SAP Note 642775

Can anyone provide me with a link to this note. I have searched the site and have been unable to locate it but have seen it referenced in many conversations. I am trying to implement Business Package for Product on EP6.0 2.

Karen,
You will find the information by going to http://service.sap.com/notes and by entering the notenumber 642775
Here is the content of the note:
=========================================================
Symptom
Composite SAP Note for Business Packages as of EP 6.0 SP1 (including SAP NetWeaver '04)
Other terms
NetWeaver content, NW04, NW, SDN, PCP, Portal Content Portfolio, Business Package, Portal content, iView, EP, Enterprise Portal, SP, BP
Reason and Prerequisites
This composite note contains important information for the running of Business Packages on EP 6.0 and SAP NetWeaver '04.
You can find an overview of all EP 6.0 and SAP NetWeaver '04 Business Packages in the Portal Content Portfolio Catalog (PCP) through SDN.
This composite note references more notes on content installation and configuration and preparations for the migration of EP 5.0 Business Packages to EP 6.0 and SAP NetWeaver '04.
Also listed here are all packages and the corresponding notes, where notes that supplement or deviate from the documentation apply. (See: "5 Special Statements for Business Packages").
Solution
Before installing EP 6.0 and SAP NetWeaver '04 Business Packages and/or migrating from EP 5.0 Business Packages to EP 6.0 and SAP NetWeaver '04, consider the following:
Table of Contents
1 Business Packages released for EP 6.0 and SAP NetWeaver '04
1.1 General
1.2 EP 5.0 Business Packages
1.3 EP 5.0 Business Packages with additional language versions
2 Prerequisites for Installation
2.1 EP Platform Release
2.2 JCo Release
3 Preparation for Migration
3.1 EP 5.0 Business Packages
3.2 EP 5.0 Business Packages with additional language versions
4 List of EP Business Packages that will not be released for EP 6.0 and
SAP NetWeaver '04
5 EP 6.0 and SAP NetWeaver '04 Business Packages
6 Related notes on EP Platform and Business Packages
1 Business Packages released for EP 6.0 and SAP NetWeaver '04
1.1 General
As a rule, all Business Packages with release numbers ending in 60.x run on EP 6.0 and SAP NetWeaver '04. There are also several EP 5 packages that have been released for EP 6.0 and SAP NetWeaver '04.
You can obtain a list of all packages released for EP 6.0 and SAP NetWeaver '04 through SDN and the Portal Content Portfolio Catalog (PCP).
http://www.sdn.sap.com/sdn/contentportfolio.sdn
1.2 EP 5.0 Business Packages
The following EP 5.0 Business Packages have been released for EP 6.0 as of SP1 and SAP NetWeaver '04 . (Some are only available as a restricted delivery. See SDN PCP for more information.):
Business Package for Employee Self-Service 4.6C/4.70 50.4 (see SAP Note 687452)
Business Package for Manager Self-Service 50.3 (see SAP Note 649414)
Business Package for Sales Analysis 50.2.1 (see SAP Note 569584)
Business Package for Campaign Management 50.2 (see SAP Note 569584)
Business Package for Market Exploration 50.2 (see SAP Note 569584)
Business Package for Procurement Analysis 50.2 (see SAP Note 569584)
Business Package for Inventory Analysis 50.3 (see SAP Note 569584)
Business Package for Production Analysis 50.2 (see SAP Note 569584)
Business Package for E-Analytics 50.2 (see SAP Note 569584)
Business Package for Banking Industry Queries 50.2 (see SAP Note 569584)
Business Package for CRM Queries 50.2 (see SAP Note 569584)
Business Package for Financial Queries 50.2 (see SAP Note 569584)
Business Package for Automotive Queries 50.1 (see SAP Note 569584)
Business Package for Consumer Products Queries 50.2 (see SAP Note 569584)
Business Package for Oil & Gas Industry Queries 50.1 (see SAP Note 569584)
Business Package for SCM Queries 50.2 (see SAP Note 569584)
Business Package for Supply Relationship Management Queries 50.1 (see SAP Note 569584)
