SAP not getting up?
Hi Friends,
We have one development system on windows platform database is Oracle 9i.
When we are going to startsap from MMC it is getting started and after 2 minutes
disp+work getting stopped.
In trans.log also i am unable to see any error. schema is correct and nothing show in trans.log.
But in syslog it is whowing error
RSPO versus DD mismatch TSP01-RQO1NAME leng
Spooler failed return code 0001 and temse failed return code 0001
When iam gooing to that particular table TSP01 i saw so many spool requests was stored in that.
Can you suggest me in this case if i need to delete those entries from TSP01.
Sorry for not posting logs as i did not get any error message in logs.
And R3trans -d and -x is giving 0000 no issue in connecting database.
And With suggetions from SAP people i have applied latest kernel...But same issue is there.
And please find the dev_disp trace below..
trc file: "dev_disp", trc level: 1, release: "640"
Thu Dec 11 14:20:26 2008
kernel runs with dp version 133(ext=102) (@(#) DPLIB-INT-VERSION-133)
length of sys_adm_ext is 312 bytes
sysno 00
sid PAD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 155
intno 20020600
make: multithreaded, ASCII
pid 3212
***LOG Q00=> DpSapEnvInit, DPStart (00 3212) http://dpxxdisp.c 1100
shared lib "dw_xml.dll" version 155 successfully loaded
shared lib "dw_xtc.dll" version 155 successfully loaded
shared lib "dw_stl.dll" version 155 successfully loaded
shared lib "dw_gui.dll" version 155 successfully loaded
shared lib "dw_mdm.dll" version 155 successfully loaded
Thu Dec 11 14:20:32 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 3896
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >ndelntx5_PAD_00 <
DpShMCreate: sizeof(wp_adm) 14904 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 768000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04AA0040, size: 3249736)
DpShMCreate: allocated sys_adm at 04AA0040
DpShMCreate: allocated wp_adm at 04AA17D8
DpShMCreate: allocated tm_adm_list at 04AA5210
DpShMCreate: allocated tm_adm at 04AA5238
DpShMCreate: allocated wp_ca_adm at 04CEA278
DpShMCreate: allocated appc_ca_adm at 04CEE8C8
DpShMCreate: allocated comm_adm_list at 04CF0038
DpShMCreate: allocated comm_adm at 04CF0050
DpShMCreate: allocated vmc_adm_list at 04DAB850
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DAB878
DpShMCreate: allocated wall_adm at 04DAB880
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 249 blocks reserved for free list.
ES initialized.
Thu Dec 11 14:20:35 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( ndelntx5) http://dpxxdisp.c 10036
Thu Dec 11 14:20:36 2008
DpStartStopMsg: send start message (myname is >ndelntx5_PAD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1025
DpMsgAdmin: Set patchno for this platform to 155
Release check o.K.
Thu Dec 11 14:21:36 2008
ERROR => W8 (pid 3344) died http://dpxxdisp.c 12562
ERROR => W9 (pid 3352) died http://dpxxdisp.c 12562
ERROR => W10 (pid 3360) died http://dpxxdisp.c 12562
ERROR => W11 (pid 3368) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W14 (pid 3388) died http://dpxxdisp.c 12562
ERROR => W17 (pid 3412) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0xbd --> 0x9d
Thu Dec 11 14:21:56 2008
ERROR => W0 (pid 3280) died http://dpxxdisp.c 12562
ERROR => W1 (pid 3288) died http://dpxxdisp.c 12562
ERROR => W2 (pid 3296) died http://dpxxdisp.c 12562
ERROR => W3 (pid 3304) died http://dpxxdisp.c 12562
ERROR => W4 (pid 3312) died http://dpxxdisp.c 12562
ERROR => W5 (pid 3320) died http://dpxxdisp.c 12562
ERROR => W6 (pid 3328) died http://dpxxdisp.c 12562
ERROR => W7 (pid 3336) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x9d --> 0x9c
ERROR => W12 (pid 3376) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W13 (pid 3380) died http://dpxxdisp.c 12562
ERROR => W15 (pid 3396) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W16 (pid 3404) died http://dpxxdisp.c 12562
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed http://dpxxtool.c 2507
killing W1-3288 (SIGUSR2)
ERROR => DpWpKill(3288, SIGUSR2) failed http://dpxxtool.c 2507
killing W2-3296 (SIGUSR2)
ERROR => DpWpKill(3296, SIGUSR2) failed http://dpxxtool.c 2507
killing W3-3304 (SIGUSR2)
ERROR => DpWpKill(3304, SIGUSR2) failed http://dpxxtool.c 2507
killing W4-3312 (SIGUSR2)
ERROR => DpWpKill(3312, SIGUSR2) failed http://dpxxtool.c 2507
killing W5-3320 (SIGUSR2)
ERROR => DpWpKill(3320, SIGUSR2) failed http://dpxxtool.c 2507
killing W6-3328 (SIGUSR2)
