SAP Netweaver Installation on Mac

Hi,
Can I install SAP Netweaver ABAP trail version on MAC?
Thanks
Rohan

Bob,
there is no need to re-install DB2 v8.1, just ensure that the schema that you want to use is empty (e.g. by dropping the database content with SAPinst). Subsequently, use the installation option "Additional SW Life-Cycle Tasks">"System Copy">"Target System">"Central System">"Based on AS ABAP"-->"Central System Installation" to re-install Appserver and Database with the exported dump.
Best Regards,
Bernd.

Similar Messages

  • Error in Java deployment step of SAP Netweaver installation

    Hi Team,
    We are installing SAP Netweaver 7.4 SR2.
    We are using How to install SAP NetWeaver Application Server Java guide.
    We have completed all steps upto step 27 without much hiccups, but during Java deploy stage, we are getting errors related to port 50004.
    We have restarted the machine and continued the installation .but are still getting the error.
    We have checked the heap size -- Its value is 1024mb.
    Do not know what is wrong with this.
    We have assigned 4 GB Ram and Paging  is also set as per requirement. Previously we had used 3.5 GB RAM
    Attaching the log files:
    In deploy_api.0 log file we are getting lots of messages as:
    Mar 20, 2015 4:09:29 PM  Error:
    Mar 20, 2015 4:09:29 PM  Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:09:29 PM  Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001257 Log file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.log]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001258 Trace file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.trc]
    Mar 20, 2015 4:31:55 PM  Info: com.sap.ASJ.dpl_api.001259 Init command:[deploy]
    Mar 20, 2015 4:32:07 PM  Error: com.sap.ASJ.dpl_api.001224 Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
    url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
    Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:32:08 PM  Error:
    Mar 20, 2015 4:32:08 PM  Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
    url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
    Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
    Mar 20, 2015 4:32:08 PM  Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]

    Hi Suraj,
    Hope you are doing good.
    Nice to hear from you again. It looks like P4 connection is affected:
    1)
    Review note 1158626 and adjust the P4 port configuration accordingly. You will need to check whether the P4 port is available. Note 1925352 will help you to check this (you can use the sapcontrol command or others mentioned to check whether host: 172.16.35.110 and port: 50004 is available or not).
    2)
    Make sure that there are no invalid profile files. Kindly move the profile files that are old to some other location.
    3)
    Also, please verify that you don't have any non-deterministic names in the etc/hosts file, per SAP note:
    1134222 - Cannot access AS Java via P4 connection
    Hope this helps.
    Kind Regards,
    Hemanth
    SAP AGS

  • A Problem with the SAP NetWeaver Installation

    Hello Everybody,
    I'm installing the sap netweaver application but I Have a problem after the definition of the 4 passwords.
    After that step I Have a step named :" DVD/CD Browser > Software Package Check" And the SapInst ask me to enter the location of the "Migration Export" Package, But I didn't find it and I cannot go to the next step and continue the installation.
    I Thank u all for your helps.
    Enjoy.

    Check out these weblogs.........
    /people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
    /people/rich.heilman2/blog/2005/08/17/netweaver-sneak-preview--abap-stack-installation--my-experience

