SAP NetWeaver 7.30 High-Availability installation without MSCS
Hi all,
Do we have any option to install SAP NetWeaver 7.30 High-Availability System on the third-party cluster solution, except for MS Cluster Service?
I tried to install the first cluster node without MSCS configuration, however, sapinst.exe checks whether we already set up MSCS on this node, then installer aborted.
I'd like to know the way to disable this checks. (Or, way to mimic the installer as if MSCS cluster configuration was done.)
If unavailable, I have to install MSCS first, and SAP NetWeaver, then also have to uninstall MSCS instead of out cluster software;
It seems to me no sense.
Best regards,
Hi Peter,
Thanks for your quick response.
It is disappointed for me that HA Installation is tightly combined with MSCS.
Do we have a way to migrate from other installation scenario to High-Availability?
For example, once we install ASCS instance as distributed system, then migrate
it for High-Availability usage, leveraged by profile updates and so on?
I'm not sure how High-Availability installation is different from other installation
scenario except for installation path and hostname to be used for connection.
Best regards,
Similar Messages
-
Oracle Version - High Availability Installation
Hi,
We are shortly to install SAP on Windows2008/Oracle.
The DEV and TEST systems are to be installed as stand alone Centralised installations.
The LIVE system is to be installed as a High Availability system, clustered over two hosts.
I have questions surrounding the Oracle Editions:
Looking at the differences between the two Oracle editions in respect to our requirements, Enterprise supports fail-over, whereas Standard does not.
So,
Does an SAP high availability installation require Oracle Enterprise Edition to be installed or can it be Oracle Standard Edition?
Does SAP's High Availability installation functionality handle the complete failover, regardless of Oracle Version?
Thanks in advance for your assistance.
Chris> Does an SAP high availability installation require Oracle Enterprise Edition to be installed or can it be Oracle Standard Edition?
SAP systems (also for test and QA) always require Oracle Enterprise edition. You may get it technically to work with the standard edition but it's not supported:
Note 105047 - Support for Oracle functions in the SAP environment
<...>
56. Standard Edition
* SAP products always require the Oracle Enterprise edition, using Oracle Standard edition is not permitted.
<...>
Markus -
SAP PI 7.1 High Availability, Active-Active or Active-Passive
We are planning go to HA system for PI 7.11
I've few doubts/questions regarding this.
Can we make Active-Active clustering or Active-Passive? Or itu2019s our choice?
If it is our choice, then is at Configuration level (Application level)? or hardware level?
What are additional steps we need to take for Active-Active clustering? (Which we are looking for)
What is recommended by SAP?
Any Pros & Cons.
Please reply me if you have any information regarding this, any information regards to this is greatly appreciated
Thanks
SagarHi Sagar,
Please use Active-Passive for your SAP PI 7.1 High Availability system.
For more details, please refer to the sdn link:
High Availability
->High Availability FAQ
->What is an "active-active cluster"?
An active-active cluster consists of two independent server nodes at a minimum. The workload within a cluster resource is shared between the server nodes. If a cluster node crashes the processes are resumed by the remaining cluster nodes. An active-active cluster configuration means that a cluster resource is active on all cluster nodes. The aim of an active-active cluster is not only to provide high availability system but to distribute the workload between the cluster nodes. Applications with a very high workload like databases benefit from an active-active setup. Due to the SAP Central Services Instance is a light component an active-active setup does not make any sense. Therefore the SCS is implemented as an active-passive cluster resource.
Best Regards
Julia -
SAP XI 3.0 High Availability Whitepaper
Hi,
is anyone of you aware of a Whitebook for SAP XI 3.0 High Availability?
We are currently in the process to migrate our current SAP XI 3.0 System, which runs on Windows 2003, to a HA solution.
But I am still unsure about all the possiblities and pros and cons that you have with such a scenario.
If you do have any documents/papers or similar regarding HA solution or experiences in this area please let me know.
Thanks in advance!
kind regards
Nesimihi Nesimi,
try to post this message in sap xi forum
Process Integration (PI) & SOA Middleware -
AIX6.1+HACMP+DB2 9.1+SAP ECC 6.0 High Availablity Installation
Dear All,
This is to request you that anyone having a sure shot Installation guide /Solution to Install SAP in High Availablity using following platform.
