SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients  between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

Similar Messages

  • Country key INR is not defined after client copy

    Dear All,
    I'm doing a client copy in my solution manager system.
    Target Client         100
    Source Client        000
    Copy Type           Local Copy
    Profile                 SAP_CUST
    Status                 Successfully Completed
    User                    SAP*
    The log from SCC3 shows that the copy is successful. However, when I'm logged in to client 100 (new client), I have problem assigning the profiles to the user.
    In SU01, when i was assigned the profile (SAP_ALL) to the user, the message says that "Profile SAP_ALL does not exist or is not active".
    so I have use SU21 and reactivate SAP_ALL profile, then SAP_ALL assinged sucessfully
    But when i try to assine SAP_NEW profile to user, message says that "Profile SAP_NEW does not exist or is not active".
    However, when i try creating a new user in SU01, a message box prompted out an warning "Inconsistency with address" and "No default co. address has been maint. in the system. Create an address". When i try to create the address, the entry for "country" does not have any choices and values. If I fill in my entry, the system displayed "country key XXX is not defined"
    Did do something wrong here? Please suggest how to correct this issue
    Regards,
    Ajay

    Dear Mr  karthikeyan,.
    Thanks for your helpful answer.
    As per note 1711620 - use of SAP_NEW is not required for every version change project, no automatic generation takes place
    So its mean that SAP_NEW profile is not required now?
    and as per note 1164216, i have mentioned entries of country code in table T005 and its work.
    Time zone INDIA does not exist-  for that i use the note 198411 and its also work.
    But "Company address could not be created" could you please help[ in this
    Regards,
    Ajay

  • After Client copy - No Authroization Issue

    Dear All,
    Good Day,
    We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
    But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
    "You are not authorized to use transaction XXXX"
    Kindly advice me to resolved this issue.
    Best Regards,
    KSK

    Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

  • TCURM in target client empty after Client Copy

    Hi Experts,
    Has anyone encountered situation whereby TCURM does not contain a record for the target client after Client Copy process is completed? Is this a feature or bug?
    Regards

    Hi ,  I  user the exclude tables option to exclude some tables.
    but I have another problem:  the client copy still failed.  I get these  informations:
    table/object   component                         error
    ANLU           FI-AA-AA                   Field missing locally
    C905            SD-MD-CM                Different Field Names
    IMPTT          PM-EQM-SF-MPC      Field missing locally
    how can i finish my client copy ?   can you give me the solution
    thanks very much

  • Unable to find product categories after client copy

    Hi all,
    We have copied  clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
    Run transcation BDLS
    created new RFC connections
    changed attributes using the Attributes replace report
    created new distributon model
    maintained CRM parameters
    maintained new site attributes in SMOEAC transaction
    maintained entries in table TWPURLSVR
    however , when i try to create a shopping cart,  I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
    however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
    When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
    Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
    Regards,
    Mangesh

    problem solved
    i was using wrong parameters in BDLS

  • Change Myself system in RSA1 trx after client copy

    Hi,
    I have installed SCM 2007 system.
    As post-processing step i have configured myself system in RSA1 trx in the 001 client.
    Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
    Please help.
    Regards,
    Chintan

    HI,
    As logical systems are used to define you can use BDLS to convert them after client copy.
    Go through :Note 325470,325525.
    Thanks.

  • BI-RFC problems after client copy

    Hi all
    Client copy was done and after that when I tried to load data in BW, it ran for long time and finally showed cancelled in SM37. When I checked the source system in RSA1, it gave two messages.
    1.Incorrect IDoc type ZSAC008 in the ALE definition of the source system RSAR373
    2.Result of the destination check: Password logon no longer possible - too many failed attempts RSAR375.
    In long text of message 1 suggestion was to enter IDoc type ZSAB003. In SM30 for Message Type RSSEND Basic Type ZSAB003 Release field is empty. Is this error because of this?  After client copy is there a way to restore the settings back to how it was set initially in the development server? Basis told ALEREMOTE & BIWREMOTE are not blocked. What is missing here? Thanks a lot in advance. 
    Subin

    There are a few things need to be performed on basis side after copy .
    1. Restore of Logical system.--> check with Baisis team wheather they have performed this action or not after copy.
    2. Check your source system connection, in rs1-- source sytem --check
    3. Change the aleremote or Bwremote passwords.
    4. Try to logon to your sourcesystem ( from SM59 Tcode) Remote logon.
    Hope this helps.
    Regards,
    Reddy
    Edited by: Reddybl on Apr 1, 2010 11:56 AM

  • AFAB: Runtime Error after client copy.

    Hi all,
    I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC -   The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
    I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
    I've check the number range in FBN1 and have verified that the range is correct.
    Any advice as to how I can solve this problem?
    Thank you.
    Regards.
    p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
    p/s 2: the standard SQL that is having this problem is "INSERT COBK  FROM TABLE COBK_INS."
    Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

    Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
    Issue solved.

