SAP NetWeaver 7.01 ABAP Trial Version System Requirements:

Hi,
I have downloaded the SAP NetWeaver 7.01 ABAP Trial Version
I am about to instal in my system, this system already has the SAPGUI installed.
now my question is about one ofhte system requirement
""The SAP system requires serveral ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600 and 8000. A possible entry can be excluded by using the hash symbol (#).""
_ now what will happen to my entries in the services file if i install this one ?
Reg
Dsk

Hi ,
I dont know abt this version of netweaver
But as far as mini sap goes SAP has given the previlages to work in ABAP in Mini Sap .
You can write your code develop the tables but there is no fucntional part attached to it .
Thanks
Sahil

Similar Messages

  • Install SAP NetWeaver 7.01 ABAP Trial Version

    Hi
    Can we install this ABAP trail version on Vista home premium edition or do we need enterprise.
    Thanks in advance
    Harischandra

    Hai,
    VISTA Enterprise will be better than Premium, i have seen some Installations on Premium having problems.
    For SAP NetWeaver 7.01 ABAP Trial Version System Requirements:
    Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 and Windows VISTA.
    Its better you can go with Windows server 2003 if applicable.
    Regards,
    Yoganand.V

  • Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista

    This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!!  Here is the contents of log.txt:
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\log.txt for details.
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Faisal,
    Thanks for your response to my question.  I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB.  After installing VirtualDisk I only have 38GB of free space on my hard drive.  System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB.  Why are more than 50GB required?
    If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
    Thanks for your help!
    Gary

  • How to uninstall SAP NetWeaver 7.01 ABAP Trial Version on Vista

    I can't  uninstall SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista, because installation didn't finish

    Hello
    Open the Start.html file in the SAP folders you have downloaded. You can see Uninstall instructions on right hand side and then go to c: drive and delete all the SAP folders you see and then in registry  . It is good to follow those steps to uninstall bcoz even u uninstall there will be some traces in you system
    Regards
    Anil

  • SAP Netweaver 7.01  ABAP Trial version

    Hi Gurus,
    I have installed the SAP Netweaver 7.01 ABAP trial version from SDN. I changed the settings of the Workbench Browser selection in SE80 to had checked the enhancement info system and all other checkbox.
    se80  Utilities->Settings
    I got a error saying only 8 can be selected. But by mistake i clicked on the enter and now it goes to dump.
    now whenever I execute SE 80 i get the following dump
    Error analysis                                                                       
        An exception occurred that is explained in detail below.                         
        The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not   
         caught in                                                                       
        procedure "IF_WB_LAYOUT_MANAGER~GET_NEW_WINDOW_STYLE" "(METHOD)", nor was it     
         propagated by a RAISING clause.                                                 
        Since the caller of the procedure could not have anticipated that the            
        exception would occur, the current program is terminated.                        
        The reason for the exception is:                                                 
        The dynamically specified class "CL_AMO_REPOSITORY" at CREATE OBJECT neither     
         exists as                                                                       
        local, nor as global class in the system, or is overshadowed by a local          
        data type of the same name.                                                      
    How can I revert back to the original settings for SE80? I cannot change the settings since when i give the SE80 transaction it goes to dump.
    Any help in this regard is highly appreciated.
    Thanks,
    Nilesh

    Hi,
    For Trial versions, the correct forum for this question would be
    Software Downloads
    @Moderators, please move to the "Trials, Previews & Other Downloads" forum if appropriate.
    Regards,
    Debasis.

  • SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

    Hi BI Experts,
    I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
    When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
    I appreciate all your input.
    Regards,
    OSR.

    Hi,
    Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
    If you want it in different client, you change it in BWMANDT field of RSADMINA table.
    hope it helps.
    Regards,
    Pruthvi R

  • SAP Netweaver 7.01 ABAP Trial Version not working

    Hello,
    I am trying to load SAP Netweaver 7.01 ABAP Trial Version on VISTA.  I am having two problems.
    1.  When I try to start NSP using SAP Management Console, I am prompted with a pop-up window labeled "WebService Authentication."  The first parameter for User is automatically filled with value Home-PC\RESkater.  It also asks me to enter Password.  I do not know what to enter for password.
    2.  After I installed the SAP Netweaver 7.01 ABAP Trial Version, the download instructions says that I can sign on to system via web gui using  http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000.  However, I receive the error message stating "local host is not set up to establish a connection on port 8000 with this computer."
    Can anybody give me any helpful tips that might resolve these issues for me?
    Thanks.
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:35 AM
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:36 AM

