot
PeterHi Peter,
Testdrive is a manipulated version that may miss some parts. It is definitely not intended for installing any additional SAP software nor tools on it.
Regards,
Benny -
Linux Testdrive SAP NetWeaver 7.02 on DB2 LUW now available in SAP Shop
You can find the DB6 based NW7.02 (SP09) Testdrive in www.sap.com/shop -> Knowledge Shop -> Documentation -> SAP NetWeaver -> SAP NetWeaver, material number is 50108304. Don't let yourself get fooled by the currently misleading description, 50108304 is the DB2 LUW based version. I will have that corrected. If you don't have a 64bit Linux system, you can download SLES11 VM at http://download.novell.com/Download?buildid=x1e9uCQ4074~ run the virtual machine, e. g., with VMware Player.
Have fun
ManfredHi Ulysees
Thanks for letting me know. I take care that Suse will provide the users.txt file, still a bit reluctant to post the info directly in this thread. But some colleagues did that work for me, you can check http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/40cc99a8-c0d0-2e10-4d83-c5aad873599f for an instruction. There is a detailed How-To available on this page, which hast the root user passsword on page 10.
Manfred
Edited by: Manfred Stein on Jan 16, 2012 1:25 PM
Edited by: Manfred Stein on Jan 16, 2012 1:29 PM -
Linux TestDrive SAP NetWeaver 7.02 MaxDB available in SAP Shop
We have just released a fresh version of our NetWeaver testdrive. Testdrive of NetWeaver 7.02 SPS7 is MaxDB based and can be ordered free of charge in SAP Knowledge Shop (www.sap.com/shop -> Knowledge Shop -> Documentation > SAP NetWeaver > SAP NetWeaver), material number is 50105321. A DB2 LUW version will follow within the next few weeks, we also work on a download version. We have tested with SLES10 and SLES11, RHEL6 and Ubuntu 10.10. Suse will provide a custom made SLES11 SP1 based virtual appliance with sufficient diskspace to home the testdrive. We have worked on a couple of simplifications to make the installation process even simpler than it was before.
We await your feedback
ManfredHi Manfred,
you mentioned, that SUSE would provide a custom made vmware image of SLES 11 SP1 to be used with this preview edition. Are there any news on wether and when this will be available ?
regards,
Jakob -
Error while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I am getting problen while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I need to install SAP Web Application Server 6.4 ,SAP NetWeaver Developer Studio,MAXDB7.5 in Fedora Core
The package sapj2ee-srv-sapdb-6.40-2 is already installed.
The package sapdb-7.5-2 is already installed.
The package sapdb-db-log-7.5-2 is already installed.
The package sapdb-db-files-7.5-2 is already installed.
Found interface: eth8 . Alias is eth8:0
ifconfig eth8:0 195.155.155.1 up
LD_LIBRARY_PATH: Undefined variable.
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/sapdb/programs/bin/xuser: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
[: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Can u suggest what I need to do ? do I have to install any rpmHi Debashis Mallick,
it seems the program xuser need the libraries libdl.so.2 and libc.so.6 and don't find it.
Both are in package glibc-2.6.x. ,maybe your have Version < 2.6 installed?
Regards
Andreas Filzer
Maybe you are looking for
-
Windows 7 partition not showing up
Hi, I have a fairly standard 10.6 + Bootcamp Win XP setup. I wanted to test Windows 7 64 bit, so I just made an extra NTFS partition, booted from the windows7 DVD, the installer recognized the new ntfs partition and installed without a hitch. But I c
-
What I do?
-
Need to wipe hard drive, don't wan't to lose adobe package..
My mac has slowed up completely as it has too much junk etc. on there... I have photshop etc installed with my adobe ID, if I wipe the hard drive to clean it up it'll delete my software, can I just re-download it as I have my ID online?
-
How to set output of a jsp page in a textarea??
hi i am working on a mail application and i wish to set the output of a jsp page into the textarea. working is similar as we forward a mail the mail get appended in the textarea of the compose page. how to achieve this plz. help... i got stuck at thi
-
How to identify objects created by registering xml schema
Hi Everyone, We are using Oracle 9i Rel2. I have registered an XML schema and I saw that there were several objects created for it table ,some types and a trigger . For some build purposes I want to exclude all of these objects which are associated w