1. AIX 6.1
2. DB2 9.1
3. HACMP
4. ECC 6.0 SR 2
Note: Not Failover by scripting. High Availablity like Microsoft MCSC. Complete installation on Virtual host, IP and Shared File system/stirage.
Please....................................................
Regards
DharmendraInstalling SAP NW07 SR3 with DB2 on AIX HACMP
Scenario:-
DB will run on Node A
SAP CI will run on Node B
If node A fails DB will failover to Node B
If node B fails CI will failover to Node A
Shared SAP and DB filesystem are in SAN
Filesystems will failover accordingly
Requirements:-
SAP NW07 SR3 DVDs
AIX Node A
AIX Node B
HACMP supports node failures. We are not using HACMP to probe Application (SAP/DB) failures. i.e. if SAP or DB process crashes HACMP will not failover the resource groups.
/etc/hosts should have IPs of both nodes
Assumptions:-
PRD = PRD
Node A hostname: dbserver
Node B hostname: ciserver
Shared filesystems
These filesystems can be moved/ failed over (unmounted /mounted) from one node to another.
/usr/sap/PRD
/sapmnt/PRD
/db2/PRD
/db2/db2prd
/db2/PRD/sapdata1
/db2/PRD/sapdata2
/db2/PRD/sapdata3
/db2/PRD/sapdata4
/db2/PRD/log_dir
/db2/PRD/db2dump
Users and Groups will be created by SAPINST.
Please make a note of the UIDs as we have to use the same UIDs and GIDs on other node as well.
User Home directory:- For prdadm please use a home directory on shared disk
For e.g. /usr/sap/PRD/home/prdadm
Use Distributed Installation option in SAPINST
Installation steps:-
Node A:
Mount SAP filesystems
Mount DB2 filesystems
Check /etc/hosts that IP of both nodes are available
Ping both nodes and check the IP address
Check output of command ifconfig u2013a and confirm that both IPs are available
Start SAPINST with SAPINST_USE_HOSTNAME option.
For e.f. ./sapinst SAPINST_USE_HOSTNAME=dbserver
Step 1: Global host preparation (this should be easy to finish)
Step 2: Database instance installation
During this step note down UIDs and GIDs created by sapinst.
During this step please choose /usr/sap/PRD/home/prdadm as user home for prdadm user.
With SR3 DVDs db2 software will be installed in /db2/PRD/db2_software
Step 3: Install SAP Central Instance with SAPINST_USE_HOSTNAME=ciserver
Stop / Start SAP -> Login and confirm SAP instance is running fine.
Shutdown SAP and DB2
Add entries in .rhosts in home directory on user prdadm and db2prd
For example in /usr/sap/PRD/home/prdadm/.rhots
<IP Address of Node A> prdadm
<IP Address of Node B> prdadm
<all possible IP address> prdadm
Similarly for /db2/db2prd/.rhosts
<IP Address of Node A> db2prd
<IP Address of Node B> db2prd
<all possible IP address> db2prd
Node B:
Move SAP resources from Node A to B (i.e. SAP filesystems should become available on Node B)
DO NOT MODE DB RESOURCES, Let it stay on Node A alone.
Create /db2/PRD and /db2/db2prd directories (this should have some free space, 10 GB is good to go)
Start SAP installation under Distributed installation option
Step 1: Global host preparation
Temporarily change /etc/hosts and make the IP of dbserver same as ciserver.
dbserver line should be written above ciserver line
i.e. u2018ping dbserveru2019 and u2018ping ciserveru2019 should return same IP address on Node B (NOT NODE A)
Step 2: Database instance installation with option SAPINST_USE_HOSTNAME=dbserver
During this installation, make sure UIDs and GIDs are given same as in Node A.
You can confirm the UIDs from /etc/passwd and GID from /etc/group
Also, make sure you specify user home for prdadm as /usr/sap/PRD/home/prdadm
Once installation starts ABAP Load and one or two jobs are completed, please cancel the installation.
as db2prd
db2stop force
db2start
db2 connect to PRD
It should be successful. This confirms the DB2 is setup properly.
db2stop terminate
db2stop force
rm u2013r /db2/db2prd/*
rm u2013r /db2/PRD/sapdata1
rm u2013r /db2/PRD/sapdata2
rm u2013r /db2/PRD/sapdata3
rm u2013r /db2/PRD/sapdata4
rm u2013r /db2/PRD/log_dir
rm u2013r /db2/PRD/db2dump
Retain these directories so that you can mount the shared filesystems from Node A to Node B during failover.
