SAP Note manual changes

Hi experts,
i got requirement to change data type and length of fields NO_OF_PART1 in structure J_1iEXHEAD.
So, please any one advice me how to change these and generate the request as the changes are mentioned in SAP note 1314399.
Please kindly advice me how to find whether this note is implemented or not.
I hope im clear with my problem.
advance thanks
vijay

Hi suresh,
thank you for your quick response.
Do I need to take access key to make the necessary changes in structure?
Please tell me one more thing how to check wheather this note got implemented or not.
thank you
vijay

Similar Messages

Modification problems while applying SAP Note manually

Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.

If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note

Regarding SAP Note- Manual/Automatic Implementation.

Hi Experts,
We have few OSS Notes related to Archiving. Is there any thing specifically mentioned in the note about the type of implementation(Manual or Automatic). I mean ,how do we know whether a note should be implemented manually or automatically ,or both the ways.Generally if it is manual we should require an access key for manual implementation if automatic is not possible.Please correct me if i am wrong. Please suggest
Best Regards,
Lakshman

Hi,
please look at the item SOLUTION in the SAP note (immediately before the header data).
There you can find all actions to do, actions before SNOTE, actions after SNOTE, ...
But there are more problems if your notes need other related notes, which will be downloaded automatically.
Look into all of them before implementing the SAP notes for manual actions!
Regards,
Klaus

Problem during implementing SAP note manually

HI
I am implementing a note manually, which have instruction like below
Manual Pre-Implement.
VALID FOR
Software Component   SCMSNC                         Supply Network...
Release 700          Until SAPK-70006INSCMSNC
Release 701          Until SAPK-70101INSCMSNC
o Open BAdI /SCF/CSV_SETTINGS in SE18
- Add the following 2 methods to interface /SCF/IF_EX_CSV_SETTINGS:
CHANGE_INPUT_ENCODING
CHANGE_OUTPUT_ENCODING
But when I go till point I can able to add the method as it is grayed out
Is there any reason or different way of implementing the note manually?
Regards
Dev

To implement note manually you need to get the access key. Once you give the access key you can apply the note corrections.

SAP Note 1408782 changes PSAVE-behaviour in Dynamic Actions

If anyone find any solution to fix this problem.
Thank you

Hi Sarah,
Thank you for reply. We did not use PSAVE in insert mode. We use for Plausibility Check .
After applying these 2 notes we are totally lost our code. SAP told us to apply another note 1459267 but it did not help.
Here is our Dyn action triggering with employee group/subgroup change.
0171              BSTAT     04     1     P     P0171-BSTAT='G001'
0171              BSTAT     04     2     P     PSAVE-BSTAT='G003'/X
0171              BSTAT     04     3     P     PSAVE-BSTAT='G002'/X
0171              BSTAT     04     4           *EMPLOYEE NOW ELIGIBLE FOR BENEFITS, CREATE 0378
0171              BSTAT     04     5     I     INS,0378,EMPL,,(P0171-BEGDA)
0171              BSTAT     04     10     I     INS,0378,FSAO,,(P0171-BEGDA)
0171              BSTAT     04     12           *CHANGES FOR 2ND PROGRAM GROUPING
0171              BSTAT     04     13     P     P0171-BSTAT='G003'
0171              BSTAT     04     15     P     PSAVE-BSTAT='G001'
0171              BSTAT     04     16           *EMPLOYEE NO LONGER ELIGIBLE FOR BENEFITS, DELIMIT
0171              BSTAT     04     17     I     LIS9,0167,,,(P0171-BEGDA),(P0171-ENDDA)
0171              BSTAT     04     18     I     LIS9,0168,,,(P0171-BEGDA),(P0171-ENDDA)
0171              BSTAT     04     20     F     GET_P0170_ENDDA(ZDYNACTION)
0171              BSTAT     04     21     I     LIS9,0170,,,(RP50D-DATE1),(P0171-ENDDA)
0171              BSTAT     04     22     F     GET_P0377_ENDDA(ZDYNACTION)
0171              BSTAT     04     23     I     LIS9,0377,,,(RP50D-DATE1),(P0171-ENDDA)
Thank you again,
Renata

SAP Note 1374976 - Q3/2009: Functional changes for U.S.