  • IBM: SAP Netweaver installation Error

    Hi all,
    Need help, during the installation of NW on IBM/AS400 encountered this error when adjusting nametab process. see details below.
    An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > Software Life-Cycle Options > System Copy > IBM DB2 for i5/OS > Target System Installation > Central System > Based on AS ABAP and AS Java > Central System( Last error reported by the step: Process call '/usr/sap/P11/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 255. For details see log file(s) dipgntab.log.).
    sapinstlog:
    WARNING 2014-03-28 22:54:13.494
    Execution of the command "/usr/sap/P11/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT" finished with return code 255. Output:
    INFO:  XDNLevelTraceSetLocation: Trace set to: XDNTrace.010075.*
    sapscsa(5):0: I am "            ", but should be "sapsys      ".
    sapscsa: system(/usr/sap//SYS/exe/run/sapmscsa);
    sh: /usr/sap//SYS/exe/run/sapmscsa:  not found
    rslgwr1(16): I cannot get addr of SCSA.
    SysLog:hBZA20140328225413000000000000   no TTY            
          :                                                            0000
          :SVERS                                               dblink  1327
    ERROR in initialization (can't get R/3-version)
    ERROR in initialization (can't get R/3-version)
    ERROR: XDNConnectionManager::CloseAll: Connection 0 Forced Close
    INFO:  XDNSignalMonitor::ThreadMain: ILE Signal Monitor Ended
    INFO:  ClientSIPIDCache: (Hit=3 / Miss=3)
    INFO:  ClientDACache: (Hit=5 / Miss=2)
    INFO:  XDNConnection: FlightTime: 40ms
    INFO:  XDNConnection: WorkTime: 38ms
    INFO:  XDNConnection: NetTime: 1ms
    ERROR 2014-03-28 22:54:13.512
    CJS-30023  Process call '/usr/sap/P11/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 255. For details see log file(s) dipgntab.log.
    ERROR 2014-03-28 22:54:14.403
    FCO-00011  The step adjustNametab with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DB4|ind|ind|ind|ind|db4|0|adjustNametab was executed with status ERROR ( Last error reported by the step: Process call '/usr/sap/P11/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 255. For details see log file(s) dipgntab.log.).
    The log dipgntab.log i cant find it.
    Thanks in advance,
    Cheung

    Hi Cheung,
    Please check resolution in thread https://scn.sap.com/thread/2132916
    Looks to be environment and permission problem
    Hope this helps.
    Regards,
    Deepak Kori

  • SAP Netweaver Installation Issue on Windows 7

    Hi,
    I was trying to install Netweaver 7.3 (Java) in my windows 7 and when I was in step 30 of 33 (Java components deployment)
    I got the following error
    Error message is 'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.. SOLUTION: Check 'undefined' and '' for more information.).
    I have successfully created loopback adapter and able to ping the IP address of the adapter . But when SAP server is trying to connect to this adapter using port 50004 and Its getting the error message . I don't know how to assign the port number to this loop back adapter.
    I tried to use telnet but it failed . (telnet ram-PC 50004 )
    loopback adapter IP : 10.10.0.10
    Host name : ram-PC
    As I am new to SAP , Please let me know is there any file where I need to define host and port ? Do I need to update service.msc file from  windows\system32\drivers\etc\ ? If so, what would be the service name and port ?
    Steps taken to resolve this issue :
    updated windows host file with IP and host name (10.10.0.10 ram-PC)
    updated windows service file with host and port (ram-PC 50004) - This step might be wrong (Do I need to use hostname or service name ?)
    uninstalled Antivirus
    Turned off windows firewall
    Added loopback adapter IP address to Windows firewall inbound rules .
    None of the above steps resolved the error . Please help me on the above issue.any help would be appreciated .
    Thanks
    Ram

    Here is the detailed error message
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.handleConnectionIssue(SessionImpl.java:381)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.parseNamingException(SessionImpl.java:337)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:230)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:150)
         at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:27)
         at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:117)
         at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:180)
         at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
         at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
    Caused by: javax.naming.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:381)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
         at javax.naming.InitialContext.init(InitialContext.java:223)
         at javax.naming.InitialContext.<init>(InitialContext.java:197)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
         ... 6 more
    Caused by: com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004
         at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:64)
         at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:39)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:297)
         ... 11 more
    [ Error ]
    [ Error ] Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ BEGIN ]
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    ERROR[ END ]
    108
    Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [ram-PC:50004]. Cannot establish connection with any of the available instances:
    null:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running.
    [ Info ] Destroy command:[getParams]
    ERROR      2012-02-29 13:27:56.797
               CJSlibModule::writeError_impl()
    CJS-30181  At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.
    ERROR      2012-02-29 13:27:56.844 [sixxcstepexecute.cpp:937]
    FCO-00011  The step deploySoftwareComponents with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|usage_enable|0|NW_DeployOptionalSoftware|ind|ind|ind|ind|deploy|0|deploySoftwareComponents was executed with status ERROR ( Last error reported by the step: At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/RAM/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;C:/usr/sap/RAM/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o "C:/Program Files/sapinst_instdir/NW73/INSTALL/SERVER/DCRetrievedVars.props" --host ram-PC --port 50004' aborts with return code 108. Error message is <b>'undefinednull:ram-PC:50004 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.10.0.10 and port: 50004. Check if the host and port specified are correct and AS Java is up and running..</b> SOLUTION: Check 'undefined' and '' for more information.).
    INFO       2012-02-29 13:27:57.702 [synxcpath.cpp:814]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW73\INSTALL\SERVER\__instana_tmp.xml.
    Edited by: ramkumarsm on Feb 29, 2012 7:37 PM

