SAP Netweaver 7.1 - Released?
All,
I had a few questions about the SAP Netweaver 7.1. Has it been released? I am not able to locate installation files for the 7.1. If not, when is it scheduled to be released?
Also, I am so confused as to what the difference is between SAP Netweaver CE 7.1 and SAP Netweaver 7.1. Am I able to download a Netweaver web AS 7.1 with CE??
Please help.
Hi,
Files are ready for down load.
Below read below info.
SAP NetWeaver Composition Environment (CE) 7.1 Installation Support Release 5 (SR 5)
SAP NetWeaver Composition Environment (CE) 7.1
General Information
SAP NetWeaver Composition Environment is SAP's environment for creating and deploying composite applications to accelerate business process innovation. Since SAP NetWeaver Composition Environment is both a design-time and run-time environment, it enables both the creation and deployment of composite applications using the same software.
Product Availability
A list of all supported database and operating system combinations for SAP NetWeaver Compostion Environment 7.1 is available on SAP Service Marketplace at service.sap.com/pam -> Product Availability Matrix -> SAP NetWeaver -> SAP NetWeaver CE -> SAP NetWeaver CE 7.1.
Installation
The Master and Installation Guide - SAP NetWeaver Composition Environment 7.1 describes how to plan your system landscape and to perform the installation of the SAP NetWeaver CE application system and the SAP NetWeaver Developer Studio. The Master and Installation Guide are included in the shipment or the latest version can be download from sdn.sap.com/irj/sdn/ce.
The SAP NetWeaver Developer Studio can also be installed from the SAP NetWeaver Developer Studio update site. The update site can be found at https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce. To access the update site you need an SAP Service Marketplace user and password (S-user).
Notes
SAP Support Portal contains SAP Notes detailing solutions for known problems or providing additional information. You can search for and read SAP Notes on SAP Support Portal at service.sap.com/notes.
Support Package Stacks
All available and planned Support Package Stacks for SAP NetWeaver Composition Environment 7.1 can be found on SAP Service Marketplace at service.sap.com/netweaver -> SAP NetWeaver Composition Environment 7.1 - Release specific Information -> Support Package Stack Information.
Documentation Center
All available implementation and maintenance documentation for SAP NetWeaver Composition Environment can be accessed on SAP Help Portal at http://help.sap.com -> SAP NetWeaver -> SAP NetWeaver CE -> SAP NetWeaver Composition Environment 7.1.
On this page you will find links to the documentation for administrators, developers, and technology consultants.
Release Information
The Release Notes for SAP NetWeaver Composition Environment 7.1 which describe the new functions and changes to previous releases are available on SAP Help Portal at http://help.sap.com -> SAP NetWeaver -> SAP NetWeaver CE -> SAP NetWeaver Composition Environment 7.1 -> What's new - Release Notes.
For information about SAP NetWeaver Composition Environment 7.1 release restrictions, see SAP Hinweis 1004108.
Regards
Ashok
Similar Messages
-
Need help on SAP netweaver Bex Analyser Release 2004s,patch 700.
Hi BW Buddies,
Hope everyone is fine.
I just installed the SAP netweaver Bex Analyser Release 2004s,patch 700.
The look and feel of this BEx is different from that of BW 3.5 Bex.
Can anybody suggest me some good documentation about the new Bex Analyser?
Any kinda reply for this is appreciated.
Thanks in Advance
Sam MathewCheck this link:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
KJ!!! -
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.Dear Community User,
SAP NetWeaver 7.4 is optimized for SAP HANA. It enables the use of SAP HANA as the underlying database and facilitates the optimization of applications for SAP HANA. It also includes new and changed features for the Application Server ABAP, connectivity, UI technologies, Business Warehouse and security.
Bird's-eye view from SAP NetWeaver 7.4, I think it will help you to get a quick overview
Good Luck, if it will help you to get a Bird's-eye view from SAP NetWeaver 7.4 then please award the answer as useful. Thanks in advance.
Best Regards
Abubakar -
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.Dear Community User,
SAP NetWeaver 7.4 is optimized for SAP HANA. It enables the use of SAP HANA as the underlying database and facilitates the optimization of applications for SAP HANA. It also includes new and changed features for the Application Server ABAP, connectivity, UI technologies, Business Warehouse and security.