Business Package for Pharmaceuticals Queries 50.1 (see SAP Note 569584)
Business Package for Real Estate Queries 50.1 (see SAP Note 569584)
Business Package for Service Provider Queries 50.1 (see SAP Note 569584)
Business Package for Healthcare Queries 50.1 (see SAP Note 569584)
Business Package for Technical Queries 50.1 (see SAP Note 569584)
Business Package for Utility Industry Queries 50.2 (see SAP Note 569584)
Business Package for HR Queries 50.2 (see SAP Note 569584)
Business Package for Retail Queries 50.2 (see SAP Note 569584)
Business Package for Aerospace & Defense Queries 50.1 (see SAP Note 569584)
Business Package for Customer Credit Management 50.2 (see SAP Note 569584)
The following EP 5.0 Business Packages have been released for EP 6.0 as of SP2 and SAP NetWeaver '04:
Business Package for Asset Finance and Leasing 50.1
Business Package for Collaboration by cFolders 2.0 50.1 (see SAP Note 654012)
Business Package for Learning 50.2
Business Package for SAP Expert Finder 50.2
Business Package for Automotive Suppliers 50.1
Business Package for Subcontracting (ME&C) 50.2
Business Package for Key Account Management for Utilities 50.4
The following EP 5.0 Business Packages have been released for EP 6.0 as of SP2 Patch 1 and SAP NetWeaver '04:
Business Package for Projects 50.3.1 (see SAP Note 660410)
Business Package for Products 50.3.1 (see SAP Note 660410)
Business Package for Assets 50.3.1 (see SAP Note 660410)
Business Package for SAP Asset Services 50.1.1 (see SAP Note 660410)
Business Package for Professional Services 50.2 (see SAP Note 660410)
Business Package for Telco Dealers 50.2
The following EP 5.0 Business Packages have been released for EP 6.0 as of SP2 Patch 2 and SAP NetWeaver '04:
Business Package for Automotive Channel Management 50.1
Business Package for Commercialization (Pharmaceuticals) 50.1
This note will be updated as soon as other Business Packages are released on EP 6.0 or SAP NetWeaver '04.
1.3 EP 5.0 Business Packages with additional language versions
The following EP 5.0 Business Packages have also been released for EP 6.0 as of SP 1 and SAP NetWeaver '04. They have identical functions to the EP 5.0 Business Package release mentioned in brackets and also have the same EP 5.0 package import format, which means that you can find these packages in the ep50.migrated folder after import.
The only difference is the addition of more languages not supported by EP 5.0.
EP 5.0 documentation is also valid for these Business Packages.
Business Package for SAP CRM 3.1 60.1 (based on 50.3.3) (see SAP Notes 659881 and 645986)
Business Package for SAP CRM 4.0 60.1 (based on 50.1.1) (see SAP Notes 659881 and 645946)
Business Package for SAP CRM 4.0 60.2 (based on 50.2.1) (see SAP Notes 659881 and 645946)
Business Package for Manager Self-Service 60.1 (based on 50.4)
Business Package for Customer Credit Management 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for E-Analytics 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Production Analysis 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Inventory Analysis 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Inventory Analysis 60.2 (based on 50.3) (see SAP Note 569584)
Business Package for Campaign Management 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Procurement Analysis 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Market Exploration 60.1 (based on 50.2) (see SAP Note 569584)
Business Package for Sales Analysis 60.1 (based on 50.2.1) (see SAP Note 569584)
2 Prerequisites for Installation
2.1 EP Platform Release
You can find information about the required platform release, including Support Package and Patch Level, in package documentation or in the notes listed above if they are available.
2.2 JCo-Release (not relevant for EP 6.0 and SAP NetWeaver '04 installations on WebAS 6.4 and above)
Download the latest JCO version from http://service.sap.com/connectors.
3 Preparation for Migration