    Hi Rae,
    Regarding issue 1, you to startup NSP, you need to remove the Home-PC\ portion of the username.  So your username should only be RESkater.  Then the password should be the same as the password that you use to logon onto the operating system for user RESkater.
    Hope this helps...
    Thanks,
    Miguel

  • 64 bits/ installation of SAP NetWeaver 7.01 ABAP Trial Version on vista

    Hello All,
    I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi  to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
    does this package exist ?
    Thanks for your answers

    Hello All,
    I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi  to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
    does this package exist ?
    Thanks for your answers

  • Error Install : SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    *     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
    *     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
    *     at java.lang.reflect.Method.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
    *     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
    *     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
    *     at java.lang.Thread.run(Unknown Source)*
    Can somebody give me suggestion how to resolve my probelm.
    thanks,
    Amir
    PS : I have all the requirements system

    did u installed loopback adapter as mentioned in the installation instructions?
    Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
    does your pc have internet connection available?
    Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
    is the installation process completed?
    Yes the installation process is completed and with success (but without C:\sapdb)
    (Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
    how much time the installation taking.. usually the step of database installation and configuration takes a long time.
    Not much time because there is not database installation
    while logon to sap, what details are u giving.. the system number .. is it 00,
    When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
    which other SAP softwares are installed on ur pc.
    In each time, when I tried to install SAP, I uninstalled all SAP software
    I hope you can help me for the install
    Note : I work on Vista sp1
    Thank you for your help
    Amir

  • Error:SAP NetWeaver 7.01 ABAP Trial Version

    Hi,
    While installing SAP NetWeaver 7.01 ABAP Trial Version I am getting following error in the logfile generated.
    Kindly help if someone has encountered the same and has been able to rectify it. Looking for your immediate response.
    Regards,
    Ratna.
    (Nov 3, 2008 8:45:03 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$DiskSpaceCheck, wrn, WARNING: C:\ partition has insufficient space to install the items selected.   2972.3 MB additional space would be needed to install the selected items.
    (Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Nov 3, 2008 10:09:04 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Nov 3, 2008 10:09:04 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Hi ,
    I encountered the same Java problem, the problem occurs if your system contains JAVA components already installed. Try to remove them using add remove program from control panel and reinstall SAP.
    Regards,
    Manisha

  • Error during installation of SAP Netweaver 7.01 ABAP Trial Version

    Hello everyone,
    i tried to install 'SAP Netweaver 7.01 ABAP Trial Version' on my laptop using an VMWare Server.
    My used operating system on my VMWare Server is 'Windows Server 2003 Enterprise Edition'.
    I´ve executed within the folder D:...SAPNetWeaver701SAPNW7.01ABAPTrialimageSetup.exe
    and entered all necessary informations to start the installation.
    More or less 30mins. later i got the following message from the system:
    'An error occurred and product installation failed.  Look at the log file E:sapdbNSPlog.txt for details.'
    The log text show the following information:
    Line: -
    (Dec 25, 2009 1:53:43 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file E:sapdbNSPlog.txt for details.
    (Dec 25, 2009 1:53:43 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ADMINI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Line: -
    Can anyone help me with this??? I have no ideas how to solve this problem.
    Thank you very much.

    Check end of Logfile C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/MaxDBSAPNWPREV.log
    have you checked that log?