Bird's-eye view from SAP NetWeaver 7.4, I think it will help you to get a quick overview
Good Luck, if it will help you to get a Bird's-eye view from SAP NetWeaver 7.4 then please award the answer as useful. Thanks in advance.
Best Regards
Abubakar -
What's New in SAP NetWeaver 7.4 (Release Notes) - SAP Library
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.Dear Community User,
SAP NetWeaver 7.4 is optimized for SAP HANA. It enables the use of SAP HANA as the underlying database and facilitates the optimization of applications for SAP HANA. It also includes new and changed features for the Application Server ABAP, connectivity, UI technologies, Business Warehouse and security.
Bird's-eye view from SAP NetWeaver 7.4, I think it will help you to get a quick overview
Good Luck, if it will help you to get a Bird's-eye view from SAP NetWeaver 7.4 then please award the answer as useful. Thanks in advance.
Best Regards
Abubakar -
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.Dear Community User,
SAP NetWeaver 7.4 is optimized for SAP HANA. It enables the use of SAP HANA as the underlying database and facilitates the optimization of applications for SAP HANA. It also includes new and changed features for the Application Server ABAP, connectivity, UI technologies, Business Warehouse and security.
Bird's-eye view from SAP NetWeaver 7.4, I think it will help you to get a quick overview
Good Luck, if it will help you to get a Bird's-eye view from SAP NetWeaver 7.4 then please award the answer as useful. Thanks in advance.
Best Regards
Abubakar -
SAP Netweaver 7.1 Version Explanation??
Hello All,
For some reason, this thread got locked ( SAP Netweaver 7.1 - Released? ), so I'm continuing it here.
As you may have guessed, I'm still confused too. Yes, I see that there is a 7.1 CE and a 7.1 PI. I also gather from the posts in the other thread, that there isn't going to be a single, all encompassing, Netweaver 7.1.
So, could someone tell me what other 7.1 releases are coming? Also, in my particular case, do I get the 7.1 CE distribution if I want to install the SAP Enterprise Portal? Or, like Rajesh asked, is there going to be a 7.1 EP distribution?
ThanksHi Tom,
the thread was closed for a reason. The only usefull comment was made by Matt who gave you the official answer on this circumstances.
>
Tom Ratrie wrote:
> So, could someone tell me what other 7.1 releases are coming? Also, in my particular case, do I get the 7.1 CE distribution if I want to install the SAP Enterprise Portal? Or, like Rajesh asked, is there going to be a 7.1 EP distribution?
>
> Thanks
Currently there is no other 7.1 but PI, CE, and mobile. You currently cannot install a EP 7.1. Nevertheless there is a smaller version of the portal inside the CE - as it needs such.
When the next version of NetWeaver is released or what it's name will be I currently cannot comment on.
Whatever happens, you will be able to do upgrades of your NetWeaver applications to that next version.
Regards,
Benny -
Where can I find release notes about SAP Netweaver 7.0 SPS18
Dear everyone,
I'm looking fot the documents about details of SAP Netweaver 7.0 SPS18.
Before I upgrade our EP 7.0 from SPS16 to SPS18, I want to what's in SPS18.
For example, new features, what's been fixed...etc.
I can't find any information about this.
Where can I get it?
Thanks in advance
Yours Regards,
JS ParkHi,
In short, the release notes fo 7.0 SPS 18 are here: http://help.sap.com/saphelp_nw70/helpdata/en/6f/16e5d860e141ee8e76823ff3838383/frameset.htm
You can find them in the following way:
1. Go to http://help.sap.com/
2. Choose SAP NetWeaver on top, then SAP NetWeaver 7.0 (2004s) on left.
3. In the list of products in the top part of the page, choose *SAP NetWeaver 7.0 *.
4. Choose What's New - Release Notes, and then choose on right the language (the example below is for English).
5. When the help page loads in a new window/tab, choose Release Notes by NetWeaver Systems and Standalone Engines on left.
This way you can access all release notes for NW 7.0.
Hope this helps,
Rossen -
Installation of Enhancement Package 1 in SAP NetWeaver 7.0
Hello,
We have install the Enhancement Package 4 in the server ECC 6.0 with EHP3.
But, before we need install the Enhancement Package 1 in SAP NetWeaver 7.0
The actual Kernel is releae 700 level 185.
