Sap Note:792372 Implement?

Hi,
My name is Samad Farooq.
Has any one implemented the SAP note:792372, by the name of kp97 cumalative copying. It is used to add two versions of planning from source to target.
I had implemeneted this note, but cannot see any changes. Can any one help me
how to see the changes or to administrator the note. when i implmented it prompeted with green lamps this indicates it had sucessfully implemented..but why i can see the changes.
Looking to hear from u all..
thanking you all for ur time.
Samad Farooq

Hi,
those Suggested SAP Notes are the prerequisites for Implementing your expected SAP Note. You will see the corrections list in that SAP Note, once you traverse that listed corrections, you will come to know about some prerequisite SAP Notes, which need to be applied along with the SAP Note, which you are going to implement.
The SNOTE will suggest you the list of other valid and required prerequisites/dependent SAP Notes, which will be downloaded and applied in one run along with that SAP Note. you can not ignore them. Before you implement the SAP Note, read the prerequisite SAP Notes carefully.
Refer [this link1 |http://help.sap.com/saphelp_nw04/helpdata/EN/60/8def3981fe5d7de10000000a114084/content.htm] and [link2|http://help.sap.com/saphelp_nw04/helpdata/EN/c3/0db13a95bed348e10000000a114084/content.htm] to get more information about such situation.
Regards,
Bhavik G. Shroff

Similar Messages

SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT

Hello Experts,
I need to implement the FM CONVERSION_EXIT_MATN2_OUTPUT ( + Conversion routine MATN2 ) in our SAP system version 4.7. Can anyone tell me if there are any specific SAP note for implementing it.
Note: Our SAP system dont have DI software component. I want to implement the FM without going for DI.
Awaiting reply,
Thanks,
Balaji
Edited by: Balaji on Jan 19, 2009 11:59 AM
Edited by: Balaji on Jan 19, 2009 1:02 PM

Thanks.

SAP Note de-implementation process

Hi ALL,
I just want to know the process of de-implementing an SAP Note, which might have several dependent SAP Notes installed as a pre-requisite. What I mean is; Say If i implement an SAP Note A, before system implements the SAP Note A it will load SAP Note B as a pre-requisite. How can we de-implement all of them successfully ?
BR
Tanmoy

Hi ALL,
I found the following extract in SDN wiki:
It may happen that you try to de-implement an SAP note via T-cd:SNOTE > u201CSAP Noteu201D > u201CReset SAP Note Implementationu201D, but finally you find that it does not work or fails with error.
It is not recommended to de-implement any SAP note which has been already implemented completely. The reason is that even you de-implemented it now, the corrections would be implemented sooner or later again by corresponding support package implementation in the future.
If you want to de-implement any SAP note, please donu2019t do it yourself. Please contact SAP support. SAP will judge whether it is really necessary to de-implement the SAP note or not, and de-implement it for you in necessary.
SAP is developing new tool to replace Note Assistant. De-implementation function is not to be integrated into this new tool, which means that it will be impossible to de-implement any already-implemented SAP note using the new tool.
BR ,
Tanmoy

Need for Sap Notes Downloads & implement

Now for upgrade from 4.6B to CC 6 ,if note/notes for corresponding object in SPAU list is/are not present under Note Corrections root...Do we have to download it and then implement it ...IF yes then how does it get implemented for that particular object..is it automatically done or do we have to give Object Name and its details anywhere..Please do explain and elobarate on it.

yes..you are right..
OSS note automatically implements .. you need not give any object details...
to download and implement ..
use tcode SNOTE.
click on download button ..then enter required note number ..after download it'll be stored in 'New' tab... place cursor on note number then press 'F8'( execute button).
It automatically implement note..and creates transport request as well...

Implementing of SAP Note 657999 - Error during Bring the gateway resource

Hello all.
During SAP note 657999 Implementation, pass 10, item F, The note says to bring the gateway resource SAPGW<SID> in online status. The "SAP GATEWAY Resource" tried to stay in online, but after a few seconds, the resource showed status "failed".
In folder "C:\WINDOWS\SapCluster\sapgw\work" there are log files:
sapstart.log:
Starting at 2008/04/04 15:52:09
Startup Profile: "C:\WINDOWS\SapCluster\sapgw\startgw.pfl"
Starting Programs
(412) CreateProcess: c:\windows\sapcluster\sapgw\gwrd.exe
(4244) Parent Shutdown at 2008/04/04 15:52:21
(4244) kill(SIGINT 412) failed.
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice thread started, listening on port 50213
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_02
MASTERSP\cluster_service is starting R/3 System at 2008/04/04 10:28:00
SAP-R/3-Startup Program
Starting at 2008/04/04 10:28:00
Startup Profile: "C:\WINDOWS\SapCluster\sapgw\startgw.pfl"
Starting Programs
(4500) CreateProcess: c:\windows\sapcluster\sapgw\gwrd.exe
(4112) Parent Shutdown at 2008/04/04 10:28:11
(4112) kill(SIGINT 4500) failed.
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
pid 1468
Fri Apr 04 15:53:32 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 146, changelist 959468' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_02
Webservice thread started, listening on port 50213
Then, what's happening?
Thanks for all.

hi Julian,
check sapcrypto.dll is in the correct path and accessable?
please list log file here -> dev_icmmon and dev_w0.
Rgds
aRie

SAP Note 1720495 in Required to be implemented in EHP7 upgrade.