Change and correct IP address in /etc/hosts of host dbserver, which we changed temporarily earlier.
Failover DB resources to Node B
Check if all DB2 filesystems are correctly available.
On Node A, check and double confirm that there are no files/directories under /db2 and its subdirectories. i.e. all filesystems have come to Node B.
In our case there was one filesystem /db2/PRD/db2prd which did not come to node B and we had to struggle a lot to find the same.
CONTINUED BELOW !!! -
Linux TestDrive SAP NetWeaver 7.02 MaxDB available in SAP Shop
We have just released a fresh version of our NetWeaver testdrive. Testdrive of NetWeaver 7.02 SPS7 is MaxDB based and can be ordered free of charge in SAP Knowledge Shop (www.sap.com/shop -> Knowledge Shop -> Documentation > SAP NetWeaver > SAP NetWeaver), material number is 50105321. A DB2 LUW version will follow within the next few weeks, we also work on a download version. We have tested with SLES10 and SLES11, RHEL6 and Ubuntu 10.10. Suse will provide a custom made SLES11 SP1 based virtual appliance with sufficient diskspace to home the testdrive. We have worked on a couple of simplifications to make the installation process even simpler than it was before.
We await your feedback
ManfredHi Manfred,
you mentioned, that SUSE would provide a custom made vmware image of SLES 11 SP1 to be used with this preview edition. Are there any news on wether and when this will be available ?
regards,
Jakob -
High Availability Installation - Help
Hi All,
we are planning for high availabitlity installation for ECC 6.0/oracle 10.2 on HP-UX,
i understand that we need atleast two identical physical machines of HP-UX,
Please help me in below things :
1. link or any document for HA installation (apart from normal inst guide)
2. i have installed ECC 6.0 o HP-UX for dev/qa will the file system remain same for
HA installation also or what changes required ?
3. Any hints on installation procedure.
we have only abap engine involved.
Thanking you in advance
All the valid replied will be appreciated and rewarded.
Regards
NarenHello,
Here is the link for HA installation : https://websmp209.sap-ag.de/instguides --> SAP NetWeaver --> Installation --> Oracle --> HP-UX --> ABAP, here you can find everything on HA.
You have to configure your filesystem in cental location, you can not use the same file system as DEV/QA becuase you have not configured the same in HA.
OS level HA configuration will be done by UNIX admin and after that you have to install SAP as per normal procedure only few changes which you can findout if you go thourgh the installation guide.
Cheers,
-Sunil -
High Availability Installation issue (ASCS instance did not stop)?
Hi,
We are facing an issues in High availability system installation. (ERP ECC6.0 EHP5) We have completed Node A installation.
We are installing based on Virtual IP.
Node A Installation:
Steps 1: ASCS instance
Step 2 : DB Instance
Step 3: Enqueue replciation Server istance
Step 4: Central instance
I have complete these steps successfully. But We have started Node B installation. We have faced error in Node B. Error is on ASCS instance.
Error Details: "SID/ASCS00(partially) did not stop. " In ASCS instance 5th phase, we are getting this error.
Due to this error, We are not able to continue the process.
Could you please help to solve this.
Thanks!!!Hi Sir/Madam
I have one to install SAP cluster with two node with window server 2003 x64 R2, SQL server 2005.
below it is my step.
1. assume my window cluster and sql server are working fine.
2. I have start install ASCS on virtual disk from node 1.
3. i have install First MSCS on virtual from node 1.
4. I have install Database instance on virtual disk from node 1.
5. I have install Second MSCS on virtual from node2.
6 I have install ERS on physic disk on node 1.
7. i have instgall ERS on physic disk on node2.