  • SAP NetWeaver 7.01 ABAP Trial Version on Vista Ultimate Issue

    Hi,
    I am trying to install SAP NetWeaver 7.01 ABAP Trial Version on windows vista ultimate 32 bit. when i check MaxDBSAPNWPREV.log
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: starting installation phase of package SQLDBC 77 7.7.04.23 32 bit
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: -----------------------------------------------------------------
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst:
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC77.TGZ"
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 pgm/
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x       655360 2008-07-09 04:24:09 pgm/libSDBLoader77.dll
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x      1642496 2008-07-09 04:24:03 pgm/libSQLDBC77.dll
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/fastload/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/fastload/lib/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--        23124 2008-07-09 04:24:09 sdk/fastload/lib/libSDBLoader77.lib
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/sqldbc/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/sqldbc/lib/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--       146580 2008-07-08 23:51:15 sdk/sqldbc/lib/libSQLDBC77.lib
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 symbols/
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--      4041728 2008-07-09 04:24:08 symbols/libSDBLoader77.pdb
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--      7539712 2008-07-09 04:24:02 symbols/libSQLDBC77.pdb
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: checking unpacked archive... ok
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Mar 17, 2009 at 14:00:20
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: creating database NSP...
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: ERROR: Backup check for  'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation exited abnormally  at Tu, Mar 17, 2009 at 14:00:20
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Error during call to sdbinst, rc= 1
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Done with call_sdbinst
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: rc of sdbinst = 1
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Start of CallSdbuninst
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: IndepProgPath: C:/sapdb/programs
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Calling check for db_enum in case of an abort
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: nsp doesn't exist. Nothing to do !
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: rc of Method: 3
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: IndepProgPath = C:/sapdb/programs
    MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
    MaxDB: Database instance to drop: :NSP:
    MaxDB: Instroot of NSP is: null
    MaxDB: sdbuninst_option = :3
    MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of CallSdbuninst
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of uninstallation
    What could be the issue
    as the error says File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
    i am not able to find the folder in my system.
    Regards

    Hello every body... i´m facing with the same problem and i thinank i´ve just tried everything with no success... 2 days ago i installed ABAP Trial without problems, everything works fine and yesterday i was able to login and practice a little bit. At the end of the day i run the tc SGEN to compile the system and when the jobs ended i shutdown the db and the computer.
    This morning i´m not able to stats the db, it´s impossible... i´ve just tried many things that i´ve seen in different post but the error still appears... any idea ? please help me... it´s very important for me to have the ABAP Trial working.
    System
    Windows XP Pro SP2.
    HD 100GB.
    Here is my dbm file (...the end of the file to see the error).
    My user is assigned to SDB Operators.
    If i try to start the service manually the system says that service it has been started and stopped because there is nothing to do... any idea ?
    Thanks in advance
    Joaquin Casas
    2009-04-11 12:52:24 0x00000e88 INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:52:24 (client process has process ID 3456 on computer sapquim).
    2009-04-11 12:52:24 0x00000e88 INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:52:27 0x00000e88 INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000e88 INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:52:33 0x00000e88 ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000e88 ERR          9 DBMKnl   Statement:  RESTART
                        0x00000e88 ERR         10 DBMKnl   Returncode: -902
                        0x00000e88 ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:52:33 0x00000e88 ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000e88 ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000e88 ERR     -24778 DBMSrv   -902,I/O error
                        0x00000e88 ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000e88 ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000e88 ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:52:33 0x00000e88 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3456 on computer sapquim).
    2009-04-11 12:53:02 0x00000900 INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:53:02 (client process has process ID 3368 on computer sapquim).
    2009-04-11 12:53:02 0x00000900 INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:53:05 0x00000900 INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000900 INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:53:11 0x00000900 ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000900 ERR          9 DBMKnl   Statement:  RESTART
                        0x00000900 ERR         10 DBMKnl   Returncode: -902
                        0x00000900 ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:53:11 0x00000900 ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000900 ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000900 ERR     -24778 DBMSrv   -902,I/O error
                        0x00000900 ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000900 ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000900 ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:53:11 0x00000900 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3368 on computer sapquim).
    2009-04-11 12:54:00 0x00000fec INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:54:00 (client process has process ID 3596 on computer sapquim).
    2009-04-11 12:54:00 0x00000fec INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:54:01 0x00000fec INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000fec INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:54:07 0x00000fec ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000fec ERR          9 DBMKnl   Statement:  RESTART
                        0x00000fec ERR         10 DBMKnl   Returncode: -902
                        0x00000fec ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:54:07 0x00000fec ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000fec ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000fec ERR     -24778 DBMSrv   -902,I/O error
                        0x00000fec ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000fec ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000fec ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:54:07 0x00000fec INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3596 on computer sapquim).