Hi Experts,
Can you please let me know what exactly this SAP note does to the Texas SUI report?
After implementing the SAP note, what changes am I looking forward for?
Thanks in advance,
Soujanya.

Hello,
After some searches I have found that the corrections delivered in the
Q-3 notes:
o The "Employee Name" column in the Employee correction form the
employees´ first name are concatenated.
o Also, when you have more then one employee, the first name and the
SSN that appears in the field was repeated in the others lines.
Hope this help
Sarah

SAP note validity

Hi experts,
I've read that SAP notes are changes to standard code which are to be included in the next release. I was approached by a team to implement a SAP note; upon checking the validity the note is only applicable to previous SAP versions. Our system is a more recent one. When I check the SAP note in SNOTE, it says "can be implemented". My question is, is this note applicable? Should I follow the validity section of the SAP note? Or can I implement this because it's status says so in SNOTE?
Thanks in advance.

Hi Jack,
sometimes SAP notes are containing some wrong informations. For example if a SAP note is only valid for other releases, but contains a correction instruction for your release, which is valid for your support package level, then you can try to implement it. Many incorrect informations in SAP notes come from SAP version updates, when the note says, it is valid for release x SP level from a to b and correction instruction says, it is valid for release x SP level from c to d.
But please check carefully, that all manual activities can be done and all additionally required notes and their manual activities can also be implemented (or are obsolete).
If you get an installation error, please uninstall the note after installation (if this is possible).
There are many possible errors and issues that may occur:
Correction instruction is already partially implemented
You get activation errors, for some business functions are not active (Switch Framework). In this case you may be unable to uninstall the note without errors.
and many more
If you're thinking that the note will help you to solve an issue, please try to implement it. In case of error you should feel free to contact SAP support.
Regards,
Klaus

Implement SAP note while upgrade is running

Hello Folks,
In our upgrade, during our downtime phase, we are running into an issue that requires an SAP Note implementation. We started our main instance, but when we go into SNOTE transaction, it is not allowing us to implement any notes. It gives the message "cannot implement/deimplement SAP notes; upgrade is running"
We already tried commands tp unlocksys, tp unlock_eu, but nothing works. We are already past shadow instance switch, so unlocking shadow instance is no good.
Can anyone provide any inputs on how to overcome this issue?
Thanks!

Hi Fahad,
I think you have to implement the correction included in sap notes manually during upgrade.
You can refer to note 1369430. In this note, it is said that:
3. Now use a modification to change the source code for the function
    module ENH_MASS_ACTIVATION and the method
    CL_ENH_TOOL_HOOK_DEF->IF_ENH_OBJECT~AFTER_IMPORT as described in the
    attached correction instructions. You cannot currently use the Note
     Assistant SNOTE to do this. Activate this change.
So you see that it is not possible to use SNOTE during upgrade even after using unlocksys
and unlock_EU command.
Regards
Julia

Implementing SAP Note 386508

Hello Gurus,
May I know how to implement this OSS Note? Will it be done through SNOTE or manually? This is my first time to handle OSS Note implementation. Your help is much highly appreciated..Thanks in advance!

Hi Andrei,
Manual Correction is also a Easy way and cost you very less than SNOTE (Automatic Update).
Just goto the OSSNote (www.service.sap.com) Use your OSS ID to View the note.
Now check the Application Component & Choose that Correction.
In the correction window It is very clear in which Standard Program And in which part you need to delete & replace very clear...
I Feel A Newbie can also do the corrections in SAP Notes Manually.
If it asks for a Acces Key for Correction(change) Then consult your Basis team they will provide you one.
Thanks & regards,
Dileep .C
Note 386508 - Information: Use of the automatic parallel processing
This note has no corrections to do with ABAP,,,,! Also You many need to check the related Notes or Prerequisites if Avaliable...!
Related Notes
1043139 - PRA Checkwrite Parallel processing
660360 - Performance improvements for creating and assigning orders
397799 - INFORMATION: CO-OM-OPA (Order & Project Accounting)
Edited by: Dileep Kumar Chinnaiah on Jun 18, 2009 11:44 AM

How to Upload SAP notes

How to Upload SAP notes in the system.
Can anybody tell me the step by step procedure.
Thanks & Regards
Mayank Tyagi