8 i have install CI on physic disk on node 1
9 i have install DI on physic disk on node 2.
this is procedure that my consultant have set up on my real sap system . but when I try to install on lab . i got error when i finish on step 5 above .
could you please tell me the above step is correct or not ?
thanks . -
SAP NetWeaver 2004s Java Trial Version installation problem
I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR . -
Error:sap netweaver 7.1 trial version installation
Hello all i am installing sap netweaver 7.1 trial version during installation i am facing this error .
i am using windows 2003 server Please help me.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\suxfvih' does not exist on the 'localhost' host.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.Hi,
Could you provide the resolution. Having the same issue.
Thanks,
kajal -
SAP NetWeaver 2004s Java Trial Version Installation error
Dear Techies,
I tried to install the trial version (SAP NetWeaver 2004s Java Trial Version
) downloaded from SDN, but I am getting an error immediately after started the installation. The log as given below.
Please suggest me where I can delete this special character mentioned in the log file ? The full log also is given below
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
Thanks and best regards,
Shiju
Full log :
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\Program Files\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\instgui.jar;C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Netweaver_FullKit\SAPNW2004sJavaSP9_Trial\SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host MythiliKannan, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml'.
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml'.
INFO 2007-04-13 21:55:09
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-04-13 21:55:16 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml'.
INFO 2007-04-13 21:55:16
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
ERROR 2007-04-13 21:55:17
CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: Bad path component: "C:.
ERROR 2007-04-13 21:55:17
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2007-04-13 22:00:30 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
Exit status of child: 1Hi,
I changed the system name but still I am getting the same error. Previously there was an SAP system was installed in my pc later I uninstalled that, but still there are two SAPsid_00 and SAPsid_01 (where in sid is MS) is running. I think this is the problem. I disabled the services as well but still I am getting the same error during the installation. How to delete the windows services ? and how to do a clean up for registry ?. I feel if I do theses two then I can install.
Thans a lot for your helps and support.
Shiju -
SAP NetWeaver 7.02 trail version installation error during START INSTANCE
Hi all,
Please help me in solving this installation problem. I've tried installing the setup several times but every time i get this same error that :
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Instance NSP/DVEBMGS00 reached state SHUTDOWN after having state STARTING. Giving up...HI
using windows 7, 4gb ram , core 2 duo, tried virtual memory 10 gb and using other windows seperate account TRACE 2011-11-10 16:46:44.117 [iaxxclib.cpp:188] CLib::load() Opened sylib721.dll TRACE 2011-11-10 16:46:44.133 exe dir is E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798 TRACE 2011-11-10 16:46:44.351 MessageLib initialized successfully. INFO 2011-11-10 16:46:44.367 [synxcpath.cpp:815] CSyPath::createFile() lib=syslib module=syslib Creating file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel_test_10_Nov_2011_16_46_44. INFO 2011-11-10 16:46:44.367 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel_test_10_Nov_2011_16_46_44. TRACE 2011-11-10 16:46:44.367 [syxxclogbook.cpp:209] PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath) lib=syslib module=syslib Initialized SAP kernel tracing to file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel INFO 2011-11-10 16:46:44.383 [synxcpath.cpp:815] CSyPath::createFile() lib=syslib module=syslib Creating file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel_test_10_Nov_2011_16_46_44. INFO 2011-11-10 16:46:44.383 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel_test_10_Nov_2011_16_46_44. TRACE 2011-11-10 16:46:44.398 [syxxclogbook.cpp:209] PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath) lib=syslib module=syslib Initialized SAP kernel tracing to file E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\dev_sap_kernel