  • Roles are not found after client refresh

    Dear Friends,
    Yesterday night i had refreshed our 210 client by 220 client in same system by using SCCL Transaction code by logging into target system. I got message as client copy completed successfully. For that i choose profile SAP_CUST.(Because requirement is they need all customization data only).
    But after this activity i observe that all user present in system, but some roles are not fount which was present before.
    So users face authorization issue.
    So please help.
    What are post activity after client copy?
    Thanks,
    Regards,
    Sachin

    when you mean "the contact is still in the Address Book" you mean you can see in the list on the left hand side column? but you just cannot see it if you search for it via the search field. is that correct?
    i have had issues with syncing contacts added to my iphone, in these instances the contact or the info added to the existing contact would not flow through to the mac's AB. I solved this by doing a reset of the iphone in itunes and then syncing again, and from then on things started to work.
    also there is an option in itunes in the info pane that let's you select which group a contact is added to on the iphone, if indeed you have and use groups in AB, and of course which groups you would liked synced if you decide not to sync all contacts. you may want to check that these settings are correct and do not somehow screw up a contact added top iphone during the sync... just an idea.
    hop this helps

  • PS CS4 will not open after carbon copying drive to new SSD on MacPro

    PS CS4 will not open after carbon copying drive to new SSD on MacPro. Pop-up windows inform me that the scratch disk is not available. I would appreciate any advice on how to rectify this problem.
    Thanks
    marco

    Thanks avanishdivya.
    I was hoping to avoid that route, but guess it's all I can do.
    Thanks for your quick response.
    Do you know if it is a Carbon Copy Cloner issue or just the way Adobe sets it up?
    For future reference, where should the scratch disk reside? I heard it should not be on the boot drive?
    marco

  • Background jobs pointing to old client after client copy

    Hello
    We have recently completed system refresh from PROD system to TEST system.
    We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
    But all these jobs are pointing to old client only. We have deleted old client.
    Hence all these jobs get cancelled.
    How shall I change the client of all the jobs from old to new one.
    -Nandu More

    Please check the thread:
    Error in Background Jobs After Client Copy
    Check some of the TBT* tables.

  • Materials not getting replicated after Client Copy

    Hi,
    We are having classic scenario and we did a client copy on MM and SRM side. After completing the client copy we are not able to replicate the materials that already exist in MM to SRM which we were able to copy in earlier client.
    Pls advice what are the things we need to check.
    -Satya

    Hi,
    Please check the document "Set Up, Transport, and Copy SRM Server 5.5".
    http://service.sap.com/srm-inst
    SRM Server 5.5 -> Set Up, Transport, and Copy SRM Server 5.5
    Regards,
    Masa

  • SWN_SELSEN not working in test client after client-copy

    Hi all,
    We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items.  Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
    Please advise how to make report SWN_SELSEN back to work in test client.  Thanks.
    << Additional information >>
    (1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only.  After this, some entries were written to above tables.  But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
    (2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only.  It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1.  However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
    I think there may be something else missing, like the timestamp of delta.  Please help.
    Regards,
    Donald

    Hello,
    I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
    What is SWN_SELSEN_TEST?
    Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
    regards
    Rick Bakker
    hanabi technology

  • Material Master and CMIR Texts not copied after Client Copy

    Hi All,
    We had a scenario wherein we had to copy our production client and create a new client (Preproduction). When we performed the client copy, i see that the texts maintained in material master (sales text) and Customer material info record are not not copied into the new client.
    Can somebody suggest me a way out for this..
    Thanks and Regards
    Bhushan

    Hi All ,
    Closing this thread as the same have got copied into the new client after recopying..
    Regards
    Bhushan

  • SAP_ALL & SAP_NEW profiles not available in new client after client copy

    I am setting up a BI Client and have been following some documentation to do this downloaded from SDN. In the process, i created my client 'client 200' assigned to a logical system then doing client copy from 'client 000' using transaction SCCL. There is a step when i now have to create a user in the new client (client 200 ) where i am supposed to assign the user to profiles SAP_ALL and SAP_NEW. Unfortunately these are not available in my newly set client but in 'client 000' they are available.
    Did i make some error in the client copy process or i still need to do something to have the profiles in 'client 200'. Please assist.

    There is no issue in rerunning the Client Copy.
    But please check what mistake you made in the first one.
    Here are the steps.
    Create an entry in SCC4.
    RZ10 modify parameter login/no_automatic_user_sapstar=0
    Check that you have enouf background and dialog processes.
    Restart the sap system
    then login with SAP* in the Client you made.
    Run Sccl and give the Profile SAP_All
    Select the source Client as 000
    and Source Client user Master as 001
    Check tthat you dont select the check box of TEST MODE.
    and schedule in backgreond.
    Thanks Rishi Abrol

Maybe you are looking for