SAP Note 1504204 - TR: Divergences between 941 and Schedule B

We just implemented this note in our Development system and now when I attempt to generate a 941 report, I get a Syntax Error in Program 'RPCTRPU0". Was wandering if anyone else has experienced any problems once this note was implemented?
Thanks,

Hello,
Could you please provide more details on it? Did you perform the manual steps described in this note? If so, the user that you use to create the form fields has authorization to maintain data dictionary? You can check if the fields are created in SFP transaction and also in SE11.
Hopefully this helps.
Kind regards,
Graziela Dondoni

Similar Messages

Any SAP Note for RFC Error between BI and ECC 5.0

Hi..
the RFC Destination between BI and ECC 5.0 is giving errors.
Plz let me know if there is any Support pack or any solution to fix this error.
thanks..

Hi,
pls find the RFC connection details
1 Prerequisites
1.1 User Roles
Use
With the Building Block Connectivity a configuration role for each component is provided to access all transactions relevant for the installation. The following roles are available:
Technical name Description File name for upload
B02_01C B02 - Connectivity Configuration Role (SAP R/3) B02_01C.SAP
B02_03C B02 - Connectivity Configuration Role (SAP BW) B02_03C.SAP
C71_04C B02 - Connectivity Configuration Role (SAP CRM) C71_04C.SAP
B02_04C_SRM B02 - Connectivity Configuration Role (SAP SRM) B02_04C_SRM.SAP
Procedure
Please upload the necessary roles and add them to your user, using transactions PFCG (Role Maintenance).
2 Local Settings
This chapter describes all local settings that are necessary for each component like SAP R/3, SAP SCM, SAP BW, SAP CRM or SAP SRM.
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu Define Client Administration (SAP R/3)
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
Then carry out the following steps:
1. Choose Display  Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
u2022 Automatic recording of changes
u2022 Changes to Repository and cross-client Customizing allowed
u2022 eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code SPRO
SAP R/3
IMG Menu Basis Components (for R/3 Enterprisse: SAP Web Application Server)  Application Link Enabling (ALE)  Sending and Receiving Systems  Logical systems  Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
where XXX is the system name
and NNN is the client.
5. Save your entries.
A transport request for Workbench appears.
6. Select an existing request or create a new request, if necessary.
A transport request for Customizing appears.
7. Select an existing request or create a new request, if necessary.
2.1.3 Assigning Logical System to Client
Use
The purpose of this activity is to make an assignment for the logical system. Skip this activity if a logical system is already assigned to your client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Assign Logical System to Client
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Choose Display ® Change.
3. Confirm the warning message The table is cross client.
4. Select your R/3 client and choose Details.
5. Enter the name of the logical system of your SAP R/3 client.
6. Save and confirm the warning message Be careful when changing the logical system.
7. Choose Back twice.
2.1.4 Creating an RFC User (SAP R/3)
Use
To enable communication between the SAP R/3 back-end system and the SAP SCM System, you have to create an RFC user in the SAP R/3 System.
The RFC user in the application client enables multiple RFC connections. Skip this activity if an RFC User has already been created.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Creating an RFC User (SAP R/3)
Transaction Code SU01
SAP R/3 Menu Tools  Administration  User Maintenance  Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
SAP_NEW
S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
2.3 SAP BW
2.3.1 Define Client Administration
Use
This activity defines changes and transports of the client-dependent and client-independent objects.
Procedure
1. To perform this activity, choose one of the following navigation options:
SAP BW Role Menu Local Settings ® Define Client Administration
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Switch to change mode.
3. Select your client.