Hi Team,
During the ERP6.0 EHP7 upgrade before we release the system for SPAU activities is it mandatory to apply the SAP Note 1720495.
Source : ECC 6.0 EHP6 Target: EC6.0 EHP7
Regards
Ravi Pandey

Hi Ravi,
Do you see in SPAU Snotes with status "SAP note <no.> obsolete; de-implementation necessary"
If yes then only proceed with note implementation. Else this is not required.
Note says: When you observe such status and try to de-implement the note , it destroys the code.
So if you observe such status and want to perform de-implementation of SAP note, first implement this note and then proceed with de-implementation.
Regards,
Deepak Kori

SAP Notes Issue

Hello Experts,
Actually I had an issue while opeing SAP Standard Query, this issue is due to some missing BI Content information then I requested Basis team to apply SAP Note, they came back to me saying that SAP Note is already applied, then immediately I tried to confirm whethere that SAP Note was implemented or not in the TCode:SNOTE in the Note Assistant Browser (I followed the procedure from "SAP BW Consistency Check Guideline" document) but I couldn't find my SAP Note when I searched there. Can anybody help me out is there any alternate way to find out SAP Notes which are existing in my BW System.
Thanks,
Roger

Hi Roger,
Generally two way we can find whether sap note implemented or not
1. Goto Txn SNOTE -> there you find whther you note implemented or not, if it is implemented you can see the Tick symbol
2. Manually you can check in the system, whether the corresponding changes already done asper the SAP Note or not. If that required changes have not been done then that note is not implemented.
Hope helps.
Regards,
Kiran

BSI TUBs + SAP Notes

Hi Experts!
I was just wondering what it means to add any SAP notes when implementing BSI TUBs?
Any help would be greatly appreciated!
Thanks.

Bullein updating has 2 parts. One is that a functional consultant will go and download updates into BSI software called Taxfactory(8.0 is the latest version).
After this, the basis team must be informed that you made these changes in taxfactory and you would like them to apply corresponding patches (OSS notes) in SAP.
For every TUB #, there is a corresponding OSS patch number which means updates have to be done in taxfactory as well as SAP.
if you want to know more in detail let me know.

Is it possible to force the implementation of a SAP note?

Hi guys,
I am installing SAP CPM, software components CPD 1.0 and PICM 1.0. During the SAINT installation, I hit an error for both components in the ABAP Generation Phase. I have found two notes with automatic corrections (1843317 and 2040519) to fix the errors.
However, when attempting to implement both notes through SNOTE, it shows them as "Cannot be implemented". I am assuming this is because the software components are not fully installed yet.
I know that I can get the correction instructions from each note and manually put them in, but one of the notes has 15+ corrections. Not exactly how I want to spend my day.
Is there a way to force SNOTE to implement a note that is listed as "cannot be implemented"? If not, does anyone have a better way to get the corrections applied besides doing each one manually?
Thanks!
-Jayson

Hi,
Here i would recommend to go for correction instruction instead of searching force implementation of SAP Notes as notes are used to fix bugs under some specific SAP standard codes and affects specific programs even and only recommended if support package still to be provided by SAP.
Also need to check for the supported releases under SAP notes for performing corrections (strictly based or relevant for mentioned releases.)
Hope you will understand and will try to avoid any issues by opting any force methods to implement the SAP Notes.
Regards,
Gaurav

Issue in implementing the sap note 1401975

Hi All,
I am trying to implement the sap note 1401975 in the 4.7 version( SAP_APPL 470, Patch level 26). to implement this note i have to create a Function Module with export parameter of TYPE SEPA_STR_DATA_MANDATE_DATA. the problem here is the structure SEPA_STR_DATA_MANDATE_DATA not available in my system and no instructions are given in the note to create this structure. i have also implemented the prerequisite notes 1305012, 1360908.
your Quick response will be highly appreciated.

