SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT

Hello Experts,
I need to implement the FM CONVERSION_EXIT_MATN2_OUTPUT ( + Conversion routine MATN2 ) in our SAP system version 4.7. Can anyone tell me if there are any specific SAP note for implementing it.
Note: Our SAP system dont have DI software component. I want to implement the FM without going for DI.
Awaiting reply,
Thanks,
Balaji
Edited by: Balaji on Jan 19, 2009 11:59 AM
Edited by: Balaji on Jan 19, 2009 1:02 PM

Thanks.

Similar Messages

Do we need to install SAP Portal for implementation of ESS & MSS

Hi All,
We are implementing SAP (ECC 6.0) for one of our client, Due to some contractual limitations, we do not want to implement SAP portal though it is a part of standard delivery, I want to know that is it absolutely necessary to install and implement SAP portal for implementation of ESS & MSS.
What i know and understand is that with the new architecture ESS & MSS can be deployed and accessed as a stand alone application on an internet browser by (Web dynpro client) without any need of enterprise portal. While ESS & MSS application can be hosted on Web application server.
Please validate my understanding if it is correct, Also does the new Web dynpro based client support all the functionality and authorization related issues for ESS & MSS ??
Regards
Amit Ajmera

Hi Amit,
Yes, you can run ESS/MSS as WebDynpro application without having to deploy on Portal. However, the look and feel and user accessibility is much better when deployed as Portal page. For WebDynpro, you will still need to publish the individual URL link to application somewhere...
Another point is that on portal you can deploy standard Business package specific to ESS and MSS which contains lots of readymade iviews/page/roles etc so it can reduce your development cost dramatically.
But, at the end it all depends on your individual requirement and project scope.
Cheers !!
Satya.
PS: Points always encourage me to reply...:-)

SAP NOTE for Error in MB01

Hi,
I am searching for a SAP NOTE for an Error in MB01
Error is :Check Table BIWE: Entry 0004 not found.
Please let me know if anybody implemented note for this error.
Iam searching in SAP Marketplace but didn't find the right one.
<removed_by_moderator>
Thanks,
Rhea.
Edited by: rhea on Jul 24, 2008 4:21 PM
Edited by: Julius Bussche on Oct 7, 2008 5:09 PM

Error No is M7001.
This error is raised when the internal table BIWE and MSEG doesn't match ie. biwe-zeile NE mseg-zeile.
I searched with those keywords (BIWE , MB01) but didn't find the right one.
Regards,
Rhea.

Std SAP Quetionaire for Implementing for WM & Batch Management

Hi Friends
Can you help me for Std SAP Quetionaire for Implementing for WM & Batch Management. As i want to implement Batch Mangement & Warehouse Management in Client System.
The Document i am looking for shall be roadmap in order to fully utilize the availble functionalities.
Please Help ASAP.
Thanks
Saurabh

Dear Saurabh,
Don't take it other-wise, But my Approach is Far-Far Different from Others:
In any Implementation, for any Software Module, Two Important Aspects:
1. Knowledge about that Particular Software/ Module. Functionality-wise, You must know the Capabilities of Software -
a. What Process can be Mapped, in Standard Package
b. What Process can be mapped via Customization
c. What could not be achieved i.e. System Restrictions
2. One must be able to understand Clients' Industry-Specific Business Processes and Requiremements.
Untill-Unless, One is not able to Clearify himself on above Two-Basic-Points, How could he able to resolve/ assist others?
Also, Its not like that one fine day, I got-up and find myself in Consultant's Shoes. I think, Your Company must have provided Basic Assistance, in order to groom, as per your Profile.
Consult your Senior Consultants - WM (MM) for the same.
Best Regards,
Amit
Note: I, myself, upgrading as BW Consultant from SD-Consulant, for an Upcoming Project. A sufficient Time-Frame is being provided my Org., in advance as well as, proper guidance has been provided by my Senior-Mates, at my Professional-end.

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

What is the new sap note for Ptax slabs of FY 2011-12.

Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.

Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha

SAP Note for XD99 : Data changed but Output screen show error message

This is regarding the XD99.. Mass data update.
I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
Is there any Sap Note for this.
Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
Moderator message: please have a look in the Service Marketplace yourself.
Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

Hi there, gwinslo. You have come to the right place.
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
This is not a cure but will make it easier if Firefox locks up.

SAP Note for iw32

Hi,
Good day guys
Ive the user exit for iw32 for creating the settelment rules. iam getting all values except cost center. Right now we are using Ecc 6.0.
Plz let me know if any sap note for iw32 to get the cost center value.
Regards

Hi,
I tried to find some oss message but there is only one SAP note 1250669 related to your problem. Please check this one.
But looks that i has been published on 09.2008. So it might be in your system already.
Regards,
Lokesh.

SAP Notes for Revaluation

Dear All,
I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object? Do you ever know which SAP Notes for revaluation Joint Venture (GJ91) which is explaned that this program only display the standard and we cannot add some new field in this screen? Please share if you know this notes.
Thanks,
Jones

1. I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object?
https://service.sap.com/sap/support/notes/949971
Please also check the related notes in the above note.

Regarding SAP notes for Budget-2007

Hi all
can anybody tell me the sequence the sap notes for budget 2007
as our client using 4.6 C version of SAP
helpful answer will get awarded
Thanks in Advance

hi Santosh
thanks for reply really valauable answer u have given
actually we r going to implicate the CIN for Budget -2007 and the current pacakge they r using is SAPKIPNG07
could u tell me please how to upgrade the Patch level actually i didn't do any upgrade but i will have to do
please give me the response of this
thanks

Need for Sap Notes Downloads & implement

Now for upgrade from 4.6B to CC 6 ,if note/notes for corresponding object in SPAU list is/are not present under Note Corrections root...Do we have to download it and then implement it ...IF yes then how does it get implemented for that particular object..is it automatically done or do we have to give Object Name and its details anywhere..Please do explain and elobarate on it.

yes..you are right..
OSS note automatically implements .. you need not give any object details...
to download and implement ..
use tcode SNOTE.
click on download button ..then enter required note number ..after download it'll be stored in 'New' tab... place cursor on note number then press 'F8'( execute button).
It automatically implement note..and creates transport request as well...

SAP NOTE for COMPUTE_BCD_OVERFLOW in include LM60EF0C

Hello friends,
I am getting dump COMPUTE_BCD_OVERFLOW in include LM60EF0C of standard program SAPLM60E.
Error position --> ADD L_PBET-PLNMG TO LV_GESAMT_PLNMG.
The above code is added in sap program in note 671875.
I am not getting any correction note for 671875 note to avoid dump.
Please let me know if you knows any correction note for 671875 note.
Thanks in advance.
Edited by: lovely_yp on Dec 22, 2011 9:20 AM

Hi,
@Srikishan : Correction note 561614 you suggested is for include LM60EFXS,
             But i want correction note for include LM60EF0C.
             SAP system component version --> SAP ECC 6.0
@Siva Kumar: Correction note 671875 is already implemented in program,
             Now I am facing the problem in the code of note 671875.
             Hence i need correction note for the already implemented note 671875.
Thank you.
Edited by: lovely_yp on Dec 23, 2011 7:45 AM
Edited by: lovely_yp on Dec 23, 2011 7:49 AM

Any SAP Note for RFC Error between BI and ECC 5.0

Hi..
the RFC Destination between BI and ECC 5.0 is giving errors.
Plz let me know if there is any Support pack or any solution to fix this error.
thanks..