We download the kernel 701 for Windows 64 unicode with SQL, and we install in the system, when we start sap the part java don't started the process sapcpe.exe "could not be started" .
We have tried with the kernel 15 and 23 of release 701, but this don't ok.
We can connect to the part ABA and JAVA, but the Kernel isn't update, and in the console of sap the process sapcpe.exe is in red with the message could not be started"
The actual level of the server is:
SAP_ABA 700 0016 SAPKA70016
SAP_BASIS 700 0016 SAPKB70016
ST-PI 2005_1_700 0005 SAPKITLQI5
PI_BASIS 2005_1_700 0015 SAPKIPYJ7F
SAP_BW 700 0017 SAPKW70017
SAP_AP 700 0012 SAPKNA7012
SAP_HR 600 0024 SAPKE60024
SAP_APPL 603 0001 SAPKH60301
EA-IPPE 400 0012 SAPKGPID12
EA-APPL 603 0001 SAPK-60301INEAAPPL
EA-DFPS 603 0000 -
EA-FINSERV 603 0000 -
EA-GLTRADE 603 0000 -
EA-HR 603 0000 -
EA-PS 603 0001 SAPK-60301INEAPS
EA-RETAIL 603 0000 -
FINBASIS 603 0001 SAPK-60301INFINBASIS
ECC-DIMP 603 0000 -
ERECRUIT 603 0001 SAPK-60301INERECRUIT
FI-CA 603 0000 -
FI-CAX 603 0000 -
INSURANCE 603 0000 -
IS-CWM 603 0000 -
IS-H 603 0000 -
IS-M 603 0000 -
IS-OIL 603 0000 -
IS-PS-CA 603 0000 -
IS-UT 603 0000 -
LSOFE 603 0000 -
SEM-BW 603 0001 SAPK-60301INSEMBW
BP-INSTASS 600V6 0000 -
BP-ERP05 603V4 0000 -
Can you help us with the error?
Kind RegardsHello,
Because when we import the packages of ECC 6.0 EPH4, the system return the error:
"OCS package SAPK-701DHINSAPBASIS requires at least Kernel Release 701 with patch number
0000"
And the package SAPK-701DHINSAPBASIS is a prerequisite for import the package with the release 604 (ehp4).
The package that we need import is:
sap basis 701
sap aba 701
pi basis 701
sap bw 701
sap bs fnd 701
webcuif 700
sap appl 604
sap hr 604
ea appl 604
ea dfps 604
ea finserv 604
ea gltrade 604
ea hr 604
ea ps 604
ea retail 604
finbasis 604
erecruit 604
lsofe 604
sem bw 604
The package are the prerequisites for import the EHP4 in the system.
Kind Regards -
Problem in Installation of SAP Netweaver CE 7.1 SP3
Hi,
I am trying to install SAP Netweaver CE 7.1 SP3 on Windows XP Professional. All the steps are executed sucessfully till Step 26 where it gives an error when it tries to
"Creating SAP start service of instance CE1 SCS01"
It says that the "Service didn't come up in 40 seconds" and if you retry the installation is terminated in 1 min with the error :
Selfextractor error
iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.2620.1195815840
In the SAP MMC only one server can be seen with the processes;
msg_server.exe
enserver.exe
gwrd.exe
All these processes are running in green.
Please reply ASAP.
The last part of the sapinstdev_log is :
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1
\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </p> </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from guiHi All,
I faced the same problem on WinXP Pro SP2, SP3 and on Win2k3Server although all the installation requirements are fulfilled. I have the same problem with SP5 downloaded from SDN which was released recently.
I could install successfully SP1(Trial Version) from a DVD that came with the book "Developer's Guide to SAP NetWeaver Composite Environment". This was packaged using "Install Anywhere".
So, I think it is a problem with SAPInst. Could anyone help to solve this problem?
Your suggestion is highly appreciated.