ERROR => DpWpKill(3328, SIGUSR2) failed http://dpxxtool.c 2507
killing W7-3336 (SIGUSR2)
ERROR => DpWpKill(3336, SIGUSR2) failed http://dpxxtool.c 2507
killing W8-3344 (SIGUSR2)
ERROR => DpWpKill(3344, SIGUSR2) failed http://dpxxtool.c 2507
killing W9-3352 (SIGUSR2)
ERROR => DpWpKill(3352, SIGUSR2) failed http://dpxxtool.c 2507
killing W10-3360 (SIGUSR2)
ERROR => DpWpKill(3360, SIGUSR2) failed http://dpxxtool.c 2507
killing W11-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed http://dpxxtool.c 2507
killing W12-3376 (SIGUSR2)
ERROR => DpWpKill(3376, SIGUSR2) failed http://dpxxtool.c 2507
killing W13-3380 (SIGUSR2)
ERROR => DpWpKill(3380, SIGUSR2) failed http://dpxxtool.c 2507
killing W14-3388 (SIGUSR2)
ERROR => DpWpKill(3388, SIGUSR2) failed http://dpxxtool.c 2507
killing W15-3396 (SIGUSR2)
ERROR => DpWpKill(3396, SIGUSR2) failed http://dpxxtool.c 2507
killing W16-3404 (SIGUSR2)
ERROR => DpWpKill(3404, SIGUSR2) failed http://dpxxtool.c 2507
killing W17-3412 (SIGUSR2)
ERROR => DpWpKill(3412, SIGUSR2) failed http://dpxxtool.c 2507
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:06 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Dec 11 08:52:06 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3280 Ended no 1 0 0
1 DIA 3288 Ended no 1 0 0
2 DIA 3296 Ended no 1 0 0
3 DIA 3304 Ended no 1 0 0
4 DIA 3312 Ended no 1 0 0
5 DIA 3320 Ended no 1 0 0
6 DIA 3328 Ended no 1 0 0
7 DIA 3336 Ended no 1 0 0
8 DIA 3344 Ended no 1 0 0
9 DIA 3352 Ended no 1 0 0
10 UPD 3360 Ended no 1 0 0
11 UPD 3368 Ended no 1 0 0
12 ENQ 3376 Ended no 1 0 0
13 BTC 3380 Ended no 1 0 0
14 BTC 3388 Ended no 1 0 0
15 BTC 3396 Ended no 1 0 0
16 SPO 3404 Ended no 1 0 0
17 UP2 3412 Ended no 1 0 0
Dispatcher Queue Statistics Thu Dec 11 08:52:06 2008
===========================
--------++++--
+
Typ now high max writes reads
--------++++--
+
NOWP 0 3 2000 10 10
--------++++--
+
DIA 6 6 2000 6 0
--------++++--
+
UPD 0 0 2000 0 0
--------++++--
+
ENQ 0 0 2000 0 0
--------++++--
+
BTC 0 0 2000 0 0
--------++++--
+
SPO 1 1 2000 1 0
--------++++--
+
UP2 0 0 2000 0 0
--------++++--
+
max_rq_id 15
wake_evt_udp_now 1
wake events total 11, udp 8 ( 72%), shm 3 ( 27%)
since last update total 11, udp 8 ( 72%), shm 3 ( 27%)
Dump of tm_adm structure: Thu Dec 11 08:52:06 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 11 08:52:06 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id owner pid eyecatcher
--------++--
+
0 DISPATCHER -1 WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:11 2008
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >ndelntx5_PAD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2564) (SOFT_KILL)
Stop icman
killing process (3272) (SOFT_KILL)
Terminate gui connections
DpProcDied Process lives (PID:2564 HANDLE:424)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:12 2008
NiISelect: TIMEOUT occured (1000 ms)
Thu Dec 11 14:22:13 2008
DpProcDied Process lives (PID:2564 HANDLE:424)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:14 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process died (PID:2564 HANDLE:424)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:15 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:16 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:17 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:18 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:19 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:20 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:21 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:22 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process lives (PID:3272 HANDLE:420)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 11 14:22:23 2008
NiISelect: TIMEOUT occured (1000 ms)
DpProcDied Process died (PID:3272 HANDLE:420)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >ndelntx5_PAD_00 <)
NiIMyHostName: hostname = 'ndelntx5'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 344 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek successful for hdl 3 / socket 344 (r)
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Thu Dec 11 14:22:24 2008
NiIPeek: peek for hdl 3 / socket 344 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 10293
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/18
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 21)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 344
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3212) http://dpxxdisp.c 8764
Good Bye .....
