SAP NetWeaver 7.0 Trial Hardware key
Hi,
I installed the SAP NetWeaver 7.0 ABAP Trial Version, i used it, but my logon is expired. I would like to request a new license key, but i have a little problem. I don't know my Hardware key /or Hardware ID/. The question is: How can i get my Hardware key????
Thanks
Hi,
I have a seem problem, I did installed the trial software and I did get a key from SAP, but it is nearing to expired. I am trying to get another key, but it have a different serial number, for this cause, the system can not upload the license.
Exists any wayt to replace it or how I can get another licensekey to continue in my SAP system?
Note: my license says 'perm', I wanna understand that is a permanent license?
Thanks for your help.
Regards,
Nicolás.
Similar Messages
-
Install License Key for SAP NetWeaver 2004s ABAP trial Edition.
Hello.
I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license. I have got the "License Key" from SAP website. However, <b>the installation of the new License Key fails to complete successfully</b> (it fails to add the new license key) and ends with an error prompt. This problem is happening on both systems! <b>Has anyone experienced such problem?</b> What did you do to fix it?
Note: no errors in typing in the new Key, as I used the copy and paste!
Thank you very much for your help.
HameedRich,
Thanks again for your help. I found out that if you try to install the new license key (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. <b>It seems to me that once an error flag is set, it is not removed unless the server is restarted.</b> well, the problem is fixed now and thank you for your help.
Hameed -
SAP NetWeaver 2004s Java Trial Version installation problem
I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR . -
SAP NetWeaver 2004s Java Trial Version on Windows Vista
Hello everyone,
I have been trying to install SAP NetWeaver 2004s Java Trial Version for three days now on Windows Vista Ultimate. Since Microsoft has a new security infrastructure implemented in Windows Vista, it is not that easy to install SAP NetWeaver 2004s Java Trial Version. Windows Vista has some sort of User-account security. In summary, in Windows Vista, you are logged in as an administrator, but when it comes to change system files or do registry entries, you or respectivly third party programs (e.g. SAP NetWeaver 2004s Java Trial Version installer) has no rights to do things like registry entries. There is a possibility to rightclick on the setup.bat file and start it in administrative mode, but that doesn't change a thing.
I hope you guys get my problem.
This is the error log:
WARNING 2007-01-28 21:09:35
Error 5 (acces denied
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\DPS).
WARNING 2007-01-28 21:09:35
The Subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2007-01-28 21:09:35
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2007-01-28 21:09:35
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please help!
yours
erikWindows Vista isn't on the support matrix of SAP Netweaver 2004s!
you may play arround with regedit and chaning the security settings of SYSTEM\CurrentControlSet\Services\DPS key. SAPinst is doing a KEY_ALL_ACCESS when enumerating the services registry.
Starting with Vista some registry values have special protection which do not allow administrators to open them with KEY_ALL_ACCESS.
peter -
SAP NetWeaver 2004s Java Trial Version Installation error
Dear Techies,
I tried to install the trial version (SAP NetWeaver 2004s Java Trial Version
) downloaded from SDN, but I am getting an error immediately after started the installation. The log as given below.
Please suggest me where I can delete this special character mentioned in the log file ? The full log also is given below
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
Thanks and best regards,
Shiju
Full log :
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\Program Files\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\instgui.jar;C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Netweaver_FullKit\SAPNW2004sJavaSP9_Trial\SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host MythiliKannan, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml'.
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml'.
INFO 2007-04-13 21:55:09
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-04-13 21:55:16 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml'.
INFO 2007-04-13 21:55:16
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
ERROR 2007-04-13 21:55:17
CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: Bad path component: "C:.
ERROR 2007-04-13 21:55:17
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2007-04-13 22:00:30 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
Exit status of child: 1Hi,
I changed the system name but still I am getting the same error. Previously there was an SAP system was installed in my pc later I uninstalled that, but still there are two SAPsid_00 and SAPsid_01 (where in sid is MS) is running. I think this is the problem. I disabled the services as well but still I am getting the same error during the installation. How to delete the windows services ? and how to do a clean up for registry ?. I feel if I do theses two then I can install.
Thans a lot for your helps and support.
Shiju -
Error:sap netweaver 7.1 trial version installation
Hello all i am installing sap netweaver 7.1 trial version during installation i am facing this error .
i am using windows 2003 server Please help me.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\suxfvih' does not exist on the 'localhost' host.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.Hi,
Could you provide the resolution. Having the same issue.
Thanks,
kajal -
SAP NetWeaver 2004s ABAP Trial Version - error code = 200
Hi all,
installation of SAP NetWeaver 2004s ABAP Trial Version
which was attached to the book ABAP-Objects ends again and again with
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
Attached you find information about
1) Host-file
2) Network connections
4) Error - Log
It seems that the [# [#]
echo 7/tcp
echo 7/udp
discard
9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
#Active users
systat 11/tcp users #Active users
daytime 13/tcp
daytime
13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote
#Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen
4) == E R R OR L O G ================================================
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
an error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:07:15 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Jan 1, 2007 1:12:17 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err,
An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Jan 1, 2007 1:12:17 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err,
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source
== Remark to threads ========================
Thread a)
"I found it is very useful to have a clean system" => not applicable to me
Thread b)
deals with removing relics of previous installations => hints considered but error still appears
Thread c)
not applicable to meHi all
I've read your entrys.