Thanks & Regards - Tarini P Mohanty -
SAP NetWeaver 7.01 ABAP Trial Version on Vista Ultimate Issue
Hi,
I am trying to install SAP NetWeaver 7.01 ABAP Trial Version on windows vista ultimate 32 bit. when i check MaxDBSAPNWPREV.log
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: starting installation phase of package SQLDBC 77 7.7.04.23 32 bit
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: -----------------------------------------------------------------
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst:
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC77.TGZ"
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 pgm/
Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x 655360 2008-07-09 04:24:09 pgm/libSDBLoader77.dll
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x 1642496 2008-07-09 04:24:03 pgm/libSQLDBC77.dll
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 sdk/
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 sdk/fastload/
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 sdk/fastload/lib/
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r-- 23124 2008-07-09 04:24:09 sdk/fastload/lib/libSDBLoader77.lib
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 sdk/sqldbc/
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 sdk/sqldbc/lib/
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r-- 146580 2008-07-08 23:51:15 sdk/sqldbc/lib/libSQLDBC77.lib
Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x 0 2008-07-09 06:04:44 symbols/
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r-- 4041728 2008-07-09 04:24:08 symbols/libSDBLoader77.pdb
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r-- 7539712 2008-07-09 04:24:02 symbols/libSQLDBC77.pdb
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: checking unpacked archive... ok
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Mar 17, 2009 at 14:00:20
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: creating database NSP...
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation exited abnormally at Tu, Mar 17, 2009 at 14:00:20
Tue Mar 17 08:30:22 GMT 2009 MaxDB: Error during call to sdbinst, rc= 1
Tue Mar 17 08:30:22 GMT 2009 MaxDB: Done with call_sdbinst
Tue Mar 17 08:30:22 GMT 2009 MaxDB: rc of sdbinst = 1
Tue Mar 17 08:30:22 GMT 2009 MaxDB: Start of CallSdbuninst
Tue Mar 17 08:30:22 GMT 2009 MaxDB: IndepProgPath: C:/sapdb/programs
Tue Mar 17 08:30:22 GMT 2009 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue Mar 17 08:30:22 GMT 2009 MaxDB: Calling check for db_enum in case of an abort
Tue Mar 17 08:30:25 GMT 2009 MaxDB: nsp doesn't exist. Nothing to do !
Tue Mar 17 08:30:25 GMT 2009 MaxDB: rc of Method: 3
Tue Mar 17 08:30:25 GMT 2009 MaxDB: IndepProgPath = C:/sapdb/programs
MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of CallSdbuninst
Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of uninstallation
What could be the issue
as the error says File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
i am not able to find the folder in my system.
RegardsHello every body... i´m facing with the same problem and i thinank i´ve just tried everything with no success... 2 days ago i installed ABAP Trial without problems, everything works fine and yesterday i was able to login and practice a little bit. At the end of the day i run the tc SGEN to compile the system and when the jobs ended i shutdown the db and the computer.
This morning i´m not able to stats the db, it´s impossible... i´ve just tried many things that i´ve seen in different post but the error still appears... any idea ? please help me... it´s very important for me to have the ABAP Trial working.
System
Windows XP Pro SP2.
HD 100GB.
Here is my dbm file (...the end of the file to see the error).
My user is assigned to SDB Operators.
If i try to start the service manually the system says that service it has been started and stopped because there is nothing to do... any idea ?
Thanks in advance
Joaquin Casas
2009-04-11 12:52:24 0x00000e88 INF 1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:52:24 (client process has process ID 3456 on computer sapquim).
2009-04-11 12:52:24 0x00000e88 INF 283 DBMSrv Command 'db_online' is being executed.
2009-04-11 12:52:27 0x00000e88 INF 1 DBMKnl Sending an administrative statement to the database
0x00000e88 INF 8 DBMKnl Statement: RESTART
2009-04-11 12:52:33 0x00000e88 ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00000e88 ERR 9 DBMKnl Statement: RESTART
0x00000e88 ERR 10 DBMKnl Returncode: -902
0x00000e88 ERR 5 DBMKnl Errortext: I/O error
2009-04-11 12:52:33 0x00000e88 ERR -24580 DBMSrv ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
0x00000e88 ERR -24988 DBMSrv ERR_SQL: SQL error
0x00000e88 ERR -24778 DBMSrv -902,I/O error
0x00000e88 ERR -24778 DBMSrv 3,Database state: OFFLINE
0x00000e88 ERR -24778 DBMSrv Internal errorcode, Error code 9050 "disk_not_accessible"
0x00000e88 ERR -24778 DBMSrv 20017,RestartFilesystem failed with 'I/O error'
2009-04-11 12:52:33 0x00000e88 INF 2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3456 on computer sapquim).
2009-04-11 12:53:02 0x00000900 INF 1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:53:02 (client process has process ID 3368 on computer sapquim).