Hi,
Go to Tr Code.<b>SNote</b>
1. Check the OSS no whether already been downloaded or not,
2. if not download it
3. it will be in the New tree.
4. FInd your note and double click on the same. then Pdf will open
5. Read it properly check whether it can be implemented it or cn not be implemented
6. If can be implemented then implemetnte the note and create a request for the same.
7. once implemented then go to consistant portion then change the status of the Notes for this you need to go to the SAP Note and change the note processing status to completed.
<b>
Note</b> : Soms times the SAP tells to download the files from the Service.sap.com and for some notes u need to create a field or new objects. For this u need to get the Access key from ur team and change the same.
Lastly go inside the report and check whether the changes have been done or not.
sometimes changes may not be there. this will lead to problem
Hope this will help you
Sail

Implement SAP Notes

Hi to all,
Can u please tell me about the following:
· Implement SAP Notes No. 730527 to display the error message 330 "Price of goods movement will become negative"

Are you familiar to implementing OSS Notes. Your message asks to implement OSS Note.
Here are details for how to implement an OSS Note. Hope this helps,
Go to Tr Code.SNote
1. Check the OSS no whether already been downloaded or not,
2. if not download it
3. it will be in the New tree.
4. FInd your note and double click on the same. then Pdf will open
5. Read it properly check whether it can be implemented it or cn not be implemented
6. If can be implemented then implemetnte the note and create a request for the same.
7. once implemented then go to consistant portion then change the status of the Notes for this you need to go to the SAP Note and change the note processing status to completed.
Note : Some times the SAP tells to download the files from the Service.sap.com and for some notes u need to create a field or new objects. For this u need to get the Access key from your team and change the same.
Lastly go inside the report and check whether the changes have been done or not.
sometimes changes may not be there. this will lead to problem
Check this thread for more details.
How to Implement OSS note
Reward if this helps.

How to know whether the changes are implemented by sap or not(not manually)

Hi,
On 4.7 version in some standard objects(SAP Objects) some changes are done by custom by using modification assistance.
On ecc 6.0 version I need to know whether the same changes are done by custom or sap? ( not manually)
Let me know is there any process to know the changes done by sap or custom on ecc 6.0.
Thanks,
Radhika

Hi ,
u can check for entries in table ADIRACCESS.
Regards
prabhu

SAP Note implemetation - SNote or manually

Recently for Budget 2007-08 for India SAP has released a master note which has a series of notes to be implemented. These notes includes screen, DDIC and coding changes.
As far as I know screen & DDIC changes has to be manually implemented. For coding related changes if Snote status is "Can be implemented" should one implement through Snote or manually.
Kindly suggest the merits and demerits of these techniques.
Thanks
anu

Hi Ani,
After downloading the SAP Notes: Check the implementation Status. If it is "Can be Implemented" then the SAP Notes is suitable for implementation in your system.
Read the SAP Note carefully, this is mandatory there can be any other pre-requisite notes or some other notes that might have to be implemented along with this note which'll be explained in the SAP Note. Once you have gone through them.
Implement all the Pre-requisite notes and follow the Manual steps that are specified in the note. Once all the manual steps are implemented.
Click on the "Implement SAP Note" button to implement the SAP Note. you may get a pop-up here to read the SAP Note, say "YES". Now all the code corrections will be placed in the system in which you are implementing. The Activation pop-up will appear with all the objects that have been changed with the Code Corrections.
Click enter. Now the implementation of SAP Notes is completed. The implementation status changes to "Completely Implemented". Change the processing status to "Completed".
Please let me know if further details are required.
Thanks & Best Regards,
Goutham.

Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

Please disregard this question. I'll submit a shorter and more direct question. Thanks.

HT4864 My old MobileMe account is not accepting any of my passwords to get in and manually change my account to iCloud...how do I find out why or what password works? It won't give me a choice to change my password either. Help!

My now old MobileMe is not accepting my password, so I can't get in to manually change my account to iCloud on my 10.6.8. It doesn't give me the option to reset my password...I'm just denied access...HELP!

Look up your old and forgotten Apple ID

SAP Note manual changes

Similar Messages

Maybe you are looking for