General information about the migration process:
For EP 6.0 SP 2 and SAP NetWeaver '04 and earlier, see
http://help.sap.com/ep > EP 6.0 SP2 >
HTML (English) > Administration Guide > Portal Platform > System
Administration > Transport of Content Objects > Transport Scenarios >
Migrating and Importing EP 5.0 Contents Objects.
From EP 6.0 SP 2 SP3 (including NetWeaver '04), see
http://help.sap.com/nw4/ > Netweaver '04 > English > SAP Library >
SAP Netweaver > People Integration > Portal > Administration Guide >
Portal Platform > System Administration > Transport of Portal Objects >
Transport Scenarios > Import and Deployment > Importing EP 5.0 Packages
The following information is crucial for preparing the migration process of EP 5.0 Business Packages to EP 6.0 and SAP NetWeaver '04.
3.1 EP 5.0 Business Packages
If you are planning to migrate Business Packages from EP 5.0 to EP 6.0 and SAP NetWeaver '04, take into account that in most cases only a lower release of an EP 5.0 Business Package is released on EP 6.0 and SAP NetWeaver '04 - for example Release 50.3 is released, but not 50.2.
You find the Business Package release and the required minimum support package release to be able to use the EP 5.0 Business Package on EP 6.0 and SAP NetWeaver '04 in this note. You can also see which Business Package release has been released for EP 6.0 and SAP NetWeaver '04 using SDN PCP.
Before migrating content make sure that you upgrade your Business Package to the lowest release (50.x) that is released on EP 6.0 and SAP NetWeaver '04.
Some Business Packages are not released on EP 6.0 or SAP NetWeaver '04. Others will be replaced by native EP 6.0 releases in the future. For details see "4: A list of EP 5.0 Business Packages which are not released for EP 6.0 or SAP NetWeaver '04".
3.2 EP 5.0 Business Packages with additional language versions
If you want to make use of the EP 5.0 Business Packages with additional language versions mentioned in 1.3, follow this process:
- Upgrade the Business Package in your EP 5.0 installation to the
release which is released on EP 6.0 and SAP NetWeaver '04.
- Execute Content Migration on EP 6.0 and SAP NetWeaver '04.
- Import the Business Package with additional languages into EP
6.0 and SAP NetWeaver '04.
Personalizing and customizing data is saved in this way.
4 List of EP 5.0 Business Packages that will not be released for EP 6.0 or SAP NetWeaver '04
The following EP 5.0 Business Packages will not be released for EP 6.0 or SAP NetWeaver '04. Supplementary comments are included in brackets:
Business Package for Strategic Enterprise Management (runs in EP 5.0 only, until a native SAP NetWeaver '04 Package is available)
Business Package for Portal Users (see SAP Note 642827)
Business Package for Communication (see SAP Note 640678)
SAP Collaboration Room - general template (see SAP Note 639773)
SAP Collaboration Room - infrastructure (see SAP Note 639773)
SAP Collaboration Room - project template (see SAP Note 639773)
SAP Collaboration Room - session template (see SAP Note 639773)
5 EP 6.0 and SAP NetWeaver '04 Business Packages
641974: Business Package for MDM 2.0 - Portal related prerequisites
568576: Composite SAP note: Manager Self-Service (My team)
690466: Composite note: Business Package for HR Executive Analytics
6 Related notes on EP Platform and Business Packages
668548: Release Restrictions for SAP Enterprise Portal 6.0
674329: Content Migration
640678: Groupware Integration in EP 6.0 and SAP NetWeaver '04
640634: KM Compatibility Package
642827: Portal User Package in EP 6.0
642999: Importfilter
588913: Central note for Import and Export for EP 6.0 and SAP NetWeaver '04
732461: Migration of EP & KM from EP 5.0 to NW '04
574267: Migration of EP & KM from 5.0 SP5 to 6.0 - Central Note
=========================================================
Without the service marketplace ID you wouldn't be able to access any notes info.
Regards
-Venkat Malempati