Reason and Prerequisites
As a prerequisite, you require Noter 1090321 for SEPA Direct Debit and the two SEPA credit transfer Notes 1305012 and 1360908. Check whether these notes have already been implemented (search in the ABAP Dictionary (transaction SE11) for the structures FPAYHX_MDT and FPM_SEPA and check in transaction SE37 whether the function DMEE_EXIT_SEPA_21 already exists) and implement them if necessary.
To be able to use the B2B (Business to Business) function, you also require enhancements in the SEPA third-party management (SAP Basis) that are delivered in a separate note.
Check this prerequisite notes 1090321, 1305012 and 1360908 and its corrections present in your system
Edited by: praveen reddy on Feb 1, 2011 2:47 PM

Related to SAP Notes Implementation

Hi Guys,
I have a dbt and need a clarification on SAP Note.
How I will be able to know by seeing the SAP Note or how I can judge my self that either (SAP Note) should be implemented thru manually or using SNOTE transaction.
Regards,
Ravi Ganji

hi Ravi,
SNOTE Transaction is available from 4.6C version owards only ... and to know whether you have to apply it manually or through SNOTE you will have to confirm it by the user ... for details refer
OSS Note
http://www.sappoint.com/basis/.pdf
http://www.sap-img.com/basis/oss-notes.htm
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
Regards,
Santosh

SAP Notes status can't be implemented?

Hi All
I would like to know, why few SAP notes status can't be implemented.
your view will be appreciated and will rewarded with <<removed by moderator>>.
Regards
Madhavi
Edited by: kishan P on Sep 1, 2010 1:03 PM

HI
Some SAP note can be implement manually and some are can be implement through the T-Code SNOTE
once you go to the look at the sap note it provide the instruct how to implement ,
when you go to SNOTE T-code in the GOTO> DOWNLOAD SAP NOTE once u click it you have to download SAP note direcly in to SNOTE and you can directly implement .
if its not downloading to this place you have to do it manually from taking the access key from SAP .
Regard
nawa

How to know side effects of implementing an SAP Note

Hi All,
Im new in implementing SAP Note.
Kindly suggest how to analyize whether implementing an SAP Note will cause some side effect.
How to do that ,I think just by looking at code can we assure that there will be no side effects.
Kindly suggest.

hello,
the easiest way is to implement note and check the functionality manually for example execute transaction and post document or you could open the correction object (ABAP code) and analyse the correction which ll be imported and how those changes will effect your systems work. if you implemented the note and you noticed that corrections destroyed your previous functionality then you could rollback the note in your development system.
best regards
dez_

Questions about SAP Note Implementation

I have never implemented SAP note before. We are on ECC 5.0 and want to implement note 1041579. I looked at the correction instructions for the note and it says
Prerequisites
Note                                                             Correction
0000795865
Enh in the FI interface for revenue recognition 0120031469 1 0000455384
                                                                   0120031469 1 0000455385
                                                                   0120031469 1 0000455391
I have following questions.
1. Does it mean that I need to implement note 0000795865 before I implement 1041579, also what do the Corrections mean? Are these some other notes I have to implement
2. How can I see what notes have already been implemented in the system and which are not?
Will certainly award points for the right answer

Hi Srikrishna,
Does this mean that all these other notes (761173, 847204, 795865) should be implemented before 1041579.
Ans : There are normally pre-requisities for any note and again that pre-requisite note will have many more pre-requisite notes. It doesnt mean that we have to implement all those notes. See whether that specific note is applicable for the version and package that you are using. Also do a search as I have told you to see whether that note has already been applied.
Also the prerequisite for 795865 is 847204 how can that be the note number 847204 is greater than 795865?
Ans : Note numbers doesnt need to be ascending. I am not sure how a note gets its number, but definetly they dont need to be in an ascending order.
Regards
Aneesh.

Issue with SAP Note Implementation 977220

Hi ALL,
             I am trying to implement the SAP Note: 977220 for the Report RFIDPL06 (FI Localization for the Country Poland).
While trying to implement the SAP Note: 977220, the system (version 4.6 C) successfully implements (Green Traffic Light) the following SAP Notes: 975358, 990307 & 1016797 as a pre-requisite. However after that when the system is trying to implement the SAP Note: 977220; it's showing the yellow traffic light because it can't find the followings:
1. Context Block (Not Found)
    IF documents-egrkz = '9' OR documents-egrkz = '2'
      IF documents-ktosl = 'ESE'.
        doc_sum-tax = '0'.
        APPEND doc_sum. "943278
      ENDIF.
2. Delete Block (Not Found)
      COLLECT doc_sum. "943278
What can I do to resolve the issue ?? Any help will be highly appreciated!!
BR.
Tanmoy

Dear ALL,
                  I have currently raised a OSS mesage to the SAP support.
BR.
Tanmoy

Sap Note:792372 Implement?

Similar Messages

Maybe you are looking for