2009-04-11 12:53:02 0x00000900 INF 283 DBMSrv Command 'db_online' is being executed.
2009-04-11 12:53:05 0x00000900 INF 1 DBMKnl Sending an administrative statement to the database
0x00000900 INF 8 DBMKnl Statement: RESTART
2009-04-11 12:53:11 0x00000900 ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00000900 ERR 9 DBMKnl Statement: RESTART
0x00000900 ERR 10 DBMKnl Returncode: -902
0x00000900 ERR 5 DBMKnl Errortext: I/O error
2009-04-11 12:53:11 0x00000900 ERR -24580 DBMSrv ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
0x00000900 ERR -24988 DBMSrv ERR_SQL: SQL error
0x00000900 ERR -24778 DBMSrv -902,I/O error
0x00000900 ERR -24778 DBMSrv 3,Database state: OFFLINE
0x00000900 ERR -24778 DBMSrv Internal errorcode, Error code 9050 "disk_not_accessible"
0x00000900 ERR -24778 DBMSrv 20017,RestartFilesystem failed with 'I/O error'
2009-04-11 12:53:11 0x00000900 INF 2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3368 on computer sapquim).
2009-04-11 12:54:00 0x00000fec INF 1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:54:00 (client process has process ID 3596 on computer sapquim).
2009-04-11 12:54:00 0x00000fec INF 283 DBMSrv Command 'db_online' is being executed.
2009-04-11 12:54:01 0x00000fec INF 1 DBMKnl Sending an administrative statement to the database
0x00000fec INF 8 DBMKnl Statement: RESTART
2009-04-11 12:54:07 0x00000fec ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00000fec ERR 9 DBMKnl Statement: RESTART
0x00000fec ERR 10 DBMKnl Returncode: -902
0x00000fec ERR 5 DBMKnl Errortext: I/O error
2009-04-11 12:54:07 0x00000fec ERR -24580 DBMSrv ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
0x00000fec ERR -24988 DBMSrv ERR_SQL: SQL error
0x00000fec ERR -24778 DBMSrv -902,I/O error
0x00000fec ERR -24778 DBMSrv 3,Database state: OFFLINE
0x00000fec ERR -24778 DBMSrv Internal errorcode, Error code 9050 "disk_not_accessible"
0x00000fec ERR -24778 DBMSrv 20017,RestartFilesystem failed with 'I/O error'
2009-04-11 12:54:07 0x00000fec INF 2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3596 on computer sapquim). -
BEX Front end issues in sap netweaver 2004s
We have problems with accessing SAP NETWEAVER 2004S BEX tools(BI7.0).
We have the following softwares installed:
SAP_BW SAP NETWEAVER BI7.0 SP 10(SAPKW70010)
SAPGUI6.40 PATCH LEVEL 22
Microsoft office 2003
.NET version 1.1
Microsoft VJ# 1.1 Distributable package
We are having the following issues in each components:
1.BEX ANALYZER:Unable to open the reports.Getting the error message that
"Critical error occured.Program needs to be closed.Refer the trace file"
2.Report Designer:component Bex Report Designer avilable verion 59, Version 132 required.Before you can continue you have to run the front-end setup"
3.BEX WAD:Unable to save any web templates.Getting the following error message.
"E002 Error While Executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1()"
In BI front end check tool for PC not showing any red files.But it showing Blue color for some of the microsoft dll's.
Please help us with your inputs..
thanks in advance
SoujanyaHi Soujanya,
This is known issue in BEx tools in this latest release.
We got the same problem and still facing.
We are using BEx 3.5X to access all reports.
Install BEx 3.5 too. Then you get two sub menus to access BEX tools.
Make sure that you open reports in 3.5 BEx Analyser.
I think all reports, which you tried to open in BEx(BI 7.0) are corrupted. try to copy to your datatargets/install (if they are BI Content Reports).
Good Luck,
Anand.
Pls give points if this is useful -
SAP Netweaver 7.0 installation - serious issue (startsap db n4sadm)
Hi,
We are trying to setup SAP Netweaver 7.0 (Test Drive x-86 edition) on Fedora 12. We have successfully ran the "install.sh" file. The DB2 instance gets installed and we are able to start it as 'db2n4s' user using the 'db2start' command (we could as well stop using db2stop).