  • SAP NETWEAVER installation

    Hi,
    I am planning to go with NW04S SR1 java on windowsMS SQL Server  installation.on my mechine. as i am new to this i have no previous installation exp.any one please tell me where can i find this installation stuff.what are the requirements for that. what are the nessary configurations required. any pre insatllations requirements like java web start.first of all how to start with installation please help me thanks in advance.
    Thanks
    kiran.B

    Hi,
    Go to this link
    https://websmp103.sap-ag.de/instguides
    But you nees service market place user id to access the documents. This link will give you interface to different documents related to Planning your infrastructure, and all of Q's  like necessary configuration , pre installation , post installation steps is mentioned in Installation pdf.
    Please reward points for useful answers
    Regards,
    Phani

  • Installation issue SAP Netweaver 7.01 SR1 "SAPNWABAP701SR1" Win XP Pro SP2

    <h5>Can anybody help me with an issue I am having with the SAP Netweaver installation. The installation stops on stage 8 (Installing database server software) and I have done everything within my reach to resolve this issue but have not been successful. Below is the error log from the installation process.</h5></n>
    Error Log
         Installation of MaxDB 
    starting installation Tu, Mar 04, at 16:29:34
    operating system: Windows I386 NT 5.1 Service Pack 2
    callers working directory: C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL
    installer directory: C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386
    archive directory: C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386
    starting preparing phase of package Base 7.7.06.07 32 bit
    getInstalledReleasesWin(): wrong version format
    checking interferences to other packages... ok
    collecting data finished:
    independent data path: e:/sapdb/data
    independent program path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
    package Base successfully checked
    starting preparing phase of package SQLDBC 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbc path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBC.TGZ"
    package SQLDBC successfully checked
    starting preparing phase of package SQLDBC 77 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbc path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC77.TGZ"
    package SQLDBC 77 successfully checked
    starting preparing phase of package Fastload API 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    fastload path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
    package Fastload API successfully checked
    starting preparing phase of package PCR 7104 7.1.04.45
    checking interferences to other packages... ok
    collecting data finished:
    independent program path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
    package PCR 7104 successfully checked
    starting preparing phase of package PCR 7300 7.3.00.60
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7300 path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
    package PCR 7300 successfully checked
    starting preparing phase of package PCR 7301 7.3.01.22
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7301 path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
    package PCR 7301 successfully checked
    starting preparing phase of package PCR 7403 7.4.03.50 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7403 path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
    package PCR 7403 successfully checked
    starting preparing phase of package PCR 7500 7.5.00.50 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7500 path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
    package PCR 7500 successfully checked
    starting preparing phase of package SAP Utilities 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    : e:/sapdb/data
    independent program path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
    package SAP Utilities successfully checked
    starting preparing phase of package ODBC 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    odbc path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBODBC.TGZ"
    package ODBC successfully checked
    starting preparing phase of package MaxDB ADO.NET Driver 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    MaxDB ADO.NET driver path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBADO-SDK.TGZ"
    package MaxDB ADO.NET Driver successfully checked
    starting preparing phase of package DB Analyzer 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbanalyzer path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBANA.TGZ"
    package DB Analyzer successfully checked
    starting preparing phase of package JDBC 7.6.06.00
    checking interferences to other packages... ok
    collecting data finished:
    java driver path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBJDBC.TGZ"
    package JDBC successfully checked
    starting preparing phase of package Server Utilities 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    independent program path: e:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBUTL.TGZ"
    package Server Utilities successfully checked
    starting preparing phase of package Database Kernel 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dependent path: e:/sapdb/nsp/db
    *start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"*
    *test Support/Mapfiles/dbmsrv_clu.map failed: unexpected end of archive C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.SDB*
    *test extraction failed*
    *installation exited abnormally  at Tu, Mar 04, at 16:29:50*
    *ERROR      -03-04 16:29:50.296 [iaxxinscbk.cpp:260]*
    *MDB-07020  The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log.*
    *WARNING[E] -03-04 16:29:50.296*
               *CJSlibModule::writeError_impl()*
    *MUT-03025  Caught ESAPinstException in Modulecall: sdbinst.log.*
    *ERROR      -03-04 16:29:50.296 [sixxcstepexecute.cpp:950]*
    *FCO-00011  The step installServerSoftware with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|Sdb_ServerSoftware|ind|ind|ind|ind|0|0|installServerSoftware was executed with status ERROR ( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log.).*
    *INFO       -03-04 16:34:34.562 [sixxcstepexecute.cpp:1003]*
    *An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|Sdb_ServerSoftware|ind|ind|ind|ind|0|0|installServerSoftware".*
    *Abort execution because of*
    *controller.userDecideToStop*
    *INFO       -03-04 16:34:36.531 [synxcpath.cpp:776]*
               *CSyPath::createFile()*
    *Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.*
    *INFO       -03-04 16:34:36.750 [synxcpath.cpp:776]*
               *CSyPath::createFile()*
    *Creating file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.*
    *Mar 4, 3:34:37 PM [Info]: Stopping services ...*
    *Mar 4, 3:34:37 PM [Info]: Stopping service "SAPinstService" ...*
    *Mar 4, 3:34:37 PM [Info]: Service "SAPinstService" stopped.*
    *Mar 4, 3:34:37 PM [Info]: Services stopped.*
    *Mar 4, 3:34:37 PM [Info]: Server shutdown by SAPinstService*
    *=>sapparam(1c): No Profile used.*
    *=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline*
    *Exit status of child: 2*