After diognosis of our system we came through one issue related to characterset.
One of our ABAPer chagned the characterset of R3TR DOMA CHAR20 and CHAR30 objects with accesskey.
These objects are related to data dictionary. Now when we are going to startsap it is showing that there is a mismatching in RSPO and DD.....Now the thing is can we revert back those objects with default values. And please note that our SAP system is still down and we cant change at GUI level. If is there any chance we can at database level itself. And one more thing....can we export those related tables from any other system...if yes plese let me know how it will possible?
Error is:
ERROR => TSP01-RQO1NAME : length 20 <-> 100. http://rspoini.c 533
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
Please suggest.......
Thanks in advance
Harish K Reddy
Hi all,
Please find the dev_W0 and dev_W8 logs below:
dev_w0:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Dec 11 16:20:35 2008
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.142)
B New connection 0 created
M sysno 00
M sid PAD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, ASCII
M pid 3368
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3368) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 14904 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BA0040, size: 3249736)
M DpShMCreate: allocated sys_adm at 06BA0040
M DpShMCreate: allocated wp_adm at 06BA17D8
M DpShMCreate: allocated tm_adm_list at 06BA5210
M DpShMCreate: allocated tm_adm at 06BA5238
M DpShMCreate: allocated wp_ca_adm at 06DEA278
M DpShMCreate: allocated appc_ca_adm at 06DEE8C8
M DpShMCreate: allocated comm_adm_list at 06DF0038
M DpShMCreate: allocated comm_adm at 06DF0050
M DpShMCreate: allocated vmc_adm_list at 06EAB850
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06EAB878
M DpShMCreate: allocated wall_adm at 06EAB880
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 11 16:20:37 2008
M calling db_connect ...
C Prepending I:\oracle\PAD\920 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C
C Thu Dec 11 16:20:40 2008
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPAD's password
C Connecting as /@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Attaching to DB Server PAD (con_hdl=0,svchp=0938AC64,svrhp=04B85664)
C
C Thu Dec 11 16:20:41 2008
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now '/@PAD' is connected (con_hdl 0, nls_hdl 0).
C Got SAPPAD's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0938AC64,usrhp=04B8E274)
C Now I'm disconnected from ORACLE
C Connecting as SAPPAD/<pwd>@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now 'SAPPAD/<pwd>@PAD' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance pad is running on NDELNTX5 with ORACLE version 9.2.0.8.0 since 20081211
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081211 162037 NDELNTX5
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Dec 11 16:20:42 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 09650040, size: 20000768)
M SHM_ROLL_AREA (addr: 33B70040, size: 123731968)
M SHM_PAGING_AREA (addr: 0A970040, size: 39845888)
M SHM_ROLL_ADM (addr: 0CF80040, size: 1236040)
M SHM_PAGING_ADM (addr: 0D0B0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0D140040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B
B Thu Dec 11 16:20:43 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 18, CON_ID = -1
B
B Thu Dec 11 16:20:44 2008
B dbtbxbuf: Buffer TABL (addr: 11C200C8, size: 50000896, end: 14BCF4C8)
B dbtbxbuf: Profile: max_objects = 10000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 24043008
B ***LOG BB0=> buffer TABL started with length 50000896 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Buffer TABLP (addr: 14BD00C8, size: 30720000, end: 1691C0C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 15306240
B ***LOG BB0=> buffer TABLP started with length 30720000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0FA800D0, size: 4194304, end: 0FE800D0)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 169200D0, size: 4194304, end: 16D200D0)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 5003 * 40 = 200120
B 4: 2500 * 136 = 340000
B 5: 5003 * 4 = 20012
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 17805 * 256 = 4558080
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 16D300D0, size: 5120000, end: 172120D0)
B ***LOG BB0=> buffer CUA started with length 5000k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B
B Thu Dec 11 16:20:45 2008
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 288 = 288
B 2: 18 * 20 = 360
B 3: 4001 * 40 = 160040
B 4: 2000 * 136 = 272000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 29258 * 128 = 3745024
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 172200D0, size: 4194304, end: 176200D0)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Dec 11 16:20:46 2008
M PfHIndInitialize: memory=<0D20CCC0>, header=<0D20CCC0>, records=<0D20CCF0>
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 992, total = 2096
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 00230040
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 00230490
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 002304C8
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 002304D4
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=J:\usr\sap\PAD\DVEBMGS00\sec, AS=ndelntx5, instanceid=00)
N SsfPseLoad: Downloading file J:\usr\sap\PAD\DVEBMGS00\sec\SAPSYS.pse (client: , key: SYSPSE, len: 1579)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M
M Thu Dec 11 16:20:52 2008
M CCMS: AlMsUpload successful for J:\usr\sap\PAD\DVEBMGS00\log\ALMTTREE.DAT (2219 MTEs).