Hi,
pls find the RFC connection details
1 Prerequisites
1.1 User Roles
Use
With the Building Block Connectivity a configuration role for each component is provided to access all transactions relevant for the installation. The following roles are available:
Technical name Description File name for upload
B02_01C B02 - Connectivity Configuration Role (SAP R/3) B02_01C.SAP
B02_03C B02 - Connectivity Configuration Role (SAP BW) B02_03C.SAP
C71_04C B02 - Connectivity Configuration Role (SAP CRM) C71_04C.SAP
B02_04C_SRM B02 - Connectivity Configuration Role (SAP SRM) B02_04C_SRM.SAP
Procedure
Please upload the necessary roles and add them to your user, using transactions PFCG (Role Maintenance).
2 Local Settings
This chapter describes all local settings that are necessary for each component like SAP R/3, SAP SCM, SAP BW, SAP CRM or SAP SRM.
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu Define Client Administration (SAP R/3)
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
Then carry out the following steps:
1. Choose Display  Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
u2022 Automatic recording of changes
u2022 Changes to Repository and cross-client Customizing allowed
u2022 eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code SPRO
SAP R/3
IMG Menu Basis Components (for R/3 Enterprisse: SAP Web Application Server)  Application Link Enabling (ALE)  Sending and Receiving Systems  Logical systems  Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
where XXX is the system name
and NNN is the client.
5. Save your entries.
A transport request for Workbench appears.
6. Select an existing request or create a new request, if necessary.
A transport request for Customizing appears.
7. Select an existing request or create a new request, if necessary.
2.1.3 Assigning Logical System to Client
Use
The purpose of this activity is to make an assignment for the logical system. Skip this activity if a logical system is already assigned to your client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Assign Logical System to Client
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Choose Display ® Change.
3. Confirm the warning message The table is cross client.
4. Select your R/3 client and choose Details.
5. Enter the name of the logical system of your SAP R/3 client.
6. Save and confirm the warning message Be careful when changing the logical system.
7. Choose Back twice.
2.1.4 Creating an RFC User (SAP R/3)
Use
To enable communication between the SAP R/3 back-end system and the SAP SCM System, you have to create an RFC user in the SAP R/3 System.
The RFC user in the application client enables multiple RFC connections. Skip this activity if an RFC User has already been created.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Creating an RFC User (SAP R/3)
Transaction Code SU01
SAP R/3 Menu Tools  Administration  User Maintenance  Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
SAP_NEW
S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
2.3 SAP BW
2.3.1 Define Client Administration
Use
This activity defines changes and transports of the client-dependent and client-independent objects.
Procedure
1. To perform this activity, choose one of the following navigation options:
SAP BW Role Menu Local Settings ® Define Client Administration
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Switch to change mode.
3. Select your client.
4. Choose details.
5. In field Currency enter the ISO-code of the local currency, e.g. USD or EUR.
6. In field Client Role enter Customizing
7. Check the settings for changes and transport of client-specific objects and client-independent object changes
If you want to use the settings made by BC-Sets or manually in other systems (other than BW), u201CAutomatic recording of changesu201D and u201CChanges to Repository object and cross-client Customizing allowedu201D is required.
Result
Client administration has been defined to support the installation using Best Practices.
2.3.2 Defining a Logical System for SAP BW (SAP BW)
Use
In this step, you define the logical systems in your distributed system.
Prerequisites
Logical systems are defined cross-client. Therefore cross-client customizing must be allowed in your client (this can be checked in transaction SCC4).
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Defining a Logical System for SAP BW (SAP BW)
Transaction Code SPRO
IMG Menu SAP Reference IMG  SAP Customizing Implementation Guide  SAP NetWeaver  Business Information Warehouse  Links to other Systems  General Connection Settings  Define Logical System
1. A dialog box informs you that the table is cross-client. Choose Continue.
2. On the Change View u201CLogical Systemsu201D: Overview screen, choose New entries.
3. On the New Entries: Overview of Added Entries screen enter the following data:
Field name Description R/O/C User action and values Note
Log. System Technical Name of the Logical System Enter a name for the logical BW system that you want to create
Name Textual Description of the Logical System Enter a clear description for the logical BW system
4. Choose Save.
If a transport request for workbench and customizing is displayed choose existing requests or create new requests.
If you want to continue with the next activity, do not leave the transaction.
Result
You have created a Logical System Name for your SAP BW client.
2.3.3 Assigning Logical System to Client (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW
Role Menu Assigning Logical System to Client (SAP BW)
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
1. In the view Display View "Clients": Overview, choose Display.  Change
2. Confirm the message.
3. Select your BW client.
4. Choose Details.
5. In the view Change View "Clients": Details, insert your BW system in the Logical system field, for example, BS7CLNT100.
6. Save the entries and go back.
2.3.4 Opening Administrator Workbench
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Modeling  Administrator Workbench: Modeling
Transaction Code RSA1
1. In the Replicate Metadata dialog box, choose Only Activate.
2. If a message appears that you are only authorized to work in client ... (Brain 009) refer to SAP Note 316923 (do not import the support package, but use the description under section Workaround).
2.3.5 Creating an RFC-User (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Creating RFC User
Transaction Code SU01
SAP BW Menu Tools  Administration  User Maintenance  Users
Then carry out the following steps:
1. On the User Maintenance: Initial Screen screen:
a. Enter the following data:
Field Entry
User RFCUSER
b. Choose Create.
2. On the Maintain User screen:
a. Choose the Address tab.
b. Enter the following data:
Field Entry
Last Name RFCUSER
Function Default-User for RFC connection
c. Choose the Logon data tab.
d. Enter the following data:
Field Entry
Password LOGIN
User type System
e. Choose the Profiles tab.
f. Enter the following data:
Field Entry
Profiles SAP_ALL , SAP_NEW and S_BI-WHM_RFC
g. Choose Save.
Do not change the password of this user as it is used in RFC connections.
2.3.6 Define RFC-USER as default (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Role Menu Define RFC-USER as default (SAP BW)
Transaction Code RSA1
SAP BW Menu Modeling  Administrator Workbench: Modeling
1. On the Administrator Workbench: Modeling screen choose Settings  Global Settings.
2. In the Global Settings/Customizing dialog box choose Glob. Settings.
3. On the Display View u201CRSADMINA Maintenance Viewu201D: Details screen:
a. Choose Display  Change.
b. Enter RFCUSER in the BW User ALE field.
c. Choose Save.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