But, we are facing issues when we start the db2 instance as prescribed by the SAP Netweaver installation guide for the following command.
n4shost:n4sadm 52> startsap db n4shost
Checking db6 db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
expand: write error: Broken pipe
expand: write error
* This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host pwc01 started
Running /usr/sap/N4S/SYS/exe/run/startdb
SQL1042C An unexpected system error occurred. SQLSTATE=58004
Activate database failed
R3trans connect failed
DB startup failed
Details of our DB2 instance
[db2n4s@]$ ./db2licm -l
Product name: "DB2 Enterprise Server Edition"
License type: "CPU"
Expiry date: "Permanent"
Product identifier: "db2ese"
Version information: "9.1"
Annotation: "-3;(_c)"
Features:
DB2 Database Partitioning: "Licensed"
DB2 Performance Optimization ESE: "Not licensed"
DB2 Storage Optimization: "Licensed"
DB2 Advanced Access Control: "Not licensed"
DB2 Geodetic Data Management: "Not licensed"
Homogeneous Federation for DB2: "Licensed"
DB2 Pure XML ESE: "Not licensed"
Thanks,
SriramThanks for your quick reply.
I actually went ahead one step in the problem. Now i am getting the following message when i try to start the sap.
n4shost:n4sadm 55> startsap db n4shost
Warning: Could not found virtuell host in ifconfig list
Checking db6 db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
expand: write error: Broken pipe
expand: write error
* This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host pwc01 started
Running /usr/sap/N4S/SYS/exe/run/startdb
11/10/2010 14:17:12 0 0 SQL1063N DB2START processing was successful.
SQL1063N DB2START processing was successful.
Database activated
R3trans connect failed
DB startup failed
Also i did the R3trans -d and have attached the log.
4 ETW000 R3trans version 6.14 (release 700 - 11.04.07 - 14:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.11.2010 - 14:19:38
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Nov 10 14:19:38 2010 83 0.000083
4 ETW000 [dev trc ,00000] db_con_init called 21 0.000104
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 29 0.000133
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 35 0.000168
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/N4S/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 191 0.000359
4 ETW000 [dev trc ,00000] Library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 21 0.000380
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 27 0.000407
4 ETW000 [dev trc ,00000] Version of '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.107)
4 ETW000 85 0.000492
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 24 0.000516
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
4 ETW000 27 0.000543
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.000561
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 27 0.000588
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 20 0.000608
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 21 0.000629
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 25 0.000654
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/db2/db2n4s/sqllib/lib32/libdb2.so' successfully loaded
4 ETW000 7545 0.008199
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=10485760, max=0 40 0.008239
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 23 0.008262
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 15 0.008277
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 22 0.008299
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 14 0.008313
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 21 0.008334
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 30 0.008364
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 22 0.008386
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 21 0.008407
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 22 0.008429
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 21 0.008450
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 22 0.008472
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 20 0.008492
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 22 0.008514
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 22 0.008536
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 20 0.008556
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 22 0.008578
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 21 0.008599
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 22 0.008621
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 21 0.008642
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 22 0.008664
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 23 0.008687
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 22 0.008709
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 33 0.008742
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000 22 0.008764
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000 23 0.008787
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000 22 0.008809
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 27 0.008836
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000 21 0.008857
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000 22 0.008879
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000 22 0.008901
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000 22 0.008923
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000 21 0.008944
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000 21 0.008965
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000 31 0.008996
4 ETW000 [dev trc ,00000] Supported features: 16 0.009012
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 19 0.009031
4 ETW000 [dev trc ,00000] ..done 70 0.009101
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 15 0.009116
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] CON = 0 (BEGIN)
4 ETW000 31472 0.040588
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "15" ("PROCESSIN
4 ETW000 25 0.040613
4 ETW000 [dev trc ,00000] &+ G FAILURE"). SQLSTATE=08001
4 ETW000 23 0.040636
4 ETW000 [dev trc ,00000] &+
4 ETW000 25 0.040661
4 ETW000 [dev trc ,00000] &+
4 ETW000 24 0.040685
4 ETW000 [dev trc ,00000] &+
4 ETW000 22 0.040707
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END) 26 0.040733
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'N4S' as 'sapn4s' failed
4 ETW000 60 0.040793
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'N4S'"
Thanks,
Sriram -
SAP Netweaver ABAP Trial - Running but Dialog Queue standstill
Dear all,
since today morning I am having troubles with the SAP Netweaver ABAP Trial version which has run now for over 6 months without any issues. The issues appeared suddenly and I didn't change anything to configuration / network. I am going through the forum now since a couple of hours and I have checked the following. I have read that the most common error is, that the log is full. Anyhow I have checked the log files.