    <h5>Can anybody help??????? I still havent managed to get around this problem. Here is the latest error log I got, Juan.</h5>     <n/>Installation of MaxDB<n/> 
         ***********************<n/><n/><n/>
    starting installation Tu, Mar 09, 2010 at 14:31:38
    operating system: Windows I386 NT 5.1 Service Pack 2
    callers working directory: C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL
    installer directory: C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386
    archive directory: C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386
    starting preparing phase of package Base 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    independent data path: c:/sapdb/data
    independent program path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
    package Base successfully checked
    starting preparing phase of package SQLDBC 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbc path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBC.TGZ"
    package SQLDBC successfully checked
    starting preparing phase of package SQLDBC 77 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbc path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC77.TGZ"
    package SQLDBC 77 successfully checked
    starting preparing phase of package Fastload API 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    fastload path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
    package Fastload API successfully checked
    starting preparing phase of package PCR 7104 7.1.04.45
    checking interferences to other packages... ok
    collecting data finished:
    independent program path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
    package PCR 7104 successfully checked
    starting preparing phase of package PCR 7300 7.3.00.60
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7300 path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
    package PCR 7300 successfully checked
    starting preparing phase of package PCR 7301 7.3.01.22
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7301 path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
    package PCR 7301 successfully checked
    starting preparing phase of package PCR 7403 7.4.03.50 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7403 path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
    package PCR 7403 successfully checked
    starting preparing phase of package PCR 7500 7.5.00.50 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    precompiler 7500 path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
    package PCR 7500 successfully checked
    starting preparing phase of package SAP Utilities 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    : c:/sapdb/data
    independent program path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
    package SAP Utilities successfully checked
    starting preparing phase of package ODBC 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    odbc path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBODBC.TGZ"
    package ODBC successfully checked
    starting preparing phase of package MaxDB ADO.NET Driver 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    MaxDB ADO.NET driver path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBADO-SDK.TGZ"
    package MaxDB ADO.NET Driver successfully checked
    starting preparing phase of package DB Analyzer 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dbanalyzer path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBANA.TGZ"
    package DB Analyzer successfully checked
    starting preparing phase of package JDBC 7.6.06.00
    checking interferences to other packages... ok
    collecting data finished:
    java driver path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBJDBC.TGZ"
    package JDBC successfully checked
    starting preparing phase of package Server Utilities 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    independent program path: c:/sapdb/programs
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBUTL.TGZ"
    package Server Utilities successfully checked
    starting preparing phase of package Database Kernel 7.7.06.07 32 bit
    checking interferences to other packages... ok
    collecting data finished:
    dependent path: c:/sapdb/nsp/db
    start extraction test run of "C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
    test Support/Mapfiles/dbmsrv_clu.map failed: unexpected end of archive C:/SAPNWABAP701SR1/MaxDB_77_SP6_Build07_RDBMS/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.SDB
    test extraction failed
    installation exited abnormally  at Tu, Mar 09, 2010 at 14:31:55
    <n/><n/>ERROR      2010-03-09 14:31:55.906 [iaxxinscbk.cpp:260]
    MDB-07020  The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log.
    <n/><n/>WARNING[E] 2010-03-09 14:31:55.921
               CJSlibModule::writeError_impl()
    MUT-03025  Caught ESAPinstException in Modulecall: sdbinst.log.
    <n/><n/>ERROR      2010-03-09 14:31:55.921 [sixxcstepexecute.cpp:950]
    FCO-00011  The step installServerSoftware with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|Sdb_ServerSoftware|ind|ind|ind|ind|0|0|installServerSoftware was executed with status ERROR ( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log.).
    <n/><n/>INFO       2010-03-09 14:32:05.109 [sixxcstepexecute.cpp:1003]
    An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|Sdb_ServerSoftware|ind|ind|ind|ind|0|0|installServerSoftware".
    <n/><n/>################################################<n/>
    Abort execution because of<n/>
    controller.userDecideToStop<n/>
    ##############################################<n/><n/>
    INFO       2010-03-09 14:32:28.781 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
    INFO       2010-03-09 14:32:29.046 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
    Mar 9, 2010 1:32:29 PM [Info]: Stopping services ...
    Mar 9, 2010 1:32:29 PM [Info]: Stopping service "SAPinstService" ...
    Mar 9, 2010 1:32:29 PM [Info]: Service "SAPinstService" stopped.
    Mar 9, 2010 1:32:29 PM [Info]: Services stopped.
    Mar 9, 2010 1:32:29 PM [Info]: Server shutdown by SAPinstService
    =>sapparam(1c): No Profile used.
    =>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    Exit status of child: 2