TRACE 2011-11-10 16:46:44.398 [iaxxclib.cpp:188] CLib::load() Opened E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798/iaguieng721.dll TRACE 2011-11-10 16:46:44.414 [iaxxgenimp.cpp:918] CGuiEngineImp::init() receiving and sending on port 21200 TRACE 2011-11-10 16:46:44.648 [syxxccuren.cpp:31] CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'E:/usr/sap/NSP/tmp/sapinst_exe.456.1320923798/jre') lib=syslib module=syslib Environment variable SAPINST_JRE_HOME set to value 'E:/usr/sap/NSP/tmp/sapinst_exe.456.1320923798/jre'. TRACE 2011-11-10 16:46:46.005 exe dir is E:/usr/sap/NSP/tmp/sapinst_exe.456.1320923798 INFO 2011-11-10 16:46:46.21 [synxcpath.cpp:815] CSyPath::createFile() lib=syslib module=syslib Creating file C:\Program Files\sapinst_instdir\x. INFO 2011-11-10 16:46:46.21 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file C:\Program Files\sapinst_instdir\x. TRACE 2011-11-10 16:46:46.21 [iaxxclib.cpp:188] CLib::load() Opened E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798/iakdblib721.dll TRACE 2011-11-10 16:46:46.021 SAPinst build information: -
abi version : 721 make variant: 720_REL build : 1147189 compile time: Apr 20 2010 22:51:41 TRACE 2011-11-10 16:46:46.333 [iaxxgenimp.cpp:469] CGuiEngineImp::showDialog() showing dlg diProductChoice TRACE 2011-11-10 16:46:46.333 [iaxxgenimp.cpp:488] CGuiEngineImp::showDialog() TRACE 2011-11-10 16:47:03.9 [iaxxclogintimeout.cpp:102] CLoginTimeout::run() Login in progress TRACE 2011-11-10 16:47:03.009 Connection request to guiengine backend by host 127.0.0.1 TRACE 2011-11-10 16:47:03.212 Protocol version is 3.1 TRACE 2011-11-10 16:47:03.212 Send connect information TRACE 2011-11-10 16:47:03.212 client logged on TRACE 2011-11-10 16:47:03.383 [iaxxgenimp.cpp:1245] CGuiEngineImp::acceptAnswerForBlockingRequest Waiting for an answer from GUI TRACE 2011-11-10 16:47:14.623 [iaxxdlghnd.cpp:97] CDialogHandler::doHandleDoc() CDialogHandler: ACTION_NEXT requested TRACE 2011-11-10 16:47:14.623 [iaxxcdialogdoc.cpp:203] CDialogDocument::submit() INFO 2011-11-10 16:47:14.732 [synxcpath.cpp:815] CSyPath::createFile() lib=syslib module=syslib Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x. INFO 2011-11-10 16:47:14.732 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x. TRACE 2011-11-10 16:47:17.150 [iaxxgenimp.cpp:469] CGuiEngineImp::showDialog() showing dlg diRestartOrCancel TRACE 2011-11-10 16:47:17.150 [iaxxgenimp.cpp:488] CGuiEngineImp::showDialog() Dialog does not contain standard input handler, so the backend is not able to generate a log entry TRACE 2011-11-10 16:47:17.150 [iaxxgenimp.cpp:1245] CGuiEngineImp::acceptAnswerForBlockingRequest Waiting for an answer from GUI TRACE 2011-11-10 16:47:21.424 current working directory is C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/ INFO 2011-11-10 16:47:21.471 [synxcpath.cpp:815] CSyPath::createFile() lib=syslib module=syslib Creating file C:\Program Files\sapinst_instdir\x. INFO 2011-11-10 16:47:21.471 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file C:\Program Files\sapinst_instdir\x. TRACE 2011-11-10 16:47:21.487 [syxxcfile.cpp:168] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const lib=syslib module=syslib Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move. INFO 2011-11-10 16:47:21.487 [synxcfile.cpp:416] CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler) lib=syslib module=syslib Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel. TRACE 2011-11-10 16:47:21.487 [syxxcnode.cpp:441] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL, ISyNode::CopyMoveMode_t 0x3) lib=syslib module=syslib Moved E:/usr/sap/NSP/tmp/sapinst_exe.456.1320923798/dev_sap_kernel to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel TRACE 2011-11-10 16:47:21.502 [syxxclogbook.cpp:209] PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath) lib=syslib module=syslib Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel TRACE 2011-11-10 16:47:23.468 Running with toplevel file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//toplevel.xml TRACE 2011-11-10 16:47:23.530 [syxxcfile.cpp:130] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const lib=syslib module=syslib Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move. TRACE 2011-11-10 16:47:23.530 [syxxcnode.cpp:441] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.5.log, ISyNode::CopyMoveMode_t 0x3) lib=syslib module=syslib Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.5.log TRACE 2011-11-10 16:47:23.561 [syxxcfile.cpp:130] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const lib=syslib