Saw that the solution is missing.
It can be found in the manuals:
1. Download the "Registry Clean Tool for SAP NetWeaver 2004s ABAP" and use it.
2. Download the latest Version of "SAP NetWeaver 2004s ABAP" and un-rar it.
3. Install the "Microsoft Loopback Adapter" an activate it.
4. Retry to install.
Summary:
So the error 200 was caused for the first time from trying an installation without a Loopback Adapter, and after that from trying to re-install without cleaning the registry.
Now its working fine.
Thomas -
Error during installation of SAP NetWeaver 2004s Abap Trial Version
The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript. -
Modules in SAP Netweaver 7.2 Trial.
Hi everybody,
Hope you are all fine.
I m new in this forum and new in SAP technology and development.
Recently, I install the SAP Netweaver 7.2 Trial in order to start to develop with ABAP.
But, the problem is I donu2019t find the RH modules and some others modules too. In the program that I want to develop I should call some tables which belong to the RH module;
Son, my questions are:
Can I get all SAP modules in SAP Netweaver 7.2 Trial ?
Will I get problems on my programs when I call a RHu2019s table ?
On the other hand, I donu2019t find to the transaction BD10? why ?
Thanks for helping me!Hi everybody,
Hope you are all fine.
I m new in this forum and new in SAP technology and development.
Recently, I install the SAP Netweaver 7.2 Trial in order to start to develop with ABAP.
But, the problem is I donu2019t find the RH modules and some others modules too. In the program that I want to develop I should call some tables which belong to the RH module;
Son, my questions are:
Can I get all SAP modules in SAP Netweaver 7.2 Trial ?
Will I get problems on my programs when I call a RHu2019s table ?
On the other hand, I donu2019t find to the transaction BD10? why ?
Thanks for helping me! -
SAP NetWeaver 7 Abap Trial Version - License
Hi,
We tried the link: http://www.sap.com/minisap to get the license for the SAP NetWeaver 7 Abap Trial Version but the page does not exist.
Is there a new link to get the license for the trial version?
Thanks,
ChrisHi CHRIS
The curriculum I am referring to can be found in collaborative workspace.
APPLICATION PROGRAMMING TECHNIQUES ABAP
Course Author(s): Brendan McCarthy and Stephen Paull (Victoria University)
Course Description:
This unit is taught over one semester (36 hours) and introduces SAPu2019s programming language ABAP with a focus on Report Programming.
On completion of this unit, students should be able to:
u2022 appreciate the advantages and disadvantages of using a commercial programming language to solve common business problems;
u2022 write programs to process the data necessary to produce reports;
u2022 write programs to use internal tables;
u2022 write programs that organise and process files;
u2022 demonstrate knowledge of the structure and use of files;
u2022 use a mini or mainframe computer system in a multi-user programming environment, and appreciate the advantages and difficulties of such an environment;
u2022 use structured programming techniques to produce solutions to a range of business problems;
u2022 design and document programs using techniques such as Structure Charts and Pseudocode.
The curriculum includes lecture material, workshops, tests, assignments and examinations.
The flight reservation data set is available in the IDES client. The link below provides access to PC based version of ABAP and the relevant data set.
good luck
PAUL HAWKING -
GUI error on SE80 in SAP NetWeaver 2004s ABAP trial Edition
I have SAP NetWeaver 2004s ABAP trial Edition installed on WinXP. one problem is that when I run T-code SE80 (Object Navigator) the middle section of the left part of the screen (where it would normally allows you to select object type for display) is not painted. it is just a block of white space! Other parts of the screen seems to work fine (both Top and Bottom sections). Has anyone had such problem? What can I do to fix it? Thank you for your help
HameedPatch level 22 is available at service market place, this is the link
Service Market Place -> Support Packages and Patches -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 6.40 -> Win32 -> gui640_pdb_22-10001615.exe
https://smpdl.sap-ag.de/~swdc/012002523100007929292006D/gui640_pdb_22-10001615.exe?_ACTION=DL_DIRECT
You need the Service Market Place Id for that.
However, this file did not help!
Hameed -
Download SAP NetWeaver 2004 Java Trial Version for Windows
Hi there,
I'm currently working on a project where I need to develop with EP 6.0. For testing my development I wanted to download the SAP NetWeaver 2004 Java Trial Version from
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d058ab2c-e206-2a10-47b7-c05df8a3ae76]
But the files doesn't seem to exist on the server anymore. Has anyone an idea where to find these download files?
Thanks,
David.Hi Parsman,
You only need SAPGui to logon to ABAP instance...
If you installed a Java Instance.. you need to logon using your browser... URL is in the manual.