4. Choose details.
5. In field Currency enter the ISO-code of the local currency, e.g. USD or EUR.
6. In field Client Role enter Customizing
7. Check the settings for changes and transport of client-specific objects and client-independent object changes
If you want to use the settings made by BC-Sets or manually in other systems (other than BW), u201CAutomatic recording of changesu201D and u201CChanges to Repository object and cross-client Customizing allowedu201D is required.
Result
Client administration has been defined to support the installation using Best Practices.
2.3.2 Defining a Logical System for SAP BW (SAP BW)
Use
In this step, you define the logical systems in your distributed system.
Prerequisites
Logical systems are defined cross-client. Therefore cross-client customizing must be allowed in your client (this can be checked in transaction SCC4).
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Defining a Logical System for SAP BW (SAP BW)
Transaction Code SPRO
IMG Menu SAP Reference IMG  SAP Customizing Implementation Guide  SAP NetWeaver  Business Information Warehouse  Links to other Systems  General Connection Settings  Define Logical System
1. A dialog box informs you that the table is cross-client. Choose Continue.
2. On the Change View u201CLogical Systemsu201D: Overview screen, choose New entries.
3. On the New Entries: Overview of Added Entries screen enter the following data:
Field name Description R/O/C User action and values Note
Log. System Technical Name of the Logical System Enter a name for the logical BW system that you want to create
Name Textual Description of the Logical System Enter a clear description for the logical BW system
4. Choose Save.
If a transport request for workbench and customizing is displayed choose existing requests or create new requests.
If you want to continue with the next activity, do not leave the transaction.
Result
You have created a Logical System Name for your SAP BW client.
2.3.3 Assigning Logical System to Client (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW
Role Menu Assigning Logical System to Client (SAP BW)
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
1. In the view Display View "Clients": Overview, choose Display.  Change
2. Confirm the message.
3. Select your BW client.
4. Choose Details.
5. In the view Change View "Clients": Details, insert your BW system in the Logical system field, for example, BS7CLNT100.
6. Save the entries and go back.
2.3.4 Opening Administrator Workbench
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Modeling  Administrator Workbench: Modeling
Transaction Code RSA1
1. In the Replicate Metadata dialog box, choose Only Activate.
2. If a message appears that you are only authorized to work in client ... (Brain 009) refer to SAP Note 316923 (do not import the support package, but use the description under section Workaround).
2.3.5 Creating an RFC-User (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Creating RFC User
Transaction Code SU01
SAP BW Menu Tools  Administration  User Maintenance  Users
Then carry out the following steps:
1. On the User Maintenance: Initial Screen screen:
a. Enter the following data:
Field Entry
User RFCUSER
b. Choose Create.
2. On the Maintain User screen:
a. Choose the Address tab.
b. Enter the following data:
Field Entry
Last Name RFCUSER
Function Default-User for RFC connection
c. Choose the Logon data tab.
d. Enter the following data:
Field Entry
Password LOGIN
User type System
e. Choose the Profiles tab.
f. Enter the following data:
Field Entry
Profiles SAP_ALL , SAP_NEW and S_BI-WHM_RFC
g. Choose Save.
Do not change the password of this user as it is used in RFC connections.
2.3.6 Define RFC-USER as default (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Role Menu Define RFC-USER as default (SAP BW)
Transaction Code RSA1
SAP BW Menu Modeling  Administrator Workbench: Modeling
1. On the Administrator Workbench: Modeling screen choose Settings  Global Settings.
2. In the Global Settings/Customizing dialog box choose Glob. Settings.
3. On the Display View u201CRSADMINA Maintenance Viewu201D: Details screen:
a. Choose Display  Change.
b. Enter RFCUSER in the BW User ALE field.
c. Choose Save.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

HT4623 My iPad 2 does not say software update between about and usage in gerenal setting anyone know why this is

My iPad 2 does not say software update between about and usage in general setting anyone know why this any help welcome thanks

Keith. Look in settings, general, about. About halfway down the screen is an entry labeled version. If it is anything lower than 5.0, then you wil not get wireless updates. You need to plug your pad into your computer that you set it up with which is running the current version of I tunes to get the update.
When you plug it in to i tunes, be sure to do a backup. Also, the machine will ask if you want to transfer purchases. Tell it yes. This saves your content and purchased apps and music to your iTunes on the computer. When you do the software update, it will then reload that material onto your pad.
If you have taken any pictures on your pad, be sure to upload those to I photo, or whatever photo library you are using so that they are not lost when you do the upgrade.
Once you get to the current version, any future software updates can be done over the air, not requiring you to use the computer. That feature was enabled with version 5. But it is a good idea to do backup and syncs with your computer from time to time.

Exchange rate EURX not calculate exchange rates between USD and GBP

We have set ExRt as following:
Exrt Usage Ref. crcy
EURX EMU EUR
we have "EMU" flag checked also.
We are maintaining exchange rates (EURX) for EUR with all others currencies.
We expected that, if we have a CoCode set in GBP and we post a document in USD, SAP will calculate GBP <->USD from exchange rates EURX(USD/EUR) and EURX(GBP/EUR). It seems to be incorrect because the system is ignoring EURX exchange rates and using "M" GBP-USD exchange rate and this was not expected by us.
Could you please tell me if it is correct to expect SAP calculates USD-GBP Exchange rates from EURX(USD/GBP) Exrate or I am wrong and I need to maintain "M" exchange rates for USD-GBP.
Thanks in advance

Hi,
Please check the following settings :
Go to IMG --> General Settings ---> Currencies ---> Check Exchange Rate types
Select the Exchange Rate Euro and check mark the EMU check box . Save it
Rgds,
Suresh

Notes won't sync between MacBook and iPhone/iPad

I have my MacBook, iPhone (5S), and iPad (Air) all set up to use the same iCloud account but some of the notes won't stay in sync between the MacBook and IOS devices. Both of the IOS devices stay in sync with each other, but changes I add on the IOS devices doesn't sync to the MacBook and changes on the MacBook don't sync to the IOS devices. Any ideas? I am a new Mac user and can't figure this out. I have read many of the related forums and the answer is almost always "they won't sync if the notes aren't in the iCloud folder" but that isn't my problem. The notes are in the iCloud folder but still won't sync.
Any ideas?!

Back up any notes on your Mac that have not been synced to your other devices by opening each note clicking that arrow icon on the bottom right, choosing email this note, then email it to yourself. When you're done, go to System Preferences>iCloud on your Mac, uncheck Notes, restart your Mac, then go back and check Notes again. Then add a new test note on your Mac and confim that it syncs to iCloud now. If so, recreate any missing notes by copying and pasting the text from the emails you sent earlier into new notes created in the iCloud account.

Playcount and other Stats Not Sync'ing up between ITunes and Nano

Anyone know why the playcount and other stats won't sync up between an Ipod Nano and ITunes?
I am trying to get my wife's ipod set up on our shared computer. Using Windows XP, I've created seperate user accounts with seperate libraries both using the latest version of ITunes and things have worked great so far. Songs have transferred, audible works. Yet for some reason the playcount info isn't updating and it is one of the things she really wants to work.
Any thoughts?
PC Windows XP 2 IPods 1 Computer using the seperate user profiles trick.

If you are using manual updating rather than one of the automatic updating preferences, playcounts are not synced back to iTunes from the iPod.
Patrick

Can connect over wlan, but not using ethernet cable between mac and extreme

Hi, I have a brand new Airport Extreme base station. Wireless LAN works well and both my wife's and my Mac can connect to the internet. When I connect the ethernet cable to my macbook, it does not connect to Extreme. Is this a feature or a required change in the setups?
br
Vesa

vesaw, Welcome to the discussion area!
On your MacBook, open System Preferences-> Network preference pane and ensure that Ethernet is enabled.

Kuler not syncing colors properly between web and CC apps?

I just created a new Kuler theme on the web ("Lyft app basics"), and then synced with Illustrator CC (running 17.0.0). For some reason, the theme color values are not showing up properly! I had created a theme a few weeks ago ("dark cocktail bar") and that one is fine. Does anyone have any idea what might be going on? The only thing i can think of is that i copied and pasted hex codes from illustrator and perhaps kuler is having issues with copy/paste?? (the "dark cocktail bar" theme i made using the iOS app)
themes on the kuler website:
themes within illustrator cc:
Thanks for any help!

Figured out the problem. On the kuler website, in edit mode, I needed to highlight the rgb values in order for the theme to default to those values (before I had highlighted CMYK).

Clarification on SAP Note 612132-Stock consistency between serial & MM-IM

In the above Note 612132 SAP Question Number 3 is as under:
Question:
How do I achieve a consistent initial status if I have already (inconsistent) stocks?
Answer:
With the execution of a complete physical inventory under required serialization conditions, all stocks are serialized or existing inconsistencies are corrected.
Can anybody explain the steps to be performed to achieve this consistency.
Regards
Rajkumar Reddy
Edited by: Rajkumar Reddy on Aug 26, 2009 8:51 AM

Hi,
What is the volume of data you copied. Also have you followed the best practice of minimal/no activity in the source client.
The dictionary differences seems to be becuase of some SPs not applied in your ECP system yet
Regards,
Sanujit

Not getting the Link between GEIL and material type: procured material not

Hi Friends,
Some material corresponding to certain G/L Account numbers are not appearing. From Fagll03 I can check the G/L Account number, but how shall be able to get the corresponding table field which holds the material or to check whether that G/L Account number has been properly linked to the material.
Please suggest what to do. Is this a problem of programming ? or ...
Thanks,
Saheli

Hi Saheli,
Link b/n GL accounts and Material is in this way.
Material is created based on material type and material type is connected to Valuation class via Account category reference.
Now that for each valuation class corresponding GL accounts are defined in customizing.
you can check the same in Tcode# OBYC.
To check the posting to Inventory account during GR, select BSX (Inventory posting) and check whether the corresponding valuation class has got the assignment with GL accounts or not.
Hope this help you out.
BR,
Krishna

ICloud not syncing new events between iMac and ipad2

can't get new events in ical to sync

I have the same issue with my New Ipad. My iPhone 4S updates to iCloud and I can even see the documents in
settings-> iCloud -> Storage and backup -> manage storage -> Pages on my ipad, but pages won't sync with the documents on iCloud.
I have done everything also, deleted all iWork apps, restored ipad, renamed documents on iCloud, deleted documents and uploaded to iCloud and nothing works. Use iCloud is on in all app settings and documents and data is on in iCloud settings.
Have not yet found any solution, please help, it is very frustrating to have to copy to Dropbox every time I make changes...

Not all ibooks syncing between ipad and iphone

I am trying to sync about 1500 ibooks from my ipad mini to my iphone 6 but it will only sync about 1400. I transferred all purchases from my mini to itunes and then synced my iphone but certain ibooks will appear then disappear or will only open to a blank white screen then disappear. Not sure what happen or how to fix this. All started happening after ios8.

On your phone go to Settings>Mail,Contacts,Calendars>Default Account (in the Contact section). If you have this setting, make be sure you have selected iCloud as your default account and not something else like On My iPhone, Google, Yahoo, an Exchange account, etc. If iCloud is not selected, make this change then add a new test contact and see if it appears in your contacts on icloud.com and your other devices now.
If you don't have the Default Account setting, or if it is set to iCloud but new contacts added to your phone still aren't appearing on icloud.com, add any missing contacts from your phone to your contacts on icloud.com. Once the contacts on icloud.com are up to date, go to Settings>iCloud, turn Contacts off, choose Delete from My iPhone when prompted (they will still be in iCloud), then after a few seconds turn Calendars back on. Then add a new test contact on your phone and see if it appears on your calendar on icloud.com and your other devices now.

Why RIM is not providing a bridge between Blackberries and Entourage ?

If Nokia can do it, I do not understand RIM is not on the edge.

Probably 3 reasons:
1) The number of Mac users who also own Nokia phones makes it worthwhile, whereas the number of Mac users who also own Blackberries, doesn't.
2) Nokia phones use an industry standard syncing protocol already built right in to iSync, making it a relatively easy task to add support for their handsets via a simple iSync Plugin. No such mechanism exists for Balckberries.
3) It was Microsoft that added SyncServices support in Entourage, allowing data to be easily synced with iSync supported devices. Microsoft haven't added such support for the Blackberry.

Whats the difference between Template and Schedule?

Hi BPC Gurus,
I have created a dynamic template and added in the wizard but I am not sure whether it can be used as Input schedule? So to have clear picture I need your help in understanding the difference between Template & Schedule i.e. .XLT & .XLS.
Regards
KumarMG

Hi Kumar,
Actually in BPC the input schedules and the Reports can be dynamic templates, the differences are not related to the extension of the files, the important thing here is how is configurated the template, to see how is configurated you can go to e-tools> workbook options->a there in the upper left part of the window you can see if it is an input schedule o a Report. The thing is that you can have input schedules with both extensions and both will be working fine,
hope it helps

US - 941 Form - issues with Box 8 and 14 - note 1504204

Dear All,
If you have applied the base Support Package to year End and Form 941 doesn´t present values in Box 8 and 14. Please, apply the following note to solve it:
1504204 TR: Divergences between 941 and Schedule B
Thank you.
Kind regards,
Graziela
Edited by: Graziela Dondoni on Nov 19, 2010 3:54 PM

Good morning , we applied this note into our Development system and we now get a syntax error when attempting to generate form 941 and W2s.
We applied this note to correct the amounts pulled in on this form. Please see my post from Friday the 19th.
Thanks,

SAP Note 1504204 - TR: Divergences between 941 and Schedule B

Similar Messages

Maybe you are looking for