SAP Note for new Objects

Hi,
Say I have added a new Class in my Package and want to provide it to the Customer via a SAP Note. Will implementing the Correction Requests automatically create the Class for the Customer?. Or should I mention this as a manual step like providing the name of the class and asking the Customer to create it and then apply the Correction Instructions.How does this work?.
Kindly let me know.
Regards,
Praveen

Hi Praveen,
Yes you are right the correction instructions can't create the class. Sorry for earlier thread.
You have to put that in note instruction the detailed step as how to create class and with all the details such as description etc.
Also make sure that the key for creation of the object should be there in the note.
If it is customer spcific note then give the intructions as to get the key etc.
Regards,
Atish

SAP Note de-implementation process

Hi ALL,
I just want to know the process of de-implementing an SAP Note, which might have several dependent SAP Notes installed as a pre-requisite. What I mean is; Say If i implement an SAP Note A, before system implements the SAP Note A it will load SAP Note B as a pre-requisite. How can we de-implement all of them successfully ?
BR
Tanmoy

Hi ALL,
I found the following extract in SDN wiki:
It may happen that you try to de-implement an SAP note via T-cd:SNOTE > u201CSAP Noteu201D > u201CReset SAP Note Implementationu201D, but finally you find that it does not work or fails with error.
It is not recommended to de-implement any SAP note which has been already implemented completely. The reason is that even you de-implemented it now, the corrections would be implemented sooner or later again by corresponding support package implementation in the future.
If you want to de-implement any SAP note, please donu2019t do it yourself. Please contact SAP support. SAP will judge whether it is really necessary to de-implement the SAP note or not, and de-implement it for you in necessary.
SAP is developing new tool to replace Note Assistant. De-implementation function is not to be integrated into this new tool, which means that it will be impossible to de-implement any already-implemented SAP note using the new tool.
BR ,
Tanmoy

SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT

Similar Messages

Maybe you are looking for