For the J2EE engine page,
http://<hostname_with_fqdn>:500<instance_number>
If there a portal installed,
http://<hostname_with_fqdn>:500<instance_number>/irj/portal
All this info is contained in the installation guide.
Regards
Juan -
SAP NetWeaver 7.0 Trial archive can't be extracted
Hello everyone,
I'd like to try the SAP NetWeaver 7.0 Trial (ABAP, or JAVA)
I downloaded them but WinRar gave an error while extracting because my archive was corrupted.
So when I wanted to install it, it gave a java error (Error in main).
Does anyone have an idea?
Thank you for your helpHi ,
I had the same problem while installing the SAP NetWeaver 7.0 Trial.For this I dowloaded WinRAR and extracted the zipped file.Problem was resolved and I am able to install the software properly.
However,I am not sure about java error???? I never got such such error.
Thanks You
Sameer Choudhari -
SAP NetWeaver 2004 & 2004s Trials and Previews on Windows Platform
Has anybody installed "SAP NetWeaver 2004 & 2004s Trials and Previews on Windows Platform" which is in the downloads section.
It says it supports Windows2000, & Windows XP also, but when I tried to install it on Windows XP says "prerequisite conditions not met. you need windows 2003Server or worktation etc" message. Even then I tried continuing installtion but it failed.
Also, did anyone try installing it on Windows Vista? Any luck?
Thanks,
DeepikaHi Pavan
Check this link
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/
Regards
Uday -
Problem during installing sap Netweaver abap 2007s Trial
Hello,
I hope somebody could help me:
I tried to install the 2007 on my server (Windows XP SP2). But the installation stops at 17% when installing the maxDB.(Preparing Packages for installation).There's the error log:
INSTALLER_INFO: Version = 7.6.04 Build 001-003-153-115
INSTALLER_INFO: Changelist = 000000
INSTALLER_INFO: MakeId = 000000
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = Server
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 2
CALL: SDBINST -t sapmds -f C:/sapdb/NSP/_tempLocation/sapmds.txt -p DBNAME=NSP -p SOFTWAREPATH=C:/sapdb -p INSTANCEBACKUP=C:/sapdb/NSP/_tempLocation/load/load_datasave -b
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
STDOUT:
Installation of MaxDB Software
STDOUT: *******************************
STDOUT: starting installation Tu, Aug 21, 2007 at 15:32:14
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 2
STDOUT: callers working directory: D:/NetWeaver SAPNW7.0/SAPNW7.0ABAPTrialSP12/SAPNW7.0ABAPTrialSP12/image
STDOUT: installer directory: C:/sapdb/NSP/_tempLocation
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
STDOUT: archive directory: C:/sapdb/NSP/_tempLocation
STDOUT:
debug package SDBBAS.SDB not found
debug package SDBKRN.SDB not found
debug package SDBUTL.SDB not found
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech": No such file or directory
STDERR:
One or more validation errors occured:
PARAMETER ERRORMESSAGE
========= ============
DBNAME Instance already exists
Database NSP must not exist
STDERR: installation exited abnormally at Tu, Aug 21, 2007 at 15:32:22
Any help?
Message was edited by:
Robert Karlovic
Message was edited by:
Robert KarlovicThere was an older version (2004). Unfortunately I forgot to uninstall everything properly. I already uninstalled and deleted the old system and registry keys with this regCleaning tool(and deleting regs manually including a reg of SAP DBtech).
I've read several times that you should install the sneak preview on a "fresh installed" OS, to prevent errors during the installation.
Is there any way to install the 2007s without reinstalling a new OS?
*****Update:
Problems fixed! Server installation was successfully and the server is running and reachable.
The problem was that there was some stopped services of the older trial version(that I deleted manually in the regedit).
Message was edited by:
Robert Karlovic
Maybe you are looking for
-
How to route traffic across subnets when one NIC is a hyper-V virtual switch?
Having a bit of a problem with a hyper-V environment which does not seem to route network traffic on two different subnets between each other. If it were a purely physical server with two NICs and a gateway set traffic would automatically be forwarde
-
FTP Adapter on OSB - how to specify logical directory path
I am using the ftp adapter on osb 11g (Oracle Service Bus Version: [Oracle Service Bus Server Side Dependencies 11.1 Thu Aug 19 02:10:08 PDT 2010 ] Oracle Weblogic Server Version: [WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 ]) I de
-
Cannot Store Chinese Characters In Oracle 9.2.0.7 Database
Hi, I'm having trouble localizing my Oracle 9.2.0.7 / ASP web application for our Chinese-speaking users. My Oracle 9.2.0.7 Database has NLS_NCHAR_CHARACTERSET set to AL16UTF16. I've set up a test table thus: CREATE TABLE "TBL_TEST_CH" field1
-
Hi , How can I create a new window such as the one that opens here when i click the "insert link" above, with fade out and one that looks as if it's in the same window ? Thanks.
-
Howto write SQL Developer Extensions in JDeveloper?
Hello, we want to develop an extension for SQL Developer. We want this extension to appear in the context menu at the table node. We did pretty well developing the necessary Java classes but now we have the problem to integrate our extension to the c