M
M Thu Dec 11 16:20:56 2008
M ***LOG R19=> tskh_init, rstsi1_init1 ( Temse 000001) [thxxhead.c 1577]
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 095128C0
S *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [rspoini.c 533]
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
S Thu Dec 11 16:20:57 2008
S found processing queue enabled
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
M ***LOG R19=> tskh_init, rspoi_init ( Spooler 000001) [thxxhead.c 1628]
M *** ERROR => -
============----
[thxxhead.c 849]
M *** ERROR => RSPO - Error [thxxhead.c 849]
M *** ERROR => code: 1 RSPOEINTERN Some other internal error [thxxhead.c 849]
M *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => module: rspoini no: 1 line: 535 T100: PO001 [thxxhead.c 849]
M *** ERROR => TSL01: F8T p3: TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M *** ERROR => | No entry in error history | [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: rspoi_init (step 1, th_errno 2, action 3, level 1) [thxxhead.c 9598]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ndelntx5_PAD_00 on host ndelntx5 (wp 0)
M * ERROR tskh_init: rspoi_init
M *
M * TIME Thu Dec 11 16:20:57 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 2
M * MODULE thxxhead.c
M * LINE 9783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3368) [dpnttool.c 357]
dev_w8 log:
trc file: "dev_w8", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Dec 11 16:20:37 2008
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\PAD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.142)
B New connection 0 created
M sysno 00
M sid PAD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, ASCII
M pid 3600
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 8 3600) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 14904 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BA0040, size: 3249736)
M DpShMCreate: allocated sys_adm at 06BA0040
M DpShMCreate: allocated wp_adm at 06BA17D8
M DpShMCreate: allocated tm_adm_list at 06BA5210
M DpShMCreate: allocated tm_adm at 06BA5238
M DpShMCreate: allocated wp_ca_adm at 06DEA278
M DpShMCreate: allocated appc_ca_adm at 06DEE8C8
M DpShMCreate: allocated comm_adm_list at 06DF0038
M DpShMCreate: allocated comm_adm at 06DF0050
M DpShMCreate: allocated vmc_adm_list at 06EAB850
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06EAB878
M DpShMCreate: allocated wall_adm at 06EAB880
X
X Thu Dec 11 16:20:38 2008
X EmInit: MmSetImplementation( 2 ).
X <ES> client 8 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 11 16:20:39 2008
M calling db_connect ...
C Prepending I:\oracle\PAD\920 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C
C Thu Dec 11 16:20:41 2008
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPAD's password
C Connecting as /@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Attaching to DB Server PAD (con_hdl=0,svchp=0938AC64,svrhp=04B85664)
C
C Thu Dec 11 16:20:46 2008
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now '/@PAD' is connected (con_hdl 0, nls_hdl 0).