module=syslib Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move. TRACE 2011-11-10 16:47:23.561 [syxxcnode.cpp:441] CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.5.log, ISyNode::CopyMoveMode_t 0x3) lib=syslib module=syslib Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.5.log TRACE 2011-11-10 16:47:23.998 Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD. TRACE 2011-11-10 16:47:24.014 Running with dialog file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//dialog.xml TRACE 2011-11-10 16:47:24.248 Running with keydb file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//keydb.xml TRACE 2011-11-10 16:47:24.887 [syxxcfile.cpp:130] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const lib=syslib module=syslib Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move. TRACE 2011-11-10 16:47:24.887 [synxcfile.cpp:516] CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.15.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver) const lib=syslib module=syslib Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.15.xml INFO 2011-11-10 16:47:25.792 [synxcfile.cpp:716] CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.15.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver) const lib=syslib module=syslib Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.15.xml'. TRACE 2011-11-10 16:47:27.649 [kdxxctaco.cpp:219] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib CKdbTableContainerImpl::syncToContainerFile start ... TRACE 2011-11-10 16:47:27.789 [syxxcfile.cpp:130] CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const lib=syslib module=syslib Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move. TRACE 2011-11-10 16:47:27.789 [synxcfile.cpp:516] CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.16.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver) const lib=syslib module=syslib Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.16.xml INFO 2011-11-10 16:47:27.805 [synxcfile.cpp:716] CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.16.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver) const lib=syslib module=syslib Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.16.xml'. TRACE 2011-11-10 16:47:28.366 [kdxxctaco.cpp:252] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib after creating out stream TRACE 2011-11-10 16:47:28.522 [kdxxctaco.cpp:286] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib CKdbTableContainerImpl::syncToContainerFile stop ... TRACE 2011-11-10 16:47:30.20 [kdxxctaco.cpp:219] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib CKdbTableContainerImpl::syncToContainerFile start ... TRACE 2011-11-10 16:47:30.129 [kdxxctaco.cpp:252] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib after creating out stream TRACE 2011-11-10 16:47:30.285 [kdxxctaco.cpp:286] CKdbTableContainerImpl::syncToContainerFile lib=iakdblib CKdbTableContainerImpl::syncToContainerFile stop ... TRACE 2011-11-10 16:47:47.210 SAPinst was started using commandline: E:\usr\sap\NSP\tmp\sapinst_exe.456.1320923798\sapinst.exe TRACE 2011-11-10 16:47:47.210 SAPinst properties are : GUISERVER_DIALOG_PORT=21212 GUISERVER_HTTP_PORT=4239 SAPINST_CONTROL_URL=control.xml SAPINST_DIALOG_PORT=21200 SAPINST_DIALOG_URL=dialog.xml SAPINST_EXE=SAPINST_EXE SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,ClusterMgt,SystemIdentity SAPINST_KEYDB_URL=keydb.xml SAPINST_MESSAGE_CONSOLE_THRESHOLD=info SAPINST_MESSAGE_URL=. SAPINST_PACKAGES_URL=packages.xml SAPINST_RESOURCE_URL=resourcepool.xml SAPINST_SAVE_INPUT=true SAPINST_SCAN_DEVICES=false SAPINST_SKIP_DIALOGS=false SAPINST_TOPLEVEL_URL=toplevel.xml SAPINST_USE_ADVANCED_JS_HANDLING=true SELFEXTRACTOR_EXECUTABLE_NAME=E:/sap/NWABAPTRIAL70206_64/NWABAPTRIAL70206_64/SAP_NetWeaver_702e_Installation_Master/IM_WINDOWS_X86_64/sapinst.exe
thank you , HELP ME please -
High Availability Options Without Enterprise Edition
I think I've found the answer to this already but I just wanted to confirm that I'm getting this right. In SQL Server 2012, is there no way to implement a high-availability solution which doesn't require shared storage or use of a deprecated feature without
having Enterprise Edition?
At the moment we have databases hosted on a primary server running Windows Server 2012 Standard and SQL Server 2012 Standard. We have a second, identical server, and the databases are mirrored between the two servers using Database Mirroring.
This works perfectly and meets all of our requirements. The only possible problem is that we're looking at storing documents using FILESTREAM, which isn't available in Mirrored databases.