  • Database Error during installation of SAP NetWeaver 7.01 ABAP Trial Version

    Hi All,
    I was installing the SAP NetWeaver 7.01 ABAP Trial Version but during the installation i got some MaxDB error.
    Log.txt
    (Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file F:\sapdb\NSP\log.txt for details.
    (Apr 28, 2010 10:13:41 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/ASHISH/LOCALS1/Temp/MaxDBSAPNWPREV.log")
    at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
    at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
    at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
    at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
    at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
    at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

    Hi,
    In environment variables under system variables see if the path to java has been set,
    JAVA_Home
    C:\j2sdk1.4.2_11
    JRE_PATH
    C:\Program Files\Java\j2re1.4.2_11\bin\java.exe
    Both these variables should be set.
    The values would differ on the version of java that you are using and the
    path where you have java installed.
    I suggest you go with Java version 1.4.2_*.
    Regards,
    Vishnu

  • ABAP Exercises in SAP Netweaver 7.01 ABAP Trial Version

    Hello,
    I just finished the ABAP academy, courses TAW10 and TAW12.
    I want to do some exercises for studying to the certification test, but the exercises in the books require ABAP objects (such as tables, structures, data elements, templates and so on) that does not exist in the "SAP Netweaver 7.01 ABAP Trial Version", that I have installed.
    Is it possible to get those objects somewhere?
    PS.: My CITRIX access is not available anymore!
    Thanks and regards!

    so ... i don't understand why ... I retry to make th einstallation on the first Windows and i've always the same error but not at the same place. It stops between 33 and 35% of the installation during the check of the package ... very strange.
    Have you made the installation with the SP3 or do you using the Netweqver with that ? Becquse my problem comes during the installation. I'll try to make the upgrade of the Windows to control the good working of the system (i think there is no problem with that .... but in the doubt )
    Thanks for the information  Peerasit Jomsri

  • Installing SAP NetWeaver 7.0 ABAP Trial Version on x64 bit machine

    Hi,
    I am trying to install SAP NetWeaver 7.0 ABAP Trial Version onto my server which is running Windows Server 2003 Standard x64 (Processor is AMD Dual-Core Opteron 1210 / 1.8 GHz) however the installation fails at 17%.
    Upon reviewing the the logfile MaxDBSAPNWPREV.log its evident that the issue is due to the os being the 64 bit version. Some of the log file is as follows:
    Mon Mar 31 14:04:24 BST 2008 MaxDB sdbinst: software in package SAP Utilities is not runnable on your system
    Mon Mar 31 14:04:24 BST 2008 MaxDB sdbinst: FILE MAGIC: MS Windows 32-bit i386 executable
    Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: architecture = AMD64
    Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: subversion = Service Pack 2
    Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: system = Windows
    Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: version = NT 5.2
    Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: installation exited abnormally  at Mo, Mar 31, 2008 at 14:04:23
    Does anyone know a way round this? Is there anyway to get the installation successful on my server? The model is HP Proliant Server ML 115.
    Thanks for your time and help.
    Vish

    See other thread /message/2787330#2787330 [original link is broken]
    Edited by: Valdir Novo Sevaios Junior on Apr 12, 2008 4:46 AM

Maybe you are looking for

  • Process Controlled WF for Shopping Cart

    Hi, We have implemented process controlled workflow for shopping cart approval. 1. Created a bespoke schema for the approval process 2. Defined 5 process levels in the schema 3. changed the BRF event at the schema evaluation level. It now contains a

  • Problem With Chart (Members Name)

    Hi Experts We are facing the one new issue in FR as well as HFM. we are using the data bast to HFR is HFM.While we are creating the HFM application Profile we used the Period's Lables as January ,febuary.....,.we catching the same in HFR also it good

  • How to design Customized ALV report like normal report !

    Hello Friends,               I like to design a ALV report, with sub headers, sub totals, summary total and other summary details like percentage sale, which is not relavent to the fields displayed in the ALV. I know it is possible to get total of th

  • Enabling Buttons

    I have disabled buttons on a page using a function and want to enable them after pressing a create button on the same page. I am trying to use another function call for the enable buttons but the create button is tied to a process and branch. What is

  • My computer was zooming in and out for no reason and now it's stuck zooming in on youtube and I can't zoom it out!!

    I was watching a video on youtube and when I scrolled down to see the comments with my mouse the screen zoomed out!! when I scrolled up the screen zoomed in to much!! my screen on youtube is now stuck zoomed in to much so I can't see anything!! my mo