C Got SAPPAD's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0938AC64,usrhp=04B8E274)
C Now I'm disconnected from ORACLE
C Connecting as SAPPAD/<pwd>@PAD on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04B81028 0938B2A8 0938AD10
C Starting user session (con_hdl=0,svchp=0938AC64,srvhp=04B85664,usrhp=04B8E274)
C Now 'SAPPAD/<pwd>@PAD' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance pad is running on NDELNTX5 with ORACLE version 9.2.0.8.0 since 20081211
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081211 162039 NDELNTX5
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Dec 11 16:20:51 2008
I MtxInit: 8 0 0
M SHM_PRES_BUF (addr: 09650040, size: 20000768)
M SHM_ROLL_AREA (addr: 33B70040, size: 123731968)
M SHM_PAGING_AREA (addr: 0A970040, size: 39845888)
M SHM_ROLL_ADM (addr: 0CF80040, size: 1236040)
M SHM_PAGING_ADM (addr: 0D0B0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0D140040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 8 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 8, WP_CNT = 18, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 11C200C8, size: 50000896, end: 14BCF4C8)
B dbtbxbuf: Buffer TABLP (addr: 14BD00C8, size: 30720000, end: 1691C0C8)
B dbexpbuf: Buffer EIBUF (addr: 0FA800D0, size: 4194304, end: 0FE800D0)
B dbexpbuf: Buffer ESM (addr: 169200D0, size: 4194304, end: 16D200D0)
B dbexpbuf: Buffer CUA (addr: 16D300D0, size: 5120000, end: 172120D0)
B dbexpbuf: Buffer OTR (addr: 172200D0, size: 4194304, end: 176200D0)
M
M Thu Dec 11 16:20:54 2008
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M ***LOG R19=> tskh_init, rstsi1_init1 ( Temse 000001) [thxxhead.c 1577]
S *** init spool environment
S
S Thu Dec 11 16:20:55 2008
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 09488AA0
S *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [rspoini.c 533]
S spool kernel/ddic check: Failed
S using table TSP02F for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
M ***LOG R19=> tskh_init, rspoi_init ( Spooler 000001) [thxxhead.c 1628]
M *** ERROR => -
============----
[thxxhead.c 849]
M *** ERROR => RSPO - Error [thxxhead.c 849]
M *** ERROR => code: 1 RSPOEINTERN Some other internal error [thxxhead.c 849]
M *** ERROR => TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => module: rspoini no: 1 line: 535 T100: PO001 [thxxhead.c 849]
M *** ERROR => TSL01: F8T p3: TSP01-RQO1NAME : length 20 <-> 100. [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M *** ERROR => | No entry in error history | [thxxhead.c 849]
M *** ERROR => -
[thxxhead.c 849]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: rspoi_init (step 1, th_errno 2, action 3, level 1) [thxxhead.c 9598]
M
M Info for wp 8
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M Thu Dec 11 16:20:56 2008
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ndelntx5_PAD_00 on host ndelntx5 (wp 8)
M * ERROR tskh_init: rspoi_init
M *
M * TIME Thu Dec 11 16:20:56 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 2
M * MODULE thxxhead.c
M * LINE 9783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 8 3600) [dpnttool.c 357]
Please suggest....
Thanks in advance
Harish K Reddy
Similar Messages
-
Form not getting displayed in sap b one
I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.
Option Strict Off
Option Explicit On
Friend Class frmEmployee
Private WithEvents SBO_Application As SAPbouiCOM.Application
Private objForm As SAPbouiCOM.Form
Public Sub New()
MyBase.New()
'// set SBO_Application with an initialized application object
SetApplication()
LoadFromXML("frmEmployee.xml")
'LoadFromXML("MySimpleFormxml")
'// Get the added form object by using the form's UID
objForm = SBO_Application.Forms.Item("F_4")
'// Show the loaded Form
objForm.Visible = True
'// Saving the Form as an XML file
'// although it already exist as an XML file
'// it is good for practice
'SaveAsXML(objForm)
End Sub
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
'// connect to a running SBO Application
SboGuiApi.Connect(sConnectionString)
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
End Sub
Private Sub LoadFromXML(ByRef FileName As String)
Dim oXmlDoc As Xml.XmlDocument
oXmlDoc = New Xml.XmlDocument
'// load the content of the XML File
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
oXmlDoc.Load(sPath & "\" & FileName)
'// load the form to the SBO application in one batch
SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
End Sub
Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
Dim oXmlDoc As Xml.XmlDocument
Dim sXmlString As String
oXmlDoc = New Xml.XmlDocument
'// get the form as an XML string
sXmlString = Form.GetAsXML
'// load the form's XML string to the
'// XML document object
oXmlDoc.LoadXml(sXmlString)
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
'// save the XML Document
oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
End Sub
End Class -
Filters not getting passed in MDX query while using SAP BW with OBIEE
Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
RockyHello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky -
Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
AshokHello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy -
CPS parameters are not getting updated in SAP
We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006 due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010 due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram -
Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil -
Solution Manager does not get service definitions from SAP in self diagnosi
Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
RussHi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi -
STDMES field in EDI _DC40 value is not getting reflected in SAP R/3
Hi All,
We have a EDI to IDOC scenario.