1.) Logfiles: I can't see anything in the log file saying that something is wrong. Please find enclosed the log files DEV_DISP, DEV_W0 and DEV_MS:
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 201
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\mwsrvsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_mwsrvsap
pid 3112
Sun Sep 07 12:04:00 2014
kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3112) [dpxxdisp.c 1315]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
shared lib "dw_rndrt.dll" version 201 successfully loaded
shared lib "dw_abp.dll" version 201 successfully loaded
shared lib "dw_sym.dll" version 201 successfully loaded
shared lib "dw_aci.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sun Sep 07 12:04:04 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >mwsrvsap_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000079D0050, size: 6363600)
DpShMCreate: allocated sys_adm at 00000000079D0060
DpShMCreate: allocated wp_adm_list at 00000000079D3070
DpShMCreate: allocated wp_adm at 00000000079D3260
DpShMCreate: allocated tm_adm_list at 00000000079DAE40
DpShMCreate: allocated tm_adm at 00000000079DAE90
DpShMCreate: allocated wp_ca_adm at 0000000007F1DDA0
DpShMCreate: allocated appc_ca_adm at 0000000007F2D7B0
DpShMCreate: allocated comm_adm at 0000000007F3D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000007FCBB60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000007FCBC10
DpShMCreate: allocated j2ee_adm at 0000000007FCBC50
DpShMCreate: allocated ca_info at 0000000007FCCBD0
DpShMCreate: allocated wall_adm at 0000000007FCCC60
Sun Sep 07 12:04:05 2014
DpCommAttachTable: attached comm table (header=0000000007F3D1C0/ft=0000000007F3D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8195MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8196MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2048 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1701]
***LOG Q0K=> DpMsAttach, mscon ( mwsrvsap) [dpxxdisp.c 12467]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >mwsrvsap_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Sun Sep 07 12:04:06 2014
CCMS: AlMsUpload successful for C:\usr\sap\NSP\DVEBMGS00\log\ALMTTREE.DAT (657 MTEs).
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
DEV_W0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 201
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\mwsrvsap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_mwsrvsap
M pid 3208
M
M kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 3208) [dpxxdisp.c 1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000100C0050, size: 6363600)
M DpShMCreate: allocated sys_adm at 00000000100C0060
M DpShMCreate: allocated wp_adm_list at 00000000100C3070
M DpShMCreate: allocated wp_adm at 00000000100C3260
M DpShMCreate: allocated tm_adm_list at 00000000100CAE40
M DpShMCreate: allocated tm_adm at 00000000100CAE90
M DpShMCreate: allocated wp_ca_adm at 000000001060DDA0
M DpShMCreate: allocated appc_ca_adm at 000000001061D7B0
M DpShMCreate: allocated comm_adm at 000000001062D1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000106BBB60
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000106BBC10
M DpShMCreate: allocated j2ee_adm at 00000000106BBC50
M DpShMCreate: allocated ca_info at 00000000106BCBD0
M DpShMCreate: allocated wall_adm at 00000000106BCC60
M DpCommAttachTable: attached comm table (header=000000001062D1C0/ft=000000001062D1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M
M Sun Sep 07 12:04:06 2014
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Sun Sep 07 12:04:08 2014
M ThInit: running on host mwsrvsap
M
M Sun Sep 07 12:04:10 2014
M calling db_connect ...
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.201)
C
C DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.201) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C (0.081) No UPSERT on WBCROSSGT (note 1521468)
C (0.080) New feature batch streaming (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.9.7 BUILD 010-123-243-190
C SQLDBC Runtime : libSQLDBC 7.9.7 BUILD 010-123-243-190
C SQLDBC client runtime is MaxDB 7.9.7.010 CL 243190
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.9.07 Build 010-123-243-190
C Database release is SAP DB 7.9.07.010
C INFO : Database 'NSP' instance is running on 'mwsrvsap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: mwsrvsap-NSP, since=20140907120410, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 731
M ThInit: db_connect o.k.