  • SAP Netweaver 7.0 installation - serious issue (startsap db n4sadm)

    Hi,
    We are trying to setup SAP Netweaver 7.0 (Test Drive x-86 edition) on Fedora 12. We have successfully ran the "install.sh" file. The DB2 instance gets installed and we are able to start it as 'db2n4s' user using the 'db2start' command (we could as well stop using db2stop).
    But, we are facing issues when we start the db2 instance as prescribed by the SAP Netweaver installation guide for the following command.
    n4shost:n4sadm 52> startsap db n4shost
    Checking db6 db Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    expand: write error: Broken pipe
    expand: write error
    * This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
    * Usage:  saposcol -l: Start OS Collector
    *         saposcol -k: Stop  OS Collector
    *         saposcol -d: OS Collector Dialog Mode
    *         saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host pwc01 started
    Running /usr/sap/N4S/SYS/exe/run/startdb
    SQL1042C  An unexpected system error occurred.  SQLSTATE=58004
    Activate database failed
    R3trans connect failed
    DB startup failed
    Details of our DB2 instance
    [db2n4s@]$ ./db2licm -l
    Product name:                     "DB2 Enterprise Server Edition"
    License type:                     "CPU"
    Expiry date:                      "Permanent"
    Product identifier:               "db2ese"
    Version information:              "9.1"
    Annotation:                       "-3;(_c)"
    Features:
    DB2 Database Partitioning:        "Licensed"
    DB2 Performance Optimization ESE: "Not licensed"
    DB2 Storage Optimization:         "Licensed"
    DB2 Advanced Access Control:      "Not licensed"
    DB2 Geodetic Data Management:     "Not licensed"
    Homogeneous Federation for DB2:   "Licensed"
    DB2 Pure XML ESE:                 "Not licensed"
    Thanks,
    Sriram