In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
Value is not getting populated in SAP.
Could you please provide inputs on this?
Thanks in Advance
Best Regards,
Harleen Kaur ChadhaHi Harleen,
Please check Note SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
Regards,
Vikrant -
SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy
Thank you in advance. I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5). We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program: Installation master sapinst
We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password. Can anyone point me in the right direction on what is wrong? If you need more info let me know.
Thanks,
Erik@ Sven & Markus
Well I have checked all the logs and there are no errors. What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
Here it shows that it completed successfully but in the export directory there isn't data when there should be.
INFO 2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
> IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully has been completed successfully.
See here:
/dev/exportlv 119.25 119.23 1% 16 1% /export
Thanks,
Erik -
Dispacher not getting Started...SAP ECC 6.0 on Win2K3 and Oracle.
HI Experts,
I have installed SAP ECC 6.0 (OS-Win2003sp2 DB-Oracle10g). Installation was successful, I have also logged in and created a user in SU01. But when I restart the system I am not able to up the sapserver. SAP MMC - dispacher is not starting. I have started OracleListener in service.sap and restarted the system. Un-installed and again installedj2sdk1.4.2_12 and restarted the system...No use, still dispatcher is not getting up....Pls find below paster Developer Trace for Dispatcher....
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid PRD
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 2200
Wed Oct 28 09:26:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (00 2200) [dpxxdisp.c 1239]
* shared lib "dw_xml.dll" version 111 successfully loaded*
* shared lib "dw_xtc.dll" version 111 successfully loaded*
* shared lib "dw_stl.dll" version 111 successfully loaded*
* shared lib "dw_gui.dll" version 111 successfully loaded*
* shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Oct 28 09:26:32 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sap_PRD_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2404
argv[0] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1048
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=sap_PRD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Wed Oct 28 09:26:33 2009
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sap_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Oct 28 09:26:34 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Wed Oct 28 09:26:51 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444*
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1063) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2404)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]*
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Wed Oct 28 09:27:13 2009
ERROR => W0 (pid 2412) died [dpxxdisp.c 14441]*
ERROR => W1 (pid 2420) died [dpxxdisp.c 14441]*
ERROR => W2 (pid 2428) died [dpxxdisp.c 14441]*
ERROR => W3 (pid 2436) died [dpxxdisp.c 14441]*
ERROR => W4 (pid 2444) died [dpxxdisp.c 14441]*
ERROR => W5 (pid 2452) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2460) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2468) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2476) died [dpxxdisp.c 14441]*
ERROR => W9 (pid 2484) died [dpxxdisp.c 14441]*
ERROR => W10 (pid 2492) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2500) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2508) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1577
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 28 09:27:23 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 28 03:57:23 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2412 Ended no 1 0 0
1 DIA 2420 Ended no 1 0 0
2 DIA 2428 Ended no 1 0 0
3 DIA 2436 Ended no 1 0 0
4 DIA 2444 Ended no 1 0 0
5 DIA 2452 Ended no 1 0 0
6 UPD 2460 Ended no 1 0 0
7 ENQ 2468 Ended no 1 0 0
8 BTC 2476 Ended no 1 0 0
9 BTC 2484 Ended no 1 0 0
10 BTC 2492 Ended no 1 0 0
11 SPO 2500 Ended no 1 0 0
12 UP2 2508 Ended no 1 0 0
Dispatcher Queue Statistics Wed Oct 28 03:57:23 2009
===========================
--------++++--+
| Typ | now | high | max | writes | reads |
--------++++--+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
--------++++--+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)Hi,
Could you please also paste dev_w0 logs ?
Thanks
Sunny -
Jstart.exe process in sap mmc is not getting started
Hi,
The jstart.exe process of sap mmc (management console/server) is not getting started.
The status for this process is "starting the processes". Need help!
The developer trace is as follows :
trc file: "dev_jstart.7668", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7668
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:03:13 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F Mon Oct 08 10:03:13 2012
F ********************************************************************************
F Java environment properties (C:\usr\sap\SV1\J02\work\jstart.jvm)
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 7652] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 7652] Mon Oct 08 10:03:14 2012
F [Thr 7652] *** LOG => connected to Enqueue Server.
F [Thr 7652] *** LOG => connected to Message Server.
F [Thr 7652] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 1.