M
M Sun Sep 07 12:04:11 2014
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
DEV_MS:
trc file: "dev_ms", trc level: 1, release: "720"
[Thr 3092] Sun Sep 07 12:03:56 2014
[Thr 3092] ms/http_max_clients = 500 -> 500
[Thr 3092] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 101
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 3088
[Thr 3092] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3088) [msxxserv.c 2278]
[Thr 3092] load acl file = C:\usr\sap\NSP\SYS\global\ms_acl_info.DAT
[Thr 3092] MsGetOwnIpAddr: my host addresses are :
[Thr 3092] 1 : [10.0.0.225] mwsrvsap.local (HOSTNAME)
[Thr 3092] 2 : [127.0.0.1] mwsrvsap (LOCALHOST)
[Thr 3092] 3 : [10.10.0.10] mwsrvsap (NILIST)
[Thr 3092] MsHttpInit: full qualified hostname = mwsrvsap
[Thr 3092] HTTP logging is switch off
[Thr 3092] set HTTP state to LISTEN
[Thr 3092] *** HTTP port 8100 state LISTEN ***
[Thr 3092] *** I listen to internal port 3900 (3900) ***
[Thr 3092] *** HTTP port 8100 state LISTEN ***
[Thr 3092] CUSTOMER KEY: >V1901974459<
[Thr 3092] build version=720.2011.10.26
2.) So I installed the SAP MaxDB Database Manager in order to check the logs and do an archiving. But here seems to be the issue - I can not see the NSP Database instance (see attached screenshot). But how can this be? The log file say that the db connection is ok?
3.) What is really strange to me is the Syslog in the management console --> see log3.png. Why does it say work process in reconnect status?
Does anybody have an idea how to solve this issue? Help is really appreciated and points will be rewarded.
Best regards
MaikThank you first of all for your answer.
I tried to do so, but in the MaxDB Database Manager I can add the db instance, but I am not able to connect to it (service is running). -
Sap r/3 versions release dates
hi guys,
can any one tell me the exact date of sap r/3 and netweaver released.
all the versions from r/3 4.6 to ecc 6.0.
thanks
kevinSAP R/3 Enterprise Release 4.0B
Release Date June 1998
SAP R/3 Enterprise Release 4.5B
Release Date March 1999
SAP R/3 Enterprise Release 4.6C
December 1999
SAP R/3 Enterprise Release 4.6C
April 2001
SAP R/3 and R/3 Enterprise 4.70 SR1
Release Date March - December 2003
ERP Central Component
Release 5.0 SR1
Release Date August 2005
ERP Central Component
Online Update April 2007
Release 6.0 SR1 SP08
Release Date June 2006
SAP enhancement package 1 for SAP ERP 6.0
Release Date December 2006
ERP Central Component
Release SAP enhancement package 2 for SAP ERP 6.0
Release Date July 2007
SAP NetWeaver 2004 (SPS 20)
File Type HTML (PlainHTML)
Release Date May 2007
Knowledge Center for SAP NetWeaver 7.0 (2004s)Support Package Stack 13, September 2007
SAP NetWeaver Mobile 7.1 SPS 02
Release Date July 2007
Source :http://help.sap.com/
Maybe you are looking for
-
Safari tries to open Windows Media files using iTunes
Sometimes when I try to view a Windows Media file on my PowerBook running 10.3.9 instead of the Windows Media player opening to play the file iTunes will open. When that happens I have to force quite iTunes and Safari, locate a WMV file on my hard dr
-
Video import problem from iphone5 to PC giving error
Hi evereyone, I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick ti
-
Zooming inconsistency with links in pdf
I have an interactive pdf set up containing different chapters & vast amounts of links. I have set the pdf up to 100% zoom. When I open it all is fine, but as soon as I begin to click through the document the page zooming becomes erratic. I have trie
-
[SOLVED] OS X Internet Sharing to arch over ethernet
I previously had this working with arch's gateway set to the mac's ip and both subnet mask the same, but now OS X just shows the cable as unplugged. Any recommendations on how to set my rc.conf? Last edited by shnooks (2011-08-01 20:06:38)
-
Oracle Net Configuration Assistant failed
when Instaling Oracle 10G developer suite on my machine (complete installation) I got this error: Output generated from configuration assistant "Oracle Net Configuration Assistant": Parsing command line arguments: Parameter "silent" = true Parameter