    Thanks for your quick reply.
    I actually went ahead one step in the problem. Now i am getting the following message when i try to start the sap.
    n4shost:n4sadm 55> startsap db n4shost
    Warning: Could not found virtuell host in ifconfig list
    Checking db6 db Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    expand: write error: Broken pipe
    expand: write error
    * This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
    * Usage:  saposcol -l: Start OS Collector
    *         saposcol -k: Stop  OS Collector
    *         saposcol -d: OS Collector Dialog Mode
    *         saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host pwc01 started
    Running /usr/sap/N4S/SYS/exe/run/startdb
    11/10/2010 14:17:12     0   0   SQL1063N  DB2START processing was successful.
    SQL1063N  DB2START processing was successful.
    Database activated
    R3trans connect failed
    DB startup failed
    Also i did the R3trans -d and have attached the log.
    4 ETW000 R3trans version 6.14 (release 700 - 11.04.07 - 14:28:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 10.11.2010 - 14:19:38
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Wed Nov 10 14:19:38 2010                              83  0.000083
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    21  0.000104
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             29  0.000133
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' ...
    4 ETW000                                                                              35  0.000168
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/N4S/SYS/exe/run/dbdb6slib.so), hdl 0
    4 ETW000                                                                             191  0.000359
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' loaded
    4 ETW000                                                                              21  0.000380
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              27  0.000407
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.107)
    4 ETW000                                                                              85  0.000492
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              24  0.000516
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              27  0.000543
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              18  0.000561
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              27  0.000588
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         20  0.000608
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              21  0.000629
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              25  0.000654
    4 ETW000  [dev trc     ,00000]  DB2 library successfully loaded DB2 library '/db2/db2n4s/sqllib/lib32/libdb2.so' successfully loaded
    4 ETW000                                                                            7545  0.008199
    4 ETW000  [dev trc     ,00000]  RLIMIT_STACK: current=10485760, max=0                 40  0.008239
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
    4 ETW000                                                                              23  0.008262
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            15  0.008277
    4 ETW000  [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
    4 ETW000                                                                              22  0.008299
    4 ETW000  [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           14  0.008313
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
    4 ETW000                                                                              21  0.008334
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
    4 ETW000                                                                              30  0.008364
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
    4 ETW000                                                                              22  0.008386
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
    4 ETW000                                                                              21  0.008407
    4 ETW000  [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
    4 ETW000                                                                              22  0.008429
    4 ETW000  [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
    4 ETW000                                                                              21  0.008450
    4 ETW000  [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
    4 ETW000                                                                              22  0.008472
    4 ETW000  [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              20  0.008492
    4 ETW000  [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              22  0.008514
    4 ETW000  [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
    4 ETW000                                                                              22  0.008536
    4 ETW000  [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
    4 ETW000                                                                              20  0.008556
    4 ETW000  [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
    4 ETW000                                                                              22  0.008578
    4 ETW000  [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
    4 ETW000                                                                              21  0.008599
    4 ETW000  [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
    4 ETW000                                                                              22  0.008621
    4 ETW000  [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
    4 ETW000                                                                              21  0.008642
    4 ETW000  [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
    4 ETW000                                                                              22  0.008664
    4 ETW000  [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
    4 ETW000                                                                              23  0.008687
    4 ETW000  [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
    4 ETW000                                                                              22  0.008709
    4 ETW000  [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
    4 ETW000                                                                              33  0.008742
    4 ETW000  [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
    4 ETW000                                                                              22  0.008764
    4 ETW000  [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
    4 ETW000                                                                              23  0.008787
    4 ETW000  [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
    4 ETW000                                                                              22  0.008809
    4 ETW000  [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
    4 ETW000                                                                              27  0.008836
    4 ETW000  [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
    4 ETW000                                                                              21  0.008857
    4 ETW000  [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
    4 ETW000                                                                              22  0.008879
    4 ETW000  [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
    4 ETW000                                                                              22  0.008901
    4 ETW000  [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
    4 ETW000                                                                              22  0.008923
    4 ETW000  [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
    4 ETW000                                                                              21  0.008944
    4 ETW000  [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
    4 ETW000                                                                              21  0.008965
    4 ETW000  [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
    4 ETW000                                                                              31  0.008996
    4 ETW000  [dev trc     ,00000]  Supported features:                                   16  0.009012
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 19  0.009031
    4 ETW000  [dev trc     ,00000]  ..done                                                70  0.009101
    4 ETW000  [dev trc     ,00000]  Running with UTF-8 Unicode                            15  0.009116
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1634] CON = 0 (BEGIN)
    4 ETW000                                                                           31472  0.040588
    4 ETW000  [dev trc     ,00000]  &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N  Security processing failed with reason "15" ("PROCESSIN
    4 ETW000                                                                              25  0.040613
    4 ETW000  [dev trc     ,00000]  &+     G FAILURE").  SQLSTATE=08001                                                                               
    4 ETW000                                                                              23  0.040636
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              25  0.040661
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              24  0.040685
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              22  0.040707
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1634] (END)          26  0.040733
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'N4S' as 'sapn4s' failed
    4 ETW000                                                                              60  0.040793
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'N4S'"
    Thanks,
    Sriram