F
F Mon Oct 08 10:03:15 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_deployment.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_deployment.out
F stderr : C:\usr\sap\SV1\J02\work\std_deployment.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Deploy_offline started with pid 7968
F ********************************************************************************
F [Thr 7652] *** LOG => Process deployment started (pid 7968).
F
F [Thr 7652] Mon Oct 08 10:03:19 2012
F [Thr 7652] *** LOG => Process deployment stopping (pid 7968).
F
F [Thr 6972] Mon Oct 08 10:03:19 2012
F [Thr 6972] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process deployment stopped (pid 7968).
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 1 completed.
F [Thr 7652] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 2.
F
F Mon Oct 08 10:03:20 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_bootstrap.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F stderr : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Instance_bootstrap started with pid 7952
F ********************************************************************************
F [Thr 7652] *** LOG => Process bootstrap started (pid 7952).
F
F [Thr 7652] Mon Oct 08 10:03:47 2012
F [Thr 7652] *** LOG => Process bootstrap running (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).
F
F [Thr 7652] Mon Oct 08 10:04:10 2012
F [Thr 7652] *** LOG => Process bootstrap stopping (pid 7952).
F
F [Thr 4436] Mon Oct 08 10:04:10 2012
F [Thr 4436] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process bootstrap stopped (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 2 completed.
F [Thr 7652] *** LOG => Starting run level 3.
F ********************************************************************************
F Java process [debugproxy] properties:
F section name : debugproxy
F config file : C:\usr\sap\SV1\J02\exe\dproxy.properties
F node name : Debug_Proxy
F home directory : C:\usr\sap\SV1\J02/j2ee/rdbg.proxy
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F ICM process [icm] properties:
F section name : icm
F config file : C:\usr\sap\SV1\J02\exe\icm.properties
F node name : ICM
F home directory : C:\usr\sap\SV1\J02\work
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F ********************************************************************************
F ********************************************************************************
F Java process [server0] properties:
F section name : ID24836450
F config file : C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F node name : server0
F home directory : .
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : true
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 0.
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\icman.EXE
F arg[ 1] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 2] = -nodeId=1
F arg[ 3] = -f
F arg[ 4] = C:\usr\sap\SV1\J02\work\\dev_icm
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_icm.out
F stderr : C:\usr\sap\SV1\J02\work\std_icm.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process ICM started with pid 7336
F ********************************************************************************
F [Thr 7652] *** LOG => Process icm started (pid 7336).
F
F [Thr 7652] Mon Oct 08 10:04:12 2012
F [Thr 7652] *** LOG => Process icm running (pid 7336).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 1.
F
F Mon Oct 08 10:04:16 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=2
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -DSAPINFO=SV1_02_server0
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=ID24836450
F arg[ 6] = -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F arg[ 7] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
F arg[ 9] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_server0.out
F stderr : C:\usr\sap\SV1\J02\work\std_server0.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process server0 started with pid 7616
F ********************************************************************************
F [Thr 7652] *** LOG => Process server0 started (pid 7616).Hi Ravi,
Thanks for your quick response.
Where do I find the default trace for this?
The server0 process status is "Waiting to start". The developer trace for server0 is as follows :
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7616
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:04:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 7280] MtxInit: 10002 0 2
I [Thr 7280] MPI: dynamic quotas disabled.
I [Thr 7280] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 7280] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 7280] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 7280] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7616
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 7364] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 7280] Mon Oct 08 12:28:13 2012
F [Thr 7280] *** LOG => Command STOP 0 {}.
F [Thr 7280] *** LOG => Result for STOP 0 {}: 0 ok, 00000000.
F
F [Thr 7280] Mon Oct 08 12:28:33 2012
F [Thr 7280] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:28:33 2012
J
J ================================================================================
F [Thr 7280] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 684] Mon Oct 08 12:28:33 2012
M [Thr 684] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 5508
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:28:34 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 500] MtxInit: 10002 0 2
I [Thr 500] MPI: dynamic quotas disabled.
I [Thr 500] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 500] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 500] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 500] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=5508
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4136] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 500] Mon Oct 08 12:29:02 2012
F [Thr 500] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:29:02 2012
J
J ================================================================================
F [Thr 500] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 5068] Mon Oct 08 12:29:02 2012
M [Thr 5068] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7704
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:29:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 4980] MtxInit: 10002 0 2
I [Thr 4980] MPI: dynamic quotas disabled.