Similar Messages

SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

Hello Friends ,
After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
- Inbound delivery storage location cannot be changed to here Message no. VLA316
the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
also another error like
- Inbound delivery batch cannot be changed to *** here
which doesn't make any sense because there is not batches in the inbound document !!
i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound indicator at the shipping parameter at client level customization
i need help on how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

Hi,
The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note: 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
Regards,
AKPT

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

Sap note 1507799 - Sec 80CCD - pension contribution notified by central gov

Dear
I have applied the sap note 1507799 - Sec 80CCD - pension contribution notified by central govt. and have done the necessary manual config steps as mentioned in the sap note.
When i am trying to check this pension contribution notified by central govt item in IT0585 and IT 0586.
i am unable to get this item.
Regards
Vish

Hi ,
First do the manual changes & then apply the note. You will get "Contribution to pension scheme of Central Goverment" this option in IT 585
Regards,
Mahesh

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

Doubt in Downloading Sap notes in SNOTE Transaction

Hi Experts,
I want to download the sap note (442831) in my developement system. For that i am using the Tcode SNOTE here i used Goto-->Download Sap Note. I gave my sap note number in that window, then i executed. after few minites its saying downloaded.
After downloading i searched the notenumber in that list but its not displaying.
Why its happening? Plz guide this any otherway is there or i did any wrong things over this??
Plz plz its urgent. Point will be sure.
Thnx,
Mohana

HI,
Once you download the note it will be in NEW list click on it and expand then search the same
if you want to apply the patch then implement the note and finally change the processing status to completed
Regards
Shiva

How do remove commitment value in the PO ? any SAP note avl?

Hi,
Project (WBS)releated service PO (Account assignment category P and Item category D), in which SES,GR,IR have been completed for entire Project services for the year 2005,PO history also updatd for SES, GR,IR in the 2005 only.But Now system is showing still commitment value in the PO for the year 2009?.
Henece how do remove the inconsistency of the commitment value in the PO for the year 2009?. (i.e value is comming from COOI table entry).Is there any SAP NOTEs are available for this case?
Note:
But this case no PR has been refered in the PO. PO has been directly created, and PO QTY,Value changes have not been done after SES,GR,IR completion.
But still system commitment value is showing in the PO for the year 2009, so HOW do remove the value?
i am looking suitable answers.
Regards,
kumar

Hi,
Pre-requisites for a commitment update are:
o In transaction OKKP, the commitment management indicator must be
       active for the given controlling area in the current fiscal year.
The controlling area is the highest organizational unit in Controlling,
however this area is missing from the accounting data of the PO.
o The accounting objects must be active for commitments:
- Work orders: The commitment management indicator must be set
          in transaction KOT2 for the given order type.
- Cost centers: In transaction KS02, in register "Control", the
          commitment update indicator must NOT be set.
- Projects: see note 47992
o In transaction CUNI, the unit of measurements used at item level
       must be set to value based commitment.
Please check the following notes 152571, 634298, 459509 and
772206 carefully and also 165823.
Please check also if the "delivery complete" indicator is set in the PO item (see note 735404).
Usually for service POs the "Delivery completed" indicator will be
hidden and this indicator is fully controlled by the "final entry
sheet" indicator in ML81N. You must allow to set this indicator trough a field selection customizing for your PO item.
Regards,
Edit

Date option in stock reversing program(SAP NOTE 175842)

Hi Gurus,
We have prepared a program with SAP NOTE 175842 for reversing stock posting.My client has done GR in march 09 and quality peoples have posted to unrestricted stock in same month.Now because of some reason stores person want to cancel GR. So we have reversed the posting for the lot in April using the programme.Now when stores person try to cancel GR in month of march system is giving error "Deficit of SL St.in QI prev. 14.800 MT ".Because we have reversed the posting from unrestricted to quality in april and we are trying to cancel GR in March system is giving above error.
Is there any settings such that in stock reversing program we can enter the date, so that on a particular date we can reverse the stock.Because in current situation we can enter lot no. only or is there any other solution to overcome this situation
Regards
Amit

hi amit
Yes system will not allow you to cancel GR for March when Reversal stock posting was done in April.
Because it will consider the status of stock when GR was made.
Which movement type you have used for reversal From Unrestricted to Quality.
Was it the activation of 08 & then 322.
If it is so then cancellation of GR will not take place through original GR document(as it is in unrestricted), It will give error msg if you give reference of same.
Even GR can not be cancelled based on 08 inspection lot as 08 is not wrt PO.
Just asuggetion explore User Exit
QEVA0008 Usage decision: Customer function key (e.g. to cancel UD)
Sujit

What is the new sap note for Ptax slabs of FY 2011-12.

Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.

Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha

Is it possible to force the implementation of a SAP note?