  • Problems starting SAP Netweaver CE 7.1

    Hi,
    I am in the process of porting our application to Netweaver 7.1.  I was trying a few things out and thought a reboot of the server might help.  It didn't.  Not Netweaver won't start.  I am a developer but I just have no idea as to where to start - where are the log files, how do I find out what's wrong?
    Any ideas?
    Chris

    Hi Chris,
    All the log files can be identified in the directory where the SAP Netweaver installation is done. Suppose u installed it in C:/ then u can find the respective logs in C:/ProgramFiles/sapinstalltion directory...
    To find out where it is went wrong, first you please check the J2EE engine is up and running or not...follow the link below:
    https://www.sdn.sap.com/irj/scn/wiki in this link go to Java server troubleshooting...
    Hope this will help you
    Thanks
    Pavani
    Edited by: Pavani Varanasi on Feb 5, 2009 9:02 PM

  • SAP NETWEAVER TRIAL 7.02 Programs or tutorials?

    Is there any demo programs or tutorials I could follow and modify to practice?
    thanks a lot !

    Hi Juan,
    You can familiarize with SAP Netweaver by going into menus and etc. Otherwise, in this link you have plenty of tutorial you should be able to do, just go down the page and there you go! Good luck!
    http://www.kodyaz.com/articles/sap-netweaver-installation-guide-installshield-wizard.aspx
    Best Regards,
    Maxime

  • Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux

    Hi,
    Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
    Thanks,
    Luke

    Hi Sajesh,
    The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
    Luke
    1 Overview
    Purpose
    This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
    You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
    Platforms
    You can install the SAP NetWeaver Developer Studio on:
    Windows 2000
    Windows XP
    Web Browser
    You require Internet Explorer 5.5, or higher.
    Minimum Hardware Requirements
    The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor.

  • New Netweaver Installation

    Hi,
    I have newly installed SAP Netweaver Composition Environment CE 7.1 in our SAP landscape.
    We do not have prior SAP Netweaver Installation in SAP License Keys - installation overview.
    Please let me know how to add SAP Netweaver installation name for our customer number in
    installation overview in support portal.
    Regards,
    Sandeep.

    Hi. Go to http://service.sap.com/licensekey and in left corner read the Documentation,Learning MAP, Frequently Asked Questions. Regards.
    Edited by: Sergo Beradze on Mar 23, 2008 4:11 PM

  • System requirements for SAP Netweaver

    Hi All
        I would like to know the system requirements for SAP Netweaver installation on server.
    Thanks in advance
    Venkat

    Hi Venkat,
    Typically for EP it would be :
    On Windows:
    2 GR RAM,with 30-40GB HD,and with latest Windows SP`s and latest IE.
    If the server is for Production incease the RAM accordingly.
    For Portal RAM is very crucial,as SAPJ2EE Engine uses lot of RAM.
    I hope this helps.
    If yes,do award points.
    Rgs
    vikas

  • SAP NetWeaver CE 7.2 Installation error in Deploying java component phase

    Dear Experts,
                        I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
    An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
    > Installation Options > Application Server Java > Standard System > Standard System(
    Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
    classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
    /usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
    /usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
    /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
    -Xmx256m -Ddc.api.verbose=false
    com.sap.engine.services.dc.api.cmd.Runner
    deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
    -w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
    Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
    J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
    Start: Sun Sep 26 02:23:40 IST 2010
                        OK: connected to CE1 on jdbc/pool/CE1
                        OK: disconnected
                        Stop: Sun Sep 26 02:23:42 IST 2010*
                        sapnce:ce1adm 16>
                              Then I had checked the R3 trans and log file is
    4 ETW000                                                                                32  0.117400
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1017'                         26  0.117426
    4 ETW000  [dev trc     ,00000]     set_ocica() -> SQL error code 1017                                     21  0.117447
    4 ETW000  [dev trc     ,00000]  -->oci_get_errmsg (con=0, rc=1017)                                        21  0.117468
    4 ETW000  [dev trc     ,00000]     OCIErrorGet -> SQL error code: 1017                                    84  0.117552
    4 ETW000  [dev trc     ,00000]     ORA-01017: invalid username/password; logon denied
    4 ETW000                                                                                30  0.117582
    4 ETW000  [dev trc     ,00000]     DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB                           23  0.117605
    4 ETW000  [dblink      ,00000]  ***LOG BY2=>sql error 1017   performing CON                               93  0.117698
    4 ETW000  [dblink      ,00000]  ***LOG BY0=>ORA-01017: invalid username/password; logon denied            24  0.117722
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'CE1'"
                        Please help me in this I strucked in this step for last 1 day.
    Regards,
    Sampath
    Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readability

    Sorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
    Hi All,
    I am facing similar issue , My error also similar , Here is the summery of the error,  Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap  directory.
    An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
    Thanks
    Naveen

  • Problem with SAP NetWeaver 04 SP16 installation when running Phase 6

    Hi,
    When I was installing SAP NetWeaver 04 SP16(Full Java Edition),I got this error in phase 6:
    ERROR 2006-04-20 03:10:23
    MDB-07001  No action defined for actor.
    ERROR 2006-04-20 03:10:23
    CJS-00030  Assertion failed: in function sapdb_db_create(db_nm, db_host, db_ver) {    var
    dep_root = sapdb_inst_root(db_nm);    var sdb_i = new sdbInstance();    sdb_i.dbName =
    db_nm;    sdb_i.dbHost = db_host;    sdb_i.dbVer = db_ver[0] + "." + db_ver[1];   
    sdb_i.ctlUser = sapdb_get_db_user("CONTROL", db_nm, db_host);    sdb_i.ctlUserPasswd =
    sapdb_get_db_user_passwd("CONTROL", db_nm, db_host);    var actorObj = new SdbExtActor();  
    actorObj.setSdbInstance(sdb_i);    actorObj.setDbmCmd("DB_CREATE");   
    actorObj.setExecutable(sapdb_dbmcli_path());    actorObj.setDbRoot(dep_root);    var rv =
    actorObj.sessionExecute();    ASSERT(arguments.callee, rv == "OK", " SDB: ERROR CREATING
    DATABASE INSTANCE! Check the XCMDOUT.LOG FILE");    var creation_ok = false;    var i_size
    = actorObj.outSize();    for (var i = 0; i < i_size; i++) {        var s_line =
    actorObj.getOutputLine(i);        if (/OK/.test(s_line)) {            creation_ok = true;  
         }    }    ASSERT(arguments.callee, creation_ok, "SDB: ERROR WHILE DB INSTANCE
    CREATION! CHECK THE XCMDOUT.LOG FILE! ");} SDB: ERROR CREATING DATABASE INSTANCE! Check the XCMDOUT.LOG FILE
    my installing environment:
    OS: windows 2000 server
    RAM: 2G
    JAVA SDK version: 1.4.2_08
    Thanks advance.

    Hi
    Please see this thread of the SDN forum
    SP16 Preview: MaxDB Installation fails (Phase 6)
    Seems some issues with MAX DB ver 7.6
    regards
    rajeshkr

Maybe you are looking for

  • Adobe Photoshop CS2 crashes... please help!

    Photoshop crashes minutes into trying to edit photos.. here is the errors I receive: Any help you can provide is appreciated! Process:     Adobe Photoshop CS2 [324] Path:        /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS

  • Adobe OnLocation won't run after updating to Mavericks

    I use Adobe OnLocation, the reason I bought a Mac, and after upgrading to Mavericks the system hangs everytime I start OnLocation.  I have reinstalled the program numerous times.  After a visit to the "Genius Bar" I decided to wipe the drive clean an

  • Adobe Reader PDF Default?

    How do I make Adobe Reader my default for PDF when I open an attachment in email?

  • Can Premiere Elements 10 edit Photos?

    I just have a quick question. Can Photoshop Premiere Elements 10 be used for photo editing, or is it just for video editing? Message title was edited by: Brett N

  • How to keep the servlet java code the JSP engine generated?

    Hello there!           I am using some JSP in a web application, and would like to take a llok           at the servlet java files th weblogic JSP engine generated.           In my weblogic.properties file I have the following line:           "# Set