I [Thr 4980] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 4980] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 4980] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7704
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4736] *** LOG => SfCJavaVm: abort hook is called. -
SAP Fiori Purchase Order not getting any data & getting a 404 Error Message
Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as LoginHi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas -
SAP BUS2012 Rejection Stop not getting triggered
Hi experts,
I am facing one particular problem. When I am rejecting a PO, by default , REJECTION_START event of BUS2012 is getting triggered, I can see it in SWEL. But when I am cancelling the Rejection REJECTION_STOP event of BUS2012 is not getting triggered. Its not even coming in SWEL(Event trace).What could be the reason as every thing is standard, no custom work.Hi,
That's strange. Where did you get this idea that this event should be created? (Well, I can see it also in SAP documentation.) And are you sure you are doing the rejection cancellation correctly (well, I don't know how many ways there could possibly be..) - the status of PO is changed, etc.?
SWETYPV should not have anything to do with this problem. The event is either created or not. SWETYPV is about how to react to events after they are created.
Are you sure that there is no filter set up in SWELS for the events. Perhaps the event is created but you cannot see it in SWEL due to a filter.
Regards,
Karri -
SAP F&R - Order Proposals not getting generated
Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
PrashantHi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM -
SAP Web Page Composer: Detailed Navigation is not getting built
Hello!
I am new at this forum. At first I´d like to say hello to everybody! :]
Our issue concerns the following:
We started to work mit the Web Page Composer to build websites für our workers. Everything worked fine until the detailed WPC-navigation is not getting built anymore. We have this issue after a portal restart. Every steps to build and publish a website were done the right way.
1. Publish navigation und paste it to the external connector of the role in the form "wpcnavigation:///wpcontent..."
2. Permissions and security zones were set. Even the super admin is not able to see the detaild navigation anymore.
It is still possible to put single webpages to iViews and then to display them in the portal. And every function of the Web Page Composer works fine. The caches are deactivated. I tried to build a new site with new pages and a new navigation but there is the same problem, no detailed navigation is shown in the portal navigation. The role is assigned to a user and he can see the role at the top navigation but when clicking on it no detailed navigation appears, just a blank page.
As I mentioned this iusse appears after a portal restart. What could be the problem?
Thank you in advance!
Best regards
GeorgHello Sandeep!
I created a new role and also did the Initial Configurations but it still does not work. May be there is a problem with the external connector where I connect the WPC navigation with the portal navigation? I know it sounds confusing but is there may be a way I could "reset" the WPC configuration? Because at the moment I tried to merge roles the system saved "some configuration" and started to avoid displaying the detailed navigation. So if could delete/reset/change this configuration, it could be that the navigation will be displayed again? I do not unterstand, if I just use one role and so avoid merging roles it just should work again? Or I am on the wrong way? Hopefully I am not telling bull**** right now! :]
At this moment our system running SAP NetWeaver 7.00 SP18. The patch is only available at least SAP NetWeaver 7.00 SP20. We are probably going to upgrade in october to SAP NetWeaver 7.00 SP23 and then we can update the WPC, too. Our Basis said, I have to wait till october. Before this upgrade no updates will be done.
Thanks for your help so far!
Kind regards!
Georg
Edited by: GBrauer on Aug 30, 2011 9:21 AM
Maybe you are looking for
-
Advacne Payment With Reference to PO
Dear All, i want to make Advacne payment to the Vendor with reference to a PO. How can i do it ?? Cheers
-
GVRP not working on Cisco SG300-28
I have three Cisco SG300-28 switches. I setup a test lab environment with a core (server) switch in Layer 3 mode and the rest are (clients) in Layer 2 mode. As I understand, these switches doesn't support VTP, only GVRP. And GVRP works the same with
-
Is My query is enough to fetch concurrent manager goes INACTIVE NOMANAGER?
Dear Legends, Is the following query is Okay to fetch whenever concurrent manager goes to INACTIVE NOMANAGER status? I have put this in a shell cron so whenever the concurrent goes INACTIVE NOMANAGER it will be firing an alert to the list of mail id'
-
Wanted to know allocated licenses to the existing user
Hi All I wanted to know that which license type is being allocated to which user(s) say for example i have allocated Limited financial license type to user X,Y,Z and accordingly to the other so how can i get the list of such type so that i can reshuf
-
Lossless editing of Canon 60d footage
I'd like to bring some 60d footage into Premiere, cut it, and export it. Is there any way I can do that without having Premiere modify it in anyway? I've tried various settings for the output, but haven't managed it yet. The 60D footage is quicktime