From what I've read, Database Mirroring is deprecated in SQL Server 2012. High Availability Groups, which sound great, are only available in the Enterprise Edition. This feels like a real kick in the teeth from Microsoft. We're stuck
with either using a deprecated feature (Mirroring), which is only postponing the problem until the end of 2012's life cycle, or laying out significant amounts of money (in the tens of thousands of pounds GBP) to upgrade to Enterprise Edition, which we just
don't have the budget for.
Why couldn't Microsoft continue to offer a high availability option for businesses without deep pockets? Do I have any options I'm not thinking of? Shared storage is not an option (too costly, single point of failure, geographically separated
datacentres).Thanks for all the feedback.
I was forgetting that even data stored as FILESTREAM would need to be backed up using SQL backups, so I guess that's an issue either way, thank for reminding me, Sebastian.
Geoff, I agree that replication isn't a viable HA solution. FCI has lots going for it, but from what I can make out (and I am just reading up on this now so I could be wrong) requires either shared storage or a third-party tool to move the data from
the Primary server's local storage to the local storage of the Secondaries. It all seems overly complicated when Mirroring does exactly what I need it to do, merrily writing transactions to the mirrors at the same time as the primary databases.
Additionally, whilst you might be right about making the case for Enterprise Edition, it's difficult to make a clear case to non-technical people when we already have a working HA solution and document management. Trying to explain the nuanced advantages
of SQL Server full-text indexing (at present we use a third-party indexing product which stores the index discretely) and simplified querying when the documents are in the same database as their associated data as justification for spending tens of thousands
of pounds is a challenge!
David, that's useful to know, about the disadvantages of using FILESTREAM and how just storing the documents in a VARBINARY(MAX) column might actually give better performance, thank you. -
Sap Netweaver 7.01 ABAP Trial Installation Error
Hi!
I'm trying to install the Sap Netweaver 7.01 ABAP Trial and when I click on "Install" I get this message error:
Summary not available.
This may be a result of an invalid summary type request -- e.g. requesting an install summary when an uninstall has occurred.
Any ideas????
Thanks!Check end of Logfile C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/MaxDBSAPNWPREV.log
have you checked that log? -
SAP BWA 2 node high availability
Hi All
My Customer uses 2 node(48GB each) active SAP BWA for their production system.
As this customer want High Availability for this BWA. He want to change it to 1 node active + 1 node stand by
It uses OCFS2 for cluster file system.
Is it possible for this Customer to change from 2 active to 1 active + 1 stand by ?
My best regards,
Nam Hee JaeHi Kamal,
Thanks and appreciate your reply, but I still wonder how the fail-over happen with 1 active + 1 stand by. Does the watchdog or fail-over mechanism working even in 1 active + 1 stand by ?
Normally, 3 system is required in distributed system to prevent split brain situation.
I want to know if their is any limitation using 1 active + 1 stand by except the memory utilization of each Blade.
My best regards,
Nam Hee
Maybe you are looking for
-
Since I upgraded to Yosemite, Image Capture does not combine pages in to one PDF document
Ever since I upgraded my OS to Yosemite, in my Intel iMac, I have not been able to combine the scanned multiple pages of a document into one PDF file using Image Capture, even though the option to combine pages is checked off. It makes multiple PDF f
-
New to Photoshop cs5 extended...please help
I recently submitted one of my photoshop paintings to a website. I followed the directions for dimensions and when the website uploaded my image is is really blury. Can anyone tell me how to fix this? My image was 3125x1175 pixels and 300 dpi
-
Highlighted Fields in forms to be switched off when opening a pdf form
I have created a simple form and understand that when different machines open the forms that the "Highlight Fields" is either on or off depending on how each user has their reader setup. Is there any way that when I create the form and tell reader wh
-
Database error - ORA-00028: your session has been killed
Hi, I'm working with Discoverer 10g and eBS 11.5.9 I have an application user (oracle) which works perfectly when I login with Discoverer Viewer, but when I try to login with Discoverer Desktop (the Oracle application user check box is checked),I hav
-
Concurrent trouble shooting - Documents
Hi All, Can you please help on getting documents on "Concurrent trouble shooting" Please do needful on this? Thanks a million.....