Hi guys,
I am installing SAP CPM, software components CPD 1.0 and PICM 1.0. During the SAINT installation, I hit an error for both components in the ABAP Generation Phase. I have found two notes with automatic corrections (1843317 and 2040519) to fix the errors.
However, when attempting to implement both notes through SNOTE, it shows them as "Cannot be implemented". I am assuming this is because the software components are not fully installed yet.
I know that I can get the correction instructions from each note and manually put them in, but one of the notes has 15+ corrections. Not exactly how I want to spend my day.
Is there a way to force SNOTE to implement a note that is listed as "cannot be implemented"? If not, does anyone have a better way to get the corrections applied besides doing each one manually?
Thanks!
-Jayson

Hi,
Here i would recommend to go for correction instruction instead of searching force implementation of SAP Notes as notes are used to fix bugs under some specific SAP standard codes and affects specific programs even and only recommended if support package still to be provided by SAP.
Also need to check for the supported releases under SAP notes for performing corrections (strictly based or relevant for mentioned releases.)
Hope you will understand and will try to avoid any issues by opting any force methods to implement the SAP Notes.
Regards,
Gaurav

Performance credit master data (FD32)--SAP Note 705317

Hi,
When running the FD32 tranasaction,I am changing the credit account and saving the transaction...it is taking quite a long time and going for dump....TIME_OUT error.
The appropriate notes for this problem are 705317 and 9937.
I shall give the details details of the note.
SymptomLong runtimes occur for the reorganization of credit data in SD documents.
This reorganization can occur in two situation:
- You start report RFDKLI20.
- You create or change credit master data in Transaction FD32.
Reason and PrerequisitesIn the credit management, you change assignments in Customizing or create or change
credit master data. The transfer of the changed settings into existing SD documents
requires a reorganization of these documents.
The reorganization is triggered from Transaction FD32 or using report RFDKLI20. Since
the relevant partner function in the credit management is the payer, all open sales
documents for a payer are selectedfor the reorganization.
The selection is performed within function module SD_CREDIT_RECREATE, which is called
from both Transaction FD32 and report RFDKLI20.
The documents are selected according to one of the two following options:1. Partner index VAKPA
The relevant documents are selected via partner index VAKPA. In index table VAKPA,
the system updates all SD documents for a customer number in dependency on the
partner function. All documents for a payer can be determined using index table
VAKPA.
CAUTION: Partner index VAKPA is only updated if the corresponding partner
functions and transactions are activated in Customizing table TINPA. Table TINPA
does not provide any update for the payer partnerfunction in the standard system!
2. Document table VBPA
If the update for the payer is not active in table TINPA, the relevant documents
are selected via application table VBPA. Table VBPA contains the used partners
(customer numbers) for SD documents.
The access to table VBPA with the customer number of the payer requires a long
SAP Note Nr. 705317 07.02.2008 Page 1
runtime because the customer number is not a key field in table VBPA. It might
result in a TIME_OUT.
Solution
Due to the technical conditions described above, there are two possible solutions for
runtime problems in Transaction FD32 or with report RFDKLI20:
1. Activate the update of index table VAKPA for the payer partner function:
Activate the update of index table VAKPA for the payer partner function by
creating an entry with transaction = 0, partner function = RG in table TINPA. You
can use Transaction SM31 for that.
Subsequently, a reorganization of index table VAKPA is absolutely required!! You
can execute the reorganization with report RVV05IVB. Note that all existing SD
documents thus also those ones already closed are indexed again by this report.
Depending on the number of your documents in the system, this can result in a
runtime which is correspondingly long. Therefore test this beforehand in a copy of
your production system!
2. Create a database secondary index for table VBPA:
If a reorganization of index table VAKPA is not possible or not wanted, you can
optimize the access via document table VBPA. For that, create a database secondary
index for table VBPA.
We cannot provide a general recommendation on how you have to define the secondary
index in detail. This basically depends on your dataset.
Use the SQL trace with Transaction ST05 in order to analyze the access onto table
VBPA within function module SD_CREDIT_RECREATE. Then define a suitable database
secondary index for table VBPA according to your analysis results.
For example, you could create the secondary index for VBPA fields KUNNR and PARVW.
Test the new secondary index by creating an SQL trace with Transaction ST05 again
in order to check the effectiveness of the database access and the runtime.
Also take the related notes into account.
Use Note 99937 to avoid the automatic reorganization - and thus runtime problems - in
Transaction FD32. Note that this does not solve the runtime problem during the
reorganization in general, but shifts it to RFDKLI20 which you can schedule as a job.
Thus, you are not disturbed by the runtime problem.
Please can anyone help me as to in which table and what fields i need to take to create secondary index.Thank you,
madhu.

Hi
Instead of creating Indexxes u contact basis to increase the the time limit for the execution
Regards
Shiva

ERROR while checking standard program for SAP NOTE 175482(QM)

HI,
experts
i am implementing sap note 175842 QM MODULE .
My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
but in se38 report comes like this
REPORT RQEVAC50.
REPORT RQEVAC50 MESSAGE-ID QA.
so while checking error comes boz 2 report hedaing is there .
I WANT TO DELETE FIRST ONE BUT IT CANT.
I chose activate anyway but while releasing request it gives error.
THANKS
AJAY.

hi
error is 'OBJECT REPS RQEVAC50 does not exit create it'**
I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
THATS THE MAIN PROBLEM.
Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
so there are 2 report hedaing .
THANKS
AJAY.

BSP error while adding an SAP Note to my Favorites list...

Hi,
I have an SAP Service user-id(service.sap.com market place user id).
Once after finding the required SAP Note for my issue I am trying to add that SAP Note to my favorites list.
But system is issueing a BSP page error as follows. Can you please tell me how to add an SAP Note to your favorites list...
===================================
Business Server Page (BSP) Error
What happened?
Call of BSP page terminated due to error.
Note
Following error text processed in system:
An exception with the type CX_SY_RANGE_OUT_OF_BOUNDS occurred, but was neither handled locally, nor declared in a RAISING clause
Exception Class CX_SY_RANGE_OUT_OF_BOUNDS
Error name STRING_OFFSET_TOO_LARGE
Program CL_O29E2JGD0M2HLPZ4ERRFVYKRX1RCP
Include CL_O29E2JGD0M2HLPZ4ERRFVYKRX1RCM009
ABAP Class CL_O29E2JGD0M2HLPZ4ERRFVYKRX1R
Method _ONINPUTPROCESSING
BSP Application /SPN/FAVORITES
BSP Page ADD_LINK.HTM
Row 114
Long Text -
Error Type: Exception
Your SAP Business Server Pages Team
===========================================
Thanks in advance...
Regards,
Bharat.

Hi,
It is a one-time error or do this occurs each time ?
Did you choose a really long name or something (the "String offset" description tends to prove it has to deal with some string length) ?
Otherwise, open an OSS message.
Best regards,
Guillaume

Stack Dump while creating Write Optimized DSO on BW 7.3, MS SQL - any SAP Notes?

While attempting to create a Write Optimized DSO on BW 7.3, MS SQL, we had a stack dump - ABAP Program CL_RSD_ODSO_VERS==============CP with short text " Access using NULL object reference is not possible. "
Has anyone seen any SAP Notes on this subject?

Hi John,
Was any field deleted from the DSO, if yes, probably the system is not able to relate the pointer from the DSO table. Error like these come up very often when fields are deleted from DSO. Solution is to remove the field manually from the table also. However, the system is supposed to do but sometimes such ambiguity causes such issues.

SAP Note 0001370334: Error while deploying EAR file

Hi All,
We have a project requirement where payload should not be visible in both IE(SXMB_MONI) and RWB(Channel Monitoring). We have followed sap note 0001370334 and created .ear file as per sample .ear file given in the sap note.
Here the problem is when we are trying to deploy that .ear file using NWDS, it is throwing exception :
[ERROR CODE DPL.DCAPI.1027] SduLoadingException.
Additional information: 'The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
Kindly provide ur inputs.
Thanks,
Veneela

Did you see this link? Looks like your ear file is not as expected. Please delete and create and deploy again
http://wiki.sdn.sap.com/wiki/display/JSTSG/%28JSTSG%29%28Deploy%29Problems-P29
/thread/1516905 [original link is broken]

SAP Note 642775

Similar